Used Twick & Lehrke Mirror Cabinet for sale (14,870)

Condition: used, Weiss   Type: WT11-1000/70/5   Weiss temperature chamber, air-cooled, with Weiss condenser cooler   Test chamber volume approx. 990 liters   Data for temperature tests:   Temperature range -70°C to +180°C   Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.5 K Spatial temperature deviation ± 0.5 to ± 2.0 K Temperature gradient (according to IEC 60068-3-5) 1 to 4 K   Temperature change rate (according to IEC 60068-3-5) Heating 5 K/min Cooling 5 K/min   Heat compensation max. 2750 W   Feedthrough installed as standard R1: NW 125 mm Gjdpfxozfy Rws Agrjui L1: NW 50 m   Dimensions:   Test chamber dimensions: Width 1100 mm x Depth 950 mm x Height 950 mm Housing dimensions: Width 1390 mm x Depth 1525 mm x Height 1995 mm   Maximum load (evenly distributed over the area) of the test chamber floor 150 kg per insert grid 50 kg Total load of the grid supports 100 kg   Data for operation:   Test chamber lighting: Halogen bulb 24V, 50W   Rated voltage 3/N / PE AC 400 V ± 10% 50 Hz Rated power 27.0 kW Rated current 42.02 A Heat dissipation water-cooled test cabinets max. heat dissipation to the environment 1.3 kW   Noise measurement: Sound pressure level approx. 64 dB(A)   Refrigerant: (converted to R-452a)   Weight: approx. 960 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data and information are subject to change!)   We will gladly answer any further questions you may have by telephone.

