Used Traub Tns 30 for sale (90)

Condition: ready for operation (used), Year of construction: 2003, operating hours: 124,706 h, spindle speed (max.): 6,300 rpm, travel distance X-axis: 370 mm, travel distance Z-axis: 250 mm, spindle motor power: 10,700 W, controller manufacturer: TRAUB, controller model: TX8i (64-bit), number of axes: 6, This 6-axis TRAUB TNK 36 was manufactured in 2003. It features a maximum spindle speed of 6,300 rpm and a main spindle bore of 36 mm. The machine is equipped with advanced capabilities such as tool monitoring, rigid tapping, and a high-pressure coolant system. If you are looking to get high-quality turning capabilities, consider the TRAUB TNK 36 horizontal turning machine we have for sale. Contact us for further details. TECHNICAL DATA • MDE Interface: Yes • Tool Monitoring: Yes • Rigid Tapping: Yes (without compensation chuck) • Main Spindle Bore: 36 mm • Main Spindle Drive Power: AC 6.7 / 10.7 kW • Top Turret Stroke X/Z: 50 / 100 mm • Rear Attachment Stroke X: 73 mm • Rear Attachment Stroke Y: ±50 mm • Main Spindle C-Axis: Yes • Hainbuch Change Parts: Yes Tsdpfx Amsza Ucxjyja • Hainbuch Setup Aid Base Body: Yes • Hainbuch Manual Change Device: Yes • Counter Spindle: Motor Spindle • Counter Spindle C-Axis: Yes • Counter Clamping Pressure Device: Yes • Workpiece Ejection Device: Yes • Hainbuch Axfix Chuck: Yes • Upper Tool Carrier: Yes • Electronic Gearbox: Yes • X3 Cross Axis for Front Unit: Yes • Front Unit: 5-position • Driven Tools on Front Unit: Yes • Cut-Off Side Machining Station: Yes • Driven Tools on Cut-Off Side Station: Yes • Workpiece Unloading Device: Gripper • Coolant Tank Capacity: 230 l • Coolant Pressure: 7 bar • Coolant Flow Rate: 50 l/min • Internal Coolant Supply: 30 bar • High Pressure Coolant: 120 bar (front and rear machining station) • Coolant Filter: Knoll VRF 150/750 Vacuum Rotary Filter • Suitable Materials for Filter: Aluminum, Plastic, Brass, Steel • Wash Gun: Yes • Connected Load: 22 kW • Maximum Bar Length: 3 m • Maximum Bar Diameter: 36 mm • Operating Voltage: 400 V, 3~, 50 Hz • Control Voltage: 24 V AC • Valve Voltage: 24 V DC • Clutch Voltage: 24 V DC • Total Installed Power: 33 kW • Total Rated Current: 60 A ADDITIONAL EQUIPMENT OPTIONAL • FMB turbo 5-42 XT / 3200"C" Bar Feeder • Bar Feeder Year: 2003 • Hinged Belt Chip Conveyor • Chip Conveyor Discharge Height: 950 mm • Guide Tubes D25, D36 • Running Workpiece Stop, Shank 16 × 16 mm • Brankamp CMS 100 Collision Monitoring Technical Specification Through-spindle Coolant Yes Counter Spindle Yes Driven Tools Yes

Condition: good (used), Internal item no.: 25088 Tool holder Thread whirling holder incl. cutting inserts Index / Traub No.: 12068219 Todpfx Ajxu Dcvomyja The tool was used on a Traub TNL18 Very well-maintained condition!

Condition: ready for operation (used), Year of construction: 2017, operating hours: 1,749,535 h, functionality: fully functional, machine/vehicle number: 6060449, turning length: 305 mm, spindle speed (max.): 8,000 rpm, turning diameter: 32 mm, spindle bore: 32 mm, overall weight: 8,000 kg, rotational speed (max.): 8,000 rpm, type of input current: three-phase, bar passage: 32 mm, total length: 3,671 mm, total height: 2,650 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, bar diameter (max.): 32 mm, collet bore: 32 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, input voltage: 400 V, power: 36 kW (48.95 HP), travel distance X-axis: 140 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 305 mm, clamping diameter: 32 mm, controller manufacturer: Traub System TX 8i - s V7, Equipment: documentation/manual, The machine is operational and currently in production. All information can be found in the attachment. The machine is available for immediate delivery. The order confirmation with all information about the machine and the loading magazine is included in the attachment. New price: €444,857.70 (gross) The machine was originally used as a demonstration model from 2016 to 2020. Tedpfx Amszc Hmuoyoa Please note the operating hours. The machine will be sold including the FMB LSK38 loading magazine. FMB LSK38 / 3200 "C"

