Used Twin for sale (3,104)

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH twin-shaft concrete mixers are industrial mixing systems that combine high efficiency and durability. Thanks to their robust chassis structure, powerful twin-shaft mixing mechanism, and optimized paddle arrangement, they homogenously blend all aggregate, water, and cement mixtures. This allows for the production of high-strength concrete with a low water/cement ratio while minimizing mixing time. The mixer's spiral mixing system directs aggregates towards the center, ensuring complete uniformity and enabling the production of concrete of consistent quality in every batch. Its twin-shaft design maintains fluidity even in highly viscous mixtures, delivering superior performance in heavy-duty applications such as precast, block, and dam concrete. All models are equipped with modern safety and maintenance features, including an automatic lubrication system, maintenance covers with safety sensors, and a hydraulic discharge cover. Twin-Shaft Concrete Mixer Technical Specifications MODEL NO: CTS-1 Loading Volume: 1,500 liters Fresh Concrete Volume: 1,250 liters Compacted Concrete Volume: 1,000 liters Engine Power: 37 kW Side Body Wear Plates: 15 mm Hardox Main Body Wear Plates: 15 mm Ni Hard Godpfx Aoxpi Utjn Rebl Mixing Arm Wear Plates: 25 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-2 Loading Capacity: 3,000 liters Fresh Concrete Volume: 2,500 liters Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Side Body Wear Plates: 15 mm Hardox Main Body Wear Plates: 20 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-3 Loading Volume: 4,500 liters Fresh Concrete Volume: 3,750 liters Compacted Concrete Volume: 3,000 liters Engine Power: 2 x 55 kW Side Body Wear Plates: 20 mm Hardox Main Body Wear Plates: 20 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-4 Loading Volume: 6,000 liters Fresh Concrete Volume: 5,000 liters Compacted Concrete Volume: 4,000 liters Engine Power: 2 x 75 kW Side Body Wear Plates: 25 mm Ni-Hard Main Body Wear Plates: 25 mm Ni-Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-5 Loading Volume: 7,500 liters Fresh Concrete Volume: 6,250 liters Compacted Concrete Volume: 5,000 liters Engine Power: 2 x 90 kW Side Body Wear Plates: 25 mm Ni Hard Main Body Wear Plates: 30 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available

Condition: new, functionality: fully functional, color: other, Year of construction: 2026, CONSTMACH twin-shaft concrete mixers are industrial mixing systems that combine high efficiency and durability. Thanks to their robust chassis structure, powerful twin-shaft mixing mechanism, and optimized paddle arrangement, they homogenously blend all aggregate, water, and cement mixtures. This allows for the production of high-strength concrete with a low water/cement ratio while minimizing mixing time. The mixer's spiral mixing system directs aggregates towards the center, ensuring complete uniformity and enabling the production of concrete of consistent quality in every batch. Its twin-shaft design maintains fluidity even in highly viscous mixtures, delivering superior performance in heavy-duty applications such as precast, block, and dam concrete. All models are equipped with modern safety and maintenance features, including an automatic lubrication system, maintenance covers with safety sensors, and a hydraulic discharge cover. Twin-Shaft Concrete Mixer Technical Specifications MODEL NO: CTS-1 Loading Volume: 1,500 liters Fresh Concrete Volume: 1,250 liters Gbodpfx Anexp U The Rel Compacted Concrete Volume: 1,000 liters Engine Power: 37 kW Side Body Wear Plates: 15 mm Hardox Main Body Wear Plates: 15 mm Ni Hard Mixing Arm Wear Plates: 25 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-2 Loading Capacity: 3,000 liters Fresh Concrete Volume: 2,500 liters Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Side Body Wear Plates: 15 mm Hardox Main Body Wear Plates: 20 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-3 Loading Volume: 4,500 liters Fresh Concrete Volume: 3,750 liters Compacted Concrete Volume: 3,000 liters Engine Power: 2 x 55 kW Side Body Wear Plates: 20 mm Hardox Main Body Wear Plates: 20 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-4 Loading Volume: 6,000 liters Fresh Concrete Volume: 5,000 liters Compacted Concrete Volume: 4,000 liters Engine Power: 2 x 75 kW Side Body Wear Plates: 25 mm Ni-Hard Main Body Wear Plates: 25 mm Ni-Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-5 Loading Volume: 7,500 liters Fresh Concrete Volume: 6,250 liters Compacted Concrete Volume: 5,000 liters Engine Power: 2 x 90 kW Side Body Wear Plates: 25 mm Ni Hard Main Body Wear Plates: 30 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available

