Used Trulaser 5030 Classic for sale (680)

Condition: new, functionality: fully functional, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, overall weight: 345 kg, warranty duration: 24 months, water tank capacity: 70 l, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area coverage (m²/h): 2805 Battery (V / Ah): 24 / 105 Charger power supply (V / Hz): 95 – 253 / 50 – 60 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Scope of delivery and equipment: SONNENSCHEIN 12V 105Ah GEL BATTERIES (2x). NEOS 24V 10A EXTERNAL CHARGER 900mm V-shaped suction bar with oil-resistant polyurethane rubbers 510mm red disc brush - medium hard Features: Powerful drive Automatic water stop Solenoid valve 2-tank system Batteries and charger included: - Sonnenschein 105Ah batteries + Neos 24V charger included in the set - Easy charging at any standard outlet. - Mains-independent use without tripping hazards. Lhsdpfxexn I Suj Ahvod Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy operation thanks to a small number of yellow-coded controls. - Robust construction with integrated disc brush head. High surface performance thanks to a large working width. Brush changes are made via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model, powered by powerful 105 Ah batteries, as a viable alternative to walk-behind machines (batteries and a suitable charger are included).

Condition: used, functionality: fully functional, machine/vehicle number: 11579, operating hours: 225 h, load capacity: 6,000 kg, lifting height: 4,500 mm, free lift: 660 mm, fuel type: diesel, mast type: duplex, construction height: 3,190 mm, power: 55 kW (74.78 HP), fork carriage width: 1,320 mm, fork length: 1,200 mm, total length: 4,730 mm, drive type: Diesel, construction width: 2,000 mm, Sideloading forklift Chassis number: 11579 Load centre: 600 Fork width: 200 mm Fork thickness: 50 mm Mast type: Duplex Condition: As new Technical condition: New Front tire type: Pneumatic Front tire condition: New Rear tire type: Pneumatic Ledpfxox Ekx Ue Ahvohd Rear tire condition: New Description: Demonstration unit, available immediately! Price ex works, plus freight costs. Heating, full cabin, CE certificate, interior mirror, joystick, LED lighting, cross-cylinder extension system, 4 load platforms 1800 mm, BEGE comfort seat, Baumann yellow finish

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, operating hours: 18,000 h, machine/vehicle number: A0215A0232, laser power: 2,500 W, sheet thickness (max.): 15 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, positioning accuracy: 0.1 mm, overall weight: 8,900 kg, TECHNICAL DETAILS X-axis travel: 3,000 mm Ledpfxoyb Rzyj Ahvjhd Y-axis travel: 1,500 mm Laser power: 2,500 W Maximum sheet thickness (mild steel): 15 mm Maximum sheet thickness (stainless steel): 6 mm Maximum sheet thickness (aluminum): 5 mm Axis speed: max. 60 m/min Positioning accuracy: ±0.1 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): approx. 7,400 × 3,300 × 2,300 mm Machine weight: 8,900 kg Mains connection: 400 V / 50 Hz Connected load: 65 kVA Control voltage: 24 V Required fuse protection: 3 × 100 A Compressed air connection: 7–14 bar Nitrogen connection (N₂): 29 bar Oxygen connection (O₂): 14 bar Operating hours: approx. 18,000 h EQUIPMENT Automatic pallet changer FocusLine laser technology NitroLine laser technology Maintenance-free AC servo drives

Condition: new, functionality: fully functional, machine/vehicle number: 1.161-070.0, working width: 510 mm, area performance: 2,805 m²/h, warranty duration: 24 months, water tank capacity: 70 l, noise level: 66 dB, battery capacity: 105 Ah, Technical specifications: Condition - NEW! Catalog number: 1.161-070.0 Drive type: Battery (not included in the set) Drive: Traction motor Brush working width (mm): 510 Vacuum working width (mm): 900 Fresh/dirty water tank capacity (l): 70 / 75 Theoretical area performance (m²/h): 2805 Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 13 / 20 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 66 Gross weight (kg): 345 Weight without accessories (kg): 100 Dimensions (L × W × H) (mm): 1310 × 590 × 1060 Lhodpfx Aoxnzuishvod Scope of delivery and equipment: The set includes NO batteries and NO charger Squeegee 900mm V-shaped with oil-resistant polyurethane rubbers Disc brush 510mm red - medium-hard Features: Powerful drive Automatic water stop Solenoid valve 2-tank system The option of a machine ready to work with batteries and charger is available in our other listings. Advantages: - Self-explanatory symbols and a clear control panel. Short training phases. Easy handling thanks to a few yellow-coded controls. - Robust construction with integrated disc brush head. High area performance thanks to the large working width. Brushes are changed via pedal ejection. - Particularly maneuverable machine. Good overview of the surfaces to be cleaned. Easy transport. Key features: - Thanks to its slim and compact design, our battery-powered ride-on scrubber-dryer BD 50/70 R Bp Pack Classic with disc brush technology is extremely easy to maneuver and transport – even in elevators, for example. This positions the affordable entry-level model as a viable alternative to walk-behind scrubbers.

