Used Turn for sale (8,504)

Condition: used, functionality: fully functional, turning diameter: 435 mm, spindle motor power: 11,000 W, spindle speed (min.): 35 rpm, spindle speed (max.): 6,000 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 360 mm, type of input current: three-phase, total height: 1,900 mm, total length: 2,500 mm, total width: 1,500 mm, quill stroke: 275 mm, quill diameter: 55 mm, overall weight: 3,600 kg, Equipment: rotational speed infinitely variable, Control system: Mazatrol T-32-3 Knedpezxy Ntsfx Ah Esb 12-tool turret, tailstock included.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 13,747 h, machine/vehicle number: 00820000561, CNC turning machine DMG Mori CTX beta 800 TC, Kodpfx Aez Dv Ndeh Eonb No. 00820000561, year of manufacture 2015, 24,796 operating hours, 13,747 load hours. including: - DMG Mori control system - Oil leak on the Ergoline pump housing - Chip conveyor - Machine coolant system - Lubricant filter system - Material loader ILS MUK 7012-III, Machine No. 74101508, year of manufacture 04/2016 The machine can be purchased via an online auction on our website. You can access it by clicking on the link in the advertisement. Auction ends: October 7, 2026, 6:00 PM.

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Kodpfx Aowym Nfoh Eenb Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: good (used), Year of construction: 2004, functionality: fully functional, CNC turning and milling center with 9 CNC axes, Okuma MacTurn 350 W, Year of manufacture 2004, OSP-E 100L, Additional magazine, Magazine with 80 tool positions, Main spindle with C-axis, Counter spindle with C-axis, Y-axis slide at the top / milling spindle, HSK 63 tool holder, Stepless B-axis as milling spindle, Knsdpfxez Dgude Ah Eob Distance between centers 1500 mm, Spindle bore 80 mm, Max. turning diameter 550 mm, Turning diameter 350 mm, Turret at the bottom with 12 tool positions and driven tools, Interlite compact filter system 900 l, Extraction system, Spindle operating time approximately 18,300 hours, Chip conveyor, Tool changer gripper arm completely renewed, High-pressure coolant, Coordinate measuring machine (CMM) measuring arm, Tool changer overhauled, Main spindle Kitagawa B - 210, Counter spindle Kitagawa B - 208.

Condition: used, Year of construction: 2008, operating hours: 46,815 h, functionality: fully functional, Disassembly, loading, and transport are the responsibility of the buyer. Knjdpfozzvw Sox Ah Eob Sale only within the EU.

Condition: used, MAZAK QUICK TURN NEXUS 250-II MSY Max. machining diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed, main spindle: 4,000 rpm Max. spindle speed, counter spindle: 6,000 rpm Max. bar diameter: 74 mm Machine is equipped with: - CNC control system Mazatrol Matrix - KITAGAWA 3-jaw chuck for main spindle, diameter 254 mm - KITAGAWA 3-jaw chuck for 2nd spindle, diameter 169 mm - Tool Eye Knedpfx Ahjz Dpdnj Eob - C-axis - Y-axis - Interface for bar loader magazine - automatic parts catcher - reinforced coolant pump - chip conveyor - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: good (used), Year of construction: 2023, functionality: fully functional, The machine is in good technical condition, testing can be arranged by prior agreement. Kodoz A T Hkepfx Ah Eonb

