Used Trumpf Trulaser 7040 for sale (410)

Condition: good (used), functionality: fully functional, Year of construction: 2009, operating hours: 14,367 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: TASC 6000, bending force (max.): 320 t, working width: 4,420 mm, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 3,680 mm, installation height: 615 mm, number of axes: 6, type of crowning: CNC-controlled, travel distance X-axis: 860 mm, back gauge adjustment: CNC-controlled, Equipment: CE marking, angle measuring system, documentation/manual, foot remote control, safety light barrier, TruBend Cell 5000 – Robotic Bending Cell 320t Complete Service History - 6-axis backgauge system with control cabinet air conditioning - Sensors for 6-axis backgauge - Hydraulic upper tool clamping - CNC crowning - Preparation for ACB - MobileControl - Rear work area lighting - Front work area lighting - Operator comfort package with screen, mouse, and keyboard - BendGuard - BendMaster 150 - Track extension 16,000 mm - NC grip re-orientation station - Double sheet detection - Right-hand side door for safety fence - Vacuum gripper - 3x pneumatic gripper couplings Kedpfx Agjylankjzeln - Robust machine frame in full-steel construction, ram stress-relieved annealed - 4-cylinder upper drive - Block hydraulic system with low-noise double pump - Backgauge with CNC-controlled X and R axes - Hydraulic upper tool clamping - Hydraulic lower tool clamping - Control cabinet cooling via air-to-air heat exchanger - Machine control network connection Control - TRUMPF TASC 6000 Safety - Standard safety equipment

Condition: used, Year of construction: 2009, sheet width 3050 mm plate thickness 6 mm rear stop 10-1000 mm cutting angle 0,5 - 2,5 ° down holder 20 Stk no. of strokes 14 - 23 Hub/min work height max. 900 mm oil volume 140 l total power requirement 11 kW dimensions of the machine ca. 4000 x 2150 x 1900 mm weight 7800 kg Equipment: - ELGO control unit type P50 - Automatic cutting angle adjustment - Automatic cutting gap adjustment - electric back gauge - Pneumatic sheet holding device - Light barrier behind the machine - 4 support arms - front finger guard - foot switch Klodpfx Aoyk Dhxogzon - Angle stop Operating instructions

Condition: good (used), functionality: fully functional, Year of construction: 2000, CNC press brake, 6 axes - Pressing force: 1,300 kN - Bending length: 3,060 mm - Number of axes: 6 programmable (X1, X2, R1, R2, Z1, Z2) - Y-axis rapid traverse: 200 mm/s - Y-axis working speed: 11 mm/s - Y-axis return: 135 mm/s - Travel speeds: X - 500 mm/s, R - 300 mm/s, Z - 1,000 mm/s - X-axis travel: 600 mm - Max. back gauge range X: 860 mm - R-axis travel: 250 mm - Y-axis stroke: 365 mm - Installation height: 535 mm - Y-axis tilt: ±10 mm - Bending length: 3,060 mm - Clear distance between uprights: 2,690 mm - Throat depth: 410 mm - Table width: 120 mm Kjdpfxsx S H Uxo Agzeln - Working height: 1,050 mm - Oil capacity: 250 l Dimensions: Width: 3,640 mm, Depth: 2,210 mm, Height: 2,885 mm Weight: 12,950 kg The machine can be inspected under power!

Condition: used, Year of construction: 2018, TRUMPF - TRUMATIC 6000 FIBER - 2018 - FIBER laser and punching press combi machine - 3000 W laser power - combined punching and laser mode: 3050 x 1550 mm - max. sheet thickness: 6.4 mm - max. punching force: 180 kN - active clamping force (programmable in stages): 4.5 – 20 kN - max. workpiece weight: 230 kg - linear magazine: 22 tools at 3 clamping jaws - MultiTool: 5- / 10-piece - tool change time: 0.3– 3.2 s - incl. SheetMaster and GripMaster Kledpfx Agsyl St Ejzsn - incl. many functions - sheet size large format 3000x1500 mm - 21 casette positions - under power - operating hours 54000+ - laser on hours 53000+ - punching hours under power 52887