Condition: used, Bluhm Systems Type: e-SolarMark FL Marking laser, fiber laser e-SolarMark FL. No functional guarantee (untested). Introduction: The e-SolarMark FL10W and 30 W are laser systems of Class IV according to the IEC 825 and EN 60825 guidelines (standards for applications with end customers). It is designed to be integrated into a system or operated separately with a protective housing. After installation, the laser system must meet the requirements for a product with a specific protection class, according to the aforementioned guidelines. The e-SolarMark is a laser system for marking and engraving plastics, metals, and foils, both stationary and in motion. Technical Specifications e-SolarMark Description The e-SolarMark system consists of two main components: 1. The marking unit with laser head (scanning head) with focusing lens. 2. The control unit includes the power supply, electronic control system, and firmware for system function, with I/O slots inside. Godezgci Ejpfx Agreui The e-SolarMark includes a fixed galvo scan head, equipped with a lens for a square marking field with standard dimensions of 70 x 70 mm. Laser Specifications (Standard Version) Laser Type - Fiber Laser Laser Output Power - FL2 Model: 19W; typical Wavelength - 1062 nm typical Internal Modulation - 20 to 80 kHz Scanner Head Description: Scan Head - Two galvanometric mirror scanners with a hard, highly reflective dielectric coating. F-Theta Lens Types and Their Properties: Lens - Marking field 70x70 mm to 300 x 300 mm Focal distance - 192 mm Operating Environment Conditions: Relative humidity up to 80%, non-condensing Operating temperature 5 - 40°C Recommended operating temperature 15-25°C Dimensions W x H x D Laser unit 122 x 108 x 495 mm Control unit 520 x 380 x 215 mm Cable length, marking/control unit 3 m Weight, marking unit 5 kg Weight, control unit 15 kg Mains voltage 115/230 VAC. 50/60 Hz, single-phase. Power consumption, FL2 model 450W Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Technik Salt spray chamber / corrosion test cabinet Weiss Technik SaltEvent SC 1000 Corrosion test equipment / salt spray test chamber For sale is a used Weiss Technik SaltEvent SC 1000 salt spray chamber. The device is suitable for corrosion tests, salt spray tests, material testing, surface testing, quality assurance, as well as research and development. Technical data Manufacturer: Weiss Technik GmbH Type: SaltEvent SC 1000 Device type: Salt spray chamber / corrosion test equipment Year of manufacture: 2019 Test chamber size: Size 1000 liters Rated voltage: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.6 kW Rated current: 11.3 A Customer-side fuse: 16 A slow-blow Weight: approx. 370 kg Overall dimensions according to layout drawing: approx. 2910 × 900 × 960 mm Max. test chamber load: 150 kg Floor grid load: 150 kg Insertion rods: 8 kg per rod Shelf for machine part covers: 5 kg Temperature range salt spray test: Ambient temperature +5 K to +50 °C Temperature range condensation test: Ambient temperature +5 K to +42 °C Temperature compressed air humidifier: Ambient temperature +5 K to +70 °C Temperature stability over time: ±1 K Salt solution consumption during salt spray test: approx. 0.5 to 1.5 l/h Equipment S!MPAC control system WEBSeason / color control panel Touch operating panel Test chamber hood Storage tank Control cabinet Floor grid / test chamber grid Compressed air humidifier Hood locking Temperature monitoring Interface Documentation as shown in the pictures Connections / media supply Power connection: 230 V / 50 Hz Compressed air connection available Connection for demineralized water available Exhaust connection available Water drain / condensate drain available Application areas Salt spray test Corrosion test Condensation test Material testing Surface testing Coating testing Automotive Quality assurance Research and development Condition Used Optical condition as shown in the pictures. Scope of supply 1x Weiss Technik SaltEvent SC 1000 salt spray chamber Storage tank Accessories as shown in the pictures Documentation as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Inspection possible by appointment. Loading with a forklift is available. Shipping or freight forwarding is possible. Godozg Er Aepfx Agrjui Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, H. KÖHLER GmbH Condensation Water Test Device / Corrosion Test Cabinet H. KÖHLER HK 300 S Condensation Water Climate Test Device according to DIN 50 017 For sale is a used condensation water test device from the manufacturer H. Köhler GmbH. The device is suitable for corrosion tests, condensation water climate tests, material testing, coating testing, paint testing, and quality assurance. Technical Data Manufacturer: H. Köhler GmbH Type: HK 300 S Device Type: Condensation Water Test Device / Corrosion Test Cabinet Test Standard: DIN 50 017 Test Chamber Volume: approx. 300 liters Temperature Range: Room temperature to approx. +55 °C Humidity Range: Saturation operation possible Test Chamber Heater: 1,000 W Power Connection: 230 V / 50 Hz Connected Load: 1,000 W Compressed Air Consumption during Ventilation: approx. 3 Nm³/h Compressed Air Connection: 4.5 - 7.0 bar Deionized Water Connection: 2.5 - 4.0 bar Dimensions without Brine Tank: Width: approx. 1,200 mm Depth: approx. 600 mm Height: approx. 1,750 mm Weight: approx. 100 kg Control System HK PC102 Control LCD Display Programmable Test Cycles Condensation Water Climate according to DIN 50 017 Manual Operation / Test Operation Heater 1 / Heater 2 Alarm Display Equipment Stainless Steel Test Chamber Large Glass Door with Seal Test Chamber Thermometer Manometer Ventilation System Compressed Air Connection Deionized Water Connection Drain Connection Stainless Steel Base with Castors Accessories as shown in the pictures Application Areas Condensation Water Testing Corrosion Testing Coating Testing Paint Testing Material Testing Automotive Industry Quality Assurance Research and Development Condition Used Optical Condition as shown in the pictures No documentation available Scope of Delivery Gsdpfszhadcjx Agrsui H. Köhler HK 300 S Condensation Water Test Device Stainless Steel Base Accessories as shown in the pictures The other items visible in the pictures, which are not explicitly described, are not included in the scope of delivery. Shipping or freight shipping is possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has only been operated with argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser on-time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was in early 2026. Guodpfx Aezhlr Ejgrei Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during a running job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See image) SLM 280 machine Control cabinet Process chamber Internal control panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: new, HAHN-Automation Type: BDE11154003 Resistance welding system The system is designed for the automated resistance welding of the following components: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The system is manually loaded and unloaded by an operator. Any other use of the system than that described above is not intended and is therefore not permitted! System layout Welding unit Sledge unit Cleaning unit for welding electrode Base Linear unit Analysis unit DMC Dimensions (l x w) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Technical availability % ≥ 95 Operator 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of manufacture 2020 System components - Control cabinet - Protective enclosure - Linear unit Gsdpfxezd Rmgj Agreui Timing belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Gear ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 - Sledge unit Balluff BES M08EC-PSC15B-S49G - Evaluation unit DMC: Keyence SR-1000 - Welding unit Spindle axis horizontal Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNNN i=1 p=5mm Integrated reference switch: Hall PNP normally closed Welding tongs Crede PSZ-K Controller: ST-T13V2.0 Power supply: LT-L05-T13V13.0 (5,000A) Water cooler: DLK 1002-C Interface: ProfiNet Proportional control valve block PVB V1.0 Adapter box AB V3.0 for SZ and PSZ Extraction system TBH GmbH GL 265 Z Flow monitor Turck GmbH & Co. KG FCS-M18-AP8X Condition: unused, machine has never been used in production Condition: used Scope of supply: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, mileage: 28,874 km, power: 96 kW (130.52 HP), first registration: 05/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 7, total length: 6,204 mm, total width: 2,098 mm, total height: 2,349 mm, loading space length: 2,797 mm, loading space width: 2,143 mm, loading space height: 400 mm, Year of construction: 2020, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), soot filter, Errors and prior sales excepted! Internal number: 1039. LY79216 ----EQUIPMENT * Airbag (passenger side) * Trailer hitch, fixed - 13-pin including trailer stabilization (TSC - Trailer Sway Control) * Seat Package 29 - Driver's seat, 4-way electrically adjustable (forward/backward, backrest, seat cushion tilt, height) - Double passenger seat with storage compartment under individually foldable seat cushions - Headrests, height-adjustable - Tray integrated in the double passenger seat (foldable) - Front seat heating - Interior armrest for driver - Lumbar support, manual (driver's seat) - Airbag passenger side, front head/shoulder airbags and front side airbags - Seat upholstery: fabric * Transmission: 6-speed manual * Anti-lock braking system with electronic brake force distribution (EBD) * Axle load increase - front to 1850 kg * Airbag driver side * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, long arm - with integrated turn signals * On-board computer with fuel consumption and mileage information (e.g. remaining range) as well as outside temperature display and Ford ECOMode * Roof, flat * Roof, overhead storage compartment at the front * Roof marker lights * Double cab - 2nd row of seats with a 4-seat bench including 4 headrests, 3-point seat belts and two ISOFIX mounts - Storage compartment under the seats in the 2nd row - 2 rear doors with fixed windows - Complete headliner * Tachometer * Electronic safety and stability program (ESP) with traction control (TSC) - Hill start assist - Crosswind assist - Safety brake assist - Rollover protection - Emergency brake assist including emergency brake light - additionally with trailer stabilization only in conjunction with a towing device * Front electric windows - with quick-down/up function for the driver's side * Ford Easy Fuel - Convenient fuel filler and misfueling protection * Generator * Cruise control including leather steering wheel * Glove compartment with lockable lid * Interior lighting with delay function and reading lights at the front * Air conditioning at the front including dust and pollen filter * Fuel tank 70 liters * Paint: Solid color * Leather steering wheel * Steering column, adjustable in height and reach Gjdpfx Ags Akiqporeui * Fog lights * Particle filter: Diesel particulate filter * Flatbed: Standard flatbed (wide) - Front bulkhead extension, retaining straps for tailgate * Radio: Audio system 13 - Radio (FM/AM) - DAB/DAB+ - MyFord Dock - FordPass Connect - Four speakers, antenna - Audio remote control on the steering wheel - Bluetooth interface - USB port - Hands-free system * Headlights with static cornering lights * Headlight low beams with delayed switch-off * Power steering * Seat belts - Seat belt pretensioners and force limiters in the front - Warning system for driver's seat belt not fastened * Daytime running lights * Recirculation mode * Immobilizer * Heat-reflective glazing, slightly tinted * Central locking with remote control ... and more ----The vehicle has not been detailed! Nationwide delivery possible for an extra charge. Errors and prior sales excepted. We will gladly accept your vehicle as part payment. Financing/leasing also possible without a down payment! Do you have any further questions? We would be happy to advise you!