Condition: good (used), Year of construction: 2010, operating hours: 5,750 h, functionality: fully functional, turning length: 393 mm, turning diameter: 200 mm, spindle bore: 51 mm, MSX 853 cnc control 3-jaw chuck diameter 210mm 12-fold revolver C-axis driven tools tail stock coolant device chip conveyor Technische Daten: / technical details Drehdurchmesser / turning diameter 200 mm Kedpfxszd S S Ro Ah Esnb Drehlänge / turning lenght 393 mm X-Weg / X-travel 160 mm Z-Weg / Z-travel 450 mm max. Drehzahl Spindel / max. spindle speed 50-3000 UpM /rpm Eilgang X/Z / rapid feed X/Z 24/30 Anzahl der Revolverplätze / number of tool places 12 max. Stangendurchmesser / max. bar diameter 51 mm Antriebsleistung Spindel / drive capacity spindle 13,5 kW Gewicht ca. / weight ca. 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning diameter: 20 mm, spindle motor power: 5,500 W, spindle speed (max.): 8,000 rpm, spindle bore: 25 mm, travel distance X-axis: 50 mm, travel distance Y-axis: 350 mm, type of input current: three-phase, bar passage: 20 mm, overall weight: 4,200 kg, spindle diameter: 20 mm, Equipment: documentation/manual, rotational speed infinitely variable, Steuerung: Fanuc 310i Hauptspindel Drehzahl: 10.000 U/min Leistung: 5,5 kW Drehmoment: 14 Nm Stangendurchlass: max. 20 mm C1-Achse: 0,001 Verfahrweg Z1-Achse: 80 mm Gegenspindel Bjjgsn8yaky Drehzahl: 10.000 U/min Ksdpfjzz I Dksx Ah Eonb Leistung: 5,5 kW Drehmoment: 14 Nm C2-Achse: 0,001 Verfahrwege X2 / Z2-Achse: 240 / 300 mm Eilgang in X2 / Z2 Achse: 40 m/min Werkzeugträger I (X/Y) Technologie: Linearer Schlitten Innenbearbeitung: 6 Stationen Werkzeughalter: 20 mm Außenbearbeitung: 6 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzangenfutter, ESX 16 Verfahrwege in X/Y-Achse: 50/350 mm Eilgang in der X/Y-Achse: 40/30 m/min Stangenlader BOSS 332 E Werkzeugträger II (Y) Technologie: Linearer Schlitten Innenbearbeitung: 4 Stationen Werkzeugaufnahme: 20 mm Außenbearbeitung: 4 Stationen Werkzeughalter: 12 x 12 mm Angetriebene Werkzeugstationen: 5 Werkzeugantrieb: 3.450 / 6.000 U/min Werkzeugaufnahme: Spannzange, ESX 16 Verfahrweg in Y2-Achse: 120 mm Eilgang in der Y2-Achse: 40 m/min DETAILS ZUR MASCHINE Gewicht: 4200 kg Angeschlossene Last: 30 kVA Betriebsspannung: 400 V / 50 Hz AUSRÜSTUNG Spänemanagement: Späneförderer Kühlmittelmanagement: Kühlmittelpumpe Weitere Ausstattung: Signallamp

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Niles N 40 MC - 6000 Turning/Milling Center, year of manufacture 2019, Siemens SI 840 D SL control, X/Z 850/6820 mm, Y axis -200 / +400 mm, B axis 0.001°, B axis swivel range -105° / +95°, tool changer with 192 positions, C axis main spindle 0.001°, spindle speed up to 1750 rpm, 2 gear stages, max. workpiece weight between chuck and tailstock 6,000 kg, drive power 87 kW, HSK 100 interface, steady rest 70 - 425 mm, tailstock. Knodpfxoz Dgw Se Ah Esb

Condition: used, Year of construction: 2014, CNC lathe, 2 axes, Victor V-turn A20 (SV), Taiwan Year of manufacture: 2014 Control system: Fanuc OiTD with Manual Guide Chuck diameter: 210mm Spindle bore: 52mm Tool turret: 12 positions, VDI30 Turning length: 600mm Turning diameter: 390mm Maximum spindle speed: 5000 rpm Knodezhk Uxepfx Ah Esb Measuring probe: Renishaw Tailstock: MT4 Interface for bar feeder Chip conveyor Coolant tank with pumps Documentation