Condition: like new (used), Year of construction: 2013, operating hours: 400 h, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 20 kg, total height: 890 mm, total width: 986 mm, total length: 705 mm, overall weight: 170 kg, input voltage: 230 V, Equipment: documentation/manual, lighting, type plate available, SPECIAL OFFER with optional full service (delivery, commissioning) Technical Specifications of the HEXAGON OPTIV CLASSIC 321 GL tp Measuring Machine Year of manufacture: 2013 Maximum traverse speed in X, Y, Z axes: 160 mm/s Maximum workpiece weight: 20 kg Measurement resolution: 0.05 µm Measurement accuracy in X, Y axes (optical sensor): Ex, Ey = (1.6 + L/250) µm Measurement accuracy in XY axes (optical sensor): Exy = (2.0 + L/250) µm Measurement accuracy in Z axis (optical sensor): Exy = (3.9 + L/200) µm Measurement accuracy in X, Y axes (touch-trigger probe): Ex, Ey = (2.0 + L/250) µm Measurement accuracy in XY axes (touch-trigger probe): Exy = (2.5 + L/250) µm Lhedpfx Ajxmgvpshved Measurement accuracy in Z axis (touch-trigger probe): Ez = (2.9 + L/200) µm Measuring volume Optical Sensor: X 300mm Y 200mm Z 150mm Measuring volume tactile sensor: X 230mm Y 200mm Z 150mm Dimensions (L x W x H): 705 x 986 x 890 mm Machine weight: 170 kg Measuring machine features: 3-axis microprocessor CNC with vector path control Metrology software: PC-DMIS Vision Vision sensor for non-contact measurement of the smallest and most precise components CCD camera with 6.5x motorized CNC zoom DC servo motors TESA touch probe system (1 body and 1 module) Modular probe changer: TESASTAR with 4 slots and 4 modules Linear guides on all axes Coaxial LED incident light (white LED) LED backlight (green LED + diffuser) Multi-segment LED ring light Including evaluation computer by Dell Optional services: Delivery (extra charge) Commissioning (extra charge)

