Used Tube Press for sale (14,257)

Condition: used, Year of construction: 1961, Impact energy: 2040 Stroke: 660 mm Strokes per minute: 100/min Throat depth: 750 mm Distance between lower anvil and ram guide edge: 660 mm Drive power: 75.0 kW Hjdpezypd Njfx Agtefl Weight: 32 t Hammer weight: 16.5 t Anvil weight: 15.5 t Ram weight: 750 kg

Condition: used, Year of construction: 1997, Press force: 1000 t Stroke: 315 mm Strokes per minute: 21 - 42 /min Frame width: 1260 mm Side frame opening: 830 mm Shut height (max. stroke, top position, adjustment upwards): 1295 mm Table area: 1250 x 800 mm Ejector force in table: 63 t Ejector stroke in table: 75 mm Table height above floor: 670 mm Hfjdpfx Aezypx Tegtol

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, pressing force: 60 t, bale weight: 550 kg, Equipment: documentation/manual, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Hsdpfx Asz Aagaogtefl Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, pressing force: 48 t, bale length: 1,200 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 450 kg, Equipment: documentation/manual, HSM VK 4812 P Year of production: 2017 Fully automatic baler. The device has service and maintenance work by an authorized HSM service with a branch in Germany. Press after significant service work - details after direct contact. The baler comes complete with a ramp for ejection of finished bales and stands for binding wires. Pressing force: 480 kN Drive power: 18 kW Voltage / frequency: 400 V / 50 Hz Capacity at 50 kg/m³: 10.2 t/h Bale width x height x length: 1100 x 750 x 600 - 1200 mm Total length x width x height: 6661 x 3994 x 2583 Machine weight: 10.2 t Compressed material: foil, mixed paper, cardboard, die-cutter waste Bale tying: 4-fold with wire We also have other presses in stock. Transport costs depend on weight, volume and, above all, distance, the following information is important for inquiries: Delivery address (postal code and city name), but further details require telephone contact, so please inquire about transport costs and other delivery methods to contact us contact us by phone. Our contact details can be found in the seller's legal information. We sell and export worldwide, and thanks to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-Community invoices - without VAT. Hfodez Aaf Aopfx Agtel opening hours Mon-Fri: 8:00-16:00 Sat: closed

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, pressing force: 40 t, bale weight: 350 kg, HSM HL 4010 Re / Li horizontal baler. Equipped with a loading tipper for the basket. Manufactured in 2015. Very good condition - regularly serviced by an authorized service center. Ready for use. Available for binding with wire, string, or polypropylene tape. Semi-automatic baler system with a 40-ton pressure for economical volume reduction of residual (recyclable) materials in industry and retail: Cardboard Hfedpfx Agez Aaggotjl Tetra packs Films Foams PET bottles Insulation mats and other compressible materials. Press force: 400 kN Transport width: 1,767 m Transport height: 2,489 m Transport length: 5,573 m Weight: 4,500 kg Drive power: 7.5 kW Bale weight (depending on material): 300-350 kg Bale length x width x height: 750 x 1200 x 750

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 490000709, pressing force: 25 t, bale length: 1,200 mm, bale width: 780 mm, bale height: 700 mm, bale weight: 280 kg, total width: 1,700 mm, total height: 2,370 mm, total length: 1,248 mm, type of input current: three-phase, input voltage: 400 V, input current: 8 A, overall weight: 1,210 kg, power: 4 kW (5.44 HP), input frequency: 50 Hz, Turn your waste paper into money! With the HSM V-Press 825 plus pro, you can transform loose cardboard and waste paper into compact, marketable bales. We sell our own cardboard bales to a recycling company – take advantage of the potential of your recyclable materials! The purchase conditions depend on the material quality, quantity, and regional buyer. At the same time, you reduce cardboard piles, gain valuable storage space, and create order in your business. We are selling our vertical baling press, the HSM V-Press 825 plus pro, model year 2016, directly from our facility. Hedpfx Agez Ad Rpetefl Your advantages: • Fully functional • Maintained by a specialist company • DEKRA-certified • Suitable for cardboard, paper, and film • Inspection and demonstration possible while powered Ideal for production companies, warehouses, mail-order businesses, and commercial enterprises that want to collect their packaging waste in a space-saving manner and prepare it for recycling. Technical data: • Model: HSM V-Press 825 plus pro • Year of manufacture: 2016 • Pressing force: 250 kN (approx. 25 tons) • Bale dimensions: 1,200 × 780 × max. 700 mm (L × W × H) • Bale weight: up to 280 kg, depending on the material • Motor power: 4.0 kW • Power connection: 400 V three-phase / 50 Hz • Rated current: 8.5 A • Machine dimensions: 1,700 × 1,248 × 2,370 mm (W × D × H) • Machine weight: approx. 1,210 kg • Machine number: 6152.314 • Serial number: 490000709 See for yourself how the press works! Arrange an inspection appointment now in Simmozheim near Stuttgart. Send us your desired date via "Send Inquiry" or call us directly.

