Used Tube Heat Exchanger for sale (19,260)

Year of construction: 1999, condition: excellent (used), We are offering a Heizbosch natural gas boiler. Type LLR 4000 Boiler with a 4 MW output Year of manufacture: 1999 Flow temperature: max. 120 °C, Pressure: max. 6 bar Dsdpfx Asxxa Ivoc Nskh Water capacity 5720 l It has only been used very rarely, primarily for cleaning two adjacent biomass boilers.

Condition: new, Year of construction: 2023, functionality: fully functional, power: 150 kW (203.94 HP), fuel: diesel, Equipment: documentation/manual, type plate available, The REMKO "CLK 150" heat cannon is a powerful heater suitable for halls, workshops, marquees, materials, greenhouses, and more. Currently, 1 unit is in stock and available for immediate delivery. Condition: New / unused, from warehouse clearance / insolvency Scope of delivery: - 1 unit REMKO CLK 150 heater with oil burner - 1 unit Roth mobile heating oil tank, 1000 L - 1 unit room thermostat with connection cable Rated heat input: 150 kW Air flow: 9,710 m³/h Fuel: Heating oil EL Maximum fuel consumption: 14.8 L/h Exhaust gas loss: max. 9% Exhaust connection: Ø 200 mm Air outlet: Ø 500 mm Dkedpfx Aexli I Ssc Noh Connection voltage: 230 V Dimensions (H/W/D): Approx. 1350 x 920 x 2100 mm Weight: approx. 312 kg The machine can be inspected on site by appointment. All information is supplied without liability. Subject to prior sale.

Condition: good (used), Year of construction: 2001, Wood chip heating system, feed via underfeed auger. Used only during the transitional period. Heating capacity up to 550 kW. New parts such as grate, underfeed trough, and feed auger have been replaced. Dismantling is to be carried out by the buyer and the system must be removed by the end of April. Location: Passau area, but on the Austrian side. Dksdpfeyhl Dcox Ac Njh

Condition: excellent (used), Hall heating system with Rlco gas burner. An oil/diesel burner can also be used if needed. Chimney is included—everything is complete. For further questions, please contact us. Dkjdpod Tt Amjfx Ac Noh In very good condition.

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Dksdpfx Aoyhlrmoc Noh

Condition: used, The PRS 76 is a top-tier Tube End Finishing Machine designed specifically for efficient tube and profile processing. This advanced machine features a powerful 3 kW motor that allows it to grind various materials effortlessly. With its innovative rotating design, the PRS 76 enables you to grind at any angle between 30° and 90°, accommodating diameters from Ø 20 mm to Ø 76 mm. It comes equipped with two K36 grinding belts, measuring 100 x 2000 mm, ensuring you have everything needed for optimal performance. Ideal for both tubes and profiles, the PRS 76 stands out for its ease of use and versatility. Enhance your workshop's capabilities with this robust machine. You can request a quote today to learn more about the PRS 76 and discover how it fits into your tube end finishing requirements. Djdpfsuxdb Usx Ac Nokh

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: DELTA, pipe diameter (max.): 65 mm, pipe length (max.): 4,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 300 mm, bending radius (min.): 90 mm, mandrel length: 4,000 mm, number of axes: 3, total length: 5,500 mm, total width: 1,600 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 3 Axis 65 CNC Mandrel Tube Bending Machine TROX Liv Makina's most powerful machine is the CNC mandrel tube bending machine capable of bending tubes and profiles up to 65 mm with 3 axes, suitable for bending jobs in the Shipbuilding Industry, Thermal Power Plants, Park and Garden Furniture, Fitness Equipment, and Exhaust Industry sectors. What is difficult becomes easy thanks to hydraulic bending.  Ability to import drawings via Solidworks Program  Operation in fully automatic or manual modes via interactive PLC control system  Multiple language options  Ability to view products in 3D  3D pipe collision simulation  Automatic pipe length calculation  Conforms to CE norms Djdpfx Aoyhdzajc Njkh  Ability to see errors on display  Safety warning system  Easy usability thanks to Livmak Interface Technical Specifications – TROX 3Axis 65 CNC Max Bending Capacity: Ø65 mm x 2 mm Min/Max Mold Diameter: 90/250 mm Material Processing Length: 4000 mm Machine Dimensions: 5500x1750x1750 mm Total Motor Power: 15 Hp Machine Weight: 3 Tons