Year of construction: 1997, condition: used, functionality: unexamined, Emmegi Classic Single TU/4 double head saw with infeed and outfeed roller conveyors, s/n 242937 (1997) This lot is located in Farnworth, Bolton. Lhjdpfx Asyg Rfvohved Collection must be made on Tuesday 3rd March 2026.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2014, operating hours: 8,416 h, laser power: 3,200 W, sheet thickness steel (max.): 10 mm, sheet thickness aluminum (max.): 4 mm, pipe diameter (max.): 152 mm, working length: 6,500 mm, TRUMPF Tube Laser Cutting System with LoadMaster Tube 6.5 m and extensive additional equipment! TECHNICAL DETAILS Maximum tube diameter: 152 mm Maximum working length: 6,500 mm Material thickness (steel): 10 mm Material thickness (stainless steel): 5 mm Material thickness (aluminum): 4 mm Laser power: 3,200 W MACHINE DETAILS Control system: SIEMENS Sinumerik 840D SL Operating hours: 24,428 / 8,416 h EQUIPMENT - LoadMaster Tube 6.5 m with bundle magazine - Robust machine frame with integrated laser unit - Feed station with self-centering clamping jaws - Raw material tube support with automatically retractable pipe rests - Through-feed chuck with self-centering parallel clamping rollers - High-precision drives - Discharge station for finished workpieces up to 3 m in length - Tube support for finished parts with extendable guide rollers - Scrap conveyor with collection bin - Enclosed beam guide - NitroLine - FocusLine - Laser power control - Programmable cutting gas pressure - Automatic power on/off - Ergonomic control panel with touch color screen - Work area illumination - High-frequency excitation - Maintenance-free turbo radial blower - TASC 3 laser control - Laser logbook function - Cooling unit - Single cutting head strategy - Lens cutting head, 155 mm focal length - ControlLine - Simple operation - Online support - Diagnostic functions - Integrated technology data - Remote service via internet - RJ45 network interface and USB port - CE marking - Multi-beam light barriers - Monitoring system for gas pressure, temperature, and cooling water, among others - Compact dust extraction system - Protective enclosure with polycarbonate (Makrolon) panels - Jaw sets with clamping range 20–85 mm and 85–152 mm - Quick-change forming shells for round tubes up to 152 mm - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 85 mm) - Quick-change forming shells for rectangular tubes (up to a circumscribed circle of 170 mm) - Guide rollers for round and rectangular tubes - SeamLine Tube with inner seam detection - Adaptive clamping technology – feed station, small circumscribed circle Ljdpfeygu Tksx Ahvohd - Adaptive clamping technology – feed station, large circumscribed circle - Adaptive clamping technology – through-feed chuck, small circumscribed circle - Adaptive clamping technology – through-feed chuck, large circumscribed circle Note: The machine will be dismantled on 02/03/2026 and can be inspected under power until then.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, machine/vehicle number: A1221E0223, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, controller model: Sinumetrik 840 D SL, Equipment: CE marking, safety light barrier, Type: TruLaser 3030 fiber (L81), Year of manufacture: 2020, Working area: 3000 x 1500 mm, Laser power: 4000 watts, Control: Siemens Sinumerik 840 D SL, Max. sheet thickness/steel: 20 mm, Max. sheet thickness/stainless steel: 20 mm, Max. sheet thickness/aluminum: 20 mm, Max. speed: 170 m/min, Accuracy: 0.1 mm Dimensions: Length 9,229 mm, Width 6,145 mm, Height 2,200 mm, Weight: 11,700 kg Machine number: A1221E0223 Equipment: • Longitudinal conveyor belt • Integrated control cabinets • Integrated storage compartment • Work area lighting • Positioning laser diode • Spray device • Permissible ambient temperature: 5–40°C Lhjdpfxjxz Dwao Ahvjd • Machine status indicator • Dust protection for electronics panel TRUMPF Laser: • HighSpeed Cutting Package and Performance Package • Fusion cutting • Pump diodes drive • Laser power control Cutting Unit: • Single-cutting-head strategy • Universal cutting unit with adaptive lens system • Protective glass • Online protective gas condition monitoring • Automatic nozzle centering Control System: • SINUMERIK 840D SL control • Fast re-production • Integrated technology database • Copper cutting package • Brass cutting package • Automatic shutdown • Programmable selection of cutting gas/pressure • Microweld • Production planning • Remote support interface • Multi-sheet processing • Condition Guide • Cutting Guide • Advanced machine sensors for Condition Guide • Ergonomic control panel with 21.5" widescreen multi-touch display Functions: • AdjustLine • ControlLine • FastLine • FlyLine • NitroLine • PierceLine • FocusLine Data Transmission: • USB interface • RJ45 network port • Central Link • Online Update Manager Safety: • CE marking • Light grids • Multi-chamber extraction system • Machine enclosure with certified viewing window (right door) Additional Equipment: • Support rails made of structural steel • Compact dust extractor • TruDisk power supply via machine • Sliding roof • Automatic longitudinal pallet changer • External TruDisk 4001 solid-state laser with 1 fiber output included • 1 fiber output • BrightLine fiber • Performance Package fusion cut • HighSpeed cutting package • HighSpeed ECO cutting package • Drop & Cut • Integrated camera 1 for process monitoring • View of front work area (approx. 2.5 m) • Exhaust connection fitting for compact dust extractor • Wireless Operation Package + Including Storemaster

Condition: used, functionality: fully functional, 1. BALL RECIRCULATING UNIT KUVE20-B-1947 PART NO.: 386954 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: FR 2. WATER MANIFOLD COMPLETE PART NO.: 1996899 1 SET Machine: T3030 L20 3. WELDING HEAD WS OPTICS 1 SET Machine: T3030 L20 4. CUTTING HEAD LENS 250 D40 – 17616 PART NO.: 1497234 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: DE 5. (R)GRID VOLTAGE UNIT PART NO.: 0983675 1 PC. Machine: T3030 L20 6. BELLOWS Y-AXIS 93614-102-40 PART NO.: 0141394 1 PC. Machine: T3030 L20 7. EXPANSION VALVE TGEN 25TR MOP70 R134a PART NO.: 1627195 1 PC. Machine: 3030 6kW 8. BELLOWS X-AXIS 1854032 PART NO.: 606083 1 PC. Machine: T3030 L20 COUNTRY OF ORIGIN: IT 9. TRIODE UP TO 4KW RS3021CJ PART NO.: 903994 1 PC. Machine: T3030 BRAND: THALES Lhodox Uzblepfx Ahved 10. FILTERS 8 PCS. Machine: T3030 11. BELLOWS Y-AXIS PART NO.: 1226193 1 PC. Machine: T3030 5kW 12. DISK BELLOWS Y-AXIS PART NO.: 1353514 1 PC. Machine: T3030 5kW 13. BOX BELLOWS PART NO.: 0978079 1 PC. Machine: T3030 5kW