Condition: used, Year of construction: 1988, Technical details: turning diameter over bed: 360 mm turning dia. over face-slide: 160 mm turning length: 800 mm longitudinal traverse (z-axis): 810 mm facing movement (x-axis): 205 mm control: TX-8 spindle passage: 60 mm revolution per minute: 63 - 3150 / 2 step U/min feed:: 10.000 mm/min. tool turret - number of stations: 8 operating hours - idle run: 8834 h tailstock taper ISO: SK30 DIN 2080 tailstock quill stroke: 105 mm operating pressure: 40 bar total power requirement: 38 kW Weight approx.: 3,1 t dimension machine xH: 1,8 x 3,3 x 1,8 m dimensions of hydaulic: 580 x 400 x 750 mm Equipment: Lathe chuck Ø 200 mm, hydraulic Feed force Z-axis = 8 kN and X-axis = 5 kN Coolant system control panel Tjdou Rqabepfx Amyoa Accessories Fine adjustment device for tool set-up *

Condition: used, Year of construction: 1993, Technical details: x-travel: 400 mm y-travel: 300 mm z-travel: 400 mm spindle revolutions per minute : 8000 U/min control: Fanuc OM clamping table: 500x300 mm magazine slots: 16 Stück tool taper: SK40 distance work spindle /surface of the table max.: 50-450 mm numbers of pallets: 2 Stück/part total power requirement: 10 kW weight of the machine ca.: 2,5 t Tjdpsu Idn Hsfx Amyja dimension machine xH: 2,4x1,8x2,5 m transport measurements machine: 2,45x1,8x2,5 m - E-cabinet - cooling device - chip conveyor manufacturer META (conveying height 1500mm; width 200mm) *

Condition: good (used), Year of construction: 1996, CNC turning center TRAUB Type:TNC65 DG Year 1996 Control TRAUB TX8F Todpfxju Eug Ij Amyoa With lots of accessories.

Condition: good (used), functionality: fully functional, 1 x Multi-spindle lathe Traub A 25 Equipment: Boring tool holder Todpfx Ajzcdp Homysa Longitudinal turning attachment Weight-controlled feed Beautiful, complete machine in technically flawless condition. The machine can be inspected while powered on.

Condition: good (used), Year of construction: 2003, CNC turning center TRAUB TNK 36 Year of manufacture: 2003 Control: TX8i (64 bit) Flat screen monitor, 10.4 inches Additional V24 RS232 interface in the control cabinet MDE interface in the control cabinet (machine is running, piece counter) Tool monitoring for thread cutting without compensation chuck Main spindle: Spindle bore 36 mm, maximum speed 6,300 rpm Drive power AC 6.7 / 10.7 kW C-axis Quick-change parts Hainbuch, mounting aid, base body Quick-change device Hainbuch, manual Counter spindle: Tsdpezaud Ajfx Amyoa Counter spindle as a motor spindle with C-axis Device for counter pressure, workpiece ejection device, Axfix chuck Hainbuch Tool holder, top, driven tools, electronic gearbox X3 cross axis for front tool holder, front tool holder, 5-position, driven tools Cut-off station, driven tools Workpiece removal device: Workpiece gripper Gripper jaws D5-8, D8-20, D20-36 Coolant system: Tank 230 l / 7 bar / 50 l/min. Internal coolant supply 30 bar High pressure 120 bar at the front and rear machining stations, vacuum rotary filter Knoll VRF 150/750 (suitable for aluminum, plastic, brass, and steel) Coolant gun Hinged belt chip conveyor, discharge height 950 mm Preparation for installation of bar feeder magazine (guide tube D25, D36) Workpiece stop, rotating (shank 16x16) Collision monitoring Brankamp CMS 100 on main and counter spindle Machine without known defects.

