Used Turning Device for sale (17,978)

Condition: used, Year of construction: 2003, BENZINGER, TNI B6 with: SIEMENS SINUMERIK control, turret, chip conveyor, fire extinguishing system, parts removal unit, IRCO bar magazine Nedpsywiuxsfx Ahvekw

Condition: used, Abdreharm RA 1, Abrichtbereich: aushoehlend 0,5 - 32 mm (104 - 162 mm) umfassend 0,5 - 22 mm Abdreharm RA 2, Abrichtbereich: aushoehlend 154 - 210 mm umfassend 10 - 65 mm Abdreharm RA 3, Abrichtbereich: aushoehlend 22 - 70 mm (66 - 120 mm) Nkjdpfxs Uryze Ahvsw

Condition: excellent (used), Tripod height adjustable Nsdpfjd Ey Abox Ahvjkw Tightening thread: 1/2 Weight: 5 kg incl. carrying strap

Year of construction: 1965, condition: used, machine/vehicle number: 2383, for tube-Ø: 250 - 530 mm for material thickness: 3 - 40 mm drive: by hand space requirement: 1000 x 800 x 1200 mm Weight: approx. 70 kg Nkjdpfxob Nv Stj Ahvow

Condition: used, for Morse taper: MK 4 Nksdpfxscftv Aj Ahvjw incl. test pin, storage box

Condition: used, Drilling jig on base plate with three-jaw chuck as well as 2-fold height-adjustable and horizontally movable holder for a drilling machine. Consisting of: Three-jaw chuck AROWA, 250 mm Ø, horizontally rotatable by 380° with scale as well as indexing and clamping. Basic frame for holding a drilling machine guided on 2 columns and adjustable in height by means of a spindle, Nkjdpfxjc U U Uds Ahvjw on it in horizontal plane around 120 mm with scale adjustable admission. On top of this, again on a round column, basic height adjustment on the column with clamping. Round guide with rack and lever for drill feed, stroke 100 mm. Space requirement over all: 600 x 400 x 850 mm high weight:

Year of construction: 1983, condition: used, machine/vehicle number: 80295, load bearing: 300 kg Nedj Rw Nqopfx Ahvjkw weight: 550 kg height of constuction: 1000 mm

Year of construction: 1988, condition: used, machine/vehicle number: 8855, lifting capacity: ca. 300 kg stroke: 1500 mm Nodpob Nwi Nsfx Ahvskw fork length: 4 Traggabeln, 600 mm weight: ca. 80 kg dimension: 1500 x 920 x 1340/2070 mm

Condition: used, for Morse taper: MK 3 Nksdpfxocftvwe Ahvow incl. test pin, storage box

Condition: used, for Morse taper: MK 2 Nedpfscftvxsx Ahvskw incl. test pin, storage box

Year of construction: 1978, condition: used, machine/vehicle number: 068242, Cup wheel Ø: 175 x 60 x 51 or 125 x 40 x 51 mm Nsdobx Elijpfx Ahvskw 2 grinding wheel speeds: 1450/2900 rpm table size: AT-F 205 x 345 mm space requirement: 1070 x 650 x 1180 mm Drive motor: 500 V (at 380 V 1/3 power loss), corresponding to 0.6 kW