Condition: not inspected (used), Year of construction: 2007, functionality: unexamined, cutting height (max.): 110 mm, workpiece length (max.): 2,200 mm, workpiece width (max.): 4,300 mm, Equipment: CE marking, TECHNICAL DETAILS Maximum panel width: 4,300 mm Maximum panel length: 2,200 mm Maximum cutting height: 110 mm Maximum feed rate: 100 m/min Main saw blade protrusion: 120 mm Number of grippers: 9 Saw Unit Motor power (saw unit): 18 kW Motor power (scoring unit): 2.2 kW Maximum feed speed: 150 m/min Godpfeyqydcox An Rebl MACHINE DETAILS Control system: Windows XP Machine programming software: OSI FEATURES Quick saw blade change Second flexible pusher Panel rotation station Loading of thin sheets CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is, and as inspected”) on the basis of photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination address. External reference: 8158

Year of construction: 2012, condition: ready for operation (used), An air-cooled monoblock water chiller Green Box for the plastics industry is available. Cooling capacity: approx. 20 injection molding machines, power: 25kW, refrigerant circuits: 2, refrigerant: R407C, cooling capacity: approx. 80kW, air flow rate: approx. 16500m³/h. Machine dimensions X/Y/Z: approx. 3300mm/1100mm/2100mm, weight: approx. 1300kg. Documentation available. An on-site inspection is possible. Gedpfx Anjyvuuns Rjbl

Condition: ready for operation (used), Year of construction: 2000, operating hours: 61,000 h, machine/vehicle number: 04800000401, Sales only within EU Godpfx Ashv H Hysn Robl Please give us your quote for the machine ----- Without packaging; Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations.

Condition: ready for operation (used), Year of construction: 1981, power: 45 kW (61.18 HP), cutting height (max.): 200 mm, shaft diameter: 65 mm, chain width: 340 mm, Double-shaft multiblade saw Manufacturer: Raimann Gedpfx Aneyhlubj Rebl Model: KD Chain width: 340 mm Cutting height: 200 mm Saw motors: 2 x 45 kW Shaft diameter: 65 mm Electric height adjustment Transport chain with spikes Feed system modernised to stepless speed adjustment via potentiometer, approx. 0 to 40 m/min. Includes 3 saw sleeves with saw blades, some fitted with new saw blades.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 0 kg Gbjdpfovz E S Nsx An Rsl Total power requirement 0,5 kw

Condition: used, first registration: 11/2007, Year of construction: 2007, GERGEN JUNG 2 - axle trailer for skip containers / containers, twin tires, air suspension • ABS • 2 x air-suspended 9-ton Mercedes axles • Disc brakes • Twin tires • Lift/lowering system • Axle load: 2 x 9,000 kg • Gross vehicle weight: 18,000 kg • Curb weight: 3,400 kg • Payload: 14,600 kg Gedpfx Anoyutx Us Rjbl • Tyres: 265 / 70 R 19.5 • Tyre tread: 80 % • Total trailer length: 7,500 mm - Ready for operation! - General inspection / TÜV safety inspection: new! Errors and prior sale reserved! = Further information = GVW: 1 kg Please contact Joannis Arpantzanis or Kai Bühler for more information.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: M274150, cutting length (max.): 6,100 mm, total length: 9,500 mm, total width: 1,800 mm, rotational speed (max.): 2,800 rpm, overall weight: 3,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item on time either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Speed: 2,800 rpm Max. processing length: 6,100 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Power: 7 kW Current: 18 A Dimensions & Weight Dimensions (L x W x H): 9,500 x 1,800 x 1,800 mm Weight: 3,000 kg Gbedpfjym A U Asx An Rjl External reference: Groven - Lot 22