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: DELTA, pipe diameter (max.): 38 mm, pipe length (max.): 4,000 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, bending radius (min.): 60 mm, mandrel length: 4,000 mm, number of axes: 5, working height: 1,500 mm, overall weight: 2,700 kg, total length: 5,500 mm, total width: 1,800 mm, total height: 1,800 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 5 Axis 38 CNC Mandrel Tube Bending Machine PUMA Liv Makina’s 5-axis 38 mm CNC mandrel tube bending machine is one of the company’s models with the highest number of references spanning four continents in the Automotive, White Goods, and Defense Industry sectors. Its Solidworks-compatible interface ensures highly user-friendly operation. Our Industry 4.0-compliant machine provides daily reporting directly to your team. Thanks to its rolling die, the machine is capable of coiling tubes like a spring. Its feature of accommodating dies with 3 different radii makes even the most challenging bends much easier. The collision simulation software, which allows users to preview the bending process on-screen and helps save time, is provided free of charge on all of our CNC tube and profile bending machines.  Ability to import drawings to the machine via Solidworks  Fully automatic and manual operation modes with interactive PLC control system  Multiple language options  3D program visualization  3D pipe collision simulation visualization  Automatic tube length calculation  Compliant with CE standards  Error display on screen  Safety warning system  Easy operation via the Livmak interface Technical Specifications – PUMA 5 Axis 38 CNC Max Bending Capacity: Ø38 mm x 2 mm Min/Max Die Diameter: 60/250 mm Djdpfxoyhdx Ss Ac Nskh Material Processing Length: 4000 mm Machine Dimensions: 5500x1600x1600 mm Total Motor Power: 15 Hp Machine Weight: 2.5 tons

Condition: used, tank capacity: 1,000 l, 1000 liter electrically heated, insulated container made of V2A stainless steel Dksdpfxjyfwpxs Ac Noh

Condition: excellent (used), Year of construction: 2002, operating hours: 35,500 h, functionality: fully functional, overall weight: 2,000 kg, heating capacity: 150 kW (203.94 HP), temperature: 90 °C, screw conveyor length: 4 mm, Equipment: hot water, type plate available, HDG C 150 wood chip boiler – 150 kW with Pöllhuber articulated arm discharge for bunkers up to 6 m. Step grate for wood chips up to G 50 and shavings, automatic ash removal, dust separator and flue gas fan, control cabinet, operating manuals and spare parts lists. Emission values were always met; the latest measurement protocol is included. The plant will be dismantled in spring 2026. Dkedpfx Acsyhbxvs Njh

Condition: like new (used), Ilapak stainless flow wrapping and shrink tunnel line Carrera 2000 PC Dkjdsd I Ncgjpfx Ac Nsh stainless flow wrapper, dual jaw operation, jaw width 180mm, dual film reel holder with automatic film reel splicing, computer operated control system, overall length 3800mm, infeed length 2000mm with 200mm flighted pitch, this Ilapak has been running on Printed Film and has ability for PEC, the previous owner was using PE 30 micron but can also run on many other films. previously used for wrapping pizzas, also comes with Ilapak Indy fast feeder and Ling stainless shrink heat tunnel

Condition: used, Meurer heat shrink tunnel adjustable temp, variable speed, aperture 400mm x 350mm, mobile frame, Dedpfx Acsdmn Umo Njkh

Condition: excellent (used), Year of construction: 2007, For sale is a complete, containerized heating plant from the renowned manufacturer Kohlbach, with an output of 1500 kW. The system was in operation until recently and is in excellent technical condition. As part of a comprehensive overhaul, a completely new combustion chamber lining was installed and the air supply systems were renewed. Technical specifications: - Containerized design (no separate building required) - 19 m high chimney stack - Electrostatic precipitator for fine dust separation - Wood chip storage with moving floor - Hydraulic stoker for automatic fuel feeding - Complete piping system with central heating pumps Fuels: Suitable for various types of biomass such as bark, wood chips, and sawdust—ideal for efficient and environmentally friendly operation. Key benefits at a glance: Dsdsyha Szepfx Ac Nekh - Ready for immediate operation - No building permit required (mobile) - TÜV certificate (Germany, valid, issued 2023) - Very good overall condition Price on request – please contact us for more information or to arrange an on-site inspection.

Condition: good (used), functionality: fully functional, Year of construction: 2009, Used tube bending machine from Jutec Type: 5000 Capacity: up to approx. 40 mm Mandrel length: 4500 mm CNC controlled Automatic head Manually rotatable head with hydraulic clamping Incl. 3 sets of tools Dksdpfeyfmwxsx Ac Njh Year of manufacture: 2009 Very little used

Condition: used, The RGM 2 is a state-of-the-art Tube End Finishing Machine designed by KNUTH, renowned for its robust and precise engineering. With a rigid design and a small footprint, this machine is perfectly suited for shops that require efficiency without sacrificing performance. The RGM 2 features an impact chuck at the front and a clamping chuck at the rear, ensuring secure handling of various tube sizes. Additionally, it includes a tube cutter and an inside tube deburrer, which provide a complete solution for finishing operations. For mobility, the machine is equipped with a mobile base. When looking for a reliable Tube End Finishing Machine, the RGM 2 stands out with its advanced features. Don't hesitate to request a quote today to enhance your tube processing capabilities with this exceptional product from the renowned KNUTH brand. Dsdpfx Asp Atgbsc Njkh

Condition: excellent (used), functionality: fully functional, 1 x Wraps (UK) Ltd automatic sleeve sealer with heat tunnel and gravity conveyor. Auto Sleeve Sealer: Model - AI60-351. Serial number - 3281. Belt width - 450mm wide. Previously used for 280mm wide film. Overall dimensions - 1450mm long x 1350mm wide. Dkodpsyg Smbjfx Ac Noh Heat tunnel: Model - M60-35TR. Serial number - 3279. Belt dimensions - 1950mm long x 530mm wide. Aperture (tunnel) - 620mm wide x 405mm high. Overall dimensions - 2020mm long x 1250mm wide x 1780mm high. Outfeed gravity roller conveyor: Roller width - 490mm wide. Overall dimensions - 2020mm long x 505mm wide x 970mm high.