Condition: new, Measuring area: 75 - 88 mm Nedod Efd Ijpfx Ahvokw

Condition: like new (used), Year of construction: 2022, operating hours: 850 h, functionality: fully functional, turning length: 610 mm, turning diameter over cross slide: 500 mm, turning diameter: 725 mm, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 610 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, feed length X-axis: 260 mm, feed length Y-axis: 80 mm, feed length Z-axis: 610 mm, torque: 250 Nm, bar passage: 65 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: As-new EMCO MAXXTURN 65-G2 SMY, year of manufacture 2022, equipped with Siemens Sinumerik ONE CNC control featuring ShopTurn! CNC turning center for complete machining of turned/milled parts. Key features include: - Integrated spindle motors, counter-spindle, water-cooled (preloaded roller guides) with Y-axis, operative on main and sub-spindle - Latest SINUMERIK ONE control with ShopTurn conversational programming Main Spindle: - Max. bar capacity: 65 mm - Max. torque: 250 Nm - Speed range: 0–5000 rpm Sub-Spindle: - Drive power: 22 kW - Max. torque: 130 Nm - Speed range: 0–7000 rpm Tool Turret: - 12-station VDI 30 radial turret with directional logic for up to 12 driven toolholders - Max. drive power: 6.7 kW - Max. torque: 25 Nm - Max. speed: 5000 rpm Nedpfx Ahjx E Dncsvekw Y-Axis: - Travel: ±40 mm Additional Equipment: - Hollow chuck cylinder incl. draw tube - C-axis for both spindles - Sinumerik ONE / OPERATE control - 22" multi-touch display - ShopTurn, 3D simulation, remnant material detection - USB interface - Electrical cabinet climate control - Coolant system incl. pump (3.5 bar) - Chuck flushing (extra pump 3.5 bar) - Parts ejector and flush through sub-spindle - Hydraulic unit - Interface for chip conveyor - Documentation and CE certificate - Control languages: German / English - Electronic handwheel - EMCO TOOL BREAKAGE AND WEAR MONITORING / SINUMERIK ONE - Alternating spindle speed - Sub-spindle as tailstock: This cycle allows use of the sub-spindle with mounted live center for workpiece support, permitting shaft machining even on machines without a conventional tailstock. Max. support force limited to 50% of maximum axis force. - EMCO PROFI-NET ROBOTIC INTERFACE: Connection interface for robot integration via HARTING connector. Signal exchange via Profinet. Safety signals: 2-channel/potential-free. - Digitalization package for Sinumerik: Condition monitoring - SIEMENS ONE INTERFACE for connection to MDE/BDE systems. Standard info includes: • Machine on - AUX ON • Automatic mode • Production mode - program active • Program running and override between 95–105% • Part count pulse (M30) • Programmable pulse (M300) - 3D machine data / MT65-G2: 3D model of the machine included Pneumatically actuated finished parts catcher for gentle unloading of finished components. Parts are transported to a collection box (standard) or onto a conveyor belt (optional). - Max. finished part length: 175 mm - Max. finished part diameter: 65 mm - Max. finished part weight: 4.5 kg INTERFACE SL1200 HT65-DT/TT + MT65-1000: For connecting the EMCO SL1200 bar feeder. Etc. The machine is immediately available!

Condition: used, Year of construction: 1978, functionality: fully functional, turning diameter over cross slide: 630 mm, turning diameter: 1,500 mm, turning diameter over bed slide: 1,000 mm, We offer a used face turning lathe PORĘBA TR-100C in good technical, fully working condition. Technical specifications: - turning diameter in bridge recess: 1500 mm - turning diameter over bed: 1000 mm Nkodpfsydpvzsx Ahvew - turning diameter over support: 630 mm - bed width: 600 mm - spindle bore diameter: 130 mm - range of rotational speeds (rpm): 5 - 500 - range of feeds (mm/rev): longitudinal: 0.045 – 6 transverse: 0.022 – 8 - engine power: 22/28 kW - overall dimensions: total length: 2700 mm width: 2130 mm height: 1400 mm total weight: 8000 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants

Condition: good (used), Schmedt PraKant Turning-in machine Njdpjywdm Aofx Ahvekw The PräKant is a turning-in machine designed to turn in and press down the edges during the production of book covers and other products. Weight: 150 kg Power supply: 400 V Flexible speed control.