Condition: ready for operation (used), Year of construction: 1990, We offer this ready for use RAVNE DEE 630 transfer press, year of manufacture 1990. Hfjdpfx Agozbta Sjtel Manufacturer: RAVNE Model: DEE 630 Year of manufacture: 1990 Condition: ready for use Category ID: 1122 Type ID: 1489 Machine type: transfer press If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 1990, MILLER TP104 – 5-Colour Offset Printing Press – 1990 MILLER TP104 five-colour sheet-fed offset printing press, manufactured in 1990, with a maximum sheet size of 72 × 104 cm and approximately 80 million impressions. Hfsdpfx Ajzz Sbtjgtol TECHNICAL DETAILS • Manufacturer: MILLER • Model: TP104 • Year: 1990 • Printing colours: 5 • Maximum sheet size: 720 × 1,040 mm • Impression count: approximately 80 million EQUIPMENT • Unimatic C3 control system • Alcotron dampening system • IR infrared dryer • Weko Ionomatic powder spray system For further information, please send an enquiry through Machineseeker, including your company name, destination country .

Condition: good (used), functionality: fully functional, Heidelberg GTC Die-Cutting Press – 60 tons of die-cutting pressure Industrial classic | extremely robust | comprehensive accessory package For sale is an original Heidelberg GTC die-cutting press, one of the most powerful and robust die-cutting machines from Heidelberg. The year of manufacture and operating hours are not documented (typical for this machine generation), but the condition is functional, complete, and exceptionally well-equipped. Special feature: 60 tons of die-cutting pressure The GTC clearly distinguishes itself from other Heidelberg die-cutting presses (e.g., GT / T / smaller models): ➡ 60 tons of die-cutting pressure instead of the usual approximately 40 tons. This makes the machine ideally suited for: • Thick cardboard • Multi-layer materials • Demanding die-cutting and scoring jobs Hedpjyc Hnfjfx Agtofl • Tools with high surface pressure _____ Equipment & Scope of delivery • 3 die-cutting frames, including o 1 frame with a 340 mm milled recess (ideal for special tools / larger formats) • 2 die plates in different thicknesses • Comprehensive accessory and spare parts package (see pictures) • Spare parts list available – a significant advantage for operation and value retention • Original Heidelberg mechanics (robust, durable, easy to maintain) _____ Typical areas of application • Die-cutting and scoring • Format die-cutting • Small and medium-sized series • Packaging, cardboard, technical die-cut parts • Ideal for workshops, processors, and specialized companies Conclusion The Heidelberg GTC is not a museum piece, but a real production tool. With 60 tons of die-cutting pressure, several die-cutting frames, die plates, plenty of accessories, and a documented spare parts list, this machine offers an exceptional overall package for professional users.

