Used Turning Device for sale (17,986)

Condition: used, Turret lathe, lathe with copying device, UMA Type F1 NK 60 Copying lathe for chucked workpieces Nodpfxsib D H Rj Ai Rscw Machine No. 28-0031, Year of manufacture 1971 Turning diameter max. 150 mm Swing diameter over bed 400 mm Turning length approx. 200 mm Spindle bore in the machine spindle approx. 42 mm Spindle speed 580 - 930 - 1480 - 2380 rpm, 4 steps Main motor power 5.5 kW Power connection 380 Volt, 50 Hz - Spindle flange for chuck mounting, short taper 55021, size 6, flange outer diameter Ø 180 mm - Spindle speed via 4 gear stages - Hydraulic clamping device with expanding mandrel, without spindle bore, clamping diameter Ø 15 mm - Right side with copying slide, copying device SAUTER Type KMCA 61, with hydraulic feed movement - Left side with cross slide with hydraulic feed movement - Coolant system installed under the machine bed - Hydraulic unit located behind the machine - Operating manual, electrical diagram, hydraulic diagram Space requirement for turret lathe with hydraulic unit L x W x H 2900 x 1900 x 1700 mm Space requirement for turret lathe L x W x H 2400 x 1900 x 1500 mm Space requirement for hydraulic unit L x W x H 1400 x 850 x 1700 mm Weight of turret lathe 2400 kg Weight of hydraulic unit 400 kg Total weight with pallet 3000 kg Good condition

Year of construction: 2017, condition: excellent (used), I sell the turning device AUTOMATICA DVPGP. Year 2017. One side feeding suitable for line. Element width up to 1400mm Nsdpjw Am Ndefx Ai Rjcw Total length 4500mm Available immediately. Ready for work, possible to test.

Year of construction: 1990, condition: excellent (used), I sell the turning device HOMAG TD31/25/13. Year 1990. One side feeding suitable for line. Element width 1250 + 1250mm Total length 6500mm Available immediately. Ready for work, possible to test. With full manuals. Nodpfjktfvfex Ai Rjcw

Condition: good (used), BILZ Size 3 Radius Lathe Turning Diameter 150 - 250 mm Ncjdsv Sag Njpfx Ai Rew Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: like new (used), Equipment to be placed after an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from cross sense (crosswise) to longitudinal sense (lenghtwise) Separate electric and command panel (unique with QZ0170A) Ncedpfx Aec Ux Tmoi Rsw 1st Table (cross) with motorized rollers (mm 2200 x 1850 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Total installed motor power Kw 4 Total lenght of the machine mm 4800 (ca.)

Condition: like new (used), Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° the panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Separate electric and command panel 1st Table (longitudinal) with motorized rollers (mm 1300 x 2900 ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers (mm 2200 x 2550 ca.) Njdpfxec Ux Tls Ai Rscw Total installed motor power Kw 4 Total lenght of the machine mm 5500

Condition: excellent (used), TURNING DEVICE FOR PANELS (LONGITUDINAL TO CROSS) Equipment to be placed between two Double End Tenoners (or two double-side Combination machines) in a line (straight position) or before an independent Double End Tenoner (or double-side Combination - Sizing & Edge Banding machine) To turn at 90° panels (workpieces) from longitudinal sense (lenghtwise) to cross sense (crosswise) Built-in electric and command panel Total length mm 6200 1st Table (longitudinal) with motorized rollers mm 1300 x 3200 (ca.) Motorized turning device, with double cone (1 top + 1 bottom) 2nd Table (cross) with motorized rollers mm 2500 x 3000 (ca.) Min dimensions of the panels mm 195 x 250 Nsdpfod Siydox Ai Rscw Max dimensions of the panels mm 1200 x 2500 Min/Max panels thickness mm 12 - 40 Total installed motor power Kw 3

Year of construction: 2020, condition: new, Height-adjustable rotating device for machining or assembly of turbine rotors, rollers, or shafts, designed for use under load. Load capacity: 20,000 kg Stroke: 400 mm Roller diameter: 350 mm Nodpjfw Afkjfx Ai Rscw Mountable component diameter: D180 mm - D900 mm Roller material: TEXMAT-500

