Used Tilting Table for sale (38,244)

Condition: good (used), Year of construction: 2000, Offer 24510 Technical data: - max. load capacity with horizontal table top 500 kg - Flat plate diameter 850 mm - Through hole / hollow shaft 200 mm - Faceplate motorized left + right swivel 0 - 90 ° Knedpfxjvfc Suo Affjf - Rotation infinitely variable approx. 0.06 - 2.4 1/min - Right + left rotation - E. foot switch for faceplate rotation - E. foot switch for swiveling face plate left + right - Welding current transmission approx. 350 A - Drive 400 V - Table height in horizontal position approx. 850 mm - Space requirement approx. W 1450 x H 850 x D 1000 mm - Weight approx. 900 kg - 4 jaw chucks

Condition: used, Clamping table, sine table, tilting table Tilting clamping table Knedpfjinldpjx Affsf Table length: 1130 mm Table width: 300 mm Table height: 112 mm Tilting angle: 2° Tilting angle max.: 7° - Tilting angle 2° via leadscrew - Max. tilting angle 7° manually lifted to stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg Good condition Clamping plate, ideal for production of wedge strips

Condition: good (used), Year of construction: 2013, Load capacity up to 900 kg Connection: 400V/50Hz Table ready for shipping on transport supports Knsdpfow Sdu Iox Affsf In horizontal position: Length: 6000 mm, Width: 3000 mm, Height: 950 mm.

Year of construction: 1998, condition: good (used), LISEC UKL-35/23VM Glass tilting table With castor rollers With control panel Maximum glass length: 3500 mm Very good and clean condition Kedpfxeqwyx Ss Affenf As is Available immediately

Condition: good (used), Year of construction: 2014, load capacity: 50,000 kg, Manufacturer: BODE Type: VP50H Year of manufacture: 2014 Chuck Table diameter 2940 mm Tilting 0 - 135 Degrees Variomatic rotation Work load at 1000 mm gravity 50 Ton Work load at 1500 mm gravity 32 Ton Work load at 2000 mm gravity 27 Ton Specifications Metric US Standard There are no specifications (yet) for this machine. Dimensions (estimate) Length 6000 mm Width Knodpfjv Dh Uxex Affof 3000 mm Height 3000 mm Weight 19800 kg Please note: The information on this page is believed to be accurate and is provided to the best of our knowledge and belief, and where possible, from the manufacturer. The information is provided in good faith but accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Year of construction: 2022, condition: as good as new (ex-display), Manipulator with hydraulic height adjustment, face plate with clamping slots and manual remote control. Height (face plate horizontal): approx. 532 - 1.132mm Lifting distance/lifting time (hydraulic): approx. s = 600mm, t = 20s Swivel range of face plate: approx. +-300°. Height (Pl.-sch.vertical axis): approx. 709mm Dimensions face plate: Ø1.200mm x 40mm, 6x clamping slots Speed of the main axle: approx. 2.0 rpm (other Torque main axis of rotation: approx. 7,500 Nm Face plate speed: approx. 2.5 rpm Face plate torque: approx. 1,500 Nm Knedpfxsfw Ah Rj Affef

Condition: good (used), Year of construction: 2002, machine/vehicle number: 094-02, Offer 24377 Technical data: - max. load capacity 75 kg - Face plate diameter 500 mm - Spindle shaft passage 100 mm - Face plate swivels 0 - 90 ° - Rotation electr. infinitely variable 1 - 10 rpm - Right + left rotation - E. - Foot switch - Welding current transmission approx. 350 A - Drive 230 V - Table height in horizontal position 870 mm - 3 jaw chucks 300 mm Knjdpfx Afouac Ndofjf - Space requirement approx. W 750 x H 870 x D 500 mm - Weight approx. 150 kg

Condition: like new (used), Glass tilting and transport table TMB Pneumatic Good working order Good condition Kodeizbf Ujpfx Affsnf Available immediately See video

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 7,500 kg, total length: 3,134 mm, total width: 1,738 mm, type of input current: three-phase, rotary table diameter: 1,200 mm, overall weight: 3,000 kg, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable rotary tilting table Maximum load: 7,500 kg Face plate diameter: 1,200 mm Height of faceplate: 900mm-2,084 hydraulic Kedpfx Aot Hfrcsffenf Height of 90° tilted faceplate: 710mm-1,894mm Tilting range: 135° hydraulic Faceplate speed: 0.04-1 rpm electromotive Operation: Manual remote control and two-pedal foot switch

Condition: good (used), Year of construction: 1975, machine/vehicle number: D 201238, Offer 17230 Knsdpfov Hbzkex Affof Technical data: - Load capacity 3600 kg - Faceplate diameter approx. 1050 x 1050 mm - Faceplate motorized, swiveling + rotating - Faceplate speed electrically infinitely adjustable 0.2 - 1 rpm - Motorized right + left rotation - Hand remote control - Welding current transmission 600 A - Drive 400 V - Table height in horizontal position approx. 1450 mm - Space requirement approx. W 1650 x H 1550 x D 2400 mm - Weight approx. 3500 kg - Hand remote control

