Scrubber/dryers

Dulevo RO 25-100

Condition: used, Year of construction: 2018, operating hours: 234 h, functionality: fully functional, fuel type: electric, drive type: Elektro, Scrubber-dryer Condition: Ready for use and fully functional Technical condition: Good Hnsdpfowkk T Ajx Aitsu Description: Battery. Year of manufacture: 2023

Condition: used, operating hours: 10,420 h, functionality: fully functional, machine/vehicle number: ES2234, mileage: 74,155 km, power: 75 kW (101.97 HP), first registration: 05/2016, overall weight: 4,900 kg, fuel type: diesel, color: white, axle configuration: 4x2, maximum load weight: 1,900 kg, empty load weight: 3,000 kg, next inspection (TÜV): 01/2027, fuel: diesel, driver cabin: day cab, gearing type: hydrostat, emission class: euro5, Equipment: hydraulics, low noise, soot filter, * Hako Citymaster 2000 vacuum sweeper * from first ownership / former municipal vehicle * Approved as a self-propelled work machine 50 km/h (sticker exempt) * On request, the major engine inspection with timing belt, water pump, oil and filters can be carried out by us free of charge upon sale * New disc brushes * Low emission Euro 5 * 7299 working hours * 10420 total operating hours * 74155 kilometers * VW 2.0 TDI industrial engine (4 cylinders) * Diesel particulate filter * Reversing camera Hodpfxjmnp Afj Aitsnu * Switchable all-wheel steering * Sweeping width adjustable from 140 cm to 260 cm * Water pumps for fresh and circulating water * 350 liter fresh water tank * Tiltable stainless steel debris container * ISRI swing seat driver * Yellow rotating beacon * Ready to use condition --- We sell exclusively for our own and under exclusion of any warranty. Errors, changes and prior sale reserved --- * We are there for you Monday - Friday from 9.00 - 17.00, Saturday by appointment, outside these opening hours appointments can be made by telephone. * We will be happy to trade in your current used appliance/vehicle. * Sales to tradesmen and exporters are given preferential treatment, this applies to our entire vehicle stock. * The above information is non-binding, subject to errors, changes and prior sale!

Year of construction: 2015, operating hours: 715 h, condition: good (used), KÄRCHER B 150 R with R head (cylinder brush scrubbing deck) Ride-on scrubber-dryer This KÄRCHER B150R was manufactured in 2015 and has only 715 total operating hours. It is in good overall condition with the usual signs of wear and tear. Comparable to a new price of €19,000! The price is plus 19% VAT! - Inspection/test drive is possible at any time. Hsdpfoivt Hbex Aitenu - Nationwide shipping can be arranged; the costs depend on the distance.

Condition: used, Year of construction: 2025, operating hours: 21 h, functionality: fully functional, Powerful ride-on scrubber dryers in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 21 hours Year of manufacture: 2025 SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBER Efficient floor cleaning combined with extremely easy handling. Restore the shine to your hall! The fully electric ride-on scrubber dryer from SCHORR makes cleaning large hall areas much easier, especially due to the machine's excellent maneuverability. The steering angle is 90°, so pillars or narrow spaces, for example, are no problem. No special training is required to operate the machine. Simply fill it, get on, and drive off. With the built-in 100Ah batteries, intensive continuous use of approximately 4 hours is possible. The batteries are conveniently charged using the included charger at a standard 230V household outlet. SCHORR SCRUBBER DRYER RR1030FS – DISCOVER THE BENEFITS: -- Fully electric scrubber dryer with a 1030mm working width – ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80-liter fresh water tank and 85-liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical Specifications Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR1030FS Drive: Seated Suction motor power: 500W Brush motor power: 500W Drive motor power: 500W Operating time: approx. 4 hours Hodpfx Aijwh Ri Estjnu Number of wheels: 3 Tires: PU (non-slip) Weight: 250kg Basic dimensions Volume Fresh water tank: 80L Dirty water tank volume: 85L Brush diameter: 510mm Overall length: 1400mm Overall width: 1030mm Overall height: 1100mm *Further technical specifications are available upon request. The ride-on scrubber-dryer is designed to be user-friendly, making the cleaning process as straightforward as possible. The intuitive control panel allows for easy control of all functions, so even inexperienced users can quickly get to grips with it. The ergonomic seat and clear view of the cleaning area allow you to work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure long cleaning intervals without the need for frequent refilling or emptying. The machine is easy to maneuver and ideal for use in large areas. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. We at SCHORR are happy to answer any questions you may have about our ride-on scrubber-dryer. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your needs.