Year of construction: 2003, condition: ready for operation (used), Tool monitoring, thread cutting without compensating chuck, main spindle: spindle bore: 36mm, max. speed: 6300rpm, drive power: AC 6.7/10.7kW, C-axis, Hainbuch change parts, installation aid base body, Hainbuch manual changing device, counter spindle: counter spindle as motor spindle, C-axis, device for counter clamping pressure, workpiece ejector device, Hainbuch Axfix chuck, upper tool carrier, driven tools, electronic gearbox, X3 cross axis for front attachment, 5-position front attachment and cut-off side machining station with driven tools, machine and control cabinet RAL 7037 (dust grey), covers RAL 7035 (light grey), workpiece discharge device: workpiece gripper, gripper jaws D5-8, D8-20, D20-36, coolant lubrication system: tank 230l/7bar/50l/min, internal coolant supply 30bar, high pressure 120bar at the front and rear machining station, Knoll VRF 150/750 vacuum rotary filter (suitable for aluminum, plastic, brass and steel), flushing gun, connected load: 33kW, control system: TX8i (64bit), flat screen 10.4 inch, additional piece counter, V24 RS232 and MDE interface in the control cabinet, operating hours: 124,705h, with FMB TURBO 5-42XT/3200/C bar feeder magazine, chip conveyor, coolant unit and basic equipment of static and driven tool holders. An on-site inspection is possible. Tedpfoy U Nq Ijx Amyoa

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Sliding Head Lathe Manufacturer: Traub Machine Model: TNL 12 Control: Traub Year of manufacture: 2009 TECHNICAL DATA Headstock - Max. bar diameter (mm): 12.7 - Bar stock tolerance (DIN 671) (mm): Ø Xh9 - Max. spindle speed (rpm): 12,000 Max. turning length / headstock stroke - With fixed guide bush (mm): 130 - With rotating guide bush (mm): 80 - With programmable guide bush (mm): 80 C-axis resolution (degrees): 0.001 Rapid traverse Z1 (m/min): 30 Tool carrier 1 - X1 axis travel (mm): 35 - Y1 axis travel (mm): 38 (-10 +28) - Rapid traverse X1/Y1 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool carrier 2 - X2 axis travel (mm): 35 - Z2 axis travel (mm): 50 - Rapid traverse X2/Z2 (m/min): 15 - Chip-to-chip time (s): 0.3 Tool drive for tool carriers 1 and 2 - Max. speed (rpm): 8,000 - Max. number of driven tools: 2xG - Clamping diameter for drilling tools (mm): 0.5–7 Sub-spindle / Front attachment - Max. bar diameter (mm): 12.7 - Max. longitudinal stroke 23, 24 / Xg (mm): 140 / 228 - Rapid traverse 23,24/X3 (m/min): 30 - Tool positions (number): 4 - Max. speed (rpm): 12,000 - C-axis resolution (deg): 0.001 Rear attachment, driven / fixed - Z travel, driven with work spindle (mm): 80 - Tool holder diameter (mm): 20 - Tool positions (number): 3 Rear attachment (X4 axis) - X4 travel (mm): 39 - Rapid traverse speed (m/min): 15 - Tool holder diameter (mm): 28 - Tool positions (number): 4 Tool drive for rear attachment (with X4 axis) - Max. speed (rpm): 10,000 - Max. number of driven tools: 4 - Clamping diameter for drilling tools: - Driven (mm): 0.5–7 - Non-driven (mm): 0.5–10 Coolant system - Single-stage pump pressure (bar): 3 - Tank capacity (l): 180 - Delivery rate (l/min): 40 EQUIPMENT FEATURES - Chip conveyor Tsdpfoy N A S Uex Amyoa - FMB Minimag 18 bar feeder - High-pressure system - Fire suppression system Subject to changes and errors in technical data and specifications.

Condition: good (used), Year of construction: 2002, TRAUB TNL 12/7 CNC sliding headstock automatic lathe TECHNICAL DATA Bar capacity: 12 mm Main headstock strokes: 130 / 80 mm Spindle power: 4 kW Speed, main spindle: 12`000 rpm Upper turret: 6 positions Lower turret: 6 positions Tedpst E Dbyofx Amyoa Number of driven tools, turret: 6 Max diameter, counter spindle: 12 mm Speed, counter spindle: 12`000 rpm Dimensions: 2850 x 1100 x 1480 mm SCOPE OF OFFER U.A: (list not exhaustive): Traub TNL 12/7 CNC lathe Meyrat high-frequency spindles, 2 pieces Tool holders (driven and non-driven) FMB Minimag 3200 C bar loader Hydraulic unit High pressure pump Chip conveyor Exact scope of supply according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Year of construction: 1995, condition: ready for operation (used), Power supply: 75A, connected load: 35kW, control system: Traub SYSTEM TX 8F, weight: approx. 4.5t, operating hours: 84,126h, the machine has problems when machining inclined surfaces. An on-site inspection is possible. Tjdpfxjy Tx Rzo Amysa

