Used Thread Milling for sale (11,164)

Condition: new, Clean air extraction / dust extractor Credpfx Asr A Eq Rsilod Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: excellent (used), Catalogue number 7248 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm Credpezh H A Esfx Ailjd - spindle diameter: 40 mm - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7393 TECHNICAL DATA Cross-cut saw: max saw blade diameter 350mm spindle 30mm tilt/adjustable blade right/left, up/down motor 1.5kW Spindle moulder: tenoning spindle: spindle diameter 40mm spindle working height 145mm max cutter diameter 400mm motor 3.7kW side carriage adjustable up/down clamp on the carriage table + fence with angle adjustment 600x400mm dimensions (L/W/H) 1700x2050x1260mm Cedpfxjzh Hxao Ailjrd weight approx. 500kg ADVANTAGES – German-made – very good condition – used tenoning machine Net price: 7900 PLN Net price: 1880 EUR Net price calculated at 4.2 PLN/EUR (for significant exchange rate fluctuations, the price may change)

Condition: good (used), Year of construction: 2015, Ref. -No.: 10652 Manufacturer: DMG MORI Type: NT 4300 DCG 1000 S Year of construction: 2015 Type of control: CNC Control: Fanuc F31iA5 Storage location: Halberstadt Country of origin: Japan Machine-No.: NT430XXXX Turning Length: 983 mm Spindle power: 18,5 / 11 kW Travel -X Axis: 750 mm Travel -Y Axis: +-210 mm Travel -Z Axis: 1220 mm Max. machining diameter: 660 mm Number of tool stations: 100 pc Tool configuration: CAPTO C6 Tool holder: 70 pc Further information: - Control and Measurement Systems - Control computer: Fanuc F31iA5 - Tool measurement system: included - Included equipment - Internal tool cooling system + high-pressure pump - Conveyor belt - Controller - Foot switches for main and sub-spindles Codpfjzh Hl Tex Ailerd - Tool measurement arm - Machine manuals The machine can be inspected while powered on by prior arrangement.

Condition: used, Year of construction: 2005, Technical details: Crsdpfx Aowp D Nboilod turning diameter: 275 mm turning length: 900 mm spindle passage: 65 mm power capacity at 100 % load: 25/20 kW spindle turning speed range: 1 - 5000 U/min spindle diameter in front bearing: 110 mm c-axis: 1 - 500 U/min. number of workpiece supports: 4 tool turret: 1 x-axis: 290 mm y-axis: 165 mm z-axis: 360 mm b-axis: 360 ° rapid speed: 18/30 m/min number of tools: 2x2 + 2x2 number of driven tools: 2x2 + 2x2 mm toolpiece turning speed range: 8000 / 2000 U/min power capacity: 25% ED 5,8 kW tool taper: TRAUB 60 tool turret: 2/3/4 x-axis: 170 mm z-axis: 600/950 mm y-axis: +/- 60 mm rapid speed: 18/15/30 m/min number of driven tools: 10 mm toolpiece turning speed range: 1 - 6000 U/min power capacity: 25% ED 5,8 kW tool taper: DIN 69880 40 x 63 total power requirement: 95 kW weight of the machine ca.: 16 t dimensions of the machine ca.: 10,0 x 3,5 x 3,0 m with CNC TRAUB TX 8i, Barloader TRAUB Stamag DNH61 / 3000, Main and Sub spindle with C-axis 1 support with B-axis 3 turret supports dust exhauster, coolant attachment with coalescence-seperator and chip conveyor 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package *

Condition: as good as new (ex-display),

Condition: excellent (used), Year of construction: 2007, CNC control: Heidenhain TNC 124 Travel ranges: X-axis travel: 620 mm Y-axis travel: 420 mm Z-axis travel: 400 mm Credpfezh Effex Ailod Main spindle speed range: 50 - 4000 rpm Gear stages: 2 Main spindle drive power: 6 kW Tool holder: ISO 40 Clamping force: 10 kN Spindle head: manually swiveling ±45° Max. tool diameter: 125 mm Max. tool weight: 6 kg Table clamping surface: 400 x 800 mm T-slots: 5 x 14 x 80 mm Max. table load: 400 kg Feed rate X / Y: 0 – 6000 mm/min Feed rate Z: 0 – 4000 mm/min Rapid traverse X / Y: 6000 mm/min Rapid traverse Z: 4000 mm/min Total connected load: 10 kW Footprint L x W x H: 2850 x 3350 x 2000 mm Machine weight: 2100 kg

