Used Tiefbord 8 25 100 for sale (77,466)

Condition: used, Year of construction: 2003, sheet width 3100 mm plate thickness 8.0 mm thickness at "Niro-steel" 6.0 mm down holder 14 Stück no. of strokes 20 Hub/min cutting angle 1.2 ° control ELGO "P9521" work height max. 800 mm oil volume 150 ltr. total power requirement 15.0 kW Hnodsxach Ujpfx Afiju weight 7000 kg range L-W-H 3900 x 2300 x 1600 mm Current new price approx. 40.000 Euro Special price upon request Equipment: - NC electro-hydraulic swing beam shear - ELGO NC control unit "P9521", front left - NC electro-motorized backgauge * Travel range = 5.0 - 1,000 mm (X axis) * On recirculating ball screws * Positioning accuracy 0.1 mm * Travel speed 80.0 mm/sec. - Manual lateral cutting gap adjustment - 1x side stop, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfer units in the front support table - Hinged finger guard with safety switch - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - 1x freely movable foot switch - 2x front emergency stop buttons - Rear safety guard - Operating instructions (PDF)

Condition: used, Outer-Ø: 315 mm Overall height: 70 mm Length of the adjusting screws: 200 mm Hodjbx Eiujpfx Afijnu Thread: M 30 x 2 maximum permissible static load: 11000 kp maximum load in general: 8000 kp

Condition: used, mileage: 658,500 km, power: 184 kW (250.17 HP), first registration: 03/2012, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, loading space width: 2,480 mm, loading space length: 8,000 mm, Equipment: ABS, tail-lift, Internal vehicle no.: 83539A The vehicle is located at our site in 59929 Brilon, Möhnestraße 54. Hedpfx Aewia Tijfisnu Exterior * Sun protection glazing Multimedia * Audio system * On-board computer Comfort and environment * Power steering Safety * ABS * Immobilizer Other * Front power windows * Subject to prior sale and errors excepted. The vehicle description serves only for the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The exact scope of equipment can be obtained from our sales staff. Please contact us. Miscellaneous: This offer is non-binding. Subject to errors and prior sale If a foreign currency is specified, this is done at the current daily exchange rate. The currency of the vehicle location is valid. ----.

Condition: used, functionality: fully functional, mileage: 15,300 km, power: 735.5 kW (1,000.00 HP), first registration: 11/1998, overall weight: 44,000 kg, fuel type: diesel, color: red, axle configuration: 8x8, driver cabin: day cab, gearing type: automatic, Year of construction: 1998, Equipment: all wheel drive, car registration, Airport fire truck, body Ziegler - Z 8, maximum speed 120 km/h - 0 to 100 in 25 s. Water/foam roof monitor, powder front monitor. 11,000-liter water tank - 1,100-liter foam tank. Ziegler pump - MAN pump engine - 311 HP. Special signals. Rapid intervention. Overall length: 12.20 m, height: 3.50 m, width: 2.95 m. Well-maintained - ready for use. Hnjdpfx Aexa Ezwofiju

Condition: excellent (used), Year of construction: 2022, Type: IC 100/25MB Serial number: F2204017 Year of construction: 2022 Product size: max 250 x 235 mm Chamber length: 1100 mm Slice thickness: 0.5 - 500 mm Belt width: 290 mm Compressed air: 6 Bar Power: 3 x 400V, 50Hz, 7.8kW Dimensions: 3550 x 1000 x 1450 mm Hnjdpfx Ajw Nqhcjfiou Weight: 430 kg Semi-automatic slicer with outfeed belt

Condition: used, Year of construction: 1982, Used machine Condition: good Equipment and technical data: Cutting length mm: 3,100 Cutting height mm: 45 Saw blade diameter mm: 180 Hodpow I Ulpefx Afisnu Depth to stop mm: 500 Main motor kW: 1.8 Pneumatic clamp Rear fence Weight approx. kg: 400 Location: Hochheim Availability: short term

Condition: good (used), Year of construction: 2014, High-performance drum chipper Maier / Dieffenbacher. Infeed 1200 x 450 mm. Equipped with 8 feed rollers. Drive motor 200 kW. Feed motors 11 kW. Hydraulic lift and damping of the swing arm. Chip size 30 mm. Includes hydraulic unit, spare parts, and additional rotor. Free loading onto truck. Available only for a short time. Hsdpfxsw Smrij Afienu