Condition: good (used), Year of construction: 2007, travel distance X-axis: 550 mm, travel distance Z-axis: 200 mm, - Speed range: [rpm]: 6,000 - Torque: [Nm]: 480 - Max. turning diameter over bed: 290 mm - Chuck diameter: 200 mm - Turret: 12-position, VDI 40, Sauter - Driven tools: 7.8 kW - Travel: - X-axis: 550 mm - Z-axis: 200 mm - Rapid traverse (X/Z) [m/min]: 30 / 20 - Feed (X/Z): [m/min.] 11 kN - Features: - Left-hand chip conveyor; 300 mm wide; ejection height 800 mm - Probe; direct linear measuring system; glass scales on all axes - Heidenhain circulating pickup tape - Machine with feed belt for part loading - Specification: - Overhauled in 2007 for approx. €50,000, complete headstock replaced. - Feed unit exchanged. Knjdpfx Ahez Dvz Hs Eob

Condition: good (used), Year of construction: 2016, 2016 Tornos DT 26 Swiss Type CNC Sliding Head Lathe With Fanuc Series 31i-Model B Control & Tornos SBF326-3.2M Bar Feeder Maximum Bar Ø25.4mm. Rapid Traverse 32m/min. Standard Workpiece Length With Guide Bush 225mm. Standard Workpiece Length Bushless 50mm. Main Spindle- Spindle Speed Range 0-10,000rpm (10.5kW Motor). Maximum Turning Tools 6 (Shank 12 x 12mm.). Number Of Frontal Tools (Main-Operation/Counter-Operation) 4/4. Max Front Drilling Ø12mm, Max Front Tapping M10 x 1.5.Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter Spindle-Maximum Bar Ø25.4mm. Main Spindle- Spindle Speed Range 0-15,000rpm (5kW Motor). Max Insertion Length Of Workpiece Into Counter Spindle 100mm. Max Standard Length Of Workpiece 120mm. Max Back Drilling Ø10mm, Max Back Tapping M6 x 1. Cross Drilling/Milling Tools 6 (ER20), Max Rotating Tool Speed 6,000rpm (1kW Motor), Max Front Drilling Rotating Tools Ø10/Ø10mm, Max Front Tapping Rotating Tools M5 x 0.8. Counter-Operation-Max Number Of Tool Positions 8, Max Rotating Tool Speed 7,200rpm (1kW Motor). S/No. 2581050017 (2016). Please note a loading charge of £200 + VAT to be added to buyer's invoice. Kjdpfxez Dg Evs Ah Ejnb With Coolant System, Hennig Chip Conveyor, Krauft Bauer Fire Suppressor Unit, SEI Mist Extraction Unit, Parts Catcher, Parts Conveyor, Signal Tower, Tool Kit, Cromar Swarf Bin & Manuals. Overall Dimensions L2,230 x W1,250 x H1,730mm. Weight 2,400kg.

Condition: excellent (used), Year of construction: 2015, operating hours: 5,300 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, type of input current: three-phase, total height: 1,800 mm, total length: 1,700 mm, total width: 1,250 mm, overall weight: 1,200 kg, In very good condition. Primarily used for manufacturing small production runs of plastic parts. Year of manufacture: 2015. Can be inspected during production up to calendar week 39/2026. Control system: Siemens 828 D Inspection possible at any time by appointment. Technical data: Turning diameter over the compound slide: 85 mm Turning diameter over the bed: 250 mm Maximum turning diameter: 85 mm Maximum turning length: 225 mm Maximum bar diameter: 25.5 mm Travel: Z-axis: 300 mm X-axis: 100 mm Tool turret with 12 tool stations, VDI 16 of which 6 are powered. Spindle speeds: 0 - 6000 rpm Main spindle: C-axis (spindle, resolution): 0.001° Machine weight: approx. 1200 kg Dimensions: Length: 1700 mm Width: 1250 mm Height: 1800 mm Accessories: Collet chuck, coolant cleaning gun, Parts catcher, LED indicator lamp, 4 wedge shoes, machine documentation. Knjdpfx Ahozxpt Io Eeb