Condition: not inspected (used), Year of construction: 2007, operating hours: 43,558 h, functionality: unexamined, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle speed (max.): 5,000 rpm, spindle bore: 118 mm, controller model: SIEMENS SINUMERIK 840 D POWERLINE, distance between spindles: 900 mm, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates the buyer to collect the item within the specified time frames: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Maximum main spindle speed: 5,000 rpm Maximum sub spindle speed: 3,200 rpm Swing diameter: 270 mm Turning diameter: 120 mm Maximum bar diameter: 100/104 mm Spindle bore diameter: 118 mm Distance between spindles: 900 mm Travel X1-axis: 290 mm Travel Z1-axis: 650 mm Travel X2-axis: 180 mm Travel Z2-axis: 650 mm Travel Y1-axis: ±40 mm Travel Z3-axis: 670 mm Travel X3-axis: 175 mm Rapid traverse X/Z-axis: 30 m/min Rapid traverse Y-axis: 15 m/min Gedpfxsym A S Ij An Robl Number of tool turrets: 2 Number of tools per turret: 12 All tool positions are driven MACHINE DETAILS Control system: SIEMENS SINUMERIK 840 D POWERLINE Dimensions & Weight Dimensions (L x W x H): 5,500 x 2,500 x 2,500 mm Machine weight: 11,000 kg Operating hours: 88,040 h Spindle hours: 43,558 h EQUIPMENT Chip conveyor Foot switch Note: The machine has the following defects: - The B-axis is defective (located on turret 1) - The guideways and drives are worn in line with the machine’s age - The X2-axis (guide rails) runs slightly out of alignment in the range of 0.03 mm (re-measurement required) - Setting the reference values for the axes in the control system is not functioning - The hydraulic pump was replaced by a spare pump after failure and is now set up externally as a separate unit External reference: Bilstein - Lot 2

Condition: used, mileage: 883,648 km, power: 309 kW (420.12 HP), first registration: 07/2017, fuel type: diesel, empty load weight: 12,000 kg, maximum load weight: 14,000 kg, overall weight: 26,000 kg, axle configuration: 6x2, brakes: engine braking, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space volume: 45 m³, loading space length: 8,150 mm, loading space width: 2,470 mm, loading space height: 2,250 mm, Equipment: ABS, air conditioning, cabin, cooling unit, cruise control, differential lock, electronic stability program (ESP), onboard computer, parking heater, soot filter, tail-lift, traction control, trailer coupling, Yourtrucks Group The Yourtrucks Group maintains business relationships around the globe. Both purchasing and sales are conducted internationally, so our listings always show the net export price, as this is independent of the place of use. Yourtrucks GmbH compiles the content of this website with the utmost care and ensures it is updated regularly. This information is intended as non-binding general information and does not replace detailed, individual consultation when making a purchase decision. Only the provisions contained in the purchase contract are binding. Subject to changes, errors, typographical mistakes, and prior sale. Our general terms and conditions apply exclusively. Languages - We speak English - On parle français - ?? ????? ?? ????? - Mówimy po polsku - Hablamos español - Falamos português - Parliamo italiano Gbjdpfx Ansyugzio Rel

Condition: ready for operation (used), Year of construction: 2002, A flexible CNC filling system Rationator for liquid filling is available. Dosing principle: volumetric piston dosing, filling positions: 10, design: 2-phase filling, products: liquids/lotions/emulsions/cosmetic products/chemicals, filling range: 20ml-1000ml, total system length: approx. 7800mm, total system height: approx. 1650mm. Including conveyor belt and transfer station. Documentation available. An on-site inspection is possible. Expected to be available starting mid-June 2026. Gbsdpfeyugmrsx An Rjl

Condition: reconditioned (used), Year of construction: 2020, operating hours: 3,300 h, functionality: fully functional, total width: 2,500 mm, overall weight: 28,000 kg, power: 567.07 kW (771.00 HP), year of last overhaul: 2025, VZ 850 DK, Volvo Penta TAD16 L 770 HP, 3,300 operating hours - Conveyor belt as new, rollers replaced - Fine shredding shafts 12-9 as new - Counter-blade as new - Two hoppers Gbodpfx Anow S Iiio Rel - Long discharge conveyor - Magnetic belt - Track undercarriage guard - Cleanfix reversible fan