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 351.09.006.18, Subscrisa, DDG INSOLVENCY I.P.U.R.L., cu sediul în Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj, CIF RO27987796, nr. matricol: 2A0522, prin practician în insolvență Godorogea Daniel-Lucian în calitate de lichidator judiciar al societății ELEMENTO MOBILI S.R.L. - în faliment, in bankruptcy, en faillite, cu sediul social în mun. Dej, str. Dumbrava Roșie, nr. 6, et. parter, ap. 1, jud. Cluj, înregistrată la Registrul Comerțului de pe lângă Tribunalul Cluj, sub nr. J12/2389/2016, cod unic de înregistrare 36225390 desemnat în această calitate prin Încheierea Civilă nr. 1278 din data de 03.07.2025 pronunțată de Tribunalul Specializat Cluj în dosar nr. 442/1285/2025, Lhodpfxjyfg E Nj Ahved organizează licitație publică cu strigare, cu preț în urcare, pentru vânzarea individuală a bunurilor identificate în prezentul anunț Prima licitație va avea loc la data de 11.02.2026 la ora 15:00, la sediul DDG Insolvency I.P.U.R.L. din Cluj-Napoca, str. Septimiu Albini, nr. 115, jud. Cluj. În caz de neadjudecare licitația se repetă în data de 18.02.2026, 25.02.2026, 04.03.2026, 11.03.2026, 18.03.2026, în aceleași condiții și la aceeași oră. În vederea vizionării bunurilor, lichidatorul judiciar va stabili o zi de vizionare în data de 04.02.2026 între orele 10:00-14:00. Cei interesați de vizionare sunt invitați să contacteze lichidatorul judiciar la și să își exprime intenția de participare, anterior datei stabilite. În caz de adjudecare, lichidatorul judiciar va emite factura fiscală pentru contravaloarea bunurilor adjudecate. Conversia prețului în lei se va realiza la data emiterii facturii fiscale, utilizând cursul de schimb stabilit de BNR pentru acea dată. Pasul de licitație este de 5% din prețul de pornire. Caietul de sarcini în vederea participării la licitație va fi întocmit de către lichidatorul judiciar în concordanță cu uzanțele în materie, va conține regulamentul de participare la licitație și se va valorifica de către practicianul în insolvență, la prețul de la prețul de 500 lei+TVA pentru bunurile de până la 5.000 euro și de 1.000 lei+TVA. pentru bunurile de peste 5.000 euro. Acesta poate fi achiziționat de la sediul lichidatorului judiciar, sau telefonic urmând a fi transmis participantului prin e-mail. Garanția de participare la licitație va fi în cuantum de 10% din prețul de pornire. Aceasta împreună cu documentația de înscriere la licitație vor trebui depuse cu cel puțin 24 de ore anterior datei licitației la sediul lichidatorului judiciar. Garanția de participare la licitație va fi dedusă din prețul bunurilor pentru care participantul a fost declarat adjudecatar și va fi restituită persoanelor care nu au fost declarate adjudecatari. La preț egal, va fi declarat adjudecatar persoana care se va angaja să achite întregul preț în termenul cel mai scurt. Termenul de plată al prețului va fi de 5 zile lucrătoare de la momentul adjudecării. În cazul în care nu se va achita și restul de preț, adjudecatarul va pierde avansul achitat cu titlu de garanție și nu va mai putea participa la următoarele licitații care se vor organiza.

Condition: used, Year of construction: 2018, operating hours: 20,000 h, machine/vehicle number: A0261G0108, laser hours: 20,000 h, laser power: 4,000 W, warranty duration: 1 months, Equipment: centralized greasing system, documentation/manual, emergency stop, BTH IMPORT STAL Sp. Z o.o is offering for sale: TRUMPF TruLaser3060 L66 + TruDisk4001 Fiber source: TruDisk4001 (4000W) Working area: 2500x6000 mm Operating hours: 20,000 Lhodjwf Epuepfx Ahved Laser-on hours: 42,000 The machine is in continuous operation. Visits and tests are welcome.

