Used Trolley for sale (1,539)

Condition: used, Smoke chamber 1 trolley Adjustable air circulation Pneumatically controlled fresh air, exhaust air, and smoke damper Cleaning: foam cleaning Smoke feeding: on customer request Smoking material: wood chips Fgodpfx Adewr A Eys Isd Without the after-burning system

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, Heavy-duty transport trolley for weights up to 35 tons. The transporter is supported by four pivoting heavy-duty wheels and two omnidirectional drive wheels (--> in any desired direction). The drive wheels are pneumatically pressed onto the ground to achieve optimal traction. By rotating the two drive wheels, the various drive modes of the transporter are activated. This creates a very flexible transporter that can move longitudinally, laterally, and rotate on the spot. The transporter integrates a 35-ton lifting table, the contact surfaces of which are equipped with heat sinks to dissipate the heat emitted by the pallet (during the transport of warm/hot material). The lifting system is driven by a central motor, and the power transmission takes place via two gearboxes and axles that run through the frame. These axles drive 4 shafts at the corners of the transporter. Depending on the transport goods, a device can be constructed that is supported by the lifting system. Fsdpfx Aexa Endsd Iegd The entire system is protected by aluminum covers, each of which is numbered so that it can be easily reattached in the correct position after maintenance. The transporters are designed to move a maximum load of 35 tons with a maximum speed of 1.5 km/h in manual mode and 1 km/h in semi-automatic mode. The speed can be adjusted continuously via the manual control with joysticks. Without a load and in manual mode, the transporter can reach 2.5 km/h; in semi-automatic mode, the speed is limited to 1.5 km/h. Control: SIEMENS SIMATIC Operation: Radio remote control Drive: Battery-powered Dimensions approx. 3600 x 2500 x 800 mm

Condition: used, Used equipment Features and technical data: - 2 L-shaped uprights with support tubes - 12 support tubes per upright - Clear height: 92 mm - Plug-in system for adjusting the clear height - Support tube diameter: 29 mm - Usable length of support tubes: 770 mm - Maximum load capacity of entire trolley: 500 kg (requirement: evenly distributed load, no impact loads) - Maximum load on 2 support tubes: 45 kg Fgedpjy Ap U Njfx Ad Ied - 4 swivel castors with ball bearings and cast polyurethane coating, 160 mm - 2 castors with locking devices - Dimensions LxWxH: 500 - 3000 x 845 x 1840 mm Availability: short notice Stock location: 63934 Röllbach

Year of construction: 2024, condition: new, Mobile panel transport cart New demo unit, year of manufacture: 2024 - Stacking of panel heights up to 1,600 mm, electrically operated - Tilt angle forward/backward 100°, electrically operated - Head joint rotation angle CW/CCW 180° Fodpfx Aow I Upnsd Iogd - Head joint rotation angle: 360° - Load capacity 120 kg - Panel sizes up to 2,100 x 3,200 mm - Total height 2,090 mm - With 6 high-performance suction pads, width adjustable The Mobilifter ML-120 consists of: - A mobile chassis - An electric lifting and tilting system - An automatic vacuum unit - A wireless electric control - Weight 170 kg Availability: short notice Location: Flörsheim

Condition: new, Universal panel transport assistant Ideal, space-saving aid for edge banding machines, panel saws, and all other processing machines where the workpiece needs to be moved. Height-adjustable panel transport assistant Fodpow I Uz Rjfx Ad Ijgd Working height infinitely adjustable from approx. 900 mm to approx. 1,200 mm Special polygonal body with anti-slip coating for optimal grip in any position 5 heavy-duty swivel castors with high-quality locking mechanism for stable standing Automatically moves along edge banding machines and panel saws Weight: approx. 8 kg Availability: in stock Storage location: Hochheim

Condition: used, Plate trolley as a welded construction made of steel used one-sided loading area made of plywood 5° incline Side bar height: 915 mm Trolley powder-coated RAL 5010 gentian blue permanent or surface-protected impact and scratch-resistant tires made of thermoplastic rubber on plastic rims with precision deep groove ball bearings, gray, "no marks" thread and foot protection 2 swivel castors with wheel locks and 2 fixed castors 1500 x 370 Wheel diameter (mm)200 x 40 Fsdpfjwkbayox Ad Iegd Load capacity (kg)500 Weight (kg)47.5 Dimensions (WxDxH, mm)1500 x 680 x 1200 Availability: short term Storage location: Flörsheim

Condition: new, Panel swivel cart new suitable for Fimal Concept 350 pressure beam panel saw Fodpfew I U A Ijx Ad Isgd complete including 4 swivel castors (2 lockable) 12 all-direction rollers and a foldable support table Availability: short-term Location: Hochheim