Condition: excellent (used), functionality: fully functional, Risco RS 750 Twin-Shaft Paddle Mixer with Mast Lifter Manufacturer: Risco S.p.A. Model: RS 750 Power supply: 400 V, 3 phase, 50 Hz Power: 7.8 kW Capacity: 750 l Weight: 1010 kg Dimensions: 2760 × 1170 × 1720 mm Loading system: Integrated Nieros mast lifter Gbedpfx Anoyt Sahs Rol The Risco RS 750 twin-shaft paddle mixer is a robust and reliable machine designed for industrial food production. It features two counter-rotating shafts with paddles, ensuring intensive yet gentle and even mixing of various masses—meat, vegetable, cheese, or confectionery. Thanks to its large 750-liter capacity, it is perfectly suited for medium and large processing plants. The unit is integrated with a professional Nieros (Heinrich Niederberger KG) mast lifter, enabling automatic loading of raw materials directly from standard 200-liter meat trolleys.

Condition: excellent (used), Risco mixer 450 litre. With forward and reserve and front end discharge. Brand new electrical panel. Godpfxjumcado An Rsbl

Condition: new, Year of construction: 2024, Model Type: Hammel, Arjes, Lindner Pronar VB 650 5-7-7 / 6-7-7 / 10-7-7 VB 750 6-7-7 / 5-7-7 / 10-7-7 VB 850 6-8-8 / 8-8-8 / 10-8-8 VB 950 6-8-8 / 10-8-8 / 10-10-10 Gbodpfx Ajr Nf Rlon Rel AT-TEC Recycling Solutions GmbH is a metal construction company specializing in the manufacture of shredding tools for shredder machines with an attached welding shop. Our experienced team is proud to offer high-quality and customized solutions. We focus on quality, innovation and customer satisfaction to ensure that our products fully meet our customers' requirements. Our customers come from various industries, including waste management, recycling companies and machine manufacturers. We maintain long-term partnerships and are happy to supply our products and services to companies looking for reliable and high-performance shredding solutions.

Condition: good (used), input voltage: 400 V, working width: 600 mm, total width: 3,480 mm, total length: 1,400 mm, total height: 2,640 mm, type of input current: three-phase, overall weight: 2,000 kg, König Eco Twin 800 Model: 800-DB800 K6-Schn6/B-DA Head machine for dough dividing and rounding Classic König Rex, 6-row With spreading conveyor, proofing cabinet Depositing device for 60x80 trays Stainless steel version Connection: 400V, 16A CEE plug Gbodpfx Anjx Ncc To Rol Dimensions: approx. 3480 x 1400 x 2640 mm (W x D x H) Used machine We have more bakery machines in stock!

Condition: used, Platform transport trailer, heavy-duty trailer Industrial trailer with 2-axle turntable steering Manufacturer: PLAN, type 11 Chassis no.: 31361-1 = year of construction 03/2015 Chassis no.: 31361-2 = year of construction 03/2015 Payload 20000 kg Unladen weight approx. 3760 kg Gross vehicle weight 23760 kg Platform height 850 mm Platform length 5000 mm (between the tarpaulin frame) Platform width: 2500 mm Overall length: 6100 mm (without drawbar) Overall width 2500 mm Tires Ø 559 x 300 mm (solid rubber tires 559/305-406.4) Gbedpfx Ajiiumrjn Rsl - 4 wheels with 2-axle turntable steering - track-running - Reversible drawbar, drawbar can be bolted to the front or rear - Drawbar with drawbar eye size 40 mm diameter - Small turning radius - Very stable outer frame made of U-beam Height 280 mm, width 95 mm - Very stable steel floor made of 10 mm checker plate - Tarpaulin body with steel base frame, can be loaded from the side Max. transport height 2300 mm under tarpaulin Length for transportation 610 cm (with drawbar folded up) Width for transportation 250 cm Height for transport 330 cm (with tarpaulin body) Weight per trailer approx. 3760 kg Good condition 2 pieces available Price per trailer

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Usable cutting length 5000 mm Blade diameter 550 mm Electronic head tilting Gbjdpfeyg Epvsx An Rol Internal/external inclination from 22°30′ to 135 ° Measuring probe