Condition: ready for operation (used), Seidel 20K-150/100 Servo amplifier SN: 52-53528L 3x113V 16 kVA,used, good condition, 100% functional, scope of supply according to photos Hnedpfx Afel Ecknoiju

Condition: used, mileage: 658,500 km, power: 184 kW (250.17 HP), first registration: 03/2012, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, loading space width: 2,480 mm, loading space length: 8,000 mm, Equipment: ABS, tail-lift, Internal vehicle no.: 83539A Hnsdpowia Tpefx Afiju The vehicle is located at our site in 59929 Brilon, Möhnestraße 54. Exterior * Sun protection glazing Multimedia * Audio system * On-board computer Comfort and environment * Power steering Safety * ABS * Immobilizer Other * Front power windows * Subject to prior sale and errors excepted. The vehicle description serves only for the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The exact scope of equipment can be obtained from our sales staff. Please contact us. Miscellaneous: This offer is non-binding. Subject to errors and prior sale If a foreign currency is specified, this is done at the current daily exchange rate. The currency of the vehicle location is valid. ----.

Year of construction: 2019, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, operational hours counter: 2169h, with Deduster MHG 1703-2,2 and various accessories. Hnsdpfx Afelubvbjieu

Condition: good (used), Year of construction: 1991, Used Hosokawa MikroPul filter Model Type 8 HP VC 1200-325 Volume 9980l Hedsufy S Hspfx Afisnu Weight 2200kg

Condition: like new (used), functionality: fully functional, planing height: 190 mm, spindle diameter: 50 mm, planing width: 250 mm, overall weight: 10,000 kg, Weinig Hydromat H25N four-sided planer with 100 m/min feeder - German production - hydraulic feed up to 100 m/min - for wet wood - serving table TECHNICAL PARAMETERS: planing width 250 mm planing height 190 mm spindle diameter 50 mm electric height adjustment 1 lower spindle 15 kW 2 right spindle 7.5 kW 3 left spindle 15 kW 4 right spindle 7.5 kW 5 upper spindle 7.5 kW 6 upper spindle 15 kW 7 lower spindle 7.5 kW 8 universal spindle 1800 7.5 kW feed smoothly adjustable up to 100 m/min feed pump motor power 22 kW nine rollers in the table top, three of which are in front of the first head seven upper steel pulling rollers four upper rubber pulling rollers Hnedpfx Afon Slk Uoiju pneumatic pressure jointer on 1-6-7 spindle automatic lubrication of the countertop feeding table 3000 mm speed smoothly adjustable up to 100 m/min two upper pneumatic rollers six lower pulling rollers minimum material length 650 mm Transport dimensions 11000x2400x2000 mm weight 9 tons

Condition: used, No. 04473 Veneer saw Scheer FM 8 - 3100 Used Jointing and fine-cutting machine for joint-tight and splinter-free sawing of veneer, chipboard, blockboard or solid wood Strip cuts are very easy to make Hjdpjw A Actjfx Afienu Rear table is approx. 470 mm wide The clamping beam is operated pneumatically The saw unit is guided by hand Cutting length 3100 mm Cutting height max. 45 mm Motor 1.8 kW Transport dimensions approx. 3800 x 1100 x 1400 mm LWH Weight approx. 400 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: ready for operation (used), Seidel 20K-200/100-B inverter SN: 52-68251 L 3x148V 21 kVA,used, good condition, 100% functional, scope of delivery according to photos Hnodpfx Asl Eck Dofiju

Condition: used, mileage: 658,500 km, power: 184 kW (250.17 HP), first registration: 03/2012, fuel type: diesel, color: blue, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, loading space width: 2,480 mm, loading space length: 8,000 mm, Equipment: ABS, tail-lift, Internal vehicle no.: 83539A Hnodpfxswia Tce Afisu The vehicle is located at our site in 59929 Brilon, Möhnestraße 54. Exterior * Sun protection glazing Multimedia * Audio system * On-board computer Comfort and environment * Power steering Safety * ABS * Immobilizer Other * Front power windows * Subject to prior sale and errors excepted. The vehicle description serves only for the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The exact scope of equipment can be obtained from our sales staff. Please contact us. Miscellaneous: This offer is non-binding. Subject to errors and prior sale If a foreign currency is specified, this is done at the current daily exchange rate. The currency of the vehicle location is valid. ----.