Condition: used, Year of construction: 2012, turning diameter 320 mm turning height 750 mm Control Siemens max. turning speeds 4500 min/-1 drive capacity - main spindle 26,8 / 20,9 kW max. torque 256 / 200 Nm spindle bore 52 mm spindle head KK A6 (DIN 55026) chucking diameter max. 315 mm number of tool places 8 Pos. tool taper Capto C5 max. workpiece diameter 50 mm max. workpiece weight 0,5 kg x-axis 450 mm z-axis 300 mm rapid traverse x 45 / z 40 m/min total power requirement 68,3 kW weight of the machine ca. 11,0 t dimensions of the machine ca. L 3,7/4,2 x B 1,6 x H 3,0 m In our opinion, the machine is in very good condition condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of Nksdpexq Hkzsfx Ahvjw delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: used, Year of construction: 2013, feed x/z 20/40 m/min rapid traverse (x/z) 18.000 /30.000 mm/min number of tool places 12 Pos. tool taper VDI 50 In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Nkodpfxjx Ik Tdj Ahvsw Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2001, turning diameter 220 mm Control Fanuc 18i x-travel 390 mm z-travel 435 mm tool taper VDI 40 number of tool places 12 Pos. spindle tunring speed 4.500 U/min The machine is untested and is being sold for spare parts. Nksdpfjwth Szsx Ahvsw Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, turning length 1500 mm connected load 108 kVA total wight 19 t nominal voltage AV 400 V rated current 156 A In our opinion, the machine is in good used condition and can be inspected under power by appointment. There are 4 machines available. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Nkjdpfx Aex Ik Twshvsw Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 1998, Control Siemens 840 D swing diameter over slide rest 650 mm max. turning speeds 3800 min/-1 spindle diameter in front bearing 150 mm spindle bore 92 mm spindle head A8 DIN55026 number of tool places 2x 12 Pos. tool taper VDI 40 weight of the machine ca. 7,0 t In our opinion, the machines are in good used condition Condition and can be viewed under power by appointment. Technical features: - Nominal length: 1500 mm Accesories: - chip conveyor - Felsomat loading system - lathe chuck - milling body There are 2 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery Nodpsx I Simofx Ahvekw if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, TECHNICAL DETAILS: Nkjdpfxeyxqa Es Ahvow Manufacturer: DMG Gildemeister Model: NEF 400 Year of manufacture: 2009 Control system: Heidenhain Power supply: 400 V / 50 Hz Connected load: approx. 21 kVA Current: 31 A Control voltage: 230 V / 24 V Cable specification: L ≤ 5 m, 230 V – 150 W Made in Europe

Condition: used, Year of construction: 2009, operating hours: 42,497 h, functionality: fully functional, machine/vehicle number: L2203458, turning diameter: 510 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, bar diameter (max.): 32 mm, overall weight: 3,500 kg, Machine type: CNC lathe Manufacturer: Doosan Model: Lynx 220A Year of manufacture: 02/2009 Operating hours: 42,497h (power-on hours, as of 17.12.2025) Max. turning diameter: 510 mm X-axis travel: 175 mm Z-axis travel: 330 mm Spindle speed: 6,000 rpm Spindle power: 11 kW Tool changer: 12 positions Bar feeder: Ø8-32 mm Nksdpfeyxn D Iex Ahvjw Weight: 3,500 kg Transport, collection, and dismantling must be organized by the buyer.

Condition: good (used), Year of construction: 2006, operating hours: 14,119 h, functionality: fully functional, machine/vehicle number: 6682NL151EG0306J, turning diameter: 260 mm, spindle speed (max.): 6,000 rpm, total height: 2,000 mm, total length: 2,185 mm, total width: 2,460 mm, bar diameter (max.): 45 mm, overall weight: 5,300 kg, Machine type: CNC lathe Manufacturer: DMG Mori Model: NL1500/500 Year of manufacture: 2006 Operating hours: 14,119h (as of 17.12.2025) Control: MSX-850 BM Spindle speed: 6,000 rpm Machining diameter: with bar loader Ø16-45mm Tool stations: 12 plus tailstock Weight: 5,300kg Dimensions (W×D×H): 2460×2000×2185mm Transport, collection, and dismantling must be organized by the buyer. Njdpfx Ahjyxnu Hovjkw

Condition: as good as new (ex-display), Year of construction: 2024, Bath volume: 28 liters Nodpfx Aehma S Rehvskw Inner tub dimensions: 500 x 290 x 200 mm Device external dimensions: 530 x 325 x 400 mm Weight: 20 kg Ultrasonic frequency: 38 kHz Ultrasonic power eff./max .: 400/800 watts Heating capacity: 1,200 watts Total power consumption: 1,600 watts Sweep: yes

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 15000502019, SBZ 150 CNC for machining aluminium profiles. 6 m machining length. We have used it to mill LEDs into rafters, process rafter ends and machine window profiles. Elumatec has already been commissioned to carry out a service before the machine is sold. Includes computer, light barriers, cutters, saw blades, and much more. 6 m machining length. Dimensions and weight: length/width/height (mm) 8500 / 3200 / 3000, weight 6400 kg. Njdpexc Nqbjfx Ahvokw