Used Tool Room Milling Machine for sale (87,119)

Condition: excellent (used), control: Heidenhain Positip 850; tool taper: SK 40; hydr. clamping; Gtsdpfjlkgvbsx Agbjt stroke: 100 mm; table: 800x480 mm travel: x-600 mm, y-400 mm, z-400 mm rapid motion feed: 63-800 mm/min (18 steps) spindle speed: 63-3150 rpm (18 steps) accessories: coolant equipment, collet chuck incl chucks

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Gtodpfx Aoxftqdogbot Prototrak SMX CNC Control,

Condition: ready for operation (used), Year of construction: 2007, XYZ SMX SLV 3 Axis Turret Milling Machine ProtoTRAK | SMX Control (2007) 3 Axis CNC Capacity (X Axis, Y Axis & Quill) Spindle Taper ISO 40 Spindle speeds to 70 - 3600 RPM Table Size 1473 x 305mm Table Travel: X - 1000mm Y - 410mm Knee Travel: Z - 413mm Quill Travel Z - 127mm Air Power Draw Bar Supplied with a range of spindle tooling Coolant Year of Manufacture: 2007 Gtjdsx Tiq Sjpfx Agbjt Weight: 1850 Kgs Power Requirements: 18A *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79109 Machine Serial Number: 12308 Cost: £14,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Avia FND-32N1 Tool Milling Machine. Please check out our other listings as well. Gtedpfxev R Ipco Agbjt

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 787 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, workpiece weight (max.): 600 kg, The machine is in good technical condition, connected to power and can be tested. Gtedpsxxtmfjfx Agbot

Condition: used, Year of construction: 2004, Technical Data: Travel X/Y/Z: 650 / 500 / 450 mm Clamping surface: 1000 x 600 mm Spindle taper: SK 40 Spindle speed: 6500 rpm Gtodowglapjpfx Agbet Max. table load: 400 kg Number of tool magazine positions: 20 Power supply: 24 kVA Machine weight, approx.: 5500 kg Equipment: - Heidenhain iTNC 530 control - Motor spindle 12000 rpm - 20-position tool changer - Heidenhain tool probe - Heidenhain workpiece probe - Heidenhain handwheel - Menzel minimum quantity lubrication system - Approx. 25 tool holders

Condition: reconditioned (used), feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, Updated Machineseeker description (with travel distances) Deckel FP1 Aktiv – 3 axes – partially overhauled – ready for immediate use Offered for sale is a Deckel FP1 Aktiv in technically inspected and partially overhauled condition. The machine has been professionally refurbished and is in a reliable, operational state. Ideally suited for workshops, toolmaking, training, as well as single part and small batch production. This is not an unchecked used machine but a technically overhauled tool machine with a clearly defined scope of performance and a predictable delivery time. Technical data and features Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Stepless feed on all 3 axes Coolant system Brake motor Fixed angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of refurbishment Workshop tested and partially overhauled Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all existing adjustment options Renewal of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial overhaul provides an optimal compromise between operational reliability, cost-effectiveness, and availability. A complete overhaul of the guideways was not carried out, as there was no technical necessity for this. Scope of delivery Machine loaded free of charge Gtjdpfx Agjx Tdy Isbst Delivery time approx. 12 weeks

Condition: used, Year of construction: 1982, machine/vehicle number: 18613, KUNZMANN universal tool milling machine model UF 6 NR year of manufacture 1982, 2 gear speeds 1400/2800 rpm, table size 860x240mm, 3 T-slots 14mm, spindle mounting SK30, travels: X/Y/Z=450/200/430mm, speeds horizontal: 18 steps from 32-1342 rpm, vertical: 18 steps from 72-2988 rpm, 12 feeds in X-axis, separate coolant tank, chip catcher, machine light, 3 horizontal milling arbors each with cutter, 2 top beam milling arbor bearing blocks, 1 collet element with key. 1 piece machine vice with crank Gtodpfeiqkc Isx Agbst