Year of construction: 2012, condition: ready for operation (used), Number of filling stations: 8, throughput: 30 cycles/min, connected load: 6kW, with heated double jacket on the storage container, accessories, filling heads, screw conveyor, conveyor belt and documentation, on-site inspection is possible. Hnodpfxjqygxme Afiju

Condition: used, Name: Filter Press Manufacturer: MSE Type: KFP1000-90/60-25 Year built: 2011 Construction form: Side beam press Filter pressure:: 15 bar Press content: Approx. 1177 liters (expandable to 1766 liters) Cycle: Open Filter area: Approx. 101 m2 (expandable to 152 m2) Plate size: 1000 x 1000 mm Number Plates: 60 (expandable to 90) Plate material: Polypropylene Plate Transport: Automatically Filter cloth washer: No Cake thickness: 25 mm Closing pressure: 350 bar Dimensions: L 7900 x W 1950 x H 2000 mm Empty weight: approx. 1400 kg Technical doc.: Yes Accessories: Drip trays, 25 replacement plates, control cabinet, hydraulic system, light curtain Hnjdpfermmp Ijx Afiou Condition: Second hand Price: On demand

Year of construction: 2009, condition: used, functionality: fully functional, machine/vehicle number: 17590 30, BRUKS Kloeckner Wood Chipping Line Industrial line for processing wood into chips. Includes conveyors, a metal detector, a drum chipper, a control system, power supply, and auxiliary components. Manufactured by: BRUKS Kloeckner (Germany). The line was commissioned in 2010 and has not been operated at full capacity. The plant did not run year-round or 24 hours a day due to insufficient raw material supply. Line Composition: Belt Conveyor BK-CF 1000 Metal Detector BK-MS T Deflector Wall (single-sided, 7 m) Drum Chipper BK-DH 400x1000L - 8 WT Motor Unit 250 kW (incl. pulleys, belts, tensioning device) Scraper Conveyor BK-CS 1000 L Electrical Cabinet and Control System Technical Specifications of the Equipment: 1. Belt Conveyor BK-CF 1000 Center Distance: 15,500 mm Cushioned Loading Zone: 7,000 mm Metal-Free Zone: 2,500 mm Width: 1,000 mm Trough Height: 400 mm Steel Thickness: 10 mm Drive: Via chipper 2. Metal Detector BK-MS T Tunnel design, continuous automatic monitoring with adjustable settings. Includes electrical control, siren (110 dB), signal lamp, integrated oscillator, amplifier, shutdown relay, external acknowledgment button. Paint: RAL 3027 (Crimson Red). 3. Deflector Wall Length: 7 m. Single-sided. Designed for loading material onto the belt conveyor using a dosing conveyor (supplied by the Customer). 4. Drum Chipper BK-DH 400x1000L - 8 WT Chipping Height: 400 mm Chipping Width: 1000 mm Chip Length: 35–40 mm Number of Knives: 2 Feed Speed: 28 m/min Main Motor Power: 250 kW Capacity: 30 m³/h (solid chips) Rotor Diameter: 1300 mm Rotor Speed: 420 rpm Feed Motors: 2×7.5 kW Operating Voltage: 400 V / 50 Hz Control Voltage: 230 V Drive Pulley: For 1500 rpm motor Hydraulics: Shaft lift, cover, pressure adjustment — with hand pump, cylinders, and accumulator 5. Motor Unit 250 kW Consists of adjustable rails, V-belt pulley, V-belt set, protective cover. Main Motor: 250 kW, 400 V, 50 Hz, 1500 rpm, IP54. 6. Scraper Conveyor BK-CS 1000 L Overall Length: 18,450 mm Width: 1000 mm Height: 585 mm Discharge Speed: 25 m/min Belt Limit Load: 14.7 t Drive Power: 7.5 kW Construction: Closed galvanized, with stiffeners, low noise level, flap gate at the drive station Hnodpfxew Ecb Is Afiju 7. Electrical Cabinet and Control System Switching: 250 kW motor start — star/delta; 2×7.5 kW feed motors — direct start with indicator lights; 4 kW pump — direct start, with oil level monitoring; rotor cover protection — category 3; local switches and control sensors for the scraper conveyor.