Condition: used, Year of construction: 2017, TRUMPF - TRUBEND CELL 7000 - 2017 - system Siemens - including press brake TRUMPF TRUBEND 7036 - pressing force 217 kN - bending length 2x500 mm - clear passage between racks 1530 mm - useful installation height 300 mm - overhang 515 mm - BendMaster - max. workpiece size 500 mm x 380 mm Klsdpfx Asyl Strjgzen - max. workpiece weight 1.5 kg - max. payload 15 kg - min. sheet thickness 0.5 mm - max. sheet thickness 6 mm - under power 34000+ hours - manufacturing hours 18500+ - including robot

Condition: used, Year of construction: 2003, TRUMPF - TRUMATIC 5000R - 2003 - software WIN NT - 220 kN punching press - moves 3125x1650 mm - max 6,4 mm sheet thickness Kledpoyl I T Usfx Agzon - linear ATC for 21 tools (1600) + 4 sheet holders - tool holders (casettes) - weight appr. 17500 kg - tool holders - used condition as showed on photos - regularly maintained - sheet holders 4 - weight appr. 17500 kg - OPTIONS: MULTITOOL (5, 10 places) THREADING / Gewindeschneiden ENGRAVING / Gravieren SIGN / Signieren HANDLING ROLLING TOOLS / Umgang mit Rollwerkzeuge REPOSITIONING CYLINDER / Nachsetzzylinder - sheet waving monitoring - used condition - regularly maintained, good condition: NEW X axis NEW PARTS UNDER HEAD - due to informations LINEAR AMPLIFIER was changed in arround 2019 - short video available - in our warehouse, dismantled, not under power

Condition: used, Year of construction: 2001, TRUMPF - TRUMABEND V130 - years 2001 and 2003 Klodpfx Aeyl Izrsgzsn - 2 machines with bending help - 100 t - table 3000 mm - 1st machine is running with bending help (year 2001) - including some tools - have video too of 1st machine - 2nd machine has dismantled backgauge motor, but available (year 2003)

Condition: used, Year of construction: 2013, TRUMPF - TRUPUNCH 5000 S10 with ToolMaster - 2013 - type S10 - system Siemens Sinumerik 840D - year of manufacturing August 2013 - regularly maintained - work area 3050x1550 mm - including ToolMaster - 220 kN punching press - max 8 mm sheet thickness - max sheet weight upto 230-280 kg Kledeyl Izlopfx Agzen - max strokes (punching) per minute 1,600 / min for punching (E = 1 mm) - marking / decorative operations speed2,800 / min marking speed - linear ATC for 21 tools (1600) + 4 sheet holders - tool holders (casettes) - weight appr. 17500 kg - OPTIONS: This machine already has ACTIVE DIES (c2 axis moves in the “Z” direction). MULTITOOL GROOVING THREADING / Gewindeschneiden ENGRAVING / Gravieren??? SIGN / Signieren HANDLING ROLLING TOOLS / Umgang mit Rollwerkzeuge REPOSITIONING CYLINDER / Nachsetzzylinder - used condition as showed on photos - regularly maintained, good condition - under power hours 84545 (not working hours, operating hours appr. max 25000) - reason for sale change to laser cutting, a new laser came and needed space - short videos available

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: CNC control, controller manufacturer: Delem, bending force (max.): 50 t, working width: 1,280 mm, stroke length: 215 mm, number of axes: 4, Equipment: CE marking, foot remote control, Used Trumpf Trumabend V 50 Hydraulic cnc 50ton x 1.2metre Press Brake For Sale Kledpfx Agox Nip Hjzjn Brand: Trumpf Type/Model: Trumabend V50 Year:2000 Trumabend V 50 Technical details Capacity: 50ton x 1.2metre: Full bed length: 1280 mm CNC Brand: Delem Total axis: 4 Y1, Y2, X and R Axis

Condition: good (used), functionality: fully functional, Year of construction: 2013, control type: CNC control, degree of automation: automatic, actuation type: electric, laser power: 4,000 W, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 15 mm, sheet thickness aluminum (max.): 10 mm, FOR SALE: TRUMPF TruLaser 3030 L20 (4000 W) – Precision and Flexibility Available for purchase is a reliable TRUMPF TruLaser 3030 L20 laser cutting machine from the year 2013. This model is highly regarded for its balance of speed and precision, making it an excellent choice for versatile production environments. Key Technical Details: Power: 4000 W Max. Working Range: 3000 x 1500 mm Positioning Accuracy: 0.03 mm/m Kodpfxjyluv Ae Agzsln Axis Speeds: Up to 140 m/min (simultaneous) Cutting Speeds: 0.8 – 26 m/min Material Capacities: Mild Steel: Up to 20 mm Stainless Steel: Up to 15 mm Aluminum: Up to 10 mm Special Features: Equipped with an open loading and unloading station, this machine allows for rapid switching between different sheet sizes, significantly increasing operational flexibility. It has been maintained within a high-standard production facility with a documented annual throughput of 800 tons.

