Used Tiefbord 8 25 100 for sale (77,730)

Condition: used, Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 25 rpm -Power: TA = 8 Nm -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 360/140/H185 mm Guedpoc Uz H Dofx Afijh -Weight: 14.4 kg

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 7,310 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,560 mm, fuel type: electric, mast type: triplex, construction height: 2,235 mm, fork length: 1,600 mm, empty load weight: 5,200 kg, total length: 2,280 mm, drive type: Elektro, construction width: 1,195 mm, Electric 4-Wheel Forklift Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: Triplex Technical Condition: Normal Front Tires Type: Superelastic Front Tires Condition: 60 - 80% Gujdpfxswiazge Afieh Rear Tires Type: Superelastic Rear Tires Condition: 0 - 20% Battery Voltage: 80V Battery Ah: 625Ah Battery Year of Manufacture: 2020 Sideshift, 3rd Valve, 4th Valve, Rear Work Lights, Front Work Lights, Roof Cover, Windshield, Impulse Control, Full Free Lift,

Condition: used, Year of construction: 2018, operating hours: 234 h, functionality: fully functional, fuel type: electric, drive type: Elektro, Scrubber-dryer Gujdpswkk T Aofx Afioh Condition: Ready for use and fully functional Technical condition: Good Description: Battery. Year of manufacture: 2023

Condition: good (used), Insulated, heatable/coolable, cylindroconical, stainless steel fermentation pressure tanks (former beer storage tanks) standing on steel base ring - used - (tank with papers) capacity approx. 100.000 ltr. operating pressure: 1 bar Gsdpfsf Iylyex Afijuh inner diameter approx. 3.900 mm outer diameter with insulation approx. 4.100 mm cyl. height approx. 9.365 mm total height approx. 13.580 mm weight approx. 12,640 kg vessel with upper cone bottom and lower cone Vessel shell and cone provided with cooling zones. Cooling zones jacket designed for 0.4 bar Cooling zones cone designed for 0.5 bar Complete vessel approx. 100 mm foamed with PU foam, with galvanized, screwed cover plate (plate may have to be replaced) Connections: on top bottom in the middle: 1 flanged connection piece NW 500 with pulled-down CIP line DN 80 1 venting spigot DN 200 on the jacket: Connection flanges NW 50 for coolant inlet and coolant outlet at the cone: 1 manhole 450 x 350 mm Cone tip ends in an outlet connection DN 100 otherwise according to drawing + photos

Condition: good (used), Year of construction: 2002, Edge banding machine with Fuegefraesen otherwise fully equipped PU glue is suitable Guedpfxogmn H As Afish

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 773, paper width (max.): 260 mm, 8-Color Semi-Rotary UV Offset Gusdpfx Ajwbhtbjfioh TECHNICAL DETAILS Printing process: Semi-rotary waterless offset for labels, PVC, and films Inking units: 8 (with UV) Print type: 4+4 UV offset Print width: max. 260 mm Print format: max. 250 mm Speed: 50–180 Material flow Material feed: Roll to roll Unwind unit: included Rewind unit: included EQUIPMENT - Unwind unit - Rewind unit - UV drying

Condition: used, Year of construction: 2018, operating hours: 47 h, functionality: fully functional, fuel type: electric, drive type: Elektro, Scrubber-dryer Condition: Ready for use and fully functional Gjdpfx Aewkk Tvsfieuh Technical condition: Good

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA track width 250mm shaft width 220mm max. disc diameter 300mm disc hole diameter 60mm cutting height 100mm table width 650mm table length 1460mm - from above: 2 rows of pawls smooth sliding shaft shaft with saws smooth, sliding shaft - from below: guide pawls caterpillar 2 types of feed speed + smooth central lubrication feed motor 1.2kW main motor 21kW extraction nozzle diameter 180mm overall dimensions L/W/H 1700x1450x1500mm weight approx. 1800kg – Italian production – DTR documentation – solid machine Godpfxsvxu Ale Afijuh – used multisaw, very good condition Net price: PLN 25,900 Net price: EUR 6,100 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Professional digital micrometer from the renowned brand Mahr – model Micromar 40 EWR(i) – designed for extremely precise measurements with accuracy up to 0.001 mm. The device in IP65 version is resistant to dust and water, making it ideal for applications in metrology, quality control, and industrial workshops. . Measuring range: 100 – 125 mm . Accuracy: 0.001 mm . Digital readout with large, easy-to-read LCD display . Protection rating: IP65 – resistant to dust and splashes . “ABS” and “Hold” functions – quick measurement hold and zeroing function . High-stiffness frame, ergonomic grip . Includes original box, certificate, user manual, and 100 mm calibration standard . Condition: virtually new / only used for testing Gjdpfoxl Rgisx Afieuh