Condition: good (used), mileage: 117,660 km, power: 125 kW (169.95 HP), first registration: 03/2021, fuel type: diesel, tire size: 215/65R16, axle configuration: 4x2, wheelbase: 3,300 mm, fuel: diesel, color: black, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 5, total length: 5,450 mm, total width: 1,980 mm, total height: 1,980 mm, loading space length: 1,860 mm, loading space width: 1,720 mm, loading space height: 1,380 mm, Equipment: ABS, Apple CarPlay, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Bi-Xenon headlights - Tinted windows - None - Alloy wheels - Manual - Radio/cassette - Rearview camera - Lane keeping assist - Blind spot sensor - Partition = Notes = Configuration: 4x2, Payload: 874 kg, Unladen weight: 2126 kg, Gross vehicle weight: 3000 kg, Trailer load, unbraked: 750 kg, Tow hitch, Alloy wheels, Type of cabin: Double cab, Cruise control, Air conditioning, Number of airbags: 4, Parking assistance: Front and rear, Tinted windows, Electric windows, Electric mirrors, Partition, Radio/cassette, Carplay, GPS navigation, Color: Black, Metallic, Rearview camera, Lighting type: Bi-Xenon, Lane keeping assist, Seat heating, Bluetooth, Blind spot sensor, Engine power: 125 kW (168 hp), Number of cylinders: 4, Engine capacity: 1995 cc, Fuel: Diesel, Euro: 6, Drive technology: Timing belt, Transmission type: Manual, Gears: 6, Power steering, ABS, ASR, Starter battery, Body type: Extended, Side paneling, Roof rack: None, Side doors: 2, Side windows: 2, Rear closure: Double door, Central locking, Number of seats: 5, Seat arrangement: 1+1+3, Seat upholstery: Leather, Seat adjustment: Manual, Double cab TRAIL L2 2x side door, empty, 170 hp, Euro 6, tow hitch, navigation, camera!, Spare wheel, Tire type: All-season tires Guedpfx Agoz Azrkoroi = Additional Information = General Information Number of doors: 2 License plate: V-81-RLD Axle Configuration Tire size: 215/65R16 Brakes: Disc brakes Axle 1: Tire tread depth left: 8 mm; Tire tread depth right: 8 mm; Suspension: Coil spring Axle 2: Tire tread depth left: 6 mm; Tire tread depth right: 6 mm; Suspension: Leaf spring Weights Unladen weight: 2,126 kg Payload: 874 kg GVW: 3,000 kg Functional Loading area height: 52 cm Interior Upholstery: Leather Condition Technical condition: Good Optical condition: Good Damage: None Number of keys: 2 Financial Information Leasing price: €448 per month (delivery van, 72 months); Ask for more information and conditions.

Condition: used, Year of construction: 1996, Technical Specifications: • Working width: 1050 mm • Unwind diameter: 1250 mm • Rewind diameter: 800 mm • Shaftless unwinder • Shear cutting system • Pneumatic knife holders Gusdpfxsz Erq Hj Agrei • Fully automatic knife positioning • Turret rewinder with automatic roll removal • 3” friction shaft • Generator brake on unwinder • Unwind tension control via dancer roll system • Web edge control Equipment & Features: • Labeling device • Vacuum splicing table • Siemens S7 control system • Removal stand with push-off device • Automatic roll removal

Condition: used, mileage: 332,000 km, power: 335 kW (455.47 HP), first registration: 04/2019, fuel type: diesel, number of seats: 54, gearing type: automatic, emission class: euro6, color: green, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, Setra S 517 HD Excellent condition, original mileage * MB engine, 5 kW, Euro 6 * PowerShift automatic transmission * Retarder * ESP, ABS, ASR * ABA emergency braking assistant * Lane keeping assist * Attention Assist * 52+1+1 Luxline seats, custom design * Reclining seats with leather headrests * Tables, pockets, footrests, USB port for each seat * 2 refrigerators * Coffee machine in the WC * Tour guide cabinet * WC * Service sets with nozzle ventilation & reading lights * DVD video system with 2 electric flat-screen monitors * Navigation on screens * Radio, CD, MP3, USB, microphone * Roof edge night lighting * LED lighting on stairs 1 + 2 * ART distance control cruise control, limiter * Lowering system, kneeling function * Rear view camera (with nozzle) * Camera on door 2 * Xenon headlights * Fog lights * Heated windshield * Electric windshield blinds * Electrically adjustable and heated rearview mirrors * Onboard computer Guedpfx Ajz Ddlgegrei * Multi-function steering wheel * USB charging port * Bluetooth telephony * Driver's seat with air suspension, seat heating, ventilation, 3-way adjustable, rotating, armrests * Parking brake, hill holder * 2nd battery set for starting * Ski carrier loops * ALCOA aluminum rims Customers viewing this ad on Truckscout, please request additional images by email, as this portal is limited to 15 images! All information without guarantee Further information: also via WhatsApp Info in Polish: WhatsApp Your French contact: Georges Spengelin