Condition: excellent (used), Year of construction: 2010, Tekol / Trumpf Laser Welding System Tekol LAP S4 with TRUMPF TruPulse 44 and TBH GL230 Extraction Unit Description: For sale is a professional laser welding system Tekol LAP S4 equipped with an integrated TRUMPF TruPulse 44 pulsed Nd:YAG laser and TBH GL 230 extraction and filter unit. This system is an enclosed precision laser welding station designed for fine, pinpoint, and low-distortion welding of metal components. The pulsed laser enables highly controlled heat input, clean weld spots, and reproducible results. Ideal for precision engineering, toolmaking, repair welding, prototyping, and small series production. Enclosed safety housing with protection system, control panel, rotary indexing table, and extraction/filter system. Technical Data – Tekol LAP S4 Operating voltage: 400 V ~ N / PE Mains type: 3~ 400 V, 50 Hz Nominal current: 32 A (approx. 22.5 kVA) Control voltage: 24 V DC Dimensions: Length: approx. 1330 mm, Depth: approx. 1300 mm, Height: approx. 2030 mm Weight: Machine: approx. 800 kg Travel: X-axis: approx. 160 mm Y-axis: approx. 100 mm Z-axis: approx. 100 mm Rotary indexing table: 2-station Technical Data – Laser TRUMPF TruPulse 44 Laser type: Nd:YAG pulsed laser Wavelength: 1064 nm Max. average power: 42 W Min. pulse power: 201 W Max. pulse power: up to 3 kW Pulse duration: 0.2 – 50 ms Max. pulse energy: 30 J Max. pulse frequency: up to 900 Hz Beam parameter product: 16 mm·mrad Technical Data – Extraction Unit TBH GL 230 Voltage: 230 V / 50–60 Hz Power: 0.36 kW Free-blowing air volume: approx. 390 m³/h Effective air volume: approx. 330 m³/h Max. negative pressure: 4000 Pa Sound level: approx. 51 dB(A) Weight: approx. 40 kg Multi-stage filter system: - Pre-filter - Particle filter - Activated carbon filter Total weight approx. 900 kg Condition: used Scope of supply: (see photos) - Tekol LAP S4 laser welding system - TRUMPF TruPulse 44 laser unit - TBH GL 230 extraction unit - Documentation / folders / data carriers - Keys and accessories as shown (Specifications and technical details are subject to change and errors!) Klodpeyi Sgasfx Agzjn If you have further questions, please feel free to contact us by phone.

Condition: used, Year of construction: 2000, machine/vehicle number: 883512, Dimensions: 257 cm width x 220 cm depth x 242 cm height Weight: 7,900 kg Max. pressing force: 850 kN (85 tons) Max. bending length: 2,050 mm Distance between uprights: 1,750 mm X-axis travel: 600 mm Max. stroke: 215 mm Controlled axes: X, Y, R, I Control system: Delem Equipment: 4 back gauges Condition: R-axis correction error. R-axis drops to the lower limit switch, must be raised manually (re-referenced). Y-axis (pressure beam) sinks at an angle. Kledpjylh Sqofx Agzjn Crowning: wedge crowning

Condition: used, functionality: fully functional, Year of construction: 1994, machine/vehicle number: 883050, Dimensions: 257 cm width x 220 cm depth x 242 cm height Kjdpfeylh N Nox Agzoln Weight: 8,320 kg Max. pressing force: 850 kN (85 tons) Max. bending length: 2,050 mm Distance between uprights: 1,750 mm X-axis travel: 600 mm Stroke height: 220 mm Controlled axes: X, Y, R, I Control system: Delem Equipment: 6 backgauges Condition: Technically flawless except for oil leakage Crowning: wedge crowning