Condition: new, Year of construction: 2024, functionality: fully functional, - Swiveling control panel - CNC control SIEMENS 828D - Motor for horizontal and vertical spindle - Feed motors with inverter - Ball screws for X/Y/Z axes - Automatic 2-stage gear box for spindle speeds - 1 long milling mandrel 27 mm - 3 reducing sleeves (MK1, MK2, MK3) - Pneumatic hydraulic clamping system for the vertical spindle - Spindle protection with safety switch - Protective cover in the work area with electrically secured doors - Counterholder for horizontal milling - LED work light Gedpfx Ajvupa Rogbett - Automatic central lubrication system - Safety handwheels for X/Y/Z axes - Coolant system with chip tray - Guideway covers - Base plates and adjusting screws - Operating tools - Technical documentation - CE version - Colors: * RAL 7024 - Graphite gray * RAL 7035 - Light gray Technical data: Fixed angle table: - Dimensions of the work surface: 1,000 x 500 mm - T-slots: Number / width x distance: 8 pieces / 14 x 63 mm - Max. table load: 250 kg Vertical table: - Dimensions of the work surface: 1,200 x 250 mm - T-slots: Number / width x distance: 3 pieces / 14 x 63 mm Travel paths: - Axis travel paths: automatic/manual - Longitudinal (X): 600 mm - Transverse (Y): 500 mm - Vertical (Z): 400 mm Feed rates: - Control: stepless - Range (X,Y,Z): 0 – 2,000 mm/min. - Rapid traverse - X,Y,Z axes: 5,000 mm/min. - Rapid traverse - Z axis: 4,000 mm/min. Horizontal spindle: - Tool holder: DIN 2080 / ISO 40 - Speed range (2 levels): 0 – 3,200 rpm. Vertical milling head: - Tool holder: DIN 69871 / / ISO 40 - Speed range (2 levels automatic): 0 – 3,200 rpm - Head swivel: +- 90° - Distance spindle nose/angle table: min/max.: 70 – 470 mm - Distance spindle center to column: min./max.: 160 / 660 mm Motors: Main drive power: 7.00 kW Feed motor power X-Y-Z: 2.85 KW Dimensions and weight Dimensions (W x D x H): 2,850 x 1,950 x 1,900 mm Weight: 1,950 kg

Condition: used, Year of construction: 2000, machine/vehicle number: 5184, Danobat Danocenter NA-750 CNC Turning + Milling Center Godpfoxx Admex Agbett max swing 700mm, X/Y 255/520mm, 12-Pos-Upper-Tool-Turret and 8-Pos-Lower-Tool-Turret with driven tooling, Measuring Head, Tailstock, CNC SIEMENS SINUMERIK 840D, 400V 50Hz 45kW, weight 15to

Condition: used, Year of construction: 2008, We are offering this used Lagun FTV 4 SP tool milling machine, year of manufacture 2008. Gedox Tn S Uspfx Agbett If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1998, operating hours: 17,260 h, Table size: 1000 x 500 mm Tool holder: ISO 40 Travel paths: X-axis: 800 mm Y-axis: 500 mm Z-axis: 420 mm Gtsdpfxsxtu H Nj Agbst Distance between horizontal spindle axis and table: 210 – 630 mm Distance between vertical spindle nose and table: 130 – 550 mm Table load capacity: max. 500 kg Speed range: 50 - 4000 rpm Feed rate (infinitely variable): 5 - 2000 mm/min Rapid traverse in all axes: 8 m/min Vertical milling head, swiveling: ± 90° Manual quill stroke adjustment: 100 mm Drive power: 7.5 kW Dimensions (L x W x H): approx. 3000 x 2400 x 1975 mm Weight: approx. 3000 kg Accessories / Special features: • CNC contouring control HEIDENHAIN TNC 410 • Electronic handwheel HEIDENHAIN HR 410 • SIEMENS AC servo drives • Data interface V 24 / RS 232 • Swiveling vertical milling head ± 90° right & left with 100 mm quill adjustment • Hydraulic tool clamping, vertical & horizontal, ISO 40 • Swivel-away device for the vertical milling head • Very wide speed range up to 4,000 rpm • Vibration-free operation thanks to rigid and heavily ribbed cast iron guideways • Ball screws for X, Y, and Z axes • All electrical control elements on one side, in a movable control panel • Fixed angle table with foldable chip guard • Coolant system integrated in the machine base • Hydraulic unit • Central lubrication • CE compliant Operating hours: 17,256 Spindle hours: 3,816 Image: shows brochure photo Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Godpfxox S Rcmj Agbett

Condition: good (used), Year of construction: 1990, 1 used universal tool milling machine made by Mikron type WF 2 SA year 1990 with Heidenhain active digital readout TNC 114 Stepless feed Lamp Coolant device Travel X / Y / Z 420 / 250 / 345 mm Speed 50 - 2240 rpm Clamping surface 635 x 250 mm Feed in 3 axes 0 - 750 mm/min Rapid traverse in 3 axes 1400 mm/min Holder ISO 40 Vertical / horizontal quill extendable Godpfjrywgzjx Agbjtt Dimensions approx. 1.2 x 1.2 x 1.6 m Weight approx. 1200 kg