Condition: refurbished (used), Year of construction: 2016, functionality: fully functional, total width: 25,000 mm, total length: 100,000 mm, total height: 12,500 mm, Lightweight hall (steel structure) 25 m wide, 100 m long, and 12 m high; in very good condition with the steel structure ready for immediate assembly; hall is offered complete with tarpaulin and assembly parts; snow load 200 kg/m² and wind load 0.3 KN/m²; loading and delivery can be organized; assembly and tarpaulin installation or a new tarpaulin can be organized. Gujdpfxev Iltae Afieh

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Guedpfx Afswbp Ersieh Fabo tracked jaw crusher FTJ 11-60 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrating grizzly feeder, 1000 x 600 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 100-250 tph. Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-60 -Production Capacity: 100 – 250 tons per hour -Maximum Feeding: 550 mm -Crusher Type: Jaw Crusher -SIZE: 1000x600 mm -Generator: 275 kva -CSS Setting: 40 – 150 mm -Weight: 40 tons – Low investment and operation cost – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: good (used), 25 running meters tire rack Used, very good condition, see pictures height 2,5 m depth 50 cm, field load 9000 kg beam length 2,1 m Beam with superimposed load / compartment 1000 kg Negotiable price: € 1.950,-- net ex stock Offer consists of: + 12 pcs. frames pre-assembled, 9t field load, depth 50 cm, height 2,5 m + 66 pcs. beams, length 2,1 m, 1000 kg payload/slot + 132 pcs. suspension locks + 24 pcs. concrete anchors Load plates Other composition on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various areas broom-clean business clearances company liquidations Gjdpefdik Iofx Afiouh Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Hib Akzent 1000 Model T1060-8 Welding Tongs Control Very good used condition, fully functional. Item location: 75053 Gondelsheim See pictures Gusdpfxsxmuzmj Afijh Shipping by freight carrier or collection

Condition: new, Technical data for the pallet racking traverse: Racking system: Stow Type: Pal Rack NS The scope of delivery includes: 01x pallet rack traverse, new Material color: Ral 2004 orange Box profile: 100 x 50 mm Beam type: PNB 0480 Bracket: 4 HK (hooks) Weight per unit: approx. 7.21 kg Clear width: approx. 1,825 mm Max. load per pair of traverses 2,000 kg with evenly distributed load 02x locking pins, new Version: completely galvanized For securing the longitudinal beams against unintentional lifting Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Godpfx Afor Tk Sgjisuh Mr.: Falk Deutsch General information about the article: This item is only offered for collection. Any additional transportation or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: used, Year of construction: 1900, functionality: fully functional, volume flow: 6,600 m³/h, final pressure: 2.5 bar, power: 610 kW (829.37 HP), input voltage: 6,600 V, input current: 69 A, type of input current: AC, 2 pieces of cooling water pumps. Vertical column pipe pumps with open screw impeller Manufacturer: KSB Type: SEZ N 8-60 Impeller design: Open screw impeller Number of impellers: 1 Immersion depth: 2550 mm Shaft seal: Mechanical seal Guodpfjxb Tvxex Afish Radial bearing: RESIDUR fiber ceramic Support bearing: Segment slide bearing Cooling: Self-cooling with CuNiFe cooler Speeds: 745 / 600 / 496 rpm Flow rate: 6600 / 5750 / 4750 m³/h Delivery head: 25 / 15.5 / 10.5 meters Shaft power: 525 kW / 280 kW / 180 kW Pump efficiency: 85.7% Pumped medium temperature: 20°C NPSH: 8.0 m Casing: S235JRG2 Shaft: 1.4313 Impeller: 1.4409 Impeller diameter: 766 / 571 mm Electric motor: Siemens 1LA44548 AW94Z Power: 610 kW Voltage: 6600 Volt Current: 69 Ampere Including frequency converter Dimensions: Discharge nozzle: DN 800 Pressure rating: PN 10 Pump weight without motor: 4100 kg Length with motor: 7723 mm