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 Tjdpfxoyw H Szj Amysa MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001 degrees SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001 degrees - Travel: 700 mm LEFT UPPER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW RIGHT LOWER TURRET - Number of stations: 10 - Number of live stations: 10 - X/Z-axis travel: 175 / 650 mm - Y-axis travel: +/- 40 mm - Tool type: VDI 30 - Driven tools speed: 6,000 rpm - Driven tools power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg New spindle since 04/26 ACCESSORIES - 3-color status signal lamp - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts extraction - Parts belt conveyor

Condition: good (used), Year of construction: 1975, functionality: fully functional, 1 x Multi-spindle automatic lathe Traub A 15 Tsdpfxey R Nwyj Amysa with loading magazine Iemca AS 325/32 + Drilling and threading unit A well-maintained, complete machine in good technical condition. The machine can be inspected while powered on, or a video can be sent.

Condition: used, Year of construction: 2005, turning diameter 5-42 mm Tsdpfx Ajy Nd U Demyoa turning length 3200 mm control Traub TX8i x-axis 50 mm z-axis 50 mm weight of the machine ca. 4000 kg

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, spindle speed (max.): 8,000 rpm, bar passage: 32 mm, controller model: Traub TX8i-S, number of slots in tool magazine: 12, Equipment: chip conveyor, TECHNICAL DETAILS Tedpjyzxp Tefx Amyoa Bar capacity: 26 / 32 mm Max. main spindle speed: 8,000 rpm Axes: X1 / Y1 / Z1, C-axis integrated in the main spindle Turret: 1 Tool stations: 12 Drive power: 6.7 kW (100% duty cycle) / 10.7 kW (40% duty cycle) Torque: 21 Nm (100% duty cycle) / 32 Nm (40% duty cycle) MACHINE DETAILS Power-on time: 116,721 h Operating hours: approx. 48,000 h Control: Traub TX8i-S DIMENSIONS & WEIGHT Dimensions (L × W × H): approx. 4.4 × 1.4 × 1.7 m Machine weight: approx. 4,000 – 4,200 kg EQUIPMENT Chip conveyor: hinged belt, discharge height approx. 950 mm

Condition: used, functionality: fully functional, Traub automatic lathe Tsdpfxjwcqv Ie Amysa

Year of construction: 2022, condition: used, functionality: fully functional, TRAUB Stone Dry Saw MULTI-STONE 520 MULTI-STONE 520 — Year of manufacture 2022 Used, from the professional rental fleet of Kurt König Baumaschinen GmbH, Einbeck, Germany. Tsdpfx Amjy A E Nieyea Condition & Notes: - Condition: Used, ex-rental, regularly serviced - Functionality: Fully operational - Product photos to follow — please contact us for current images - On-site inspection in 37574 Einbeck available by appointment Price EUR 3,750 plus VAT | EXW Einbeck | Delivery upon request

Condition: ready for operation (used), Year of construction: 2013, operating hours: 55,000 h, spindle speed (max.): 8,000 rpm, overall weight: 7,000 kg, controller manufacturer: TRAUB, controller model: TX8i-s, number of axes: 7, This 7-axis TRAUB TNL 32-7 horizontal turning machine was manufactured in 2013. Ideal for precision turning operations, it offers robust performance and reliability. Consider the opportunity to buy this TRAUB TNL 32-7 horizontal turning machine. Contact us for more information. Additional equipment • Coolant pump 3 bar / Coolant pump 8 bar • Swarf conveyor, hinged belt type H=1000 mm • Linear encoder X-axis for revolver top/bottom • Fabric filtration for coolant: grade of filtration ca. 30-40 µm • High-pressure coolant pump 20 bar • CO2 fire fight system Kraft & Bauer Machine Benefits Technical Machine Benefits • Max bar diameter: 32 mm • Spindle stock stroke: 305 mm • Auto bar loader: fmb lsk38-3200, max. Bar length 3200 mm • Top revolver: x/y/z/h-axis, 10 tools dual drive • Bottom revolver: x/y/z/h-axis, 9 tools same drive; counter spindle independent drive • Conveyor belt for finished parts with gripper Todpfjyrd H Dex Amyja • Machine worked only with cutting oil

