Used Tilting Table for sale (18,557)

Condition: used, Outfeed table before resaw IDL000793 Bwjdpfx Aeul Rgvjbbjh

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m Bodpfx Abjtddw Aebswh - total width: 1200 mm - height: 950 mm Hydraulic lift, lifting capacity around 1 ton.

Condition: used, Log table with elevator and log scanner Rema Control - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner Bodpfeu Smq Sex Abbswh - log infeed conveyor

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,200 mm, rotational speed (max.): 3,000 rpm, controller model: Heidenhain iTNC 530, The machine underwent a general overhaul in 2011! TECHNICAL DETAILS Travel X-axis: 1,600 mm Travel Y-axis: 1,300 mm Travel Z-axis: 1,200 mm Bodpfx Abjyfpu Tobjwh B-axis: 360° Speed range: 12 - 3,000 rpm Table size: 1,200 mm x 1,000 mm Maximum table load: 12,000 kg Tool holder: SK 50 Tool positions: 54 MACHINE DETAILS Control: Heidenhain iTNC 530 Drive power: 22 kW

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Bwedpfxehwi U Ts Abbeh Total number of drilling spindles: 10 Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007276, Max. panel width: 800 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg Bjdpfxot H Tx De Abbjwh

Condition: good (used), Year of construction: 1992, Machine-Details: Stock-No. 1022-2360 Type of machine Rotary Table Surface Grinding M/C-Horiz. Make ABA Type FRU 800 NC Year of manufacture 1992 Type of control NC Storage location Monheim (Germany) Country of origin Germany Delivery time Immediately Freight basis Ex warehouse, loaded on truck Technical details: workpiece diameter 1000 mm workpiece weight - kg workpiece height - mm grinding wheel motor 11 kW total power requirement 25 kW weight of the machine ca. 6500 kg dimensions of the machine ca. 4100 x 3200 x 2600 mm Additional information Machine comes from a plant closure Equipment: Coolant system 500 liters with paper belt filter Bwjdpfx Aboyhbmyjbsh 4 grinding stones (3 of them unused) Technical data: Rotary table diameter 800 mm Max. distance from rotary table to grinding spindle center 850 mm Grinding wheel diameter 400 mm Grinding wheel width 80 mm

Condition: used, machine/vehicle number: 007278, Max. panel width: 800 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg Bwedpfx Abst H Txqeboh

Condition: used, machine/vehicle number: 006228, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 7 Bwodpfx Abjx Idxtsbeh Total number of tool changer positions: 8

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! manual hight and Stilding adjustment for saw aggregate 0 – 46° digital display for saw blade height and tilting angle motor 5,5 kW saw blade speed 3600/ 4200 U/min. Bwsdpfx Absg Dgr Hjbeh sliding table length 3200 mm angular fence for cutting length up to 3450 mm prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm max. cutting height at 45° = 70 mm working height 880 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Technical Data: saw blade DM mm 550 scoring unit blade DM mm 120 squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 Bwsdpfx Ascrnm Nobbeh saw blade speed RPM 2500, 3500, 5000 scoring unit blade speed RPM 8500 DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 scoring unit motor Hz 50 kW 1,3 cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: new, ALTENDORF Model F45 Pro Drive Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. Pro Drive control: 3,5" color screen with separate keyboard Automatic dimensional correction on the rip fence and angle fence when tilting the saw unit Simple calibration of the axes Machine diagnostics, operating hours counter, USB interface Recall of the last dimension input (back function) 99 storable cutting programs Grooving: with automatic step-by-step positioning of the rip fence 400V / 50Hz - Europe , Scale: scale in mm Electromotive height and tilt adjustment 0 - 46° for the main saw blade with automatic correction of the cutting height when the saw unit is tilted Machine height 910 mm (basic equipment) The control panel of the F 45 is mounted at eye level. This makes it easy to control all axes, and all settings are in view. The one-handed operation of the swing-away device is easily accessible from the working position in front of the machine. Another advantage: nothing stands in your way at the smooth machine front. INCL. OPTIONS: M62003 Template holder M64080 Extended cutting height with saw blade projection of max. 204 mm. M51101 One-sided tilting saw unit with 7.5 kW (10 HP) motor, M24030 2-axis scoring unit with electric motor-driven height and side adjustment M24037 LED lighting for the danger area of the scoring unit M41010 Table top extension 840 mm Bodpfx Aoiz Aufjbbjwh M34204 Double roller carriage, carriage length 3200 mm M44404 Angle miter fence, cutting to length up to 3500 m. M44443 CNC parallel fence, cutting width 1300 mm. M44450 Front support roller. M37003 On/off switch on the sliding table. Note used machines: - Errors in technical specifications and subject to prior sale. - Indicated prices are valid as pickup prices ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are bought as seen without any claim to warranty. The buyer is free to inspect the machines at the site. - Special agreements are only possible in written form. (We answer inquiries only under indication of your address + telephone number!)