Condition: used, mileage: 155,168 km, power: 120 kW (163.15 HP), fuel type: diesel, gearing type: automatic, emission class: euro6, Year of manufacture: 2019 Field of application: Freight transport Engine capacity: 2.143 cc General condition: average Technical condition: average Visual appearance: average Production country: DE Please contact Christian Theißen for more information Manufacturer: Mercedes Benz Model: Vito 4x4 Emergency doctor vehicle Year of build: 2019 Condition: Used Price on demand Data: First registration: 03.09.2019 Mileage: 155.168 KM Fuel type: Diesel Gear type: Automatik Drive type: All-Wheel Drive Engine power/displacement: 120 kW / 2.143 cm³ Colour: Color: White with vinyl decals Seats: 3 Environment badge: Green / Euro 6 Total permissible weight: 3.200 kg Equipment: Airbag, ABS, ESP, electric windows and side mirrors, automatic climate control, radio, power steering, daytime running lights, central locking. Information: According to DIN 75059: pressure chamber loudspeaker, Martin system, LED signaling system, accident data recorder, hands-free mobile phone system, doctor's seat, worktable, thermal compartment, cooling compartment, rear area cabinet. Additional Information: Side damage, defective water pump and valve cover. Gujdpfx As Ady E Nogrsi Location: 41468 Neuss immediately available

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 12,600 kg, maximum load weight: 13,400 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, cab, 1 comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, fog lights, leaf-air suspension, trailer coupling with air and light connections, aluminum tank, side aluminum fender, hydraulic cross-locking, sunroof, green environmental badge. Wheelbase: 3600 mm, Body: with used 20-ton roll-off system Hyva T20-53-S for containers up to 6.2m, 9-ton front axle, hydraulic auxiliary drive (HAD), rear axle bevel gear 233 planetary 13.4t, pipe rupture protection for braking system, electronic braking system with ABS and ASR, ABS can be deactivated, disc brakes with partial protection on front and rear axles, parking brake electronic, condensate monitoring for compressed air system, stabilizer front axle, massage function for driver's seat, waste heat recovery, construction site filter, PSM 2nd generation, ClassicSpace, MirrorCam, comfort locking system, light and rain sensor, off-road driving program, Mercedes PowerShift 3, Classic Cockpit, pre-equipment for toll collection, protective plate for tank, daytime running lights, high-performance engine brake, cyclone pre-filter for coarse dust, transmission oil cooling, ESP, lane keeping assist, attention assist, turning assist, Active Brake Assist 5, tire pressure control, auxiliary drive MB 131-2c pump, engine drive rear flange 100mm 650NM. New vehicle from stock, with registration date of June 23, 2022! The vehicle was previously registered exclusively as an exhibition vehicle to Daimler-Benz AG. Assembly of the roll-off system for an additional cost of EUR 7,000! On request, also available with a new roll-off system for EUR 12,000! Gjdpfxjvi Rybj Agrjui Delivery approximately 14 days after order! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, mileage: 242,466 km, power: 120 kW (163.15 HP), first registration: 05/2015, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: automatic, emission class: euro5, number of seats: 2, total length: 6,450 mm, total width: 2,080 mm, total height: 2,900 mm, Year of construction: 2015, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Special equipment: 1 DIN slot in the front under the headliner, airbag on the passenger side, hill start assist, exhaust pipe in front of the rear axle on the left, exterior mirrors without integrated turn signal, outside temperature display, battery 100 Ah, additional battery (reinforced), 1-pole battery disconnect switch, turn signals at the front on the side, roof control unit with reading light on driver/passenger side, entry lights, additional main key, folding cover for storage compartment, configurable special module, spare wheel with Super-Single tire (235/65 R16), spare wheel holder under the end of the frame including jack, interior rearview mirror, rear wall with window, mud flaps at the front, seats in the cab: passenger seat comfort, seats in the cab: driver's seat comfort, reinforced rear stabilizer, reinforced front stabilizer, fuel gauge for auxiliary heater, separating relay with additional battery, rear wall lining, thermal insulation of the driver's cab, heat-protective glazing (windshield with band filter at the top), auxiliary heater (air) electric Additional equipment: Adaptive brake light, airbag on the driver side, indicator for windshield washer fluid level, exterior mirrors electrically adjustable and heated, both sides, brake assistant, braking system with ABS+ASR, headliner in the cab, lockable glove compartment, body/superstructure: standard platform, fuel tank: main tank 75 liters, headlight range adjustment, truck approval, engine 2.1 liters - 120 kW CDI CAT, wheelbase 3665 mm, smoker's package, low emissions according to Euro 5 emission standard, safety belt system with warning system (driver side), seat cover/upholstery: fabric Lima, maintenance interval indicator Assyst, permissible total weight 5.00 t, dual tires on 2nd axle / rear axle * 1st owner * Rear axle with air suspension * Ambulance and rescue vehicle with box body * Superstructure from WAS * Adjustable floating table * Stretcher frame * Light carrying chair * Central locking for patient compartment * KONVEKTA air conditioning * 1 attendant seat * Refrigerator compartment * Warming cabinet * Sink * Medicine cabinets * Oxygen and suction system pre-installed * 12 + 230 Volt sockets * Skylight * External storage compartments * Rear wing doors with step * Side door with sliding window and step * All-round work lights * Partition with sliding window * Ambient lighting left, right and rear * 2x interior lighting, bright white and blue * Cab with 2 seats * 2x air conditioning at the front and rear * Automatic transmission * Telma retarder * Electric windows * electrically adjustable and heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Dual-tired rear axle * Extra pneumatically extendable step at the rear * Superstructure dimensions: L=3.650 x W=1.900 x H=1.980 mm * Wheelbase: 3.650 mm * Permissible total weight: 5,000 kg * Unladen weight: 4,415 kg Proper all-season tires from Conti, DOT 2024, at the front with approximately 6.0 mm and at the rear with approximately 4.0 mm tread depth Engine, automatic transmission, and rear axle are dry The engine runs smoothly, and the automatic transmission shifts cleanly Starter battery is new +++ Errors, changes and prior sale reserved Gujdpfx Aj Afrrqjgrsi

