Used Turning Master for sale (9,892)

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 4.500 U/min The machine is untested and is being sold for spare parts. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Kdodpfx Ahjzz S R Ij Eot Prior sale is reserved.

Condition: good (used), Manufacturer: Jungenthal Year of manufacture: 1960 Type: DKE 1200 Machine number: WM 141 Faceplate diameter: 1,180 mm Table diameter: 1,400 mm Maximum turning height: 1,300 mm Speed range: 4.5 to 140 rpm Feed rate: 0.063 to 5.4 mm/rev Tool holder: Equipment: extended ram support, Kdsdpfx Ahsz A U Uve Eet stop mechanism, measuring device Condition: good, ready for operation Connection: 25 kW Weight: 13 t Dimensions: mm

Condition: good (used), Year of construction: 2002, functionality: fully functional, 1 x CNC turning center Traub TNA 300 Year of manufacture: 2002 (Spindle hours: 40746) Control: System TX 8 H with bar feeder LNS Hydrobar + chip conveyor Knoll Well-maintained machine with an extensive range of accessories, in excellent optical and technical condition. Accessories 33 x VDI 30 tool holders for turret (11 of which are driven) 1 x additional collet chuck with spindle reduction sleeve 10 x collet 181 E 10 x collet 171 E optional Kedpfewtlz Tox Ah Ejdt 1 x rotating steady rest in tailstock 1 x ATC optics Complete documentation The machine can be inspected while running.

Condition: used, Year of construction: 2005, functionality: fully functional, turning length: 1,500 mm, spindle speed (max.): 4,000 rpm, rotational speed (max.): 4,000 rpm, overall weight: 14,400 kg, Mazak Integrex 300 3 ST Control -Mazatrol 640 mt pro 2 Spindles 1500mm No CE 2005/05 in very good condition Turret lathe.....10 tool ATC.....40 tool Maximum Swing 33.5″ 850.9 mm Maximum Swing (Y-axis use) 26″ – 33.5″ 660.4 mm – 850.9 mm Maximum Swing over Cross Slide 33.5″ 850.9 mm Maximum Swing over Lower Turret 16.5″ 419.1 mm Located in Israel Kodpfx Ahox Rkvqe Eodt under power and ready for inspect . This CNC made in Japan and definitely needs a permit of MATI

Condition: excellent (used), functionality: fully functional, X = 1020 mm Y = 510 mm Z = 460 mm ATC 30 Table size: 1200 x 500 mm Machine dimensions: 3000 x 2800 x 2800 mm Machine weight: 7,300 kg Kdjdpfx Aoz Ap R Ujh Ejt

Condition: good (used), Year of construction: 1998, functionality: fully functional, Maximum turning diameter: 650mm, Maximum Machining length: 863mm Kdjdpfx Aoz Api Doh Ejt X345 Z900mm, live tooling, C-axis, spindelbore 130mm. MSC 501 (Fanuc)

Condition: used, Year of construction: 2011, bar material dia. 16 mm spindle passage 20 mm turning length 200 mm turning speeds 15000 U/min c-axis 0,001 ° gripping station 16 mm turning length 80 mm turning speeds 15000 U/min positive location each 0,001 ° Kdsdez Alaljpfx Ah Eot number of tools 23 total number of milling stations max. 12 control Mitsubishi MELDAS Number of axles 7 St. Number of working hours 25183 h total power requirement 3,7 kW weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,1 x 1,7m plus FMB swiss type machine Citizen K1&E-VIIP, built 2011, with FMB Minimag 20 Excellent conditions!From precision engineering company.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Swing over bed 755mm, swing over crosslide 740mm, max turning diam 366mm, max turning lenght 785mm.Live tooling, C-axis. X 260mm, Y 100mm, Z 795mm Y , Control MXS 850 III. Kdodpsz Arxujfx Ah Eet