Condition: good (used), Year of construction: 2010, Trumpf TruLaser 3030, Year of manufacture 2010 / Commissioned 2011, Control unit: Sinumerik 840 D SL, Working area: 3000 x 1500 mm, Pallet changer, Trumpf CO2 Laser TruFlow 3200, Quick-change cutting head system, Height control, Sheet outer edge detection, Lens cutting head with 130 mm lens, Lens cutting head with 250 mm lens, HighSpeed cutting package for rapid cutting of sheet thickness up to 1.5 mm, Network connectivity via ExtensionCube, Machine has been regularly serviced, Hose replacement has been performed, Resonator quartz tube replaced, Laser power: 3200 W Operating hours: 72,871 Ljdpfx Ahjydc Nzovohd Laser on: 26,337 hours

Condition: new, - NEW-descriptionCutting plane directly on the saw bladeHeavy steel and cast iron constructionPrecision-guided format sliding carriage made of aluminium,anodized as standardLarge-area table extension guided on a telescopic arm andlongitudinally adjustableExtendable aluminum telescopic fence, angle adjustable with professionalstop flapsRip fence with quick release and fine adjustmentLarge work table made of milled gray cast iron stays permanently flatThe standard table extension and table extension enable easy work with larger workpiecesQuiet running and precise cutsEquipped with a powerful three-phase motorThe large dimensioned cast iron sawing unit is attached twice to the cast iron table and guarantees stability, precision, smooth running and a long service lifeMaximum cutting height is also achieved with the built-in scoring deviceEquipment details:Double cradle saw unitGenerously dimensioned, made of steel/cast ironClose to the saw blade, supported on both sides for precision, smooth running and a long service lifeAdjustable in height and up to 45° with a crankMaximum cutting height is also achieved with the built-in scoring deviceAlso available with scoring unittelescopic stopExtendable telescopic stop up to max. 2550 mmAngle adjustableWith professional stop flapsAluminum sliding carriageWith a thousand times proven ball contact systemInsensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail10-year Holzkraft guarantee on wear and tear on the guidewaysRip fence with round rod guideWith fine adjustment and quick releaseStable round rod guide made of ground steel with a diameter of 45 mmCan be folded down as standard for cutting large workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 380 kgConnection suctionSuction connection diameter 120 mmSuction connection diameter saw blade protection 60 mmMachine body length 1388 mmWorking area length 1000 mmMachine body width/depth 689 mmWorking area width/depth 2000 mmSpace required length 5118 mmSpace requirement width/depth 3830 mmelectrical dataConnection voltage 400 VDrive motor power 5.0 kWPhase(s) 3 PhNominal operating mode drive motor S6Type of current ACDuty cycle drive motor 40%Mains frequency 50 HzSliding carriage and tableFormat slide length 2250 mmTable length 840 mmFormat sliding carriage width 270 mmTable width 560 mmFormat sliding carriage height 124 mmTable height 900 mmcircular saw unitCutting width with rip fence 900 mmMax. cutting height 90° 90 mmMax. cutting width to the left of the saw blade 2310 mmMax. cutting height 45° 63 mmtrimming length 2250 mmSaw blade diameter 315 mmSaw blade inclination 90 - 45°Saw blade speed 4000 rpmArt. No. 5504323Ausziehbarer Teleskop-fence to max. 2550 mmWinkeladjustableMit Profi-AnschlagklappenAluminium-sliding tableMit tausendfach bewährtem KugelkontaktsystemStaub- and schmutzunempfindlich durch minimalen Berührungspunkt zwischen Kugel and Trapezschiene10 Jahright hand Holzkraft-guarantee on abrasion der Führungsbahnenrip fence with round rod guidingMit fine adjustment and quick clampingStabile round rod guiding aus geschliffenem steel with 45 mm diameterSerienmäßig tiltable for den Zuschnitt großer WerkstückeTechnische Daten:dimensions and Gewichteweight (Netto) ca.   380 kgAnschluss Absaugungsuction nozzle diameter   120 mmsuction nozzle diameter Sägeblattschutz   60 mmAufstellinformationenTransportbreite   900 mmErläuterung required spaceDie d... Lhsdpfx Asvyuqfjhvsd

Condition: new, New -RUWI Tischfräse Classic- Save working time with tools that can be called up: set up oncethe drive unit is always put back on with a flick of the wristpreset position- Mobile and flexible use in industry and trade: chamfers, grooves,flush milling- Supplement to the table and CNC milling machine- Quality and efficiency thanks to a durable, high-performance motorTechnical specifications:Function: router / under routerTable length: 640 mmTable width: 500 mmTable height: 910 mmDrive units: 3Power consumption: 1050 wattsVoltage: 230 voltsSpeed: 8000 - 25000 rpm steplessMobility: 4 swivel castersCollets: Standard ø8mm, optional ø6mm / ø6.35mm / ø10mmMilling stroke: 43 mmDust extraction connection: 120mmTools on demand: 3Tool height repeatable: YESRetrofittable drive units: No (up to 5 pieces for RUWI spindle moulder L)Weight: 91kg– Completely pre-assembled RUWI spindle moulder M with 3 drive units– Tool concealment– Removable suction tunnel with suction socket ø 120 mm- Operation manualNo. 10002 Lhodpfxevwf Shj Ahvod

