Used Tos Wh 10 Nc for sale (109,337)

Condition: used, Tenoning spindle 1 St Number of milling agregates 4 St. Spindle diameter 50 mm Control Weinig, PC-Nexus Weinig Unicontrol 10 CNC - Spindles radially and axially CNC-controlled ----- The machine was factory overhauled by Weinig in 2024. The control system was also upgraded to a Siemens S 7 677 C, with a new membrane panel "Touch". With the following machining units: Crosscut saw ----- with laser alignment light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 Axially adjustable via NC axis Radial pneumatic adjustment to 8 positions for edge rounding from above Unit from below for edge rounding ----- Axially adjustable with crosscut saw Tenon and slotting spindle ----- Motor power 15 kW Spindle diameter 50 mm Spindle speed 2,925 rpm Tool travel radius min. 380, max. 400 mm Tool clamping length 640 mm Axially adjustable CNC axis Axially adjustable travel 580 mm Adjustment speed 100 mm/sec. 1. Profile spindle (up- and down-rotation) ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis 2. Profile spindle ----- Motor power 11 kW Spindle diameter 50 mm Spindle speed 6,000 rpm Tool clamping length 400 mm with counter bearing Axially and radially adjustable via CNC axis Iedjxpi Duepfx Affstr Profile milling unit horizontally mounted on top ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 9,000 rpm Pneumatically adjustable to 8 axial and radial positions Profile milling unit vertically mounted on the right side Machine end ----- Motor power 3 kW Spindle diameter 40 mm Spindle speed 5,850 rpm Pneumatic adjustment to 8 axial and radial positions Additional accessories ----- CNC-controlled length stop, mounted on the slotting table for lengths up to 3,500 mm, including a positioned cross-cutting saw integrated into the control system. Studio window device, pivots 60° on both sides Double-part package with automatic separation and transfer Synchronization device with automatic window rebating Rebating carriage for rebating small sash widths Air conditioning unit in the control cabinet PC control NEXUS Automatic turning system Slat conveyor, including conveyor belt for returning the workpieces to the operator (Technical specifications according to the manufacturer - without guarantee).

Condition: new, Year of construction: 2024, neu 2024 7308 prompt, Zwischenverkauf v Italien Iodowiq Idopfx Affjtr 2400 € 1 10 to fix 150 mm 850 mm 520 mm 170 kg With handpump with 2 speeds According to CE regulations User manual

Condition: ready for operation (used), A DMG Automation robot automation cell is available. Interior dimensions X/Y: approx. 700mm/1050mm, max. workpiece weight: 10kg, max. workpiece dimensions X/Y: 150mm/120mm, positioning accuracy: +/-0.1mm, robot axes: 6, robot controller: Kuka KR C 2. Documentation available. On-site inspection is possible. Itsdpfx Afswixzxofer

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, total height: 3,500 mm, total length: 6,000 mm, total width: 3,000 mm, Brewhouse for microbrewery for sale. The brewhouse with three devices is delivered with a platform. The control system (PLC), a Siemens PLC will be built according to your wishes and is included in the price. The brewhouse is equipped with pneumatic valves and is heated with steam. A steam generator can be offered separately. ZKT's and refrigeration equipment as well as additional desired devices and further equipment are available on request. The brewhouse is a trade fair exhibit and was presented by us at the Brau. plus delivery and assembly (if desired) Further accessories can be supplied on request. Iedpfx Aeri Rbweffstr Scope of delivery: - 1x mash tun - 1x lauter tun - 1x combination device wort kettle & whirlpool - 1x plate heat exchanger with two stages (water & coolant) - 1x hop filter - 2x frequency-controlled centrifugal pump.

Condition: ready for operation (used), Various machines from a dental laboratory for the processing of dental restorations are available. 1) Grinding and cutting machine (plaster trimmer) Reco GMT 5330, speed: 1500rpm, grinding wheel diameter: 250mm, bore: approx. 15mm. 2) Dental ceramics furnace Vita Inceramat, max. temperature: 1200°C, firing chamber height: approx. 80mm, machine dimensions X/Y/Z: approx. 500mm/400mm/600mm, weight: approx. 25kg. 3) Model drilling unit Whaledent Pindex P-110. 4) Fine blasting device Renfert Basic Duo, operating pressure: 2bar-6bar, blasting medium containers: 2, mixing principle: Venturi, machine dimensions X/Y/Z: approx. 450mm/400mm/300mm, weight: approx. 10kg. Documentation available. A visit on site is possible. Iodpjxx Ufcsfx Affstr