Condition: used, Year of construction: 2022, Model: PUMA 2600SY II Year: 2022 Swing over bed: 780 (680) mm Swing over cross slide: 630 mm Recommended turning diameter: 255 mm Max. turning diameter: 376 mm Max. turning length: 760 mm Bar capacity: 76 mm Optional bar capacity: 81 mm Main spindle speed: 4,000 rpm Kjdpfezz Hkisx Ah Esdt Main spindle nose: ASA A2-8 Main spindle bore: 86 mm C-axis main spindle: 0.001° Sub-spindle speed: 6,000 rpm Sub-spindle nose: ASA A2-5 Sub-spindle bore: 62 mm C-axis sub-spindle: 0.001° Turret tool stations: 12 [24] External turning tools: 25 [20] mm Boring bar diameter: 40 [32] mm Turret indexing time: 0.15 s Driven tools: max. 5,000 rpm X-axis travel: 260 mm Z-axis travel: 830 mm Y-axis travel: 105 mm (±52.5 mm) Main spindle motor: 22 / 15 kW Sub-spindle motor: 15 / 11 kW Driven tools motor: 7.5 / 1.5 kW Coolant pump: 0.4 kW Machine height: 2,163 mm Machine length: 3,505 mm Machine width: 2,005 mm Machine weight: 6,550 kg Footprint: approx. 3400 x 1800 x 2600 mm

Condition: good (used), MAZAK Lathe Model: QTN 350 MY X 1500 Kedoz Apkbopfx Ah Eedt Year: 2008 Control Unit: MATRIX Maximum Turning Diameter (capacity): 720 Machinable Diameter / Standard Machinable Diameter (capacity): 420 Maximum Machinable Length*1 (capacity): 1500 mm Bar Capacity (capacity): 102 Centering Dimensions (main spindle): 315 Spindle Speed (main spindle): 3300 Spindle Nose (main spindle): ASA 11 Spindle Bore (main spindle): 112 Spindle Speed (powered tool spindle): 4000 Travel (tailstock): 1550 Taper (tailstock): CM 5 Main Spindle Motor (continuous / 40% duty) (motors): 37 Kw Coolant Tank (coolant): 400 l

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Video available at: Kdedpfx Ahozt Twye Est Base machine - Dynestic 7535-R Automatic 12.7 Dynestic table For classic nesting machining with wear plate Machining length: 3700 mm Working direction: from right to left Machine frame in welded construction with ground and hardened prism guides for the traversing carriage, aggregate head and consoles Traversing carriage in gantry design Rack and pinion drive, helical, in X and Y direction, Ball screw spindles Z-axis for precise positioning Technical data: Machining dimensions: Max. load on nesting table X = 3700 mm Y = 2200 mm Max. travel distances X = 5295 mm Y = 2935 mm Z = 565 mm Max. clearance height DYNESTIC table Z = 250 mm from the top of the table (without wear plate) Maximum programmable speed Vector speed: 128.0 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min 4-stage extraction hood with pneumatic height adjustment and viewing window Voltage 400 V, 50/60 Hz CONTROL: Dual-core processor Operating system: Windows XP 80 GB hard drive / 1 GB RAM RJ45 network connection 10/100 Base-T Fast Ethernet US keyboard and Microsoft IntelliEye mouse (optical) CD-ROM / CD-RW drive (CD burner) Remote maintenance Integrated network card for data transmission of control and program data. Data transmission via high-speed internet connection Requirement: High-speed internet connection to the machine. DYNESTIC table Solid, continuous machining table with grid spacing, continuous grooves in X and Y direction, Groove spacing: 50 mm with 25 meters of sealing cord for securing the wear plate 1 machining field with stop strips / stop Height: 30 mm, pneumatically lowerable 2 stop strips in Y direction and 1 stop in X direction on the right (when viewed from the front of the machine) Vacuum fields 1-circuit vacuum system Drilling unit 7881-R, 24 spindles Drive power 3.0 kW, incl. saw unit 18 vertical spindles individually selectable Arrangement in L-shape, 11+2 in X and 6 in Y direction 32 mm grid Max. drill diameter: 35 mm Total drill length: 70 mm from the mounting end (depending on plate thickness) Spindle extension stroke: 70 mm Rotation direction: alternating clockwise / counterclockwise n(max.) 1000 - 5710 min-1, infinitely variable Mount: M 10 thread - clearance fit 11 mm without tool, without mount 6 horizontal spindles 2 twin drill spindles in X direction (distance 32 mm between 1st and 2nd horizontal drill spindle) 1 twin drill spindle in Y direction Mount: M 10 thread, clearance fit 11 mm Total drill length max. 70 mm from the mounting end without tool, without mount Pressure booster, increases the standard pressure from 6 to 8 bar 5-axis milling unit 7844, Power: 10.0 kW (S6) cardanic, C-axis rotatable +/- 360°, A-axis rotatable +/- 180° n(max.) = 0 - 24000 min-1, infinitely variable, max. power at 12000 min-1 to 24000 min-1 Liquid cooling (cooling unit included) with HSK-F 63 tool holder with right-hand thread (for right-hand cutting tools) with collet chuck with HSK shank Ceramic ball bearings (hybrid bearings) Tool weight max. 6 kg (incl. holder) Tools:

Condition: good (used), Year of construction: 2007, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 Kdedpfx Ahez Ai Uge Eet - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged.