Year of construction: 1999, condition: excellent (used), Glass tilting and transport table TRIULZI-IG Hydraulic With castor rollers Rollers are moving down for 360 degree glass movement (for sealing) 3600 mm length and 2400 mm working height Good working order Good condition As is Available immediately Knjdpfx Aoiy Dtboffef

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 20,000 kg, total length: 4,750 mm, total width: 2,600 mm, type of input current: three-phase, rotary table diameter: 2,500 mm, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable turn/tilt table Kjdpfx Afet Hgmuefsnf Maximum load: 20,000kg (permitted center of gravity 700mm) Torque: 30.000Nm Face plate diameter: 2,500 mm Height of faceplate: 1,326mm-2,641 hydraulic Height of 90° tilted face plate: 1,045mm-2,360mm Tilting range: 135° hydraulic Faceplate speed: 0.1-2 rpm electromotive Operation: manual remote control

Condition: good (used), Year of construction: 1992, machine/vehicle number: 181192, Offer 24037 Hydraulic welding rotary and tilting table – three axes - welding manipulator Technical data: - max. load capacity 150 kg - faceplate diameter 800 - min. table height in horizontal position approx. 600 mm - max. table height in horizontal position approx. 1100 mm - faceplate can be swiveled or tilted hydraulically - faceplate rotates clockwise and counterclockwise Knjdpfov Hcabex Affof - rotary movement can be controlled electrically hydraulically - welding current transmission approx. 500 A - drive 400 V - connected load approx. 0.75 kW - space requirement approx. W 1700 x H 1450 x D 1000 mm - weight approx. 900 kg

Condition: good (used), Year of construction: 2013, machine/vehicle number: 0370250754, Item 23374 Hydraulic Welding Rotating and Tilting Table – Three-Axis Welding Manipulator Technical Specifications: - Max. load capacity 3000 kg - Faceplate diameter 1000 mm - Min. table height in horizontal position approx. 1070 mm - Max. table height in horizontal position approx. 1970 mm - Faceplate motor-rotatable + swiveling or tilting - Rotation movement electrically continuously adjustable approx. - Right-hand + left-hand rotation Kodpov Rbivofx Affonf - Welding current transmission approx. 700 A - 400 V drive - Connected load 4.0 kW - Hand-held remote control for direction of rotation, swiveling or tilting - Space requirement approx. W 2250 x H 1070 x D 1350 mm - Weight approx. 2000 kg

Year of construction: 1982, condition: used, machine/vehicle number: 391; Lg-Nr. 13100, Technical data: - Load capacity 2000 kg - max lifting capacity horiz. 3500 kp - flat disc turnstile 1750 x 1750 mm - turnstile veraengerungen - Face plate swivels 0 - 90 ° via gear motor - Rotation electrically infinitely variable 0.2 - 1.5 m/min - right - left rotation - Welding current transmission 1200 A - Drive 400 V Knsdpfx Aebp Thhjffsf - Table height in horizontal position with base approx. 2070 mm - Table height in horizontal position without underframe approx. 940 mm - Space requirement approx. W 1650 x H 1130 / 940 x D 2500 mm - Weight approx. 2,2 t

Year of construction: 2002, condition: good (used), machine/vehicle number: 8280, Offer 21463 Kodpfx Afehfwnqofonf Technical data: - max.load capacity 10000 kg - face plates 1400 x 1400 mm - face plate hydr. swivelling 0 - 90 / 135 ° - rotation infinitely variable 0,05 - 1,2 rpm - right - + left rotation controllable - welding current transmission approx. 500 A - drive 400 V - table height at horiz. position approx. 2500 mm - E. manual remote switch - space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg

Year of construction: 2006, condition: good (used), machine/vehicle number: 1607, Offer 22161 Technical data: - Load capacity 100 kg - face plate diameter 400 mm - face plate infinitely variable inclinable - table height at horizontal position approx. 470 mm - rotary movement electr. infinitely variable 0 - 2,5 m/min - welding current transmission 400 A Knodpfxenqzmne Affjf - drive 400 V - right - left rotation - Foot switch with foot roller controller for speed regulation - ground cable - space requirement approx. W 700 x H 700 x D 600 mm - Weight approx. 100 kg

Year of construction: 2006, condition: good (used), machine/vehicle number: 1608, Offer 17231 Technical data: - Load capacity 100 kg - face plate diameter 400 mm - face plate infinitely variable inclinable - table height at horizontal position approx. 470 mm - Rotation electrically infinitely variable 0 - 2.5 m/min - welding current transmission 400 A Ksdpsnqzmcefx Affonf - drive 400 V - right - left rotation - Foot switch with foot roller controller for speed regulation + - right - left rotation - ground cable - Space requirement approx. W 700 x H 700 x D 600 mm - weight approx. 100 kg - mounted on trolley approx. W 700 x H 150 x D 700 mm