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, turning diameter: 630 mm, turning length: 2,000 mm, spindle speed (max.): 1,000 rpm, Basic machine version CE version: chuck guard Ø 315 mm with limit switch, front chip guard, rear moveable guard, rod covers Metric version Spindle end Bayonet B8 Spindle bore Ø 71 mm Four-position tool post Electrical equipment for operating voltage 3 x 400 V / 50 Hz Rapid traverse LED lighting Folding handles for X and Z axis Color – RAL 7035/7016 Set of change gears for thread cutting Printed operating manual Isdpfsx Iu Hhox Affstr

Condition: good (used), functionality: fully functional, turning diameter over cross slide: 220 mm, spindle bore: 50 mm, turning diameter: 400 mm, turning diameter over bed slide: 400 mm, turning diameter over top slide: 220 mm, center height: 200 mm, turning length: 1,000 mm, TOS SN 40B Gap Bed Lathe Model: SN 40B Swing over Bed: 400mm Swing over Saddle: 220mm Swing in Gap: 600mm Distance Between Centres: 1000mm Spindle Speeds: 22 – 2000 RPM Spindle Bore: 50.8mm Motor: 5.5 KW Machine with: 3 jaw chuck 4 jaw chuck Quick Change Toolpost Fixed Steady Itedoxxyy Sopfx Affsr

Condition: used, Technical details: clamping surface area: 630x400 mm no. of flutes: 8 rotatability of the table - manual/mechanic: 360 v. Hand ° weight of the machine approx.: 175 kg Angular table - machine table- machine clamping table for milling machine TOS such as FNG or FNGJ The frame is swiveable via hand wheel 360° (scale 360°) T-slots according to DIN 650 and 508 a=14mm; h=24mm; b=25mm; c=9mm foot plate: size 380x300mm with 6 clamping slots WxL=14x20mm Iodpfx Afju Nkrbofjtr *

Condition: good (used), functionality: fully functional, Used TOS SUI 50 - 1500 lathe with extensive accessories for sale Isdewu Dn Iopfx Affjtr For sale: robust and precise TOS SUI 50 - 1500 lathe – ideal for workshops, metalworking, and ambitious hobbyists. 🔹 Distance between centers: 1500 mm 🔹 Swing over bed: 500 mm 🔹 Spindle speed: 14 – 2240 rpm 🔹 Spindle bore: 56 mm 🔹 Dimensions (LxWxH): 3000 x 1300 x 1500 mm 🔹 Weight: approx. 2.9 tons ✅ The machine is used, but in technically good condition and ready for immediate use. 📍 Location: Werdau 📅 Inspection possible – simply arrange an appointment! If you're interested, just get in touch – preferably by message or phone.

Condition: good (used), Well used TOS TRENCIN SUI40-50. lathe Center width 1500 mm Rotation over machine bed 500 mm Rotation over support 320 mm Spindle speed 14 to 2240 rpm Machine is operational and in good condition Ijdpfx Asrwd Hzjffetr

Condition: excellent (used), TOS-TRENCIN SV 18 RA – Lead and Feed Screw Lathe For sale is a lead and feed screw lathe from the manufacturer TOS-TRENCIN, model SV 18 RA. The machine is in perfect condition and comes from the R&D department of a former VEB in Neubrandenburg (never used in production). ——— Technical Specifications • Swing over bed: 360 mm • Swing over cross slide: 215 mm • Turning length: 1,050 mm • Spindle bore: 40 mm • Distance between centers: 900 mm • Speed range: 14–2,800 rpm (21 steps) • Center height: 180 mm • Total connected load: 6.5 kW • Machine weight: approx. 1.9 t • Footprint (L×W×H): approx. 2.9 × 1.0 × 1.2 m ——— The machine is immediately ready for operation. • Inspection possible at any time • Loading and shipping can be arranged without issue ——— Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices are net, plus VAT. Subject to modifications and errors. Itedpfsxk Tyisx Affjr

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, spindle bore: 52 mm, turning diameter: 500 mm, rotational speed (max.): 2,000 rpm, Basic machine version CE configuration: Chuck guard Ø 250 mm with limit switch, front chip guard, rear movable guard, bar guard Metric configuration Spindle end Bajonet B6 Spindle bore Ø 52 mm Four-position tool post Electrical equipment for operating voltage 3 x 400 V / 50 Hz Rapid traverse LED lighting Folding handles for X and Z axes Colour – RAL 7035/7016 Set of change gears for thread cutting Printed operating manual Itjdpfxsx H Sypo Affer Special custom configuration included with the machine 2-axis digital position readout Limat Energy supply to the carriage via cable drag chain Micrometric longitudinal stop for CE configuration