Condition: new, The comfortable Varioflex rack trolley is designed for the flexible and gentle storage of painted workpieces. Additionally, its 4 swivel castors allow for easy transportation of the workpieces. Its robust tubular frame construction can be adjusted from 200 to 2000 mm. With 17 inner and outer support tubes per side, the trolley can carry loads up to 400 kg when evenly distributed. The removable inner and outer support tubes can be taken out if required and reinserted at the back. When not in use, the rack trolley can be compactly folded for space-saving storage. Fgjdpfew I Ux Nsx Ad Ied Optional accessories: - Plastic-coated support tubes - Additional rack Technical Data: Length: 200 - 2000 mm Depth: 870 - 1180 mm Height: 1855 mm Support tube length: 650 mm (extendable to 1150 mm) Clear distance between the tubes: 70 mm Capacity: 400 kg The image shows optional accessories (additional rack).

Condition: used, Used order picking trolley with 25 compartments, clear spacing between bars approx. 30 mm; Fsdpfx Adow I U Tmo Ijgd bars individually removable swivels for larger workpieces support surface 1390 x 580 mm W x L x H 1500 x 630 x 1230 mm mobile, with brakes Availability: short notice Storage location: Flörsheim

Condition: good (used), functionality: fully functional, total length: 2,100 mm, total width: 650 mm, total height: 2,100 mm, Werner & Pfleiderer WP stainless steel fermentation trolley, mobile with 10 aluminum trays with top extraction Fgsdey Ebhtjpfx Ad Ijd good cotton cloths for WP Matador multi-deck oven Used equipment

Condition: used, - Year of construction: unknown - min. part length 320mm - Max. part height approx. 210mm - number of levels 7 Stk. - distances between levels 100 mm - insert depth 650 mm - number of vertical posts 300-450-450-300mm, 5 Stk. - overall height 1740 mm Fsdpfx Aozf N Hnod Isgd - Overall width 1.540 mm

Condition: excellent (used), Year of construction: 2007, 160 USED Wachtel Compact 1.8 Oven. TECHNICAL DATA: - baking tray (trolley) dimensions: 60x80. EQUIPMENT: Fsdsxl Ebnopfx Ad Ijgd - gas burner, - 2 baking trolleys. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN. ..... bakery oven, bakery ovens, bakery machine, bakery machines, bakery equipment, bakery equipments, bakery device, bakery devices

Condition: good (used), 314 USED Transport trolleys for bakery baskets of 20x40 cm. Fsdpfsypcadsx Ad Isgd We have: 22 pieces. The price is a net price. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: like new (used), Large quantity of racks and trolleys for 1300mm retorts. Have been used for pouches and ready meal trays. Up to 180 units available. Fgodpfxoihgdgo Ad Ied

Condition: good (used), Lagarde 4 trolley retort. Being removed from factory this month (August 2024). Fgjdpfx Adsudx Spj Iod

Condition: good (used), Several hundred retort trolleys with trays. Lovely condition. Fgjdper Iyu Tefx Ad Isd

Condition: excellent (used), 3 x 4 trolley retorts from recently closed UK Babyfoods factory. 1300mm models. Complete with trolleys and baskets for cooking / pasteurising pouches. We have the complete contents of this factory available. Fgsdpsy I Dh Iofx Ad Isd

Condition: good (used), We have over 150 of these in stock. Were used for retort cooking bags and trays of rice and put into 1300mm wide retorts. Fsdpfxjqnwp Se Ad Iegd

Condition: excellent (used), Protein cooker direct from Meat-free factory. 6 rack capacity. Lovely condition. Fgedpfxst R Skme Ad Ijd

Condition: new, Catalog number: H0531 – new machine, in stock – tiltable spindle – with side trolley – CE certificate – DTR documentation in Polish TECHNICAL DATA spindle diameter 30mm spindle stroke 100mm max spindle diameter 180mm spindle adjustable at an angle of -5+45 degrees table dimensions 1000x360mm sliding table 1000x250mm Fgsdpey S Aa Rjfx Ad Isd 4 types of speeds 1800, 3000, 6000, 9000 U/min engine power 2.8kW/3.9kW exhaust nozzle diameter 100mm dimensions length/width/height 1150/1155/730mm weight 270kg PRODUCT FEATURES Milling machine lower spindle - table FS 200SF is a massive construction with a table top made of grey cast iron with a high-quality gauge mounted to hold the processing element and high precision of adjustment. The price includes a milling machine with a sliding side carriage. FS 200SF with a tilting spindle is a device with a wide 4-step speed range: 1800/3000/6000/9000 It is successfully used for processing the edges of straight-line elements and for creating decorative strips, grooves, projections, tenons and dovetails The welded steel body and large cast iron table make it a very solid and stable machine, not susceptible to vibration A precise formatting table included Net price: PLN 14,100 Net price: EUR 3,350 Net price calculated according to the exchange rate of PLN 4.2 / EUR (in the event of greater exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7855 Technical specifications: - Spindle diameter: 40mm - Spindle working height: 160mm - Interchangeable spindle - Spindle locking - Height adjustable up/down - Original cast iron fence with full adjustment - 4 spindle speed settings + forward/reverse: 3000, 4500, 6000, 9000 rpm - Table dimensions: 1520x1000mm - Extendable table support - With side carriage for tenoning - Carriage with height adjustment - Electric brake - 3-roller power feed - Number of speeds: 4 - Forward/reverse rotation - Power feed motor: 0.65 kW - Main machine motor: 5.9 kW - Extraction port diameter: 3x120mm - Overall dimensions (L/W/H): 2030x1250x1400mm - Weight: 1100kg Fgodpozdz I Uefx Ad Ijd ADVANTAGES – Made in Poland – Top-mounted control panel – With side carriage for tenoning – 3-roller power feed – DTR technical documentation included – Not repainted – Used spindle moulder, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR Net price calculated at 4.2 PLN/EUR exchange rate (Price may change in case of major exchange rate fluctuations)