Condition: excellent (used), Year of construction: 2017, Sub-spindle, Y-axis, C-axis, B-axis FANUC 31i B5 NT-Smart control Turning diameter max 6400 mm Turning length -1150 mm Y-axis +/- 125 mm B-axis 1100 mm Main-spindle speeds 3'500 rpm Sub-spindle speeds 3'500 rpm C-axis positioning accuracy 0.001° Milling head B-axis -120 / +105 ° Spindlespeeds 12'000 rpm Ksdpszz I N Tjfx Ah Ejdt Tool changer 120 positions Barloader IRCO ILS-Muk-10016II Workpiece pick-up attachment Tool breakage control device 3D measuring tracer Misc. accessories MARCELS MASCHINEN CH

Year of construction: 2026, operating hours: 24 h, condition: new, Equipment: CE marking, "304 Cr N􀇕" quality􀇕types produced. Kdodpfozg Eb Rox Ah Eet It 􀇕s produced from 100 Liters to 1000 Liters. It 􀇕s used to homogenzer liquid products ALSO WE CAN PRODUCE WHICH TYPE AND LITER YOU WANT

Condition: good (used), Year of construction: 2001, Ref. -No.: 10551 Manufacturer: TRAUB Kdsdpfszx Nx Rsx Ah Ejt Type: TNC 42/65 Year of construction: 2001 Type of control: CNC-Steuerung Control: TRAUB TX Storage location: Halberstadt Country of origin: Germany Machine-No.: 93XXXXX Turning Speeds: 8000 RPM X stroke: 450 mm Turning Length: 450 mm Spindle Speeds: 4000 RPM Clamping Diameter: 42 / 65 mm Spindle Diameter In Front Bearing: 110 mm Tool Taper: 14 Max. Torque: 170 / 230 Nm Rapid Travel Speed X-Axis: 15 m / min Rapid Travel Speed Y-Axis: 6 m / min Rapid Travel Speed Z-Axis: 30 m / min Dimensions Of The Machine (Lxwxh): 4354 x 2076 x 1917 m Chisel slide cross section turning and milling support: 16 x16 ( 20 x20 ) mm Pressure: 70 bar hydraulic tank: 70 L. Total Power Requirement: 39 kVA Weight Of The Machine Ca.: 5,2 t Feed force X-axis at 100% duty cycle: 5000 N Feed path X-axis: 140 mm Z-axis feed path: 450 mm Y-axis feed path: 35 mm Ball screw Z-axis (Ø x pitch): 32 x 10 mm Ball screw X-axis (Ø x pitch): 32 x 5 mm Ball screw Y-axis (Ø x pitch): 25 x 5 mm Further information: - Revolver 1 Number of branches 10 - Revolver 2 Number of branches 14 - Hecowpkfie Htlx Tfefh - Powered tools Yes The machine can be viewed under power by arrangement.

Condition: used, Year of construction: 1996, functionality: fully functional, Parallel Lathe COLCHESTER MASTER VS 3250 Year of construction: 1996 Between points: 1250 mm Max diameter in front of bench: Ø 340 mm Maxi diameter over saddle Ø 160 mm Centre height: 170 mm Spindle diameter: Ø 42 mm Spindle speed: from 20 to 3250 RPM 3-jaws chuck Ø 200 mm Turret Mutifix B Kedoz Df S Uopfx Ah Eedt Metric Withworth threading 3-points steady Tailstock CM4 Scale WIZARD 150 PLUS Longitudinal + transversal auto feeds Spindle speed by electric drive Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2600 x 1400 x 1700 mm Weight: approx 2 T