Condition: excellent (used), Year of construction: 2000, Saw blade tilting up to 45.5 degrees Cutting height 145 mm max. saw blade diameter 450 mm Cutting width 1250 mm Saw blade speeds 2800/ 4000/ 5500 rpm Motor power 5.5 kW Suction DM - DM 120 mm max. cutting length 3300 mm Dimensions L x W x H = 3300 x 3800 x 1400 mm Weight approx. 1365 kg Generally: parallel fence width adjustment with hand-wheel on the front of the machine Digital display for cutting width Saw blade height and tilting adjustment via foot pedal Scoring unit adjustable by electric motor Length stop on the cross table with digital display retractable parallel stop CE incl. manual Bwsdpfx Aemmb Acebbjh incl. tools Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, machine/vehicle number: 008088, X axis working area: 3700 mm Y axis working area: 2100 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 4 axes Bodpfx Ajx A Hbqsbbowh Total number of drilling spindles: 31 Total number of tool changer positions: 14

Condition: new, galvanized sheet metal dust collection trays fold down side and rear walls - optional rear wall with suction function Working area 2500 x 800 mm Working height 930 mm incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow 5400 m3/h Number of filter cartridges # 4 DM filter cartridges 320 mm Length filter cartridge 600 mm Total filter area 34.8 m2 Noise level 78 dBA Compressed air 5-7 bar Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. Bjdpfx Aeh Ucqtobbjwh • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. height adjustable +/- 15 cm max. weight load 50 kg/ m Bsdpfegvvn Ejx Abbjwh Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2008, BOTTERO 520 LAM-37 - Year 2008 Bsdpfx Abexqyu Tjbewh Cutting table for laminated glass Fixed worktop with flap Air cushion support Max. cutting length: 3700 mm Min. cutting length: 250 mm Thickness: 3-10 mm (monolithic) 2+0.38+2 mm min. (laminated) 8+4.56+8 mm max. (laminated) Speed: 100 m/min Installed power: 15 kW

Condition: new, Work and assembly table Worktop made of solid sheet metal equipped with high-quality workbench (can be removed using screws) Bwodpfjvymfhjx Abboh Easy back-friendly work thanks to height adjustment using a foot pedal Perfectly aligned using the 4 adjustable feet, very easily using an Allen key Continuous height adjustment and 3 fixed working heights Optimal handling thanks to 4 swivel castors with parking brake Regional quality From conviction - 5 year guarantee Load capacity 300 kg Height 400 - 1010 mm Worktop length 1485 mm Worktop 1700 x 790 mm Useful stroke 610 mm Weight 140 kg Front pliers 520 x 70/190 mm (size/span) Side pliers 460x140/145 mm (size/span) Availability: short term Storage location: Flörsheim