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Fixed setting vice with roller quills for SUI 80 TRENCIN Capacity : 210 - 370 mm 365 - 520 mm Isdou Tvdbepfx Affetr Only available as a set

Condition: like new (used), functionality: fully functional, Extra large steady rest rest for TOS Trencin / TRENS lathes SN50 and SN500. Clamping diameter 110-250 mm. Itjdow Sx Enjpfx Affer

Condition: refurbished (used), Year of construction: 1991, functionality: fully functional, type of input current: three-phase, overall weight: 1,410 kg, input frequency: 50 Hz, nominal power (apparent): 500 kVA, type of output current: three-phase, Equipment: type plate available, 6 months warranty Iodpjwnfx Uefx Affjtr

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 34 63 20 96 006, turning diameter over cross slide: 390 mm, spindle bore: 80 mm, turning diameter over bed slide: 500 mm, spindle speed (max.): 1,800 rpm, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely pickup between 28/07/2025 and 31/07/2025. TECHNICAL DETAILS Swing over bed: 500 mm Swing over support: 390 mm Distance between centers: 1,800 mm Spindle bore: 80 mm Max. speed range: 18 – 1,800 rpm Itodpfewvhxgjx Affsr MACHINE DETAILS Dimensions: 4,000 x 1,800 x 1,900 mm Weight: 5,200 kg EQUIPMENT - SONY digital display - Faceplate (diameter: 500 mm) - 2 steadies

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 215 mm, turning length: 1,250 mm, turning diameter: 380 mm, weight of the machine ca. 1800 kg dimensions of the machine ca. 2,7 x 1,2 x 1 m The lathe is in good condition seccond lathe SV18RA was purchased 10 years ago afte complete refurbish including digital measuring Itjdpfxeu R R I Se Affer accesories uppon request offer valid for 2 machines with complete accesories, including dismantling and loading.

Condition: used, Year of construction: 1991, CNC Machining Center weinig UNICONTROL 10 Location Gorzów Wlkp. Conditions of delivery OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Itjdpfx Afjdm Umlefor Comments Longitudinal saw: 2800 rpm min., 3 kW, power take-off and slot spindle: 5 x 100 mm, 11 kW, 2.800 rpm. min., 1 spindle profiling: 6000 rpm. min., 11 kW, 2. Spindle profiling: 6000 rpm. min, 11 kW. "Angle windows, machining center WEINIG UNICONTROL 10 Number of spindle spindles: 1 Number of spindles molding: 2 Length of the spindle spindle mm: 300 Xrwk8iolx Length of profiled spindle mm: 295 Separate shaft grooves: yes Continuous stroke mm: 100 Spindle diameter mm: 50 Cutting tool cutting wheel mm: 232 Cutting wheel for perforation mm tool: 360 Length of material max mm: 2,600 Equipped for profiling: yes Automatic kontherholz: yes Glaucoma: Yes Workpiece rotation: Roller transport Main engine power kW: 11 Max feed rate m / min: 8 Control: Spindle ON / OFF only Working condition: dismantled / stored "

Condition: reconditioned (used), Year of construction: 2024, functionality: fully functional, grinding wheel diameter: 500 mm, total width: 2,300 mm, total length: 6,730 mm, total height: 1,800 mm, grinding diameter: 320 mm, workpiece weight between centers: 250 g, grinding wheel width: 80 mm, spindle speed (max.): 1,800 rpm, feed length X-axis: 350 mm, feed length Z-axis: 1,550 mm, Good morning, We have to offer a six months old CNC SWG32 x 1500 CNC machine with SIEMENS SINUMERIC 828D sL control (after a complete revitalization of TOS HOSTIVAR BUB32 machine) The machine is still in Lease at ING Lease. The machine has already been partially repaid, our company does not want to recover the repaid installments. The assignment of the lease applies only to the remaining installments to be repaid (the cost of the assignment is borne by our company). For more technical and financial details, I invite you to contact me at the e-mail address or by phone Specification of the machine: - Year of manufacture:2024 - Maximum grinding diameter: 320 - Maximum grinding length: 1500 - Supply voltage: 3 x 400V - Control voltage: 24V - DC Itodpfxjvkc D Io Affor - Metric system - Maximum permissible weight of objects clamped in the canine: 250 kg - Total travel distance in the X axis: 350mm - Rotation of the grinding wheel spindle: 50 - 1500 rpm (7.5kW) - Plunge grinding infeed speed range 0.03 to 20mm/min - Wheel diameter: 500mm - Morse taper 5 - Measuring probe to determine the workpiece - Workpiece support - Electronic wheel (handheld panel)