Condition: new, Year of construction: 2024, functionality: fully functional, nominal power: 90 kW (122.37 HP), rotational speed (max.): 5,760 rpm, rotational speed (min.): 1,592 rpm, total height: 3,437 mm, total length: 3,275 mm, total width: 2,500 mm, type of cooling: air, compressed air connection: 6 bar, Equipment: rotational speed infinitely variable, The impact mills of the REKORD 212-630 series in the welded housing design are robust universal mills for demanding industrial applications in continuous operation. ● Size: 630 mm (nominal rotor diameter) ● Mill housing: Heavy-duty welded stainless steel housing, pressure surge resistant up to 10 bar (AISI316L), with product-contacting surface finish Ra ≤ 1.6 μm for easy cleaning, equipped with a pivoting door and safety interlock type HAAKE (key transfer system); monitoring of housing and bearing temperature, vibration monitoring ● Mill inlet: JACOB pipe; DN 150 mm ● Mill outlet: Ground material and air discharge downward into a suction hopper, optimized for connection to the conveying line to the total separator ● Mill drive: Belt drive, three-phase motor, energy efficiency class IE3 (manufacturer SIEMENS), 90 kW, 3~ 400 V, IP55; suitable for operation with frequency inverter ● Sealing materials: Silicone; PTFE, sealing material conforms to EU and FDA food hygiene standards ● Grinding elements: Pin rotor: 4 pin rows, pin Ø 7 mm (wear-reduced); Pin stator: 3 pin rows without external pin circle, pin Ø 7 mm ● Bearings: Designed for toughest operational demands in continuous industrial service, heavy-duty bearing housings with temperature and vibration monitoring (early detection of potential bearing failure and avoidance of hot surfaces) ● Inert gas supply/monitoring for shaft seal on product chamber side ● Run monitoring to detect operating faults ● Machine frame: The complete unit – mill, drive with motor, tensioning rails, belt drive, and belt guard – is installed ready for use on a sturdy machine frame with height-adjustable machine feet Main components of the offered system include: ● Product feed/transfer from customer’s upstream process and transfer to a rotary valve (certified ATEX protection system); ● Industrial pin mill type REKORD 630-SSt with welded housing and ground surfaces; ● Product separator with discharge rotary valve (certified ATEX protection system); ● Pneumatic conveying line with air inlet/outlet, including suction blower; ● WITHOUT control system, without frequency inverter Hnjdpfxox Ac Rbs Aiteu

Year of construction: 2016, condition: used, Malt milling with 4-roller grist mill. Additional title: with 4-roller grist mill Hnodpew Tmtvsfx Aitju Capacity: 4 t/h Operation / Control: Siemens Simatic S7-300 Features: 3 x silo discharge, small; 4 x silo discharge, large; malt transport; blower; malt scales; malt conditioning; malt mill, 4-roller; control cabinet and control system