Condition: used, WFL M 35 G MILLTURN is a CNC Turning‑Milling‑Drilling Center delivering high precision, accuracy and reliability. Capacities: distance between centres 2000 mm, max turning Ø 520 mm, spindle bore 77 mm; travels Z1 1500 mm/X1 550 mm, Z2 1355 mm/X2 230 mm, Y 250(-100/+150), B 220°. Specs: main/back spindles up to 4000 rpm, 29/33 kW (551/630 Nm), driven tools 6/13 kW, milling spindle 9000 rpm 15/20 kW (165 Nm); rapid traverses Z 40 m/min X 30/10 m/min; weight ~20000 kg; size 7900×5700×3250 mm. Accessories: lamp, coolant system, paper filtration, oil mist extractor, chip conveyor, automatic load/unload, Renishaw measurement. Enables tight tolerances; suited for automotive, aerospace, medical, watchmaking and machine‑tool sectors. Kodez Dv Dbepfx Ah Ejnb

Condition: used, Year of construction: 2011, functionality: fully functional, turning length: 810 mm, turning diameter: 320 mm, spindle speed (max.): 5,000 rpm, spindle bore: 73 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, bar diameter (max.): 65 mm, We offer this used Mori Seiki NZ2000 CNC turning and milling center, manufactured in 2011. Fully automated twin-spindle production cell with FANUC robot, PROMOT Automation, and TOP XF380 bar feeder. Year of manufacture: 2011 For sale is a MORI SEIKI NZ2000 T2 CNC turning machine as a complete, automated production cell with PROMOT Automation, FANUC industrial robot, and TOP Automazioni XF380 bar feeder. This system is particularly notable for its exceptional automation concept, of which there are only two in Europe. The combination of main spindle, counter-spindle, two turrets, bar feeder, and robot automation allows different machining and material flow processes to be automated within a single system. The main spindle is supplied with bar material via the TOP Automazioni XF380 bar feeder. The bar capacity of the machine is 65 mm. Finished parts can be ejected on this side via the existing parts ejector. Simultaneously, the FANUC industrial robot with PROMOT Automation handles the automated workpiece handling on the counter-spindle side. The workpieces are placed on or removed from a rotary table with multiple workpiece holders. This enables highly productive simultaneous machining on the main and counter-spindle. The system thus combines practically two automated machining processes within a single production cell. Equipment / Highlights  MORI SEIKI NZ2000 T2  Year of manufacture 2011  Main and counter-spindle  2 turrets  Simultaneous machining capabilities  Driven tools  TOP Automazioni XF380 bar feeder, year of manufacture 2011  Bar capacity MORI SEIKI NZ2000 T2: 65 mm  Automatic material feed via bar material  Parts ejector on the main spindle side  PROMOT Automation robot cell, year of manufacture 2011  FANUC industrial robot  Automatic loading and unloading on the counter-spindle side  Rotary table / workpiece storage with multiple workpiece holders  Integrated safety device and protective enclosure  Fully integrated and coordinated production cell Technical data  Max. turning diameter: approx. 320 mm  Max. turning length: approx. 810 mm  Bar capacity MORI SEIKI NZ2000 T2: 65 mm  Spindle bore: approx. 73 mm  Max. spindle speed main and counter-spindle: up to 5,000 rpm Kodpfxez A S Uyj Ah Eenb  2 tool turrets  Driven tools  C-axis on main and counter-spindle  Design without Y-axis  Simultaneous machining on main and counter-spindle  TOP Automazioni XF380 bar feeder, year of manufacture 03/2011  Bar capacity of the entire system: up to 65 mm round material, limited by the particularity of the system. In contrast to a conventional NZ2000 T2, this is not simply a CNC turning machine with a robot added later. The system was designed as a complete, automated manufacturing cell. Bar machining and robot handling can be combined within the same machine. While one side performs machining of bar material via the main spindle, the counter-spindle side can be automatically loaded and unloaded via the FANUC robot. This concept enables high machine utilization and is particularly suitable for series production and low-manned or automated production operations. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2003, operating hours: 17,977 h, functionality: fully functional, spindle speed (max.): 5,000 rpm, rotational speed (max.): 5,000 rpm, type of input current: three-phase, overall weight: 3,200 kg, Equipment: documentation/manual, We are offering this used GILDEMEISTER CTX 310 CNC turning and milling center, manufactured in 2003. The machine is currently in operation, fully functional, and can be inspected under power by arrangement. • Year of manufacture: 2003 • Control system: Siemens SINUMERIK 840D • Tool turret: 12-position VDI (for driven tools) • Spindle hours / processing time: 17,977 h • Hydraulic Hainbuch collet system including 36 collets • Without clamped tools or tool holders • Bar loader: LNS Quick Load Servo 3 (year of manufacture: 2003) Ksdpfez Dpkbjx Ah Ejnb • Chip conveyor (KNOLL) Serial number: 938311 Year of manufacture: 2003 Maximum spindle speed: 5000 rpm Weight: 3200 kg Connection power: 21 kVA Nominal maximum current: 30 A Current: 33 A Mains voltage: 400 V Mains frequency: 50 Hz Auxiliary voltage: 230 V Control voltage: 24 V If you have any questions or require further information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 100418005, travel distance X-axis: 1,500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 590 mm, feed length X-axis: 30,000 mm, feed length Y-axis: 30,000 mm, feed length Z-axis: 30,000 mm, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, mount diameter: 63 mm, total length: 9,485 mm, table length: 1,000 mm, total width: 4,609 mm, spindle speed (max.): 10,000 rpm, total height: 2,896 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, table load: 300 kg, position of the milling head: Horizontal / Swiveling, workpiece weight (max.): 300 kg, torque: 136 Nm, rotational speed (min.): 3,800 rpm, rotational speed (max.): 16,000 rpm, overall weight: 18,000 kg, working range: 1,000 mm, spindle nose: HSK-A63, tool weight: 6 g, grinding spindle motor power: 54,000 W, spindle motor power: 54,000 W, Equipment: rotational speed infinitely variable, Zero hours HSTM 1000HD 5-Axis Turn-Milling Center Was not used in production / just OEM commissioning and preserved. Basic machine HSTM 1000HD X, Y, Z axis with absolute linear scale A axis Swivel axis / B axis C axis Pressure control of head clamping CNC-control system SIEMENS 840D SL Remote diagnosis system via Ethernet Patrol light Control cabinet with air-condition Milling spindle 16’000 rpm, HSK-A63 Machining hour counter Tool handling system with double gripper Chill unit Hydraulic unit Machine housing with front door L shape Standard machine color scheme Coolant supply unit, low pressure, paper belt filter Flush Gun Chip conveyor Oil Mist exhaust system Documentation 1-fold in English + CD Machine option package Minimum quantity lubrication system High pressure cooling through spindle BEMA automatic adjustable coolant nozzles Tool measuring system BLUM Work piece measuring system BLUM 3D Probe Rotoclear window Handweel HT 2 Automatic operator doors CAD / CAM Software package “ Hamuel Single Blade” Ksdpfx Ajzvuu Seh Eonb CSE Siemens simulation Transportation and lifting tool set Commissioning tool set Geometrical measurement set Available in Bangkok, Thailand Worldwide shipping

Condition: used, Year of construction: 2011, 5 machines for sale only as a PACKAGE: 1. CNC turning center, 3 units Manufacturer: Traub Type: TNL 26 Year of manufacture: 2011 / 2008 / 2006 Operating hours: 64,154 / 75,849 / 81,823 Control: Mitsubishi TX 8i Equipment: - Main spindle - Counter spindle - Upper turret - driven + Y-axis - Lower turret - driven + Y-axis - Front tool holder - driven + Y-axis - Rear tool holder - Bar feeder 2x FMB / 1x Breuning The machines come from an ongoing production process. 2. CNC lathe, 2 units, one defective Manufacturer: EMCO Type: Turn 332 MC Year of manufacture: 2010 / 2008 Operating hours: unknown Control: Siemens Sinumerik 840D Equipment: - Main spindle - Counter spindle Ksdpfxozxhxvj Ah Esnb - Upper turret - Lower turret - Bar feeder TOP ETL 8-45 One machine comes from an ongoing production process; the other was previously used as a source of spare parts, and several components have been removed. The sale is without clamping devices and tools. Dismantling and loading can be organized by a specialist company for an additional charge.