Condition: new, Catalog number: H0561 – new machine, in stock – CE certificate – Austrian production – professional – trolley on steel bars TECHNICAL DATA engine power S1 5500W (/750) voltage 400V / 50Hz table height 890mm extraction connector 100mm sliding table 3200x435mm extension table 1200x550mm max. cutting width with gauge 1300mm disc diameter 250-400mm (30) scoring blade diameter 120 x 20 x 3.2-4.2/2.2 mm rotational speed I: 3000; II: 4000; III: 5000 rpm Rotation speed of the scoring saw 8000 rpm Motor power of the scoring saw 750 W Blade tilt 0-45 ° Acoustic power level 90 dB (A) Acoustic pressure level 88.2 dB (A) Overall dimensions of the machine when unfolded L / W / H 3350 x 3600 x 900 mm Shipping dimensions 1350 x 2200 x 1170 mm Net/gross weight 930 / 1110 kg Features: - solid construction - with a large aluminum sliding table and boom, ideal for machining large elements and cutting large, heavy boards to size - cast iron work table (1100 x 700 mm) with table extension (900 x 830 mm) and table extension (610 x 600 mm) with solid steel construction – extension table (1200 x 550 mm) + cutting fence (1950 – 3300 mm) – scoring saw with separate motor – manually adjustable main saw blade angle 0°-45° (using angle indicator) Bwsdoyg Iu Iopfx Abbjh – electric height adjustment of main saw blade and scoring saw Scope of delivery: LEUCO TCT main blade (Ø300 x 30 x 3.2 mm T72) LEUCO scoring saw blade (Ø120 x 20 x 3-3.8 T=2*12ES) Pressure beam – option Net price: PLN 24,300 Net price: EUR 5,750 depending on price EUR 4.20 (Prices may vary with higher fluctuations)

Condition: excellent (used), Year of construction: 2001, overall weight: 10,000 kg, total length: 5,000 mm, total width: 900 mm, total height: 900 mm, Cast iron box table Weight 10 Ton 2 matching pieces availebel Nice surface Number of T slots: 7 Bsdpfx Aoyg Hpwobbewh Jump from T to T: 130mm T size: 22mm Number of T-slotted sides:1 Length: 5000mm Width: 900mm Height: 900mm Weight: 10000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Martin T 75 Prex panel saw German quality product Heavy-duty precision sliding table saw - tiltable on both sides Axis positioning control with 10.4" touchscreen Motor: 9.5 kW Infinitely variable speed control: 2,000 – 6,000 rpm Pre-scoring unit / prepared Maximum cutting height: 204 mm, saw blade diameter 250 - 550 mm Saw blade tiltable from -46° to +46° Height and tilt adjustment via control system Parallelogram crosscut table for double-sided tilting up to 46°, LCD displays, fine adjustment of cut angle to 0.01° Bwjdpfsyg Eybex Abbeh Table length: 3,300 mm Cutting width with parallel fence: 1,100 mm Pneumatically lowerable parallel fence Electromotive positioning of parallel fence via axis positioning control Swiveling control panel above table Continuous rip fence, analog with two fence stops CE-compliant version Year of manufacture: 2021 Machine AS NEW - workshop tested, from lease return Available from stock Lieboch

Condition: used, machine/vehicle number: 007686, X axis working area: 3765 mm Y axis working area: 1560 mm Working Table: Flat table Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 18 Bsdeu Tliyspfx Abbswh Total number of tool changer positions: 12

Condition: used, machine/vehicle number: 005289, X axis working area: 7400 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Bwedowcyacepfx Abbsh Total number of drilling spindles: 10 Total number of tool changer positions: 14

Condition: used, machine/vehicle number: 005947, X axis working area: 2500 mm Y axis working area: 4300 mm Bodex Idw Ajpfx Abbswh Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Total number of tool changer positions: 28

Condition: used, machine/vehicle number: 007601, X axis working area: 4320 mm Y axis working area: 2245 mm Working Table: Flat table Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Bsdpju N Skfofx Abbswh Total number of drilling spindles: 16 Total number of tool changer positions: 8