Condition: used, mileage: 335,804 km, power: 120 kW (163.15 HP), first registration: 02/2012, fuel type: diesel, empty load weight: 4,415 kg, maximum load weight: 645 kg, overall weight: 5,000 kg, axle configuration: 4x2, wheelbase: 3,650 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 3, loading space length: 3,650 mm, loading space width: 1,900 mm, loading space height: 1,980 mm, Equipment: ABS, air conditioning, airbag, cabin, central locking, onboard computer, power assisted steering, * German vehicle * Stollenwerk stretcher available for an extra charge * First owner * Rear axle air-suspended * Ambulance and rescue vehicle box body Gsdpfx Aew Ip Edogrsui * Body by Fahrtec Systeme * Adjustable floating stretcher table * Wheelchair mount * Central locking for patient compartment * KONVEKTA air conditioning * Stretcher wheelchair * 1 attendant seat * Refrigerated compartment * Warming cabinet * Sink * Medical cabinets * Preparation for oxygen and suction systems * 12V + 230V sockets * Roof hatch * External storage compartments * Rear wing doors with step * Side door with sliding window and step * Full perimeter work lights * Partition wall with sliding window * Intercom system * Driver’s cab with 2 seats * Air conditioning * Automatic transmission * Electric windows * Electrically adjustable, heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin rear wheels * Body dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * GVW: 5,000 kg * Unladen weight: 4,355 kg * For sales to commercial customers and for export (non-EU and EU), German commercial code applies. If a new TÜV inspection is required, we are happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish. Note: We offer and strongly recommend viewing and inspection of the goods, so that there are no misunderstandings regarding condition and suitability. Viewing and inspections are possible at any time by appointment and are expressly desired. All information is provided without guarantee. We accept no liability for errors or mistakes in this offer. The buyer is obliged to independently ensure the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors.

Condition: used, mileage: 60,048 km, power: 294 kW (399.73 HP), first registration: 05/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: ABS, * Special equipment: * Wiedemann & Reichhardt BASIC 1000 Type 11.5-360 Vario superstructure, suction and jetting vehicle, former municipal service vehicle. * 3.0 m³ water / 8.0 m³ sludge, piston in front position * Vessel tube, lid, and base made of stainless steel * Stainless steel baffle plate mounted on sludge tank * Combination unit with telescopic piston, suction hose reel, high-pressure hose reel mounted on a boom with electronic pressure and speed control and display readout * ARCON radio remote control * High-pressure pump: Uraca Type P3-45-60 (Plunger 60 mm, 346 l/min, 205 bar drive power 130 kW, drive speed 1500 rpm), 3,421 operating hours * Vacuum pump: Wiedemann KW 2000 (2000 m³/h) with 4,395 operating hours (liquid ring pump) * Liquid ring pump - power consumption 50 kW, speed 1300 rpm * Liquid ring pump coupled with a pre-charge pump for temperature-dependent water circulation * Suction and high-pressure boom (swivel reel with 2 high-pressure hose reels, which can be operated individually, simultaneously, or synchronously) * Centrally mounted boom for optimal working range on both sides * - hydraulically swivels approx. 180° * - hydraulically telescopes approx. 1,200 mm * Hydraulic cable winch mounted on boom, lifting capacity 250 kg * Suction hose 25 m DN 125 * High-pressure hose reel 200 m DN 25 * Small high-pressure hose reel 80 m DN 13 * Length counter for high-pressure hose * Manhole above tank DN 500 * Hydraulic tilting tank approx. 1 m for maintenance and repair work * Hydraulic oil tank with 80 L capacity * 5 sight glasses on tank lid * Water filling on both sides with level indicator * BEKA-MAX centralized lubrication system for superstructure only, pump type troni X1, runtime 1.5 min or 20 cycles, pause time 4h * Accessories (various nozzles, suction hose DN 125, hose guides, spare parts (cardan shaft, valves, hoses)) * Handwash basin in the right front equipment cabinet, 20 L capacity, with swivel tap and fill unit * Boxes right and left at the rear, approx. 50 L, for storage of return pulleys, nozzles, etc. * Work floodlight (spotlight for shaft illumination), mounted on the boom, with 15 m cable and cable reel * Various work spotlights mounted on both sides of the superstructure * Rotating beacon on the boom and driver’s cab * Holder for manhole hooks at the rear incl. 2 hooks * 2 spring-tension cable reels * Large equipment cabinets mounted to the right and left of the water tank (illuminated), approx. 50 cm deep, aluminum doors opening upwards, gas struts with top locking * Wardrobe positioned over the high-pressure pump with lighting, ventilation slots, and water drain at the bottom * Extendable vice with bracket to the right * Rockinger SK 5 towing coupling * Front axle load 9.5 t * Raised exhaust pipe on right * Exterior mirrors electrically adjustable and heated Guedpfx Ajxvfxhsgroi * Wide-angle mirror with electric maneuvering assistance * Kerb mirror on the right, adjustable and heated * Rear axle differential lock * Air horns on driver's cab roof (2) * Cab: with 2 rear wall windows, tinted * Cab: with air suspension * Flame start system * Toggle brake (EVBec controlled) * Middle seat * PTO NMV 221, i=0.98 n=1470 rpm * Cab socket 12V and 24V * Control module for external data exchange * Additional high/low beam and fog lamps with cornering light * Further equipment: * Reversing camera * Turning camera * Axle configuration: 6x2/4 * Steered trailing axle * Wheelbase 3,600 mm + 1,350 mm * Frame over...