Condition: new, Technical data for the pallet rack traverse: Shelving system: Mecalux The scope of delivery includes: 01x pallet rack traverse, new Material color: RAL 2001 orange Traverse type: TB-S 100 Box profile: 100 x 50 mm Agraffe: 4 HK (hooks) Clear width: 1,825 mm Max. load per pair of traverses 2,000 kg, with evenly distributed load 02x integrated locking pin, new To secure the longitudinal beams Guodpfxjvvifpe Afish against accidental lifting Currently available in stock: approx. 404 pieces Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the article: This article is only available for collection. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 2003, machine/vehicle number: 0-202-07-6152, Homag Optimat KFL525/8/A3/15 Double Sided Edge Bander (2003) Gujdpfx Afexny Ubsioh

Condition: used, functionality: fully functional, Tires, wheels and rims Condition: Ready for use and fully functional Technical condition: New Front tires type: Superelastic Front tires size: 48.5x14-24 Description: Superelastic tires MonoMatic: 48.5x14-24 RIM 11.25 (355/85-24) Godpfx Aou Dzvtsfisuh

Year of construction: 2004, condition: used, Manufacturer: Gerteis Model: GMP-Polygran Macro Pactor 250/100/3 Gjdpjvly Iysfx Afiouh Year: 2004 Type: Roller compactor, granulation unit for the pharmaceutical industry. Feed screw Stamping screw Compaction zone with pressure rollers Granulation zone with star rotor and screen Force: 1 – 20 KN/cm Gap width: 1.0 – 6.0 mm Pressure roller speed: 1 – 30 rpm Roller diameter: 250 mm Roller width: 100 mm Capacity: 60 – 400 Kg/H (normal value: 200 Kg/h) Equipment dismantled and stored. Complete electrical and technical technical file + program backup available. Electrical, safety control cabinet not available . These items may be the subject of a separate quote.

Condition: used, Year of construction: 2012, x-travel 2500 mm y-travel 620 mm z-travel 520 mm control Siemens 840 D Shop Mill table surface area 3000 x 600 mm rapid traverse 45 m/min turning speed range 18000 U/min power capacity - milling spindle 13,7 kW tool taper HSK 63 A | no. of tools in the magazine 30 Stück weight of the machine ca. 9,0 t dimensions 8,3 x 4,2 x 3,6 m Gujdpfxsw Np A Sj Afish Vertical Machining Center traveling coloumn - chipconveyor - external handwheel - 3D- touch probe - internal coolant 80 bar - band filter system - electr. roof - 1x oil dust collector

Condition: excellent (used), CATALOGUE NUMBER 7751 TECHNICAL SPECIFICATIONS - Track width: 250 mm - Shaft working width: 250 mm - Max. blade diameter: 300 mm - Blade bore diameter: 60 mm - Max. cutting height: 100 mm - Table width with extension: 520 mm - Table length: 1580 mm *From above: - 2 rows of pawls - Metal pressure roller, sliding - Shaft with saw blades - Smooth metal sliding roller *From below: - Sliding roller - Guide rail - Pawls - Track - Central lubrication for track - Stepless feed speed adjustment - Feed motor: 0.75 kW - Main motor: 15 kW - Extraction nozzle diameter: 200 mm - Overall dimensions (LxWxH): 1640x1400x1550 mm - Weight: 1000 kg ADVANTAGES Gedsxft Dwepfx Afieuh – Italian production – Very good condition – Used multi-blade saw Net price: 32,900 PLN Net price: 7,740 EUR Net price calculated at an exchange rate of 4.25 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2020, operating hours: 8,052 h, functionality: fully functional, travel distance X-axis: 1,875 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,345 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed length X-axis: 1,875 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 1,345 mm, feed rate X-axis: 24,000 m/min, feed rate Y-axis: 24,000 m/min, feed rate Z-axis: 24,000 m/min, torque: 3,430 Nm, workpiece weight (max.): 4,000 kg, total height: 4,950 mm, total length: 7,029 mm, total width: 5,200 mm, rotational speed (min.): 10 rpm, rotational speed (max.): 10,000 rpm, overall weight: 51,200 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 500 rpm, distance table center to spindle nose: 1,600 mm, spindle motor power: 37,000 W, spindle nose: A2-11, tool length: 300 mm, type of input current: AC, turning diameter: 1,450 mm, turning diameter over cross slide: 1,250 mm, spindle diameter: 160 mm, bar passage: 160 mm, chuck outer diameter: 500 mm, collet bore: 160 mm, feed force X-axis: 20,000 N, feed force Y-axis: 20,000 N, feed force Z-axis: 25,000 N, milling spindle length: 300 mm, quill diameter: 160 mm, quill stroke: 250 mm, quill travel distance: 250 mm, spindle bore: 160 mm, swing diameter over bed slide: 1,450 mm, swing diameter over cross slide: 1,250 mm, swing diameter over top slide: 1,100 mm, turning diameter over bed slide: 1,300 mm, turning length: 1,600 mm, Equipment: chip conveyor, documentation/manual, For sale: Mazak Integrex e-1250 V/8 mill-turn center complete with extensive accessories and a Mazak Palletech High Rise (800B) automation system. The system combines milling, turning, and automated pallet handling – ideal for complex workpieces in a single setup. _____ Technical Specifications – Integrex e-1250 V/8 • Travel: X = 1,875 mm, Y = 1,250 mm, Z = 1,345 mm • Rotary table: Ø 800 mm, 500 rpm • Tool magazine: 120 positions (CAPTO) • Control: Mazak SmoothX with 5-axis functionality • Operations: Milling, turning, drilling, tapping, 5-axis simultaneous machining • Coolant system: High-pressure system up to 70 bar, Mayfran belt filter system, oil separator, coolant guns • Accessories: Tool Eye, Renishaw touch probe, HD camera system, overload monitoring _____ Software & Control Package • Synchronous tapping (G84.2 / G84.3) • Engraving and re-cutting functions • Cylindrical & polar interpolation (EIA) • Tool length & radius compensation (5-axis) • Fine spline interpolation (EIA) • Mazatrol turning/milling function • MT Connect adapter for networking _____ Automation – Palletech High Rise (800B) • Pallet transport system (mixed type) • Expandable high-bay racking solution for flexible manufacturing • Ideal for both series and mixed production • Note: Pallets to be procured separately _____ Special Features • Complete documentation (digital & print) • Full package: machine + automation + accessories _____ Your Advantage • “Done in One®” concept: all machining in a single setup Gjdpfx Ajxgu E Eofiouh • Productivity: 5-axis machining + turning + pallet automation • Flexibility: From single parts to series production • Efficiency: Automatic pallet change & integrated measurement technology 📍 Location: Southern Germany 👉 Price and delivery terms upon request