Condition: used, Year of construction: 2000, Working width .- mm Lhodpjvwfl Usfx Ahvjd With 1 sanding unit consisting of:- combination unit with electronic shoe for lacquer sanding- lacquer sanding- dust brush- roller table at infeed 270 mm- program control electronic f. 50 programswith brand-new feed carpetusedmake Bütferingtype Classic 111 Cyear of construction 2000machineNo. 63608Working width 1100 mmPassage height 160 mmCE type-testedGS wood dust testedBelt dimensions 1120 mm x 1900 mmFeed speed 4 8 m/min.1 piece combi unit 3.7/7.5 15 kW , 3 belt speeds with autom. steel rollerdiameter 130 mmbelt speed approx. 4,5 9 18 m/selectronic link shoesegment pitch 50 mmfor lacquer sanding workpiece controlledstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty

Condition: new, - new-manufactured by Ruwitype Classic- Save working time with tools that can be called up: Set up oncethe drive unit can be reset to the preset position with a flick of the wristplaced- Mobile and flexible use in industry and trade: chamfers, grooves,flush milling- Supplement to the table and CNC milling machine- Quality and efficiency thanks to a durable, high-performance motorTechnical specifications:Function: router / under routerTable length: 640 mmTable width: 500 mmTable height: 910 mmDrive units: 3Power consumption: 1050 wattsVoltage: 230 voltsSpeed: 8000 - 25000 rpm steplessMobility: 4 swivel castersCollets: Standard ø8mm, optional ø6mm / ø6.35mm / ø10mmMilling stroke: 43 mmDust extraction connection: 120mmTools on demand: 3Tool height repeatable: YESRetrofittable drive units: No (up to 5 pieces for RUWI spindle moulder L)Weight: 91kgwith:1 Ruwi unit fine adjustment No. 104501 Ruwi fence for table router Classic No. 10150 Ledpfxsvwf Suj Ahvjhd

Condition: good (used), CNC control, card slot, control cards, plug-in cards, circuit boards, control rack, electronic module Lhjdpfjvpfaisx Ahvjd -Manufacturer: Infra-Antriebe Hans Nelk, Control Electronic Modul Classic -Type: Q1-230 -Individual components: see photos -Dimensions: 240/200/H100 mm -Weight: 3.2 kg

Condition: used, functionality: unexamined, Year of construction: 2011, operating hours: 35,623 h, machine/vehicle number: A1225A0041 / L20, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Siemens, controller model: SINUMERIK 840D SL, laser type: CO₂ laser, laser source manufacturer: Trumpf TruFlow 3200, laser hours: 35,623 h, laser power: 3,200 W, laser wavelength: 10,600 nm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, working length: 3,000 mm, working width: 1,500 mm, working height: 115 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, feed rate X-axis: 100 m/min, feed rate Y-axis: 200 m/min, feed rate Z-axis: 80 m/min, cutting speed: 140 mm/min, positioning speed: 140 m/min, repeat accuracy: 0.05 mm, workpiece weight (max.): 900 kg, power: 3.2 kW (4.35 HP), input voltage: 400 V, input current: 100 A, input frequency: 50 Hz, type of input current: DC, type of cooling: water, overall weight: 12,000 kg, total length: 6,500 mm, total width: 7,600 mm, total height: 2,200 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, safety light barrier, The machine was covered by a maintenance contract with Trumpf until 2023 and was serviced exclusively by Trumpf! Technical Data: - Laser power: 3,200 watts (3.2 kW) CO2 laser source (TruFlow 3200) - Operating hours: NC control: 35,623 hours Resonator / Pump 1: 34,258 hours Beam On / Pump 2: 10,155 hours - Working area (X/Y/Z): 3000 mm x 1500 mm x 115 mm - Maximum sheet thickness: Lhsdpfx Ajxc E Rqohved Mild steel: up to 20 mm Stainless steel: up to 12 mm Aluminium: up to 8 mm - Feed rates: X-axis: 3000 mm/min Y-axis: 1500 mm/min Z-axis: 115 mm/min - Positioning speed X/Y: 140 m/min - Smallest programmable increment: 0.001 mm CNC control: Siemens SINUMERIK 840D SL