Condition: used, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Equipment: foot remote control, For sale is a Mubea / Muhr und Bender BFL 350, a robust combined profile and bar steel shear with punching and notching capabilities. This machine is ideally suited for processing profiles and bar steel, as well as for punching and notching operations. Thanks to its combined design, various processing steps can be carried out with a single machine. Technical data: Manufacturer: Mubea / Muhr und Bender Type: BFL 350 Design: combined profile/bar steel shear with punching and notching capabilities Hodpfx Asz Ahanegtofl Punching force: 35 t Punching: up to Ø 28 mm with a sheet thickness of 10 mm Punching: up to Ø 23 mm with a sheet thickness of 12 mm Cutting capacities: Round steel: up to Ø 30 mm Flat steel: up to 28 mm Angle steel: up to 90 x 90 x 8 mm Flat steel: up to 150 x 13 mm Flat steel: up to 80 x 16 mm The Mubea / Muhr und Bender BFL 350 impresses with its versatile applications and its solid construction, designed for industrial use. Inspection is possible by prior arrangement. If you have any questions about the machine or would like further information, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, UNITECH designs and manufactures pneumohydraulic presses with nominal pressing forces from 10 to 600 kN, available in C-frame, two-column (two-post) and four-column (four-post) designs. The advertised price of EUR 4,000 net (excluding VAT) applies exclusively to the basic 10 kN model. All other press models and equipment configurations are quoted individually according to the required pressing force, frame design, stroke lengths, working area, control system and safety equipment. This listing covers the complete UNITECH range of new pneumohydraulic presses for industrial assembly and production applications. Each press can be configured to suit the workpiece, tooling and intended manufacturing process. TECHNICAL RANGE Nominal pressing forces: – 10, 30, 50, 100, 150, 200, 300, 400 and 600 kN Available frame designs: – C-frame – Two-column (two-post) – Four-column (four-post) Stroke ranges: – Power stroke: 5–20 mm – Total ram stroke: 50–250 mm The available combinations of pressing force, frame design and stroke lengths depend on the selected configuration and application. OPERATING PRINCIPLE The pneumohydraulic drive combines a fast pneumatic approach stroke with a short, hydraulically intensified power stroke. The full pressing force is generated only during the working phase of the cycle, providing an efficient solution for industrial pressing and assembly operations. TYPICAL APPLICATIONS Subject to the selected configuration, tooling and process-specific risk assessment, the presses can be used for: – Press-fitting and component assembly – Inserting bearings and bushings – Riveting and crimping – Punching and marking – Bending and forming – Straightening and calibration CUSTOM CONFIGURATION The following parameters and equipment can be adapted to the intended application: – Nominal pressing force – Frame design – Working area and installation dimensions – Power stroke and total ram stroke – Tool and workpiece mounting – Control system and operating sequence – Application-specific guards and safety equipment – Integration with production lines and auxiliary equipment DOCUMENTATION, ACCEPTANCE AND DELIVERY Complete machines are supplied with CE marking, an EU Declaration of Conformity and operating instructions in the agreed language: Polish, English or German. A Factory Acceptance Test (FAT) is carried out prior to dispatch. The presses are covered by a 12-month warranty. Standard delivery terms are FCA UNITECH, Zawiercie, Poland (Incoterms 2020). REQUEST FOR QUOTATION To receive a technical proposal and quotation, please provide: – Required pressing force – Preferred frame design – Workpiece and tooling dimensions – Required working height and working area – Required power stroke and total ram stroke – Description of the manufacturing process – Required control and safety equipment – Expected cycle time or production rate Hfodpfx Agjv Snixotjl The photographs show examples of UNITECH press configurations and may include optional equipment. The final technical specification, price and delivery time depend on the selected configuration.

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 25,379 h, For sale: professional CNC punching machine TRUMPF TruPunch 3000, manufactured in 2014. The machine is in very good technical and visual condition. The total operating time is only about 25,379 operating hours, which is a low number of operating hours for industrial TRUMPF machines of this age. The machine is sold together with punching tools. Currently, the unit is fully connected to the power supply, so before purchasing, you can inspect the machine in operation, check its functionality, and perform a test punching operation. Hfjdpfxezxxhno Agtel Key information: Manufacturer: TRUMPF Model: TruPunch 3000 Year of manufacture: 2014 Type: Electric CNC punching machine Working table: 3000 x 1500 mm Capacity: 18T Operating time: ~25,379 operating hours Comes with punching tools If you have any further questions, we will be happy to answer them.