Year of construction: 2020, condition: as good as new (ex-display), 1x Drive unit with chassis 1x Follow-up unit with chassis and height adjustment - Centric roller support adjustment with hand crank - Manual height adjustment, locking with locking pin - Adjustable height difference: 0-350 mm - Load capacity: 2,500 kg / unit - Component diameter: 200mm – 2,000mm - Running rollers: PUR wheels Njdpfxjfxgrdo Ai Rocw - Dimensions Length/Width: approx. 1,900mm x 460mm - Chassis track width: 1435mm - Rotation speed: 0 - 2,000 mm/min - Operation: Handheld remote control and foot switch

Year of construction: 2023, condition: as good as new (ex-display), Technical specifications: - Load capacity: 1500 kg - Tare weight: 300 kg - Insertable workpiece diameter: approx. 50 - 3000 mm - Roller diameter: 250 mm - Roller width: 50 mm - Rotational speed: approx. 100 - 2,000 mm/min - Dual-pedal foot switch Ncjdpfx Aied Iuqlj Rsw - Potentiometer for stepless speed control

Year of construction: 2022, condition: new, Technical data: - Load capacity: 10,000 kg - Tare weight: 850 kg - Workpiece diameter: 50 - 3500 mm - Roller diameter: 250 mm - Roller width: 160 mm - Rotation speed: approx. 100-2,000 mm/min - Dual-pedal foot switch Nedpsfxw H Aofx Ai Recw - Potentiometer for stepless speed control

Year of construction: 2023, condition: as good as new (ex-display), Technical specifications: Ncsdpfxod Iuqas Ai Row - Load capacity: 15,000 kg - Tare weight: 960 kg - Workpiece diameter: approx. 50 - 3200 mm - Roller diameter: 250 mm - Roller width: 240 mm - Rotational speed: approx. 100-2,000 mm/min - Dual-pedal foot switch - Potentiometer for stepless speed control

Year of construction: 2023, condition: new, Rotating device for handling components weighing up to 40,000 kg. Component diameter range: 500 mm to 6,000 mm. Nsdpfx Aieflmcxe Rjcw Rotation speed: 100 to 2,000 mm/min. Control via handheld remote control (optional: wireless).

Year of construction: 2009, condition: good (used), machine/vehicle number: 120P1109, OFFER 21407 Motorized tank/boiler turning device with rail-mounted chassis Technical data: - Total load capacity, driven + follower unit: 40,000 kg - Load capacity per tank/boiler turning device: 20,000 kg - Workpiece diameter: approx. 500 - 3,500 mm - Axle distance of the support rollers adjustable via trapezoidal screw spindle - Roller diameter: 500 mm - Roller width: 150 mm - Driven unit with drive on both sides - Continuously adjustable rotational speed - Handheld remote control for forward and reverse rotation - Drive: 400 V - Both units are mounted on rail-mounted chassis - Space requirement, driven unit: approx. W 3,800 x H 1,150 x D 1,350 mm Nedpfehcnhmsx Ai Rocw - Space requirement, follower unit: approx. W 3,600 x H 1,150 x D 1,350 mm - Weight, driven unit: approx. 2,500 kg - Weight, follower unit: approx. 1,800 kg

Year of construction: 2008, condition: used, machine/vehicle number: 820505-01+02, Lg. no. 24208 + 24209 2 pcs. Load turning devices Technical data : - Load capacity per ROTOMAX 25 t - max. torque 14000 Nm - Rotation speed 2.6 m/min Nedpfxetpbwho Ai Rjcw - Operation via manual remote control with intermediate cable - Length of intermediate cable approx. 8 m - Load turning belt with 160 mm belt width - Mounting pin 140 mm - Connection 400 V / 3.0 kW each - Space requirement per unit approx. W 2200 x H 1300 x D 900 mm - Weight per unit approx. 2100 kg

Year of construction: 1985, condition: good (used), machine/vehicle number: XXXX, Item No. 21392 Approximate technical data: - Total load capacity of driven and idler unit: 25,000 kg - Load capacity per container device: 12,500 kg - Workpiece diameter (approx.): 500 - 4,000 mm - Adjustable center distance of support rollers - Roller diameter: 400 mm - Roller width: 120 mm - Infinitely adjustable rotational speed Ncsdpfxek Eatds Ai Row - Handheld remote control for forward and reverse operation - Drive: 400 V - Space requirement of driven unit (approx.): W 3500 x H 850 x D 1000 mm - Space requirement with idler unit (approx.): W 2700 x H 850 x D 800 mm - Weight of driven unit (approx.): 1,300 kg - Weight with idler unit (approx.): 900 kg