Condition: new, functionality: fully functional, working width: 510 mm, area performance: 2,040 m²/h, overall weight: 112 kg, input voltage: 230 V, water tank capacity: 60 l, Technical specifications: Condition - NEW! Catalog number: 1.127-002.0 Power supply: 230V cable Drive: Propulsion via brush rotation Brush working width (mm): 510 Suction working width (mm): 900 Fresh/dirty water tank capacity (l): 60 / 60 Theoretical cleaning capacity (m²/h): 2040 Lodpfx Asya Et Uohvjhd Brush speed (rpm): 180 Brush contact pressure (g/cm² / kg): 27.3 – 28.5 / 20 – 23 Water consumption (l/min): max. 2.3 Sound pressure level (dB(A)): 67 Color: anthracite Total weight with water (kg): 112 Weight without accessories (kg): 52 Dimensions (L × W × H) (mm): 1170 × 570 × 1025 Scope of delivery and equipment: 900mm V-shaped suction bar with oil-resistant polyurethane rubber pads 510mm red disc brush - medium-hard Features: 2-tank system Advantages: - Self-explanatory symbols and clear control panel. Solenoid valve for automatic water shut-off after releasing the dead man's switch. Easy operation thanks to a few yellow-coded controls. - Highly maneuverable and easy to handle. Excellent visibility of the area to be cleaned. - Designed for daily use. Robust, durable, and reliable machine. Key features: - Options for attaching hooks, containers, mops, etc. - Additional cleaning supplies can be carried. - Excellent value for money.

Condition: used, functionality: fully functional, Year of construction: 2019, laser hours: 5,780 h, laser power: 4,000 W, TRULASER TUBE 7000 FIBER 4kW Year of manufacture: 07/2019 Laser power: 4kW fiber Laser on: 5780 h (!) Ljdpfx Ahjyalb Eovehd Technical information: - Max. outside diameter: 254 mm - Loading and unloading - Loading with LoadMaster Tube: 6,5m / Automatic unolading: 4,5m - RapidCut  Use of a dynamic additional axis  More than fourfold accelerations possible Bevel cut technology package  Bevel cutting up to 45°  Contains electrically movable feed-through chuck - PierceLine  Optimized piercing process - Technology package for tapping • Additional machining processes such as flow drilling, tapping and twist drilling • NC controlled spindle with standard clamping system (standard interface HSK-A32) • The application and technology parameters of the tool adapter and tools should be requested from the respective supplier • 8-fold tool changer ...and many more options!

Condition: new, Year of construction: 2025, FS 41 classic Tersa - Thicknessing planer with TERSA quick-change system for planing knives With TERSA cutterblock for changing planing knives in seconds TERSA planing knife system enables particularly quiet running Skew toothed steel infeed roller for constant and uniform wood infeed The extra long dressing tables made of one piece allow easy dressing of the workpieces Large dressing fence can remain in position when opening the dressing tables Rear opening dressing tables The high machine weight ensures highest precision and smooth running Powerful industrial motor Robust steel/cast iron construction Model FS 41 Classic Tersa Article-No. 5503414 Technical data ---Technical data dressing tables--- Total length of the tables 1800 mm Feeding table length 920 mm table height 870 mm working width 410 mm max. chip removal 4 mm ---Technical data thickness--- dimensions thickness table 605 x 420 mm min./max. working height 3 / 230 mm feed speed 7 m/min. planing shaft-Ø / planing knives 72 mm / 3 pcs. speed 5200 1/min motor 400V/50Hz/S6 40% 5,0 kW (6,6 PS) Suction nozzle diameter 2 x 120 mm Weight 270 kg Tersa planing cutter No more adjusting and screwing Change of planing knives in seconds Self-locking Lhsdpfjcnxayjx Ahvsd Especially low noise Planing mills solid backstops prevent the backstroke of workpieces 3-blade shaft Tersa for optimal planing pattern The wood infeed helical toothed steel infeed rollers for an