Year of construction: 2023, condition: new, Control with motor for all old NC feeds. Substitute for Alba, Schleicher, Dreher, PA, Guedpfjcn Du Iox Agrsi Torque 6-90 Nm Complete price from 3,900.00 for Alba stepper motors from 5,900.00 for servo drives. To be installed by any home electrician.

Condition: used, mileage: 147,000 km, power: 140 kW (190.35 HP), first registration: 10/2017, fuel type: diesel, next inspection (TÜV): 01/2028, color: blue, gearing type: automatic, emission class: euro6, suspension: other, number of seats: 5, number of beds: 2, Equipment: air conditioning, all wheel drive, bathroom, central locking, parking heater, trailer coupling, Fixed bed, separate shower, roof rails and rear ladder, awning, refrigerator with freezer compartment, green environmental badge (4), leather, spare wheel, rear-view camera, DVD changer, black, TV, parking assist sensors rear, electric windows, multifunction steering wheel, radio/CD, outside temperature display, tinted glass, electric exterior mirrors, alloy wheels, Nissan Navara Double Cab 4x4 automatic, first registration: 26.10.2017, power: 140 kW, mileage: 147,000 km, displacement: 2,298 cm³, color: blue, TÜV valid until 01/2028, automatic, diesel, all-wheel drive, Euro 6, green environmental badge, automatic climate control, 5 seats, air suspension / Goldschmitt, upholstery leather black, radio sound system, electric sunroof, electric windows, electric adjustable exterior mirrors, tinted glass, multifunction steering wheel, adjustable seats, outside temperature display, roof rails, trailer hitch, running boards, Parktronic rear, central locking with remote control, fifth wheel coupling, underride guard, alloy wheels, living trailer Evergreen Eco-Lite: first registration: 01.12.2011, color: beige, TÜV: new, air conditioning, slide-out, heating, water heater, hob, gas stove, microwave, refrigerator, sink, armchair, seating area, TV, DVD player, bed 2 sleeping places, washbasin, shower, toilet, windows, rear-view camera, cabinets, blinds, fire extinguisher, smoke detector, awning, spare wheel, permissible total weight 3,500 kg. FOR US, THE CONDITION AND OVERALL IMPRESSION ARE DECISIVE; THE PRICE IS SECONDARY. Fully functional and rare trailer combination, which can also be sold separately. For further questions, Mr. Schlägel is available by telephone at the following number. //*EXCHANGE, TRADE-IN OF YOUR VEHICLE, OR LOAN, AS WELL AS FINANCING ARE POSSIBLE! All information without guarantee.* Further offers can be found on our homepage: The description and specified data do not constitute an assurance and are not binding. The purchase contract concluded at the car dealership when purchasing the vehicle is binding. Gjdpszhu T Sofx Agrjui