Condition: used, Year of construction: 2001, machine/vehicle number: 5358, - Manufacturer Elmag Superfici Gjdeumvk Aepfx An Robl - Type. TWIN SPRAY - Year of manufacture 2001 - Working width 1,300 mm - Working height 890 mm + - 20 mm - Operating side right - Price for overhauled machine - Gun drive in duo version - Dry extraction - Exhaust air output 8,000 m³/h - Belt transport system - Belt cleaning via roller cleaning system - With belt cleaning system - Belt cleaning, behind the machine, in the direction of travel, - With paint recovery - Gun control - Number of installed spray guns 4 pcs. - Spray guns type. Kremlin ATX - Airmix spray system - Supply air filter ceiling - Length 5,950 mm - Width 3,980 mm - Height 2,790 mm - Total connection 21 KW, 40 A - Volt, Hz 400 / 50 - Location, in stock _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: used, Comprehensively tested and refurbished, used Tatham 304 stainless steel twin shaft paddle mixer. Gbjdpfeykn Tlex An Rsl Manufacturer: Tatham Material: Stainless steel Capacity: 750 litre Mixing trough: 1000mm wide x 1500mm long Discharge Type: pneumatically operated twin bomb door discharge Type Of Blades: Twin shaft paddles Motor: 15 kw 415 volt 3/50 motor Also includes: Mild steel frame A video of this mixer is available below.

Condition: used, Comprehensively tested, used Tatham 304 stainless steel twin shaft paddle mixer. Manufacturer: Tatham Material: Stainless steel Capacity: 1,000 litres (approx) Mixing trough: 1700mm wide x 1500mm long x 1450mm deep Discharge Type: Pneumatically operated twin bomb door discharge Gsdpfx Anoykn S Uo Rjbl Motor: Twin shaft paddles chain driven by 15 kw 415 volt 3/50 motor Also includes: Unit is mounted on mild steel frame A video of this mixer is available below. ?v=iV2YFSJEqPc

Condition: good (used), Year of construction: 2007, functionality: fully functional, NAKAMURA WY250 SUPERMILL LATHE, YEAR 2007, OPERATIONAL, WITH DOUBLE Y-AXIS - FANUC 31iA2 CNC control - Main spindle bar capacity: 65mm, power: 18 kW, ASA 6, 4500 RPM - Sub-spindle bar capacity: 51mm, power: 11 kW, ASA 5, 5000 RPM - Live tool power: 7 kW with 40 Nm torque on both turrets (65mm throat, SUPERMILL) - Y-axis on both turrets (Y-stroke upper +50/-50 mm; Y-stroke lower +20/-50 mm) - Part catcher type G - Distance between spindle noses: 870 mm - Maximum turning diameter: 225 mm - Rapid traverse Z: 36 m/min, rapid traverse X: 18 m/min - Enlarged 500L coolant tank with chip conveyor - Turret coolant pumps: GRUNDFOSS CRK4-100/10, double stage, 3-12 bar with filters - Coolant wash over spindles - Air blow and coolant wash through sub-spindle - Auto shut-off - 3-color stack light - NT Nurse axes load monitor - IEMCA MASTER 880 bar feeder, year 2003 - Set of toolholders and collet holders as follows: Supplied with the machine: 4 external toolholders 4 dual opposed toolholders 6 boring bar holders 1 H32 cutoff blade holder Gedpfxeyrb Tnj An Robl 4 radial live toolholders (brand HEIMATEC) 4 axial live toolholders 1 Bellegrandi collet holder type MSCNT70-A6” for BA and BD series, size 70 (complete with mounting sleeves, main spindle side) 1 Bellegrandi collet holder type MSCTNR70-A5” for BA series, size 70 (complete with spring ejector, sub-spindle side) Complete Hand Jaw set for the part unloader

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Gbodom Rhfdjpfx An Rol

Condition: used, Year of construction: 2004, machine/vehicle number: M275603, functionality: fully functional, travel distance X-axis: 6,200 mm, Emmegi, Twin Electra Sun TU/6 CNC twin head mitre saw. Cutting lenght: 6200mm Gedpfxoxrg R Rs An Rsbl Blade 500mm