Condition: as good as new (ex-display), Year of construction: 2026, ST 3 classic F 23 - Combined sawing-routing machine With tiltable saw blade, tiltable milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast iron table High-precision format sliding carriage made of anodized aluminum (travel 2250 mm) Large extension arm (900 x 600 mm) with telescopic aluminum stop Max. Saw blade Ø 315 mm with scoring device, swiveling from 90°-45°. Saw parallel fence with fine adjustment Stable sawing unit and large dimensioned double cradle frame unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free cast iron Lhsdpfx Ajcnwydjhved 3 milling speeds, manually adjustable from 3.500 - 10.000 min-1 With right-left rotation of the milling spindle Standard arc milling protection hood Two 5.0 kW motors with high power reserves Cast iron milling unit top mounted on both sides precision ball bearings on top close to the lever point four optimally graduated milling speeds, enabling the grinding of workpieces Powerful motors Industrial motor, 100% duty cycle suitable for continuous use (full load) Scope of delivery: Curved fraise protection hood anodized aluminum format sliding carriage aluminum stop jaws folding stop jaws Technical data Dimensions cast iron worktable 1112 x 430 mm working length 2250 mm max. saw blade Ø with/without scoring 315 mm max. cutting height at 90°/45° 100/70 mm max. cutting width 2660 mm saw blade tilting 90° - 45° cutting width 900 mm speed 4000 1/min. table cutter - spindle tilting 90° - 45 useful length of spindle 100 mm max. tool Ø 210 mm max. tenon tool Ø 275 mm max. tool-Ø retractable 180 mm speeds 3.500/7.000/10.000 1/min. General - motor power 400 V/50 Hz/S6 40% 2 x 5,0 kW ( 6,6 PS) Weight 470 kg Suction nozzle-Ø 2 x 120 mm Suction nozzle-Ø saw blade guard 60 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Cut-size circular saw with tiltable saw blade and high-quality sliding table made of anodized aluminum Cutting plane of the small-format circular saw directly on the roller table Precision-guided sliding carriage made of anodized aluminum, standard finish Large table arm guided on telescopic arm and longitudinally adjustable The standard table widening and table extension allow easy working with larger workpieces. The large dimensioned sawing unit made of grey cast iron is double mounted on the cast iron table and guarantees stability, precision, smooth running and a long service life. Large work table made of ground grey cast iron, therefore extremely robust and insensitive smooth running and precise cuts Aluminium sliding carriage With millionfold proven ball contact system Insensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail 10 years HOLZKRAFT warranty on wear of hardened guideways Telescopic stop Extendable aluminium telescopic stop Angle adjustable With two professional folding fences Rip fence Standard with fine adjustment and quick clamping Lodpfxscnxams Ahvehd Scope of delivery: Table extension Table extension Anodized aluminium sliding carriage Rip fence with round bar guide and fine adjustment Model SC 2 classic Article no. 5504215 Technical data table dimensions 1020 x 325 mm table height 900 mm working length 1660 mm Cutting height max. 90° with scoring 100

Condition: as good as new (ex-display), Year of construction: 2025, Planer-thicknesser Holzkraft FS 30 Classic Tersa with Tersa cutterblock and planing knives - quick change system Tersa planing knife system enables knife change in seconds and particularly quiet operation Skew toothed steel infeed roller for constant and uniform wood infeed Extra long planing tables Large dressing fence can remain in position when opening the dressing tables. Rear opening dressing tables Lhsdpfobuldyex Ahved High machine weight Powerful industrial motor Robust cast steel construction Total length of the tables: 1510 mm Feed table length / table height: 740 mm / 850 mm working width: 300 mm max. chip removal: 4 mm dimensions thicknessing table: 565 * 300 mm min./max. working height: 3/230 mm feed speed: 7m/min planer shaft diameter / planer knives: 72mm / 3 pcs. speed: 5200 rpm motor 400V/50Hz/S6 - 40%: 4,0kw (5,5PS) Suction nozzle diameter: 2 * 120 mm Scope of delivery: Tersa planer cutterhead Anodized planing fence Available ex stock Bitburg - immediately available-

Condition: as good as new (ex-display), Year of construction: 2026, Combi 4-fold HOLZKRAFT CU 300 Classic F 23 N -- Technical data -- - Circular saw - circumference 2.250 mm max. saw blade Ø 315 mm max. cutting height at 90°/45° 103 / 82 mm max. clearance width left of saw blade 2.310 mm cutting width at rip fence 820 mm saw blade inclination 90° -45° - Dressing - working width 300 mm planing table length 1.510 mm Lodpfeci Tvhex Ahvjhd planing shaft Ø / number of planing knives 72 mm / 3 pcs. - Thickness table dimensions 300 x 585 mm min./max. working height 3 / 230 mm max. chip intake 4 mm feed speed 7 m / min -table milling machine - useful length spindle 100 mm max. tenon tool Ø 275 mm max. tool-Ø 210 mm spindle speed 3.500 / 7.000 / 10.000 rpm spindle-Ø 30 mm - general - motor power 400 V / 50 Hz, 3 x 5,0 kW (6,6 PS) Suction nozzle-Ø 4 x 120 mm suction nozzle-Ø saw blade protection 60 mm - Special offer price - Location: ex stock 54634 Bitburg