Condition: used, mileage: 324,966 km, power: 330 kW (448.67 HP), first registration: 03/2021, fuel type: diesel, empty load weight: 7,961 kg, maximum load weight: 10,039 kg, overall weight: 18,000 kg, tire size: 315/70R22.5, axle configuration: 4x2, wheelbase: 3,700 mm, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, spoiler, traction control, Vehicle location: Bovenden, StreamSpace, Active Brake Assist, Mercedes PowerShift 3, Lg. Haus, 1x comfort seat, 1x bunk, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, electric sunroof, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, roof spoiler, side spoiler, frame cladding, fog lights, work lights, leaf-air suspension, aluminum fuel tank, green environmental badge. Gjdpfx Agoz A Atgsreui Wheelbase: 3700 mm, Body: Saddle height approx. 1120mm, 8t front axle, rear axle bevel gear 440 hypoid 13.0t, electronic braking system with ABS and ASR, disc brakes on front and rear axles, electronic parking brake, condensate monitoring for compressed air system, front underrun protection (ECE), stabilizer front axle, smoker's package, lower comfort bunk, waste heat recovery, hot water auxiliary heater, electric lift-up roof, preparation for upper comfort bunk, StreamSpace, MirrorCam, comfort locking system, light and rain sensor, driving program economy/power, Mercedes PowerShift 3, navigation system, multimedia cockpit, preparation for toll collection, bi-xenon headlights, LED daytime running lights, headlight cleaning system, high-performance engine brake, chrome interior package, stability control assistant (ESP), lane keeping assist, distance control assist, attention assist, traffic sign assist, turning assist, Active Brake Assist 5, refrigerator. VIN: W1T96340310501454, ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, functionality: fully functional, machine/vehicle number: 34112, power: 315 kW (428.28 HP), first registration: 02/2025, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 6x2, fuel: diesel, color: white, driver cabin: day cab, emission class: euro6e, suspension: steel-air, loading space volume: 13.5 m³, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), power assisted steering, seat heater, traction control, truck registration, The mileage of the vehicles offered may vary, as some vehicles are currently in rental use! Further comparable vehicles are available upon request. Chassis design for ADR, ADR type class FL including EX/II, EX/III and AT, weight variant 27 t, engine OM470, regulated water pump, disc brakes, Active Brake Assist, ABS, ASR, ESP, lane keeping assist, attention assist, traffic sign assist, tire pressure monitoring, front guard assist, side radar, hill start assist, reinforced front axle 9 t 3-leaf, air-suspended rear axle, rear axle 13 t with differential lock, steerable and liftable 9 t trailing axle, daytime running lights, rain sensor, light sensor, trailer coupling Ringfeder (D40), tires: front axle 385/65R22.5, rear axles 315/80R22.5 M-cab ClassicSpace (width 2300 mm, tunnel 320 mm), driver's comfort air-suspended seat, co-driver's functional seat, multimedia cockpit, tinted windshield, sunroof, heated mirrors electrically adjustable, electric windows, comfort central locking system, multi-function steering wheel, multimedia radio touch with Bluetooth and navigation, digital tachograph VDO, trip computer, preparation for alcohol tester, 12/24 V sockets in the co-driver's footwell, circuit breaker, battery main switch, preparation for toll system, air conditioning, cruise control, speed limiter, waste heat recovery, compressed air connection in the cab, reversing camera, 2 rotating beacon lights on the cab roof, sun visor Gujdpoz Hmaxjfx Agrji ADR body with piston tank coding L4BH, total volume approx. 13.5 m³, usable volume sludge chamber approx. 11.5 m³, water chamber approx. 1.0 m³, tank wall thickness 6 mm, hydraulically opening full-size top lid with pneumatic hammer head locking (galvanized) and a suction connection at the bottom and top, suction connection for trailer operation at the rear left, 1x piston lock, piston with 2 piston seals and seal pressure regulation, tank content indicator - scale division in 500-liter increments, tank content indicator for the water chamber made of plexiglass tube on the right side, impact protection for the tank at the rear, vacuum pump CVS Vacustar 1300 (1200 m³/h) hydraulically driven, over-suction protection by 2 PVC balls, centrifugal separator with stainless steel brush insert and a stainless steel protective filter before the V-pump, high-pressure pump Speck NP 25/50-150 (approx. 50 L/min at approx. 120 bar) hydraulically driven, manually driven small reel with 60 m HD hose DN13 and spray gun, filling device for the water chamber consists of a Storz-C coupling, a hydraulically driven transport reel with 40 m (2x10 m and 1x20 m) suction hose DN 80 on the tank lid, 5x LED work lights, 2x on the right and 2x on the left on the tank and 1x at the rear, 1x removable and pivoting LED work light with 20 m cable, control cabinet made of stainless steel with louver on the right rear, outlet apron (ALU), hose box on the right and left (ALU), additional hose supports for surrounding hoses welded to the tank lid, lockable plastic toolbox, waste bin mounted at the rear (galvanized steel), ladder bracket and aluminum ladder, 2 fire extinguishers, 15 m grounding cable, rotating beacon, trailer hydraulics.

Condition: used, Year of construction: 2007, functionality: fully functional, power: 20 kW (27.19 HP), input voltage: 415 V, input current: 50 A, input frequency: 50 Hz, type of input current: three-phase, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 80 mm, Equipment: documentation/manual, We offer this used WEEKE OPTIMAT BHX 500 throughfeed machining center, year of construction 2007. The Homag Weeke Optimat BHX 500 is a compact CNC Horizontal drilling centre designed for high-precision processing of furniture panels, cabinet parts, and joinery components. Its horizontal machining design allows efficient processing with minimal floor space while maintaining high production speed and accuracy. _____ Key Features • Horizontal CNC drilling centre for efficient panel processing • Large processing capability • High-speed axis movement for fast production cycles • Integrated clamping system for precise panel positioning • Designed for drilling, routing, and grooving operations • Built by HOMAG / Weeke, a leading manufacturer of CNC woodworking machinery _____ Axis Speeds • X axis speed: up to 138 m/min • Y axis speed: up to 80 m/min • Z axis speed: up to 50 m/min Gjdpfxoyr Utns Agrjui • Pressure plate axis: 27 m/min _____ Workpiece Dimensions • Length: Min 300 max 2500mm • Width: Min 100 max 1000mm • Thickness: Min 4 max 80mm _____ Machine Dimensions • Length: approx. 6500 mm • Width: approx. 2300 mm • Height: approx. 2700 mm _____ Electrical Requirements • Operating voltage: 3 × 415 V ±5% • Frequency: 50 Hz • Total connected load: approx. 19.5 kW • Recommended fuse protection: 50 A _____ Pneumatic Requirements • Compressed air pressure: minimum 7 bar • Air consumption: approx. 2500 NL/min _____ Dust Extraction • Dust extraction connection: 2 × 280 mm ports • Airflow requirement: minimum 4450 m³/h • Vacuum pressure: approx. 3000 Pa _____ If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Number of floors . 0 Width of floors . mm Depth of floors . mm 770x50x1900 No locks or keys included Perhaps suitable for restoration The technical specifications are provided by the manufacturer or operator and are therefore non-binding for us. We reserve the right to sell the machines prior to purchase; our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Godpfx Agoyyczweroui If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2018, functionality: fully functional, overall weight: 91 kg, total length: 45 mm, total width: 60 mm, total height: 160 mm, type of input current: three-phase, 🔧 Device Description Professional cooling unit for control cabinets, designed for industrial applications. The unit provides stable operating conditions for electronics and automation systems, protecting them from overheating. The TopTherm series model is characterized by high cooling performance and reliability during continuous operation. Gujdsyw Ndgepfx Agroi ⚙️ Technical Data Power supply: 400 V / 50 Hz (3~) / 460 V / 60 Hz Cooling capacity (L35 L35): 400 V: approx. 3.95 kW 460 V: approx. 4.35 kW Sensible cooling capacity: up to 3.58 kW Power consumption: up to 2.0 kW Rated current: 4.2 A / 4.6 A Refrigerant: R134a (2995 g) Operating temperature range: 10°C – 55°C Degree of protection: IP54 (internal) / IP34 (external) Weight: approx. 91 kg 📦 Delivery Pallet shipping available Personal collection also possible We assist in organizing international transport