Condition: used, Year of construction: 1990, machine/vehicle number: 050537, punching force: 25 t, power: 33 kW (44.87 HP), input voltage: 380 V, input frequency: 50 Hz, compressed air connection: 6 bar, We offer this used TRUMPF TRUMATIC 260 CNC punching machine, year of manufacture 1990. Maximum punching force: 250 kN Type number: 050357 Year of manufacture: 1990 Mains voltage and frequency: 380/50 V/Hz Connected load: 33 kVA Control voltage: 24 V Required fuse protection: 3 × 6.3 A Compressed air connection pressure: 6 bar If you have any further questions or require additional information, please feel free to send us a message or call us. Klodoyla Eijpfx Agzen

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, number of axes: 6, pressing force: 326 t, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4" color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: 2d graphic control da 69 on windows with 10. 4" color screen • Electrical equipment: for three-phase current 400 v / 50 hz • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack and pinion drive for X and R axes Kodpfx Aox D D Hysgzeln • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment • Backgauge system with 5 axes and control cabinet climate control • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Bending Length 1020 mm

Condition: good (used), functionality: fully functional, Year of construction: 2008, Electromechanical Press Brake Manufacturer: TRUMPF Model: TruBend 7018 Year: 2008 Technical Data Make: TRUMPF Model: TruBend 7018 Year of manufacture: 2008 Pressing force: 18 t Stroke: max. 150 mm Bending length: 510 mm Frame gap: 422 mm Power supply: 5 kVA Space requirements: L 1295 x W 1320 x H 2380 mm Weight: approx. 1,800 kg Kedpfxjyir Svo Agzoln Standard Equipment - Robust machine frame - Press beam - High-dynamic electronic direct drive (torque motor) - Inductive length measuring system with temperature compensation - Control cabinet air conditioning - Ergonomic machine design Special Equipment - Tool clamping system (Wila) top and bottom - Integrated TRUMPF TASC 6000 CNC control - Safety light curtain at the front - Backgauge system: 6 axes: X1, X2, R1, R2, Z1, Z2 - Comfort support table - BendGuard (with block laser) Safety - Side-mounted, pivoting safety doors - Two-pedal foot switch, for both standing and seated operation - CE certification Tooling Upper tool: straight punch R1/86°, H 120 mm, L 500 mm, segmented Lower tool: V-die V6/84°, R 0.6, H 100 mm, L 500 mm, segmented All information given without guarantee. Machine demonstration under power is possible at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2007, This TRUMPF TruBend V5050 press brake was manufactured in 2007. It features a press force of 500 kN and a bending length of 1275 mm. Equipped with a stable machine frame, electro-hydraulic upper drive, and a 2-axis backgauge system, it ensures precision and efficiency. Ideal for high-quality bending operations. Contact us for more information about this machine. Additional equipment • Stable machine frame as a welded construction in all-steel construction / Pressure beam with high bending strength / Spherical bearing of the pressure beam with pressure beam inclined position / Electro-hydraulic upper drive with 2-cylinder technology / Proportional valve technology and switchable double pump / Modern block hydraulics with control valves mounted on the cylinder / Electronic pressure compensator / Measuring system with centrally mounted glass scales and temperature compensation / Upper tool holder system "New Standard Clamping" manual, hardened, self-centering, for vertical tool changes / Lower tool holder with hydraulic clamping, hardened / Programmable lower tool displacement (pneumatic, 2 positions) / 2-axis backgauge system with rack and pinion drive for X and R axes, 2 stop fingers with secure front adjustment / Machine control: TRUMPF TASC 6000 / Control panel with LCD keypad, foot switch for emergency up, down, and emergency stop / Safety device: integrated side doors / Control cabinet cooling (air-to-air heat exchanger) / Oil cooler / Network-capable / Modern machine design / Installation, commissioning, and instruction / Hydraulic upper tool clamping / BendGuard / TruBend documentation Machine Benefits Technical Machine Benefits Kedex D Hb Hjpfx Agzoln • Press force: 500 kn • Bending length: 1275 mm / free column clearance: 1040 mm / installation height: 385 mm • The machine was serviced annually by trumpf. • Trumpf maintenance contract.