Condition: used, Year of construction: 2018, Bale press and performance data Pressing force: 480 kN Hsdpfx Agszxzw Ejtjfl Specific pressing force: 58 N/cm² Drive power (motor): 11 kW Voltage/frequency: 400 V / 50 Hz (three-phase) Cycle time in idle mode: 35 seconds Theoretical throughput in idle mode: 32.81 m³/h [1] Bale and loading dimensions Maximum bale weight: up to 420–430 kg (depending on material and density) Bale dimensions (L x W x H): 1200 x 1100 x 750 mm Feed opening (W x L): 1020 x 900 mm (ideal for large boxes) Binding method: manual, with 4-fold wire wrapping Net weight of the machine: 5900 kg (5.9 tons)

Condition: good (used), Eccentric press, single-column press, stamping press, single-column eccentric press, eccentric press, single-column press -Manufacturer: Paul Müller, single-column eccentric press type ExP 45 -Pressure capacity: 45 tons -Clutch: Manual operation Hfsdpozytmbsfx Agtel -Stroke: adjustable 4 - 80 mm -Table size: 465 x 690 mm -Table cutout: 220 x 175 mm -Protrusion: 230 mm -Punch hole: Ø 38 mm -Insertion height 300 mm -Dimensions: 1300/950/H2050 mm -Weight: 2220 kg

Condition: used, Year of construction: 1975, Press force: 200 t Stroke: 600 mm Hfedpfjzynf Eox Agtsl Frame width: 1910 mm Side frame opening: 1000 mm Shut height (stroke up): 800 mm Table area: 1900 x 1150 mm Cushion force in table: 80 t Cushion stroke in table: 300 mm Cushion area in table: 1500 x 950 mm Table height above floor: 800 mm

Condition: used, Year of construction: 1987, Press force: 315 t Stroke: 750 mm Frame width: 1700 mm Side frame opening: 1100 mm Shut height (stroke up): 1250 mm Hfodjzynk Iopfx Agtsl Table area: 1600 x 1300 mm Cushion force in table: 125 t Cushion stroke in table: 350 mm Cushion area in table: 1000 x 900 mm Table height above floor: 750 mm

Condition: excellent (used), Offer consisting of: Heidelberg SM52-2P, year of manufacture 2004, complete N+P available. Hfsdsy Aictjpfx Agtol

Condition: good (used), For sale: PROMECAM PPH 25.12B press brake – manufactured in France. AMADA PROMECAM Hodjzyykaopfx Agtofl *Technical specifications:* - Force: 25 tons - Usable length: 1250 mm - One rear back gauge PROMECAM top and bottom tooling

Condition: used, Technical details: Total force (nominal): 800 to Clamping surface (left-right): x mm Clamping surface (front-back): x mm table surface area: 3200 X 2200 mm Total force (nominal): 2-3-4-5- Presse - 600 to. to table surface area: 2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface and drawing slide 2,150 mm, blank holder force 400 t, stroke 600 mm, adjustment 350 mm, clear height between table surface and blank holder 1,950 mm, max. drawing depth 300 mm, 14 strokes/min, Siemens control unit, operating panel by Baluff, table size 3,200 × 2,200 mm, system no. 0185100 Gripper automation, consisting of: 2 press-mounted blank grippers, system no. 0602400, 0602500, with turning table and turning device Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 6031AE4.084, order no. 7810011, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, control by Siemens Press automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0602600, 0602700 Double-column press, manufacturer Raskin, type 0631AE4 Year 1979, SN 0631AE4085, order no. 7810012, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control, system no. 0185300 Blank automation, consisting of: 2 grippers, system no. 0602800, 0602900, with tilting and turning table Double-column press, manufacturer Raskin, type 6031AE4 Year 1979, SN 06031AE4.086, order no. 7810013, single action, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control Hsdpfx Aozx Rmpogtjfl Blank automation, consisting of: 2 press-mounted blank grippers, turning and rotary table, system no. 0603000, 0603100 Double-column press, manufacturer Raskin, type 06031AE4 Year 1979, SN 6031AE4.087, order no. 7810014, pressing force approx. 600 t, 18 strokes/min, slide stroke 700 mm, distance between clamping plate and slide 1,200 mm, slide adjustment 400 mm, clear opening between columns 3,220 mm, slide surface 3,100 × 1,900 mm, tool clamping surface 3,260 × 1,900 mm, drawing cushion with 125 t force, stroke 0–200 mm, Siemens control 6-axis robot, manufacturer Ku