Condition: used, Year of construction: 1982, plate thickness 8 mm blade length 250 mm angle adjustable from - to fest table surface area 840 x 750 mm total power requirement 3,0 kW weight of the machine ca. 1,3 t dimensions 1,4 x 1,1 x 1,5 m Hydraulic notching machine Gjdpfx Aevki Hiefieuh - Footswitch - 2 pcs. sheet metal stop

Condition: used, Year of construction: 1992, functionality: fully functional, installation height: 700 mm, pressing force: 250 t, table width: 1,250 mm, table length: 1,150 mm, die cushion stroke: 150 mm, stroke length: 400 mm, Hydraulic double column press DUNKES HDS 250/10 Year of construction 1992 Technical data: Pressing force at 260 bar: 250 tons Rapid lowering speed: 365 mm/s Table clamping area approx.: 1150 x 1250 mm Ram clamping area approx.: 1150 x 1250 mm Die cushion area approx.: 800 x 1000 mm Die cushion pressing force (200 bar): 100t Die cushion stroke: 150mm Power requirement: 45 kw Installation height: 700 mm ram stroke: 400 mm Gujdpfxoup Si He Afioh Conversion of the control system to SIEMENS (in 2005) Machine height approx. 5,400 mm TP language currently Polish

Condition: excellent (used), CTS Type: TSS-70/130 CTS water-cooled temperature shock test chamber Type series TSS -70/130 Test chamber volume 130 liters Test chamber dimensions: Height, approx. 410 mm Width, approx. 480 mm Depth, approx. 660 mm External dimensions: Height, approx. 1820 mm Width, approx. 940 mm Depth, approx. 2335 mm Temperature operating range: Temperature range in °C : Hot chamber +50/+250°C Cold chamber -80/+100°C Retempering of ICs < 15 min in kg 10.0 Car changeover time in sec. < 10 Max. test weight in kg 50 Temperature constancy over time in K ± 1 Electrical connection 400 V +6% -10%, 3/N, 50 Hz Gusdpfx Aetql H Aefijh Connected load in kW approx. 16.6 Condenser chiller water-cooled Test chamber weight in kg approx. 950 Sound pressure level in dB(A) < 60 Feed-through Ø in mm 125 Refrigerant: R404A/R23 Weight: 950 kg The following information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. functional check and replacement of necessary components 2. if necessary, new filling with legally compliant refrigerant 3. leak test with certificate 4. after successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.