Year of construction: 2007, condition: ready for operation (used), Main Drive Ijdpfx Ajx Imtasffjtr Number of axis 5 Movement X-Axis Movement 3500 mm Z-Axis Movement 1500 mm Y-Axis Movement 1200 mm This 5-axis TOS Varnsdorf WHN130 was manufactured in 2007. It features a horizontal boring and milling machine with a table size of 1800 × 1800 mm and a spindle diameter of 130 mm. The machine includes a rotary table and is controlled by an NCT-104 system. Consider the opportunity to buy this TOS Varnsdorf WHN130 boring machine. Contact us for more information. Application Types Other Machine Tools

Condition: ready for operation (used), Max. diameter: 320mm Max. working length: 1000mm Itjdpfxjx Iuurs Affsr

Condition: ready for operation (used), Year of construction: 1989, CNC Universal Cylindrical Grinding Machine TOS Model: BUA 25 x 1000 Year of manufacture: 1989 Completely overhauled and equipped with a new control in 2007, has only been operated occasionally since then Swing diameter: 280 mm Maximum grinding diameter: 250 mm Grinding length: 1000 mm Fitted with a new 2-axis CNC Teach-In control KAVALIR K 51/2 Ball screw spindles, axis drives, and measuring systems on both axes Grinding wheel: 400 x 40 x 127 mm Workpiece spindle speed steplessly adjustable from 30 to 150 rpm Grinding wheel speed: 2036 – 2556 rpm Workpiece spindle head swivels 90 degrees Table swivels plus/minus 9 degrees Internal grinding device Flanges Belt filter system Weight: 5 tons Itedox Icb Tspfx Affer Complete set of accessories Price: EUR 7,500.— plus VAT, ex location

Condition: excellent (used), functionality: fully functional, workpiece weight (max.): 300 kg, grinding length: 1,000 mm, grinding diameter: 400 mm, TOS BHU 40/1000 Cylindrical Grinding machine, grinding diameter 400 mm, grinding length 1000 mm, very good technical and visual condition. Technical specifications: Itsdpfx Afsxphdmsfer Grinding diameter: 400 mm Grinding length: 1000 mm Maximum workpiece weight: 300 kg Grinding wheel size: 600 × 150 mm Longitudinal table travel (X-axis): 1–1790 mm Rotating grinding head: ±45° Rotating table: ±5° Spindle taper: Morse 5 Maximum spindle speed: 1240 rpm Total connected power: 22 kVA Machine weight: approx. 6 t

Year of construction: 2008, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model TNC426 Main Drive Spindle speed range 3500 Tool taper 50 ISO Movement X-Axis Movement 1600 mm Y-Axis Movement 920 mm Z-Axis Movement 950 mm Table Outer length 850 mm (extends to 1600 mm with supports) Outer width 850 mm Table load 3000 kg (5000 kg with supports) Media Chip conveyor Yes This 4-axis TOS WFQ 80 CNC boring machine was manufactured in 2008. It features a working spindle diameter of 128 mm, a clamping taper of 50 ISO, and a spindle speed of 3500 rpm. The table can handle loads up to 5000 kg with additional supports and includes a chip conveyor and SIEMENS motors and drives. A great opportunity to buy this TOS WFQ 80 CNC boring machine. Contact us for further details regarding this boring machine. Ijdex D Srwspfx Affjtr Application Types Other Machine Tools

Year of construction: 1990, condition: ready for operation (used), Control Unit Brand HEIDENHAIN Model iTNC 530 Main Drive Spindle speed range 5000 rpm Tool taper ISO 50 Additional Equipment Automatic tool changer: 40 positions Working spindle diameter: 128 mm This 4-axis TOS WFQ80NCA-CNC/50 boring machine was manufactured in 1990. Consider the opportunity to buy this TOS WFQ80NCA-CNC/50 boring machine. Contact us for more information. Application Types Iedpox D R Idefx Affstr Other Machine Tools