Condition: excellent (used), Year of construction: 2021, CATALOG NUMBER 7852 Technical specifications: - Pressing force: hydraulic - Briquette shape: round Hodpfozx Rxfsx Agtofl - Briquette diameter: 60 mm - Hopper diameter: 1000 mm - Throughput: approx. 110 kg/h - Automatic machine operation - Oil cooler - Motor: 7.5 kW - Dimensions (L/W/H): 1800x1100x1500 mm - Weight: 730 kg ADVANTAGES – Unpainted – Italian manufacture – Used briquetting machine – Original DTR + CE documentation – Perfect condition, year of manufacture 2021 Net price: 46,900 PLN Net price: 11,170 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (With significant exchange rate fluctuations, the price may change)

Year of construction: 2000, condition: used, - 5 printing units (letterpress) with magnetic cylinder - 1 flexographic coating unit - 6 UV drying units (air-cooled) - Rotary die-cutting unit with magnetic cylinder - GAP Master - BST POWER SCOPE 3000 "Pro Mark Edition" - video system for print quality control The scope of supply also includes a rotary die-cutting unit for the back of the web; this can be used in place of the flexographic coating unit. Hsdpfxozx N Hhj Agtsfl Maximum web width: 340 mm Minimum web width: 120 mm

Condition: as good as new (ex-display), Year of construction: 2024, pressing force: 80 t, Equipment: documentation/manual, YAWEI SKE1-80 Precision Servo Press – 800 kN / 80 t - Stock Machine - Demo Machine - Available immediately For sale is a YAWEI SKE1-80 precision servo press from the manufacturer Jiangsu Yawei Machine Tool. This servo press is suitable for precise punching, forming, and pressing operations and, thanks to the servo drive, allows for freely adjustable motion and pressing curves. Speed, position, and the pressing process can be controlled precisely. Manufacturer: YAWEI / Jiangsu Yawei Machine Tool Model: SKE1-80 Pressing force: 800 kN / approx. 80 t Ram stroke: 150 mm Idle stroke rate: max. 65 strokes/min Working stroke: 6 mm Max. tool installation height: 330 mm Ram adjustment: 80 mm Ram area: 560 × 460 mm Table area: 1,000 × 600 mm Table thickness: 120 mm Hfjdpfx Agszyamzstsl Operating pressure: 0.55 MPa Peak torque: 4,000 Nm Drive: Servo motor / Gear drive

Condition: good (used), Code: 0422 Brand: VILMAR Model: 970 Hydraulic press for moulds, frames, furniture elements, solid wood doors, plastic materials, composite materials and various Hjdszkqk Eepfx Agtsfl Work surface dimensions mm 970 x 500 Opening mm 350 N° 3 pistons Hydraulic power unit Overall dimensions mm 1630 x 1300 x 2100 h Machine to be reconditioned

Condition: used, Year of construction: 1957, Press force: 100 tons Stroke: 30 - 160 mm Strokes per minute: 40/min Throat depth: 315 mm Passage between frame walls: 400 mm Shut height (max. stroke, adjustment up): 460 mm Table area: 910 x 680 mm Table opening: 400 mm Hfjdszymurjpfx Agtjl Table height above floor: 800 mm Ram area: 630 x 400 mm

Condition: used, Second-hand machine Second-hand pneumatic frame press from Maweg MNo.: 7004124588 Pressing area: Length approx. 3500 mm / Height approx. 2450 mm 2 horizontal press cylinders 3 vertical press cylinders Hfedpezk Nwkofx Agtel Availability: by arrangement Location: Röllbach