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 8,000 rpm, number of axes: 9, This 9-axis TRAUB TNL 32 swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 swiss type turning machine. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber-optic PC; color TFT flat-panel display; electronic handwheel Todpfx Aex D Drcsmysa • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), tapping without compensating chuck, parting tool breakage monitoring, parting tool ejection monitoring, axis shutdown, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bore/bar capacity; C-axis max speed 8,000 rpm • Max stroke: 305 mm (L version) / 127 mm (K version) • Sub-spindle: Partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter-spindle operation • Measuring/feedback: Glass scales on X-axis (upper and lower turrets); rotary encoder on C-axis • Back working: 8-position back table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal device and counter clamping pressure device on main and counter spindles • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: Connection D 150 mm for central extraction Additional equipment • None specified (no robots, bar feeder, chip conveyor, or external automation listed)

Condition: ready for operation (used), functionality: fully functional, Single spindle automatic lathe TRAUB A-15 is in perfect condition, ready for use Max turning diamater 15 mm Todpfx Amoyy Nz Rjyja

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Max. workpiece length (swiss turning): 245 mm Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Sub Spindle Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar Todjyn Imyopfx Amyoa IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: ready for operation (used), Year of construction: 1996, operating hours: 46,282 h, functionality: fully functional, controller model: TX 8F, counter spindle speed (max.): 4,000 rpm, workpiece diameter (max.): 56 mm, Equipment: bar feeder, chip conveyor, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Max. counter-spindle speed: 4,000 rpm Max. workpiece diameter: 56 mm Rapid traverse: max. 15 m/min Fine interpolation cycle: 0.34 ms Maximum thread pitch: 999,999 mm Maximum radius: 99,999.999 mm Feed override: 0–200% Rapid traverse override: 0–100% Spindle speed override: 50–120% Workpiece removal via counter spindle Programming: EIA and ISO code Input/output resolution: X/Z: 0.001 mm, C-axis: 0.001° C-AXIS Main spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 100 Nm Tsdpfxsym A E Io Amyea Accuracy: +/- 3 arcmin Counter spindle: Max. speed: 80 rpm Torque at 100% duty cycle: 30 Nm Accuracy: +/- 3 arcmin Tool Turret 1 & 2 Driven tools per turret: 10 (14) Max. speed: 4,000 (8,000) rpm Power at 100% duty cycle: 1.5 kW Power at 15% duty cycle: 4 kW Torque at 15% duty cycle: 12.4 (4) Nm Number of tool holders per turret: 10 (14) Cylindrical shank as per DIN 69880: Ø 30 x 55 (25 x 48) mm Tool cross-section: 20 x 20 (16 x 16) mm Chip-to-chip time according to VDI 2852: 1.2 s Index time per station: 0.6 s Over 5 stations: 1.5 s Counter spindle (numerically controlled in Z-direction) Max. speed: 4,000 rpm Max. clamping diameter: 65 mm Continuously programmable AC motor: 11 kW Torque: 210 Nm Feed force at 100% duty cycle: 6,000 N Feed travel: 520 mm Ball screw: Ø 32 x 10 mm MACHINE DETAILS Control: TX 8F Operating voltage: 400 V Frequency: 50 Hz Control voltage: 230 V Rated current: 85 A Connection: 54 kW Connected load: 39 kW Noise emission at operator station: 71 dB(A) Hydraulics System pressure: 60 bar Tank capacity: 150 l Coolant Per tool turret: single-stage centrifugal pump Pump pressure: 5/12 bar Tank capacity without chip conveyor: 300 l Tank capacity with chip conveyor: 280 l Dimensions & Weight Dimensions (L x W x H): 11,000 x 2,000 x 2,600 mm Weight: 6,000 kg Read operating hours: 46,282 h EQUIPMENT STAMAG bar feeder Chip conveyor Hainbuch chucking system Two 10-station turrets with driven tool stations Counter spindle External reference: L. Schaible

Condition: used, Year of construction: 1992, turning diameter 480 mm turning length 800 mm control System TX8F Tsdeyuqiwspfx Amyoa turning diameter over slide 240 mm spindle passage 65 mm chuck diameter 200 mm turning speeds 4000 U/min power capacity 30 kW weight of the machine ca. 4,3 t powered tools

Year of construction: 1997, operating hours: 54,646 h, condition: used, Traub TNA500 Serial No. 253 Spindle speed: 2800 rpm Tedpfsyt Slwox Amyoa 12-position tool turret Equipped with driven tools Power: 46 kVA