Condition: good (used), Year of construction: 2011, turning length: 225 mm, turning diameter: 260 mm, travel distance X-axis: 170 mm, travel distance Z-axis: 335 mm, There are 2 more machines of the same design with identical equipment. Machine type: CNC lathe Manufacturer: Hwacheon Type: Cutex-160A MC Year of construction: 11/2011 Control: Fanuc 0i-TD Country of origin: Korea Delivery time: ex-stock >>Powered tools >>Turning and milling spindle >>Including tailstock >>Including bar loader magazine >>High productivity This CNC lathe is in good condition. Thanks to the basic and additional equipment, the machine has short indexing times for the turret and a high rapid traverse speed. The 3-axis machining and the additional turning and milling spindle allow workpieces to be processed in a versatile and efficient manner. The additional tailstock and the associated short bar loader magazine increase the productivity of the manufacturing process. An economically effective used machine for series production. Machine equipment Chip conveyor for side mounting and chip bucket Short bar loader magazine Interface for bar feeding device Workpiece collection tray (parts catcher) Turning and milling spindle Confirmation switch for chuck (open/close) Kodpfx Asz Azxwjh Eenb C-axis indexing Powered tools Tailstock, adjustable Linear guides Technical data Performance Swinging diameter over bed: 550 mm Max. turning diameter: 260 mm Max. turning length: 225 mm Chuck size: 6" Spindle Spindle nose (ASA): A2-5 Max. spindle speed: 6000 rpm Spindle bore Ø: 56 mm Max. bar diameter: 45 mm Spindle motor: 15/7.5 kW Turret Turret number of stations: 12 positions Turret indexing time (s/stations): 0.15 Feed rates Rapid traverse X-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Max. travel X-axis: 170 mm Max. travel Z-axis: 335 mm Feed motor X/Z: 3.0/1.8 kW Tailstock Arbor diameter: 60 mm Arbor stroke: 80 mm Taper bore/tailstock mounting: 4 MK Turning-milling spindle Spindle motor 3.7/2.2 kW Max. spindle speed: 5000 rpm Bar loader magazine Manufacturer: Fedek Machine Co. Type: DH-65 Min./max. bar length: 280/1200 mm Bar diameter: 5-65 mm Dimensions L x W x H: approx. 1620 x 620 (1200) x 1400 mm

Condition: used, Year of construction: 2012, turning diameter max. 356 mm turning length 1.255 mm control M 730 BM MAPPS IV greates pass round over bed 920 mm Swing dia. over traverse guideway 742 mm distance between spindles 1.511 mm turning speed range - main spindle 4.000 min/-1 power capacity - main spindel 18,5 / 15 kW spindle nose JIS A2-8 spindle bore 91 mm max. bar capacity 80 mm Spindle speed range subspindle 6.000 min/-1 power capacity - Sub spindle 11 / 7,5 kW spindle bore 43 mm x-travel 260 mm z-travel 1.345 mm Y - Axis +/-50 mm Kjdpfsz Dbqtex Ah Ejnb rapid traverse ( X / Y / Z ) 30 / 10 / 30 m/min number of toolpositions 12 pos. Schank height for square tool 25 mm Drill shank diameter 50 mm turret change time 0,27 sec. Spindle speed - driven tools max. 6.000 min -1 power capacity - driven tools 5,5 / 3,7 kW total power requirement 50 kVA weight of the machine ca. 7,8 t dimensions of the machine ca. 6,0 x 3,0 x 2,3 m CNC - Turning- and MillingCenter DMG MORI SEIKI - NLX 2500 SY / 1250 - Subspindle