Condition: used, Year of construction: 1970, machine/vehicle number: Lager-Nr.: 2298, Force: 100 tons Windows: 500mm Daylight: 800mm Distance between columns: 1260mm Table height over floor: 1450mm Table: 1250x1000mm Ram: 1250x1000mm Speed: Down: 400mm/sec. Work: 72mm/sec. Hnedpfjdc Dcqox Afiou Up: 300mm/sec. Stroke: 500mm Die cushion: 40 tons, stroke: 250mm Requested power: 50PS Weight: 22 tons Height: 4500mm Control Siemens S7 Sick light guards Floor standing

Year of construction: 2006, condition: excellent (used), Battenfeld HM 100/525 injection molding machine Year: 2006 Controls: Unilog B4 Technical details Short-circuit force: 1000 kN Size of mold plates (hxv): 680mm x 594mm Distance between columns : 470mm x 420mm Mold opening stroke: 500mm Mold height min: 250mm Maximum clearance : 750 mm Hydraulic ejector - stroke: 150 mm Forward/reverse ejector force: 41.2 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Hedpfxok Rnvms Afisnu Injection volume: 251 cm³ Injection weight , PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1/min Max plasticization rate: 30.4 g/sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Adjustable barrel heating zones: 1+3 Pump power 18.5 kW Oil capacity 275 liters Dimensions and weights Total weight of the machine: 4,600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Condition: used, Year of construction: 2011, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 15.130 kg Lifting capacity: 1.000 kg Working height: 2.300 cm Serial number: 1200022136 Hsdetr Npdspfx Afijnu Transport dimensions (LxWxH): 5.75x2.5x3.2 Please contact PFEIFER GROUP for more information

Year of construction: 2013, condition: ready for operation (used), Clamping force: 250kN, distance between tie bars: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, screw diameter: 25mm, injection volume: 49cm³, injection weight (PS): 45g, injection pressure: 2000bar, cores: 2+5, heating zones: 12, pump hours: 2388h, automatic operation: 1600h. Including Multilift H with B-axis, clean room module. Hedpfxjtyax Ej Afionu

Condition: like new (used), Year of construction: 2011, For sale are 3 cross conveyor assemblies, each consisting of 2 cross conveyors including connectors: Number of strands: 4, clear dimension between the strands 2,400mm Conveyor length: 12,500mm Conveyor height: 500mm Drive: spur gear motor Conveying element: Duplex-Präzi roller chain Conveying direction: forwards/backwards Course: horizontal Carrier distance: without carrier Load in t: 30t - max. 20t can be transported Hnedorfab Rspfx Afisu Discharge: Holders for timber discharge available Optionally, the 6 cross conveyors can also be used individually.

Year of construction: 1993, condition: ready for operation (used), A complete cutting line for sheet metal processing is available. 1) Decoiler Schleicher H-B4-1250, year of manufacture: 1983, power: 11kW, max. load capacity: 12500kg, strip thickness range: 0.5mm-1.25mm, max. strip width: 1100mm. 2) Straightening machine Schleicher RM 8-53/160, year of construction: 1980, power: 7.68kW, strip thickness range: 0.5mm-1.25mm, strip width range: 300mm-1000mm. 3) Trimming shears. 4) HSK HSKW/SF shears, year of manufacture: 1993, max. strip thickness: 1.5mm, max. material width: 1280mm. 5) Stacking line Schleicher, year of manufacture: 1980, max. load capacity: 1000kg, strip width range: 300mm-1000mm, strip thickness range: 0.5mm-1.25mm, feed length range: 200mm-1250mm, power: 1.5kW. On-site inspection is possible. Hnodpjw Az Rpsfx Afisu

Year of construction: 2007, condition: ready for operation (used), Clamping force: 1000kN, tie bar spacing: 470mm/420mm, platen dimensions X/Y/Z: 680mm/590mm, opening stroke: 500mm, daylight: 750mm, ejector stroke: 150mm, ejector force: 41.2kN. Screw diameter: 40mm, L/D ratio: 22, injection volume: 251cm³, injection weight: approx. 228g, injection pressure: 2100bar, injection stroke: 200mm. Machine dimensions X/Y/Z: approx. 4300mm/1500mm/2000mm, weight: approx. 4600kg. Documentation available. An on-site inspection is possible. Hnodow Duvbjpfx Afieu