Condition: excellent (used), I offer furniture corlettes/warehouse trolleys with the following dimensions: Width x Depth x Height: 2500x1150x1800/2300 Model: Mc-250.713 We also have other trolley sizes available in subsequent listings. Triple stacking capability. 100 mm diameter polyamide wheels, 4 swivel casters, 1 wheel with directional lock. Trolleys are nestable for space-saving storage when empty. The corletta can be used for in-plant material handling and storage of almost all types of goods. Thanks to triple stacking, the full height of the warehouse can be utilized. We offer complete trolley servicing. Fgsdpeyh E Dysfx Ad Ied We provide a 1-year warranty on used trolleys! Delivery available throughout Europe! Djbluvppoxylg Ho Ejkh Your specialist for Corlett sales and service KAM-KUB Logistic&Trolleys Europe.

Condition: used, Linpac 15pcs. transport trolleys for Trolley euroboxes underframe 800x600x200 mm 300kg load capacity RA2210 Technical data: Length: 800 mm Width: 600 mm Height: 200 mm Load capacity: 300 kg for two paralell euroboxes Material: stable plastic body Underride height: approx. 100 mm Weight: approx. 9.1 kg Configuration: 2 steering and 2 fixed castors Purchase quantity 15, stacked L x W x H approx. 800 x 600 x 2270 mm Total weight: approx. 136.5 kg Fodpfotu Rmgox Ad Isgd Year of manufacture: unknown Stackable: yes, through cutouts Condition: Used / fully functional Color: red Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Rollkontener Rollcage mesh trolley for laundry, warehouse - used. A rollcounter is a trolley used for transporting lightweight, bulky products. Rollcages are used for transporting goods by car, as their construction is collapsible. Once the goods have been taken to their destination, the trolleys on the return journey can be folded or nested - putting the trolley one inside the other. Wheels of the mobile roll container: Fgodpfevai Sqox Ad Ied - 2 swivel - 2 non-steering - smooth-running - non-tracking - diameter 13 cm - made of polypropylene Base in container trolley - made of plastic - reinforced by a side beam - Load capacity up to 500 kg. Used roll containers are available off-the-shelf and we are able to organise transport/shipment very quickly. The laundry trolley is sent to the customer assembled. The offer concerns a Rollcontainer / Rollcage / mesh trolley for laundry, warehouse - used: Product code : MTP001097 Technical condition: good Product condition: used Height (cm): 195 Width (cm): 75 Length (cm): 84 Net price : €20.00 each. The offer concerns a Rollkontener / Rollcage / mesh trolley for laundry, warehouse - used: Product code : MTP001096 Technical condition: good Product condition: used Height (cm): 195 Width (cm): 75 Length (cm): 84 Net price : €23.00 each. The offer concerns a Rollkontener / Rollcage / mesh trolley for laundry, warehouse - used: Product code : MTP002883 Technical condition: very good Product condition: used Height (cm): 195 Width (cm): 75 Length (cm): 84 Net price : €30.00 each. The prices quoted apply to wholesale quantities (full truckload) for export outside Poland. Please contact us to discuss the details. Please contact us to check wholesale and retail prices in Poland. * I have large quantities on hand, * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Year of construction: 2026, condition: like new (used), functionality: fully functional, overall weight: 49 kg, total length: 600 mm, total width: 800 mm, total height: 990 mm, machine/vehicle number: 2026, Table Trolley TW 800 Stainless steel table trolley Worktop on top Shelf below Rugged construction Dimensions: 800 x 600 x 990 mm (W x D x H) Mobile with 2 braked castors As new condition Fgsdpfxoy Ac Uco Ad Ijd