Condition: used, Year of construction: 2018, Turning machine for door panels Manufacturer: Kraft Year of manufacture: 2018 Kdsdpfxez A S H As Ah Eot Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, * Mori Seiki NL 2500 SY. * Year 2009. * 5-axis machine. * Sub-spindle. * Y-axis. * C-axis. * 1.5-meter LNS bar feeder. * 12-station turret, all motorized. * Y-axis travel: +- 60 mm. * C-axis on both spindles. * Integrated main spindle motor: 18 kW. * Integrated sub-spindle motor: 15 kW. * Direct drive motor for powered tools: 5.5 kW. * Motor starting torque: 640 N/m. * Motors without belts or gears. * Main spindle size: A2-8. * Secondary spindle size: A2-6. * Bar capacity: 80 mm. * Main spindle chuck: Kitagawa B-210, 250 mm, with metric system. * Sub-spindle chuck: Kitagawa B-208, 210 mm, with metric system. * Prism guides on all axes. * Main spindle speed: 4,000 rpm. * Powered tool speed: 6,000 rpm. * Oil cooler for both spindles: Daikin. * Conversational automatic programming system: Mapps 4. Kedpfoz Alhcjx Ah Ejdt * Automatic force control and tool consumption monitor. * Rapid traverse speed: 30 m/min on X and Z axes. * Turret indexing time: 0.2 seconds. * Two arms for automatic tool measurement: Renishaw. * Communication ports: USB, PCMCIA card, and RS 232. * Installation interface for bar feeder. * Automatic parts collector. * Double pedal for independent opening and closing of the main and sub-spindle chucks. * Lateral chip extractor with integrated particulate filters. * Extensive range of static and motorized tool holders. * Electrical transformer. * Documentation, parts list, electrical diagrams, programming, and operating manual. * Weight: 5,800 kg. * Machine currently in operation. * Immediate delivery, unless sold immediately.

Year of construction: 2026, operating hours: 24 h, condition: new, Equipment: CE marking, It is made of "304 Cr N􀇕" quality material. It can be produced from 50 kg to 5000 kg. Areas of Use: It is used in powder chemical, spice, Kdodpfxszhryij Ah Ejt feed, pharmaceutical and cosmetic 􀇕industries.

Condition: good (used), Year of construction: 2007, functionality: fully functional, turning diameter: 545 mm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 570 mm, Equipment: chip conveyor, The MAZAK Integrex 100-IV is a compact and highly precise CNC turning and milling center designed for complete machining of complex workpieces in a single setup. Thanks to the combination of turning and milling functions, as well as the integrated B and Y axes, the machine is particularly suitable for demanding precision parts in the medical technology, mechanical engineering, and precision engineering industries. The machine was manufactured in 2007 and is equipped with the powerful MAZATROL Matrix control. This enables both dialog-oriented and ISO programming and offers modern functions for efficient and productive manufacturing. Key technical data: The travels are 410 mm in the X-axis, 140 mm in the Y-axis (±70 mm), and 570 mm in the Z-axis. The B-axis has a swivel range of 225°, enabling complex 5-axis machining. The C-axis of the main spindle operates with a high positioning accuracy of 0.001°. The maximum turning and swing diameter is 545 mm each. Ksdpjzpyvhefx Ah Esdt The main spindle reaches speeds of up to 6,000 rpm with a power of approximately 11 kW, which enables dynamic and precise turning operations. The integrated milling spindle operates with speeds of up to 12,000 rpm with a power of approximately 5.5 kW and is ideally suited for milling, drilling, and threading operations. The machine features a tool changer (available) with a maximum tool length of 210 mm and a KM tool holder, which ensures high rigidity and fast tool changes. Equipment: The equipment includes: • Chip conveyor • Tool measurement system "Tool Eye" With a machine weight of approximately 5,040 kg, the Integrex 100-IV impresses with its compact design, high precision, and flexibility – ideal for economical complete machining in modern production environments. You are in the best hands with us – professional, reliable, and with a passion for machines! Necoyir I Rs Eanhd Held PS CNC Service Germany GmbH & Co. KG All information is subject to change without notice.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, CNC Horizontal Lathe Mori Seiki NL2000Y/500 Year 2012 Controller : MAPPS III Max Swing Ø923mm Max over cross slide Ø755mm Max Turn Ø356mm Bar Capacity Ø65mm Travel X260mm / Z590mm Y +/-50mm Spindle Speed 5000rpm Turret 12 stations Max. milling speed 6,000rpm Ksdpfowvrfkjx Ah Ejdt Chip conveyor Stock Clearance at 39.000EUR ONLY