Condition: new, Year of construction: 2024, SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBING MACHINE Efficient floor cleaning combined with extremely easy handling. Bring back the shine to your hall! The all-electric ride-on scrubber-dryer from SCHORR makes cleaning large hall areas much easier, especially thanks to the machine's excellent maneuverability. The steering angle is 90°, so columns or narrow spaces, for example, are no problem. No special training is required to use the machine. Simply fill it up, mount it and drive off. With the 100Ah batteries installed, intensive continuous use of approx. 4 hours is possible. The batteries are conveniently charged with the supplied charger at a standard 230V socket. SCHORR SCRUBBER DRYER RR1030FS - DISCOVER THE ADVANTAGES: -- Fully electric scrubber dryer with 1030mm working width - ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80 liter fresh water tank and 85 liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical data Manufacturer (abbreviation): SCHORR Type designation of the manufacturer: RR1030FS Drive: Seat Power suction motor: 500W Power: Brush motor: 500W Power: Drive motor: 500W Operating time: approx. 4 hours Number of wheels: 3 Tires: PU (non-slip) Own weight: 250kg Basic dimensions Fresh water tank volume: 80l Dirty water tank volume: 85l Brush diameter: 510mm Total length: 1400mm Hnedpfeuacy Ajx Aitou Total width: 1030mm Overall height: 1100mm *Further technical data available on request. The ride-on scrubber dryer is designed to be user-friendly to make the cleaning process as straightforward as possible. The intuitive control panel makes it easy to control all functions, so even inexperienced users can quickly get to grips with it. Thanks to the ergonomic seat and clear view of the cleaning surface, you can work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure that long cleaning intervals are possible without the need for frequent refilling or emptying. The machine is easy to maneuver and is ideal for use in large areas. Of course, we usually have all spare parts in stock and can deliver them quickly if you do have a problem. If you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. Would you prefer to finance or lease the appliance? No problem! We also offer you attractive options for this. Simply contact us and we will advise you on the various options. We look forward to hearing from you! We at SCHORR will be happy to answer any questions you may have about our ride-on scrubber-driers. You can reach our competent team by phone or email. We look forward to hearing from you and being able to help you with advice.

Condition: used, Year of construction: 2013, 2-roller mill with grist bin and 2 pipe chain conveyors. Malt extraction and milling capacity approx. 500 kg/h, malt milling transport capacity for mashing approx. 1000 kg/h. Hodpfxow Tdyge Aitsnu Additional title: with grist bin and pipe chain conveyors Malt transport capacity approx.: 500 kg/h Malt mill capacity approx.: 500 kg/h Maltgrist transport capacity: 1000 kg/h Maltgrist bin capacity approx.: 450 kg Position: Installation at ground level, mill on top of the grist bunker Features: 1 pipe chain conveyor from the silo to the grist mill, 1 pipe chain conveyor from the grist bunker to the mash tun, 1 malt grist mill, 1 grist bunker

Condition: good (used), Year of construction: 2001, 2 x wheat beer fermentation tanks with a net capacity of 14,600 liters Technical data / dimensions: Available quantity: 2 Volume: approx. 14,600 liters (gross volume approx. 19,000 liters) Type of container: wheat beer fermentation tank Hjdpfjvn Ihtex Aitonu Condition: used Suitable for food: yes Design: upright External diameter: approx. 2600 mm Cylindrical height: approx. 4100 mm Total height: approx. 4700 mm Operating pressure: pressureless Ground clearance: approx. 500 mm Operating temperature: + 20 degrees Celsius Manufacturer: Gresser Behälterbau Year of construction 2001 Material/condition: Inner casing material: V2A (1.4301) Cooling: External cooling coils Cooling medium: glycol Operating pressure: + 2.0 bar The containers have a gross capacity of around 19,000 litres and a net capacity of around 14,600 litres. The difference is due to the "overflow spout" (see drawing) The platform and the cleaning gate are also offered

Condition: new, working width 1250 mm working area: 6400 m²/Std. tank capacity Wasser 10l l 0 80 l weight of the machine ca. 0,45 t dimensions of the machine ca. 1,6 x 1,2 x 1,3 m Sweeper - with charger - 2 x 400mm side brushes - incl. water tank Hnedpfxoyrhuxj Aitju