Condition: used, Year of construction: 1993, machine/vehicle number: 2410, Order No. 25075 Technical Specifications: - Load capacity 1000 kg - Faceplate diameter 800 mm Knedpfx Afswi H D Isfjf - Motorized tilting faceplate - Continuously adjustable electrical rotation 0 - 250 cm/min - Welding current transmission 650 A - Drive 400 V / 2.8 kW - Table height in horizontal position approx. 1100 mm - Right and left rotation - Space requirement approx. W 1200 x H 1100 x D 1500 mm - Weight approx. 850 kg

Condition: good (used), Year of construction: 1998, machine/vehicle number: A 2409, Offer 24410 Welding turntable and tilting table - three axes - welding positioner Technical data: - max. load capacity 250 kg - Face plate diameter 400 mm - min. Table height in horizontal position approx. 500 mm - Max. table height in horizontal position approx. 800 mm - Working height manually adjustable in 3 steps - Faceplate can be rotated motorized - Faceplate manually swiveling or tilting + height adjustment - Rotation electr. infinitely variable approx. 0.01 - 2.0 rpm - Right + left rotation - Welding current transmission approx. 500 A - Drive 400 V - Connected load 1.5 kW Knodpfxeur Icuj Affof - Manual remote control for speed - E- foot switch - Space requirement approx. W 1100 x H 750 x D 700 mm - Weight approx. 500 kg

Condition: good (used), Year of construction: 2013, machine/vehicle number: 011-113081603, Offer 23370 Technical data: - max. load capacity 50 kg - face plate diameter 340 mm - Spindle shaft diameter 25 mm - Face plate can be swiveled by handwheel 0 - 90 ° - Rotation electr. infinitely variable 0.5 - 3 rpm - Right + left rotation - E. - foot switch - Earth cable - Welding current transmission approx. 350 A - Drive 230 V - Table height in horizontal position 760 mm - Space requirement approx. W 650 x H 760 x D 600 mm - Weight approx. 150 kg Knodpfxoq Ev R Se Affjf

Condition: used, Year of construction: 2000, Lg.no. 24489 Technical data: - Load capacity ( vertical ) 100 kg - Flat plate diameter 400 mm - Passage opening 60 mm - Face plate manually steplessly tiltable 0 - 135 ° - Rotation infinitely variable motorized 0.05 - 5 m/min - E. foot switch for start - stop - Table height in horizontal position without rollers approx. 750 mm - 3 jaw chucks - Drive 220 V Kjdpfou Uqbkex Affsnf - Space requirement approx. W 450 x H 850 x D 650 mm - Weight approx. 60 kg

Condition: good (used), Year of construction: 2005, Offer 25238 Kodswzigcjpfx Affjnf Technical Data: - Max. load capacity with horizontal table top: 350 kg - Max. load capacity in all inclined positions: 300 kg - Faceplate diameter: 400 mm - Through hole / hollow shaft: 125 mm - Faceplate manually tiltable left + right: 0 - 90° - Rotational speed infinitely variable: approx. 0.15 - 5.0 rpm - Right and left-hand rotation - Electric foot switch - Welding current transmission: approx. 350 A - Drive: 400 V - Table height in horizontal position: approx. 900 mm - Required space: approx. W 1150 x H 900 x D 800 mm - Weight: approx. 290 kg - Chuck: 250 mm

Condition: used, tank capacity: 160 l, GENERAL Design: suspended Remarks: Suspended design in a tiltable frame made of V2A; without bottom outlet; top opening diameter approx. 700 mm (tapering towards the bottom; see photos) Total height: 1,100 mm Heating/Cooling: available Top: open with loose lid Stand type: frame Kedpexqduqsfx Affsnf Location: Bremen Nameplate: Volume: 160 liters Product-contacting material: V2A 1.4301 (AISI304) Condition: used HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Outlet: not available MATERIAL SPECIFICATION Temperature system material: V2A 1.4301 (AISI304)

Condition: new, Welding rotary tables increase work flexibility, productivity and quality. Rotary tables also support the welder at work and thus guarantee a safe working environment and better working ergonomics. The main advantage of PEMA rotary tables is that the workpieces can always be set in the best possible welding position. This can increase welding productivity by up to 70 %. Knodpfog Urz Hox Affof 50 years of productive and high quality welding - for half a century we have been designing and manufacturing welding rotary tables for demanding and heavy workpieces. Pemamek welding rotary tables are a combination of modern design and reliable, efficient technology and can be easily integrated with any other PEMA solution. Each of our welding rotary tables is designed in-house and manufactured with high quality components. We have the PEMA representation for Southern Germany. We still have some old generation APS rotary tables in stock. The new generation APSI are already in stock.