Year of construction: 2021, operating hours: 900 h, condition: like new (used), functionality: fully functional, spindle diameter: 200 mm, spindle bore: 65 mm, spindle speed (max.): 4,000 rpm, Equipment: documentation/manual, Mazak Integrex J200s Year 2021 Control unit: Smooth G Distance between spindles: 1000 mm Maximum machinable diameter: 500 mm Maximum bar capacity: 65 mm X-axis travel: 450 mm Y-axis travel: 200 mm / +- 100 mm Z-axis travel: 960 mm Maximum spindle speed: 4000 rpm Knodpfezz Rt Uox Ah Ejb Spindle taper: A2/6 Spindle bore (main spindle): 76 mm Tool magazine capacity (automatic tool changer): 36 Capto Chip conveyor: Mayfran belt type

Condition: good (used), Year of construction: 2008, functionality: fully functional, Weiler DZ 40, Kjdpfxoz Dgvnj Ah Eonb Year of manufacture: 2008, Siemens 840 D control, Travel X/Z: 200/350 mm, Turning diameter: 180 mm, Max. swing diameter: 560 mm, Y-axis: +/-25 mm, Q-axis / programmable tailstock, Q-axis travel: 360 mm, Q-axis measuring system: rotary, Tailstock: MK 4, Main spindle max. bar capacity: 42 mm, Spindle bore: 52 mm, Rapid traverse X/Z/Q: 30/30/20 m/min, Turret: 16 stations – all driven, VDI 25, Shank diameter: 25 mm, Driven tools up to 4,500 rpm, Parts catcher, Accessories, Driven tool holders, Fixed holders,

Condition: good (used), Year of construction: 2008, XYZ Compact Turn 52 CNC lathe with barfeeder Year: 2008 Technical details: Bar Capacity 52mm Chuck Size 150mm (6") Control Siemens 810D Shopmill Distance Between Centres 280mm Maximum Cutting Diameter 220mm Maximum Cutting Length 280mm Rapid Feedrates 20m/minute Spindle Motor Power 20Hp Spindle Nose A2-5 Spindle Speed 5000rpm Swing diameter 400mm Swing Over Carriage 400mm Tailstock Quill Diameter 60mm Tailstock Quill Stroke 90mm Tailstock Taper MT4 Tool Size 20 x 20mm Kodpfx Aezg Intoh Eonb Tooling Configuration VDI 30 Turret Positions 12 X axis Travel 185mm Z axis Travel 325mm Machine Dimensions 2531 x 1778 x 1720mm Machine Weight 2590kg Accessories/options: - LNS servo barloader - Foot pedal for chuck operations - Parts catcher - Renishaw tool setter - Tailstock - VDI 30 tool holders - Swarf conveyor - Documentations Under power in our warehouse, possible to test it anytime!

Condition: good (used), Year of construction: 2012, CNC Turning / Millingcenter Machine type: DMG CTX beta 500 V6 Control: Siemens 840 D Knedpfx Ahsz Dkuhe Eeb Year: 2012 Working hours: 42.067 h Spindle running time: 20.209 h SPECIFICATIONS Max. turning length: 500 mm Turningdiameter: 410 mm Max. swing over bed: 700 mm Spindle bore: 87 mm Bar capacity: 77 mm C-Axis: 0,01° Main Spindle: ISM 76 Spindle speeds: 25 - 5.000 rpm Spindle power: 25 / 34 kW Torque: 280 Nm Subspindle: ISM 52 Travel Y-Axis: mm Amount of turrets: 1 Tool: VDI 40 Driven Tools: 12 revolution driven tools: 4.000 drive power driven tools : 11,3 kW Equipment Chip conveyor Short Bar Loader: LNS QLS 80 S2