Condition: refurbished (used), Year of construction: 1992, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 2 rpm, table length: 900 mm, table width: 530 mm, type of input current: three-phase, total length: 900 mm, total width: 530 mm, rotational speed (max.): 5,000 rpm, rotational speed (min.): 2 rpm, warranty duration: 3 months, working range: 900 mm, year of last overhaul: 2019, Equipment: documentation/manual, rotational speed infinitely variable, We are offering this overhauled Deckel FP 4-60T tool milling machine with Dialog 11 control, year of manufacture 1992. Deckel: FP 4-60T Gtsdox Sv Ubspfx Agbjt Condition: Fully overhauled Tool changer: 24 positions Control: Dialog 11 If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2000, Stanko Universal Tool Milling Machine Model SMK 25/32 TNC355 Low hours – previously used in a school Gtsdpfx Agew D Hmlsbjt Machine No.: 55 Year of manufacture: 2000 Travel X: 400 mm, Y: 320 mm, Z: 440 mm Table size: 800 x 320 mm Spindle taper: ISO 40 Spindle speed: 40 – 2000 rpm Feed rate X, Y, Z axes: 10 – 1000 mm/min, infinitely variable Rapid traverse X, Y, Z axes: 1800 mm/min Quill stroke: 60 mm Spindle motor drive power: 3 kW Electrical connection: 380 Volt, 50 Hz Torque. Horizontal spindle: 230 Nm Vertical spindle: 82 Nm Total power: 5.87 kW Control voltage: 110 Volt Feed drive power: 2.2 kW Feed force: 7500 N Distance horizontal spindle to table clamping surface: Minimum 45 mm Maximum 595 mm Distance vertical spindle to table clamping surface: Minimum 45 mm Maximum 490 mm T-slot width: 14 H 7 mm T-slot spacing: 50 mm Number of T-slots: 5 Equipment: - CNC contouring control Heidenhain TNC 135 - 18 spindle speeds - Fixed angle table - Chip collection tray - Coolant splash guard and chip protection shield - Coolant system - Centralized lubrication - Lighting - Heidenhain control - Electromagnetic clutches for feed transmission - Hydraulic-mechanical axis clamping - Hydraulic tool clamping - Centralized lubrication for guideways and gearbox - Precision ground flat guideways Space requirement (L x W x H): 1685 x 1890 x 1890 mm Weight: 2200 kg Good condition – Ex-school machine Low hours Location: ex-stock 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 1982, functionality: fully functional, Tool milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control: Deckel Dialog Control 4: 3D contouring control, including drilling and milling cycles Monitor, electronic handheld control panel Terminal for program input and output Technical specifications: Travel range X/Y/Z 300 x 220 x 400 mm Speed 31.5 - 3,150 rpm with 21 gear stages Feed rate 4-2,000 mm/min Rapid traverse 4 m/min Drive power 1.6-2.0 kW SK 40 tool holder Hydraulic tool clamping Universal milling table with digital display: Clamping area 600 mm x 320 mm Table load 180 kg C-axis rotation range 360° A-axis tilt range 15°/45° Gtodpfswid Spjx Agbjt B-axis swivel range +/- 45° Vertical milling head: Manual quill stroke - horizontally 65 mm, vertically 60 mm Additional equipment: Manual machine handwheels with scale Direct travel measurement of the NC axes Cooling water system Special accessories: Approx. 33 tool holders (without tools) - see photo High-speed milling spindle Machine data: Machine weight approx. 1,380 kg Space requirement including accessories L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm Power supply: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected with power and chippings by appointment.

Condition: reconditioned (used), functionality: fully functional, Dear Sir or Madam, We hereby offer a Deckel FP1 milling machine, 3-axis active, retrofitted with safety features. These later-generation machines are equipped with, among other things, central lubrication, an electric coolant pump, and a brake motor. Additionally, thanks to Harting connectors, the control cabinet can be quickly and easily disconnected from the machine. The safety components are also connected to the control cabinet via these connectors, ensuring ease of handling is maintained. We provide a 12-month warranty on the retrofitted safety features, which we offer for all machine types! *The electronic spindle guard can be adjusted on multiple axes and is designed to prevent access to the working spindle as well as hazards caused by flying chips, coolant, etc.* *The electronic spindle safety cover is intended to prevent contact with the rotating stub shaft and tool clamping mechanism.* Delivery time: On request Year of manufacture: 1989-1992 Machine number: 2102-xxxx Table: Fixed angle table Travel paths: X300mm/Y160mm/Z340mm Quill stroke: 60mm Connected load: 1.9 kW Number of spindle speeds: 16 Speed range: 40-2000 rpm Tool holder: SK40 Feed: Infinitely variable 5-500 mm/min Rapid traverse: 1200 mm/min Equipment and accessories: including 3-axis digital display with Heidenhain Active Control, coolant system, central lubrication, machine mounts, technical documentation, electronic spindle guard, electronic spindle safety cover Our service promise to you: - We are a certified master craftsman business specializing in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we will fully or partially overhaul the selected machine - Upon request, you can order additional accessories such as tools directly - Upon request, we can install further accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation Gtjdpsx Rvlqjfx Agbst