Year of construction: 1998, condition: good (used), Offer 23126 Technical data: - Total payload driven + travelling unit 20000 kg. - payload per container device 10000 kg - workpiece diameter approx. 500 - 3500 mm - center distance of the articulated support arms man. adjustable - Roll diameter 4 x per support arm 250 mm each - roller width 4 x each support arm 80 mm - infinitely variable turning speed approx. 100 - 1500 mm/min - manual remote control for Re- and Li.-run - drive 400 V - space requirement with running unit approx. W 1700 x H 1100 x D 1000 mm - space requirement with running unit approx. W 1700 x H 1100 x D 700 mm - Weight attached unit approx. 1400 kg Njdpfxonwmt Ij Ai Rocw - Weight with running unit approx. 1000 kg

Condition: used, Hydraulic Copying Device SAUTER Type KMC 8001 Copy turning attachment, copying device for lathes The copying device comes from a lathe. Ncsdpfx Aijxxmf Ie Rew Connections for oil supply and oil return Copy stroke: approx. 140 mm Radial travel at 60° mounting: 120 mm Required operating pressure: approx. 25 bar Oil flow rate: max. 7 liters/min. Lathe drive power: max. approx. 15 kW Chip cross-section: max. 3.5 mm² Copying slide stroke: approx. 125 mm Distance from turning tool to tracer: 800 mm Net weight of copying device: 120 kg Good condition The matching hydraulic power unit and holders for the pattern parts can be found on our website under the search term 'Sauter'.

Condition: ready for operation (used), adjustable Ncsdeha Hhzepfx Ai Row

Condition: new, - Load capacity 5000 kg - Workpiece minimum Ø 250 mm - Workpiece maximum Ø 2300 mm - Roller diameter 250 mm - Wireless remote control - Digital speed display - Emergency stop - Documentation - 400V Nedpfx Aeqy Nr Hoi Rscw

Condition: new, workpiece weight (max.): 10,000 kg, – Capacity 10 tons – Minimum workpiece diameter 600 mm – Maximum workpiece diameter 3700 mm – Roller diameter 250 mm – Wireless remote control – Digital speed display Ncodpfx Aisv Dbz Eo Rjw – Emergency stop – Documentation – 400V

Condition: refurbished (used), Year of construction: 1990, functionality: unexamined, Pattern turning device with height adjustment and electric feed motors. Height adjustment is electric. The price is for the machine as is. Optionally, we can also offer a complete overhaul. Ncjdpex E Dbcsfx Ai Rsw

Condition: new, workpiece weight (max.): 1,000 kg, – Capacity 1000 kg – Workpiece minimum Ø 50 mm – Workpiece maximum Ø 800 mm – Roller diameter 250 mm – Continuously adjustable speed Nsdpfxov A Rrks Ai Recw – Foot pedal – Emergency stop – Documentation – 230V

Condition: refurbished (used), Index ER 25 Ncodefc Rmcspfx Ai Rjw Longitudinal turning attachment GT 2351.1300 3 units in stock.

Condition: used, Year of construction: 2013, mobile turning device with hydraulic height and lateral displacement load capacity 8 x 150 tons component diameter 5,000 up to 12,000 mm several turning devices must be installed to weld the Ncodst Run Iopfx Ai Rjw segments total load capacity 1,200 tons maximum steel support rollers *support rollers can be adjusted in three axes under load* - moving - roller axis:  + / - 50 mm - stroke - height adjustment: 0 bis 150 mm - thrust travel - cross adjustment: + / - 50 mm two height-adjustable drive units - type TR15 - M - year of construction 2010 load capacity 15,000 kg per roller roller diameter 559 mm - roller width 300 mm drive torque 2 x ca. M = 3,500 Nm connected load 3 KW per drive unit manual hydraulic roller feed rotational speed stepless 100 up to 2,000 mm/min by handheld remote control second drive unit can be operated by radio remote controle The entire system is designed for transportation in nine 20ft containers for worldwide use. total weight of the plant approx. 130 to