Condition: excellent (used), Year of construction: 1998, Double-sided Meinert grinding machine for band saw blades. Complete with dial gauges, fully functional. Guedpfx Ajzc Iacsgrsi

Condition: used, mileage: 210,100 km, power: 265 kW (360.30 HP), first registration: 03/2015, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,420 mm, loading space length: 4,500 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, * Mercedes Benz 18 t, including complete winter service equipment and detachable rear crane * Mercedes Benz AROCS 2036 AK 4x4 * Color: Deep orange * Wheelbase 3,900 mm * Engine OM470, R6, 10.7 L, 265 kW (360 hp) 1800 Nm * EURO VI * Displacement 10677 cm3 * Engine drive Rear, C * Hydraulic pump SEA A * Weight variant 22.0 t (9.0/13.0) * Winter service: increased front axle load 10.5 t * Transmission G 230-12/11.7-0.78 * Transfer case VG 2800-3W/1.45-1.04 * All-wheel drive Permanent * Mercedes Powershift 3 gearbox * Auxiliary drive for dump truck pump * Meiler three-way tipper with Bordmatic on the left * Municipal hydraulics by Schmidt * Mounting plate for snowplow size 5 * Turning assist system * Differential locks * Leaf-sprung suspension * All-round warning lights * Electric windows and mirrors * Air conditioning * Auxiliary heater * Tire front axle 385/65R22.5 * Tire rear axle 315/80R22.5 * Rear crane HIAB XS088BS-2HiDuo, year of manufacture 2014 * Crane with remote control X-SDrive * Crane weight without support 1070 kg * Lifting moment 71.0 - 86.0 kNm * Special high stand on the right side of the vehicle * Coupling system A * Küpper-Weisser single-chamber spreader, type IMSSN E29035HFA, year of manufacture 2015 * Container made of stainless steel * Frame Duplex * Control cabinet in stainless steel * Container volume 3.5 m3 * Hopper length 2900 mm * Screw conveyor * Spreader "OptiWet" * Spreading width 2-10 meters * Wet salt system - brine tank capacity 2240 l * Drive via the vehicle's municipal hydraulics * Lowering device RollTec 12 t * Control system "Vpad SN" Gujdjzfyc Tspfx Agrsi * Snowplow Schmidt TARRON MS 34.1 * including coupling devices * year of manufacture 2015 * Clearing width straight 3400 mm * Weight 1060 kg * Scraper bar, combination * Splash guard (rubber) * Adjustable snow guard (fabric) * Plow lighting * and more * Errors and prior sale excepted

Condition: used, mileage: 210,100 km, power: 265 kW (360.30 HP), first registration: 03/2015, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,420 mm, loading space length: 4,500 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, * Mercedes Benz 18 t including complete winter service equipment and detachable rear crane * Mercedes Benz AROCS 2036 AK 4x4 * Color: Deep Orange * Wheelbase 3,900 mm * Engine OM470, R6, 10.7 L, 265 kW (360 hp) 1800 Nm * EURO VI * Displacement 10677 cm3 * Engine drive Rear, C * Hydraulic pump SEA A * Weight variant 22.0 t (9.0/13.0) * Winter service Increased front axle load 10.5 t * Transmission G 230-12/11.7-0.78 * Transfer case VG 2800-3W/1.45-1.04 * All-wheel drive Permanent * Mercedes Powershift 3 transmission * Auxiliary drive for tipper pump * Meiler three-sided tipper with Bordmatic on the left * Municipal hydraulics by Schmidt * Mounting plate for snowplow size 5 * Turning assistant * Differential locks * leaf-sprung suspension * Rotating warning lights * electric windows and mirrors * Air conditioning * Auxiliary heater * Tire size front axle 385/65R22.5 * Tire size rear axle 315/80R22.5 * Rear crane HIAB XS088BS-2HiDuo, year of manufacture 2014 * Crane with remote control X-SDrive * Crane weight without support 1070 kg * Lifting moment 71.0 - 86.0 kNm * Special high-position on the right side of the vehicle Guedpfxozfyddj Agrsi * Mounting system A * Küpper-Weisser single-chamber spreading machine Type IMSSN E29035HFA, year of manufacture 2015 * Container made of stainless steel * Frame Duplex * Control cabinet in stainless steel * Container volume 3.5 m3 * Hopper length 2900 mm * Auger conveyor system * Spreading material distributor "OptiWet" * Spreading width 2-10 meters * Wet salt system - brine tanks capacity 2240 l * Drive via the vehicle's municipal hydraulics * Drop-off system RollTec 12 t * Control "Vpad SN" * Snowplow Schmidt TARRON MS 34.1 * including mounting devices * all from year of manufacture 2015 * Clearing width straight 3400 mm * Weight 1060 kg * Scraper blade combination * Splash guard (rubber) * Adjustable snow dust guard (fabric) * Plow lighting * and more * Subject to errors and prior sale