Condition: ready for operation (used), Year of construction: 2022, operating hours: 7,500 h, Metal 3D printer manufactured in 2022. This TRUMPF TruPrint 1000 multilaser features two 200W fiber lasers, providing multilaser productivity with 7,500 operating hours per laser. It is designed for high-precision dental and medical components, utilizing Bego Mediloy S-Co (Cobalt-Chrome alloy). Consider the opportunity to buy this TRUMPF TruPrint 1000 multilaser metal 3D printer. Contact us for further details. • Lasers: 2 x 200 W fiber lasers (multilaser) • Laser operating hours: 7,500 h per laser • Build volume: 100 mm diameter x 100 mm height • Material used: primarily BEGO Mediloy S-Co (Cobalt-Chrome) Kljdpfx Agjyifirszjn • Applications: high-precision dental and medical components • Condition: well-maintained; operated in a controlled laboratory environment • Handover: machine handed over at the laboratory gate

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,583 h, control type: CNC control, controller manufacturer: Bosch-Rexroth, controller model: Rexroth IndraMotion MTX, laser type: diode laser, laser source manufacturer: TRUMPF, laser source model: TruDisk 3000, laser hours: 7,583 h, laser power: 3,000 W, punching force: 16 t, punching diameter: 76 mm, sheet thickness steel (max.): 6 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, feed rate X-axis: 80 m/min, feed rate Y-axis: 60 m/min, overall weight: 13,200 kg, Equipment: CE marking, cooling unit, dust extraction, emergency stop, safety light barrier, Extended Station Equipment - Multitool function - MultiBend function - Thread forming function with thread counter Thread former breakage monitoring Lubricant level monitoring - Marking/fast bead function - Engraving function - Deburring and rolling technology function Extended Machine Equipment - 1x additional hydraulic clamp Kjdpfoyic Sdjx Agzeln Data Transmission - Wireless Operation Point - Mobile app control Standard Equipment: Machine - Enclosed machine frame - Hybrid axis system - Linear magazine with 20 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Repositioning device with programmable hold-down - Foot pedal for closing clamps - Beam protection with direct access - Part chute right - Part flap left - Sensor for part flap - Work area lighting - FocusLine - Retrofit capability for SortMaster Compact - Protective tool - Transport and assembly device TRUMPF Laser - Laser light cable according to standard layout (10m) - Laser power control - Laser logbook function - Enclosed beam guidance via laser light cable (LLK) - Separate power supply for TruDisk Compact Cutting Unit - Solid-state laser compact cutting unit - Protective glass - Collision protection - ControlLine Punch Head - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Spray lubrication for punches - Punch slug extraction - Forming function - Stroke counter for punches Control - TRUMPF control based on Rexroth IndraMotion MTX - Touch panel with 19'' TFT color display - Integrated technology data - Programmable cutting gas pressure - Remote support interface - Shutdown automation with wake-up function - Program management - Production plan Data Transmission - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety - CE marking - Two-beam safety light curtain Enhanced Standard Equipment - TruDisk 3001 solid-state laser with 1 LLK output - Cooling unit (water-air) - Compact extraction unit - 1st locating pin (inside right) - Ball tables - Good part container for part chute - Chip container for rear removal

Condition: good (used), functionality: fully functional, Year of construction: 1992, Performance and Mechanical Properties Parameter Value Pressing force (max.) 800 kN (approx. 80 tons) Stroke (max.) 200 mm Maximum operating pressure 295 bar Run-on time (Nachlaufzeit) 82 ms Basic Information Manufacturer: TRUMPF-PRIMETZHOFER (Linz, Austria) Machine type: Hydraulic Press Brake Model: TRUMABEND 80/2 DA 58 Year of manufacture: 1992 Performance and Mechanical Data Parameter Value Pressing force (max.) 800 kN (approx. 80 tons) Stroke (max.) 200 mm Max. operating pressure 295 bar Run-on time (Nachlaufzeit) 82 ms Safety distance 131 mm Machine weight 5,600 kg Electrical Parameters Klodpfx Aeykz Ucogzon Power output: 7.5 kW Voltage: 3×380 V Rated current: 16.2 A Frequency: 50 Hz Connected load: 10.7 kVA Accessories shown in photos included Safety distance: 131 mm Machine weight: 5,600 kg