Condition: ready for operation (used), Year of construction: 1982, feed length X-axis: 700 mm, feed length Y-axis: 490 mm, feed length Z-axis: 250 mm, Heidenhain Visue, 3 axes ISO 40 spindle Gtodpfx Agoxxmpmobet Table 1100x305 mm Travels 700x490x250 mm 7.5 HP Weight 2100 kg

Condition: good (used), Year of construction: 1989, 1 used universal tool milling machine Manufacturer: Mexpol Avia Model: D 36 Year of manufacture: 1989 Technical specifications: Gtsdpfx Agewxy Apsbot Spindle mount: SK 40 X-axis travel: 600 mm Equipped with digital readout.

Condition: refurbished (used), Year of construction: 1982, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 31 rpm, type of input current: three-phase, rotational speed (max.): 6,300 rpm, rotational speed (min.): 31 rpm, warranty duration: 3 months, year of last overhaul: 2020, Equipment: documentation/manual, We are offering this overhauled DECKEL FP 2NC with TNC 320 tool milling machine, year of manufacture 1982. Godpfx Aex Sv Rcjgbstt Manufacturer: DECKEL Model: FP 2NC with TNC 320 Year of manufacture: 1982 Condition: Completely overhauled Control: TNC 320 Machine type: Tool milling machine If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, SZIM MSN-500 Traditional Tool Milling Machine. X movement 700 mm Y movement 450 mm Z movement 500 mm Speed 25 - 3150 f/min Power requirement 15 kVA Machine dimensions 3100 x 2900 x 2100 mm Gedpfx Agov Sk Iqjbjtt Machine weight approx. 3000 kg Good working condition. Please check out our other listings as well.

Condition: repair required (used), Year of construction: 1989, functionality: limited functionality, !!! SPECIAL OFFER!!! For sale are 2 active milling machines of the brand Hermle and the type UWF 801 Price for both machines in a package One machine has an error when moving in Y, the 2nd machine is missing relays. The idea would be to make one machine out of 2. The value of a functional machine would be approx. 10,000 € What makes the machine special is its active control, which allows it to set feeds that stop at a predetermined level. The machine is easy to operate and yet efficient, which makes it ideal for the do-it-yourselfer but also for industry. x-travel: 500 mm y-travel: 430 mm z-travel: 400 mm Spindle holder ISO: SK40 Control: TNC 114 Spindle head swivels left and right: right/left = 90° ° Vertical quill stroke: 80 mm Speed range: 40 - 2000 / 18 step rpm Feed rate:: X+Y: 4 - 1600 steples mm/min Feed rate:: Z: 4 - 1000 steples mm/min Gtsdpot Ifm Nsfx Agbst Rapid traverse: X+Y: 1.6 iand Z: 1 m/min Table size: 800 x 395 mm Spindle drive: 3 kW Weight approx.: 1300 kg Transport dimensions LxWxH: 1.6 x 1.5 x 1.8 m Chip collection tray Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), functionality: fully functional, feed length X-axis: 300 mm, feed length Y-axis: 160 mm, feed length Z-axis: 340 mm, For sale is a conventional milling machine of the brand Deckel and type FP1 The small size of the machine makes it ideal for fast work with a small footprint The machine is fully functional Technical data: x-path 300 mm y-path 160 mm z-path 340 mm Tool holder SK40 Speed 40-2000 rpm Conventional control Table size: 600 x 210 mm Total power requirement 2 kW Machine weight approx. 0.73 t Space requirement approx. 1200x1100x1600 mm Loading and shipping throughout Europe can be organized on request. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Gtsdpfx Agjugv Hvobot Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), feed length X-axis: 400 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, For sale is a conventional milling machine of the brand Deckel and type FP2 Gtedpou Ti Akjfx Agbot The machine is in very good condition, has been overhauled by the Harich company (date unknown) and is ready for immediate use Technical data Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm Speed range: 40 - 2000 rpm Vertical spindle travel: 60 mm Horizontal spindle travel: 100 mm Feed rates: 8 - 400 mm/rev Table size: 700 x 330 mm Motor power: 2.2 kW Connection: 400 V / 16 A plug Weight: approx. 1300 kg Vice and tools are NOT included in the offer, but can be offered. On request, transportation and loading can be organized for an extra charge. can be organized throughout Europe. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website