Condition: good (used), Year of construction: 2005, control type: CNC control, - Max. bending angle: +/- 180 + 10° - Tube feed length: 4100 mm - Round steel tube up to 30 x 2.2 mm² - Round stainless steel tube up to 30 x 1.5 mm - Square tubes: 20 x 2.5 mm - Bending time for 90 degrees: 1.5 sec (advance) - Longitudinal feed speed: 450 mm/sec - Maximum bending radius: 125 mm - Freestanding bending head, 850 mm long - Bending axis drive: electrohydraulic Dkodpfx Aeyg Iirjc Njh

Condition: good (used), Year of construction: 2008, control type: CNC control, Stainless steel tube diameter: up to 42 x 2.0 mm Steel tube diameter: up to 42 x 3.0 mm Max. bending angle: +/- 180 + 10° Section modulus: 4.1 ccm Dedpfx Asyg Ihzoc Nskh Operating pressure: 6 bar Total power requirement: 5.5 kW Machine weight approx.: 3 t Space requirement approx.: 6100 x 2300 x 1300 mm

Condition: good (used), Year of construction: 1998, Tube diameter: 20 - 60.3 mm Tube feed length: 4500 mm Machine weight approx.: 0.11 t Djdpfx Acjyg Ihhe Njkh Total power requirement: kW Space requirement approx.: 5700 x 1600 x 900 mm - Preselection of 4 bending angles via rotary selector

Condition: good (used), Year of construction: 1994, control type: CNC control, controller manufacturer: Siemens, controller model: 840 D, Tube diameter: 168.3 x 11 mm Insert length of tube: 6000 mm Maximum bending radius: 700 mm Control system: Siemens 840 D Minimum bending radius: 80 mm Maximum bending angle +/-: 190° Connected load: 400 V / 50 Hz / 85 A Dimensions (L x W x H): 11.9 x 2.7 x 2.45 m Machine weight approx.: 33 t Dkjdeyg Igqspfx Ac Njh Additional information: - CNC control: CNC MMI Multicontrol 2000 - Control system: NCU - PLC: Siemens Simatic S7 - Electrical connection rating: 400 V / 50 Hz / 85 A The machine is fully automatic and equipped with a tool changer. The following tooling is available: Tube Ø 48.3 mm; Radius 105 mm Tube Ø 60.3 mm; Radius 120 mm Tube Ø 63.5 mm; Radius 150 mm Tube Ø 76.1 mm; Radius 190 mm Tube Ø 88.9 mm; Radius 222 mm Tube Ø 114.3 mm; Radius 285 mm Tube Ø 139.7 mm; Radius 350 mm Tube Ø 141.3 mm; Radius 700 mm Tube Ø 168.3 mm; Radius 420 mm There were a few mandrels with a marking engraved directly on them. These had the following specifications: 88.9 x 8 mm; 88.9 x 4.5 mm; 114.3 x 8.8 mm; 139.7 x 8.8 mm; 168.3 x 12.5 mm; 168.3 x 8.8 mm The following outside diameters of mandrels were measured: 23.2 mm; 32.3 mm; 37.1 mm; 41.5 mm; 59.3 mm; 70.3 mm; 77.7 mm; 80.9 mm; 88.7 mm; 93.2 mm; 94.7 mm; 103.0 mm; 112.8 mm; 118.8 mm; 128.9 mm; 138.5 mm; 147.2 mm; 153.6 mm The accessory package is valued at approx. €150,000.

Condition: new, Electrically heated circulating air furnace (horizontal air flow) max. temperature: 550ᵒC useable dimensions (w x h x d): 900 x 1300 x 1800 mm charge weight: 800 kg gross heating power: 72 kW circulation fan: 1 x 7,5 kW Dkedpfx Asdt R Uujc Neh

Condition: new, Gas heated tempering furnace type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW Dedpfx Aecdixljc Njkh loading weight: 3.000 kg gross

Condition: new, temperature: max. 650°C heating power: 45 kW fan: 3,0 kW total connected load: approx. 52 kVA internal dimensions (l x w x h): 1.000 x 700 x 700 mm charge weight: max. 1,0 t Djdpsgyn H Nsfx Ac Nskh

Condition: new, Electrically heated circulating air furnace (horizontal air flow) max. temperature: 650ᵒC Dkedpjdhzimofx Ac Noh useable dimensions (w x h x d): 1000 x 1000 x 2000 mm heating power: 72 kW circulation fan: 1 x 4 kW

Condition: new, TECHNICAL DATA Dkodpfx Aceg Dgyms Noh type: gas-heated drive-through chamber furnace internal dimensions: (w x h x d): 2200 x 2350 x 3000 mm number of control areas: 2 Max. loading weight: approx. 2,5 t PLC: Siemens S7