Condition: new, Year of construction: 2026, Special Offer: TruMark Station 3000 Klodpfx Agoykvr Aszjn Maximum productivity, minimal footprint: Compact industrial solution for precise laser marking. Take advantage of our special offer now: TruMark Station 3000 package for only €24,950!* Get started with the ideal marking solution! The TruMark Station 3000 is a compact marking solution designed for precise laser marking of small to medium batch sizes. Small footprint, large working area: - TruMark Station 3000 equipped with electric door and motorized Z-axis - Suitable for workpieces up to 440 × 200 × 350 mm (W × H × D) - The One-Box Laser TruMark 5010 is supplied with an extraction unit Versatile applications: Whether annealing, engraving, or ablation – mark a wide variety of metals and plastics. The package includes a fixed configuration of the TruMark Station 3000 with the One-Box Laser TruMark 5010. * TruMark Station 3000 package valid until April 28, 2026. TruMark Station 3000 Workstation dimensions (W × H × D): 625 × 730 × 672 mm Electrical connection (voltage, frequency, current): 230 V, 50 Hz, 16 A Extraction unit: Type KKF 300 L Laser safety class: 1 TruMark 5010 Average power: 20 W Wavelength: 1062 nm Min. focus diameter: 40 μm Max. internal focus adjustment: 10 mm Marking field: 110 × 110 mm Focus finder, navigator: Yes

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, Operating hours: approx. 31,000 h. Kjdpfoyh Hq Uox Agzjln

Condition: like new (used), Year of construction: 2022, functionality: fully functional, punching force: 18 t, working range: 2,500 mm, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, Used Trumpf TruPunch 3000 S20 with Sheet Master Compact sheet load and unload for sale Technical data TruPunch 3000 medium format (S20) Dimensions, weights Width 6282 mm Depth 6548 mm Height 2195 mm Weight with all units 10700 kg Control, hardware, electrics Hard disk type SSD Number and size of the hard disc 2 GB x 120 GB Hard disk memory for customer programmes 10 GB Screen Touch screen Screen size 21.5 in Interface USB Network connection RJ45 Control type Bosch CML75 Operating system Windows 10 IoT Axis data X/Y/C axis drive NC-controlled, maintenance-free three-phase current servo motors Punching head drive Electric drive Maximum axis speeds - X axis 90 m/min Maximum axis speeds - Y axis 60 m/min Maximum axis speeds - Simultaneous 108 m/min Maximum axis speeds - C axis (punching) 350 rpm Maximum axis speeds - C axis (tapping) 350 rpm Maximum punching stroke rate (E = 1 mm) 800 1/min Maximum marking stroke rate 1000 1/min Precision - Positioning deviation Pa +/- 0.1 mm Precision - Position range Ps +/- 0.03 mm Precision - Smallest programmable increment 0.001 mm Working range and workpiece size Maximum sheet thickness 6.4 mm Maximum workpiece weight 150 kg Working range - X axis 2500 mm Working range - Y axis 1250 mm Ksdpfx Aeykt N Ssgzjln Punch-specific data Maximum punching force 180 kN Maximum presser foot force 20 kN Maximum tool size, punching (outer circle) 76.2 mm Maximum tool size, forming (outer circle) 101.6 mm Single tool changing time 2.8 s MultiTool changing time 0.5 s Number of linear magazine stations 20 pieces Number of tools when using MultiTool / clamps 18 pieces - 180 pieces Loading / part removal Maximum part size, part removal flap, punching 400 mm x 600 mm Flap size (X x Y) 400 mm x 1250 mm Maximum part size, fixed chute, punching 180 mm x 180 mm Connected loads, ambient temperature Pressure range, compressed air connection minimum (same direction) / maximum (static) 7 bar / 14 bar Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20 Switch cabinet/periphery grey, RAL 7040 SheetMaster Compact 2500 x 1250 mm (AK05) General Maximum Y1 axis traverse speed (suction frame) 27 m/min Maximum Y2 axis traverse speed (unloading cart) 18 m/min Maximum Z axis traverse speed 20 m/min Y/Z axis drive Asynchronous motors controlled by frequency converter Loading Maximum sheet size 2500 mm x 1250 mm Minimum sheet size 1000 mm x 1000 mm Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Unloading Minimum sheet thickness 1 mm Maximum sheet thickness 6.4 mm Maximum sheet weight 160 kg Maximum stack height 190 mm Painting Main colour white, NCS S 0505-R80B Secondary colour blue, RAL DESIGN 250 20 20

Condition: defective spare-parts repository (used), functionality: not functional, Punching machine. Metal punching machine, non-operational. Kledpfxox Tdcij Agzon

Condition: excellent (used), Year of construction: 2006, Trumpf VectorMark Workstation VWS 800 Year: 2006 Working area 700 x 300 x 350mm Dimensions 1385 x 1790 x 1000mm Weight approx. 420kg Klodsxxa D Dspfx Agzon Controlled 4.axis rotary table With computer and software as per photos. Accessories Documentations