Condition: good (used), Year of construction: 2013, TX8i-s / WinFlexIPS Bar diameter up to Ø 32 mm Design allows for conversion between long and short turning Controlled axes: 9 Tool holder WRV on top, X/Y/Z dual drive Counter spindle with WRV on the bottom, separate drive Rear unit with drive Rated voltage 400 V, 3~, N, PE · 50 Hz Connection power 28 kVA, pre-fuse 63 A Recommended supply line: 16 mm² up to 30 m, otherwise 25 mm² Total drive power 46 kW · 73 A Compressed air requirement approx. 300 Nl/min Machine weight 6,850 kg Dimensions L × W × H 3,870 × 1,670 × 2,500 mm Safety standard EN ISO 23125, design type 3 small - Coolant lubrication with cutting oil — internal feed 30 bar, medium pressure 20 bar, high-pressure internal cooling 80–120 bar with its own pump - Coolant treatment system with strip filter (ELBARON) - Mist extraction and fume separator - Fire protection and extinguishing system — prerequisite for unmanned shifts with oil - Workpiece removal with linear unit (part gripper) - Incl. various clamping jaws - Linear measuring system in the X-axes - TRAUB tool monitoring and WinFlexIPS programming - Bar loader FMB turbo 3-36 for bars up to 3,200 mm, with synchronous and displacement device - Chip conveyor, hinged belt - Color: Dust gray RAL 7037 Kodpfx Ahezzahzo Eodt Machine operating time approx. 30,600 hours Machine price without the shown accessories (extensive accessories can be purchased separately) Errors and prior sale excepted. The machine can be inspected under power with short notice.

Condition: good (used), Year of construction: 2016, operating hours: 7,500 h, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 406 mm, spindle motor power: 18 W, spindle speed (max.): 5,000 rpm, spindle bore: 76 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 105 mm, travel distance Z-axis: 830 mm, Equipment: documentation/manual, Automatic measuring arm Chip conveyor Ksdpfx Ajzzap Esh Ejdt Parts collector Set of tool holders, including 2 motorized ones Presetting tools Chip conveyor Parts collector Set of tool holders, including 2 motorized ones

Year of construction: 2011, operating hours: 45,000 h, condition: good (used), functionality: fully functional, travel distance X-axis: 410 mm, travel distance Y-axis: 140 mm, travel distance Z-axis: 805 mm, spindle diameter: 150 mm, spindle bore: 51 mm, spindle speed (max.): 5,000 rpm, MAZAK INTEGREX 100 IV ST multitasking center Year 2011 Control unit: Matrix Maximum workable length: 753 mm Maximum workable diameter: 545 mm Kedpfx Aezz Rxwjh Ejdt Bar diameter: 51 mm Main spindle diameter: 200 mm, 2-jaw chuck Main spindle power and speed: 11 KW, 5000 rpm C-axis: 360° Counter-spindle diameter: 200 mm, 2-jaw chuck, self-centering Counter-spindle power and speed: 11 KW, 5000 rpm C-axis on counter-spindle: 555 X-axis travel: 410 Y-axis travel: 140 Z-axis travel: 805 B-axis travel: 225° Milling spindle power: 5.5 KW Milling spindle speed: 12,000 rpm Spindle mounting: CAPTO C6 Maximum tool storage capacity: 40 tools Lower turret: 9 positions, CAPTO High-pressure system through the spindle: 20 BAR Chip conveyor: belt type Automatic door Robot interface

Condition: used, Year of construction: 2013, Footprint: approx. 3900 x 2100 x 2280 mm Year: 2013 Serial No.: NL254130210 Max. turning diameter: 366 mm Kjdpfezz Hlgjx Ah Eodt Operating hours: 21,935 h Standard turning diameter: 271 mm Max. turning length: 705 mm Bar capacity: 80 mm Swing over bed: 920 mm Swing over cross slide: 742 mm X-axis travel: 260 mm Y-axis travel: ±50 mm Z-axis travel: 795 mm Main spindle speed: up to 4,000 rpm Spindle nose: JIS A2-8 Spindle bore: 91 mm Spindle bearing inner diameter: 140 mm Recommended chuck: 10" Turret: 12 stations Tool positions: 12 Driven tools: up to 6,000 rpm Drilling capacity, driven tools: Ø 26 mm Thread cutting: M20 Rapid traverse X/Z: 30,000 mm/min Rapid traverse Y: 10,000 mm/min Tailstock travel: 734 mm Tailstock quill: Ø 80 mm Main spindle motor: 18.5 / 18.5 / 15 kW Driven tools motor: 5.5 / 5.5 / 3.7 kW