Condition: excellent (used), LOG CABIN MILLING MACHINE FOR PRODUCING CHALET CORNER JOINTS BY MILLING FOUR SIDES OF THE LOG BEAM. MAXIMUM LOG LENGTH 6000MM (DISTANCE BETWEEN 5770 MM) MINIMUM LENGTH 450 MM 4X MILLING HEADS PER SIDE (2 SIDES) CAPABLE OF 3 CYCLES PER MINUTE MAXIMUM WIDTH 250 MM MAXIMUM THICKNESS 140MM SUPPLIED WITH ADJUSTABLE TOOLING SUITABLE FOR 34MM TO 70MM JOINTS 8X 4 KW MILLING MOTORS DIGITALLY DISPLAYED LENGTH MEASUREMENT SYSTEM SIMPLE ELECTRONIC CONTROLS (NO PLC) 5,5 KW FEED MOTOR POSSIBLE TO SUPPLY WITH STACKING UNIT AFTER IF NEEDED Cedpfoy Sgx Rjx Ailerd MODIFIED LEFT SIDE TO ALLOW CHALET ROOF OVERHANG LENGTH AS NEEDED VERY GOOD QUALITY KNOTCHING PRICE DISMANTLED AND LOADED TO TRUCK

Condition: new, Year of construction: 2026, functionality: fully functional, We deliver the machines where you want them, install them if you wish by mutual agreement. Optional: stainless steel drain element, stainless steel storage silo, blower, pipes approx 3 meters. Grinder 800 series 22 kW or 37 kW 3 x 2 blade set configuration. Cedst Iw Huopfx Ailsrd Bwj3E79Mpn 2 x stators screen deck your request With Variablele Frequency controller, Optional Product discharge and storage in various options in combination extra favorably priced Motor power adaptable. Other adjustments can be discussed such as a rotor adjustment, more blades e.g. 5 rows of blades or heavy duty version. Delivery / time in consultation. Call or email us for consultation or if you have questions, please respond with your name, company name, and correct phone number. Without these correct details RSS Recycling Shredders and Solutions (Netherlands) cannot respond.

Condition: used, functionality: fully functional, Spindle mount: 40 or Morse 4 Maximum spindle torque: 9000 kgcm Crodpfx Aszi Hpbjiled Table: Clamping surface: 1250 x 250 mm Max. table load: 3200 kg Number of T-slots: 3 pieces, 14 mm wide Slot spacing: 55 mm Travel: Longitudinal: 810 mm Transverse: 275 mm Vertical: 400 mm Automatic feeds: 14 – 900 mm/min Rapid traverse: up to 2800 mm/min Motors: Spindle motor: 4.2 kW Feed motor: 0.75 kW Other: Machine weight approx. 1800 kg Dimensions: length: 1900 width: 1700 height: 1700 mm Financial information VAT/margin: Margin: The displayed price includes VAT (VAT is not deductible for businesses).

Condition: good (used), functionality: fully functional, Table dimensions 1250 × 290 mm, 800 mm X travel 370 mm Y travel 450 mm Z travel automatic feed on drilling quill, 3 settings: 0.035 / 0.070 / 0.140 automatic feed and rapid traverse on X and Y axes electric rapid traverse on Z axis Spindle ISO 40 with speed range 56–4500 rpm, table load capacity up to 200–500 kg, Machine dimensions: 1.90 m (length) × 1.70 m (depth) × approx. 2.3 m (height) machine weight approx. 1.7 tons. year of manufacture: 1986 Cedpezi Hihsfx Ailerd Please note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or a contract and we recommend you verify all relevant details. Financial information VAT/margin: VAT: The price shown is exclusive of VAT (VAT deductible for businesses).

Condition: used, Year of construction: 2012, x-travel 800 mm y-travel 800 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle tunring speed 30 - 8.000 U/min spindle drive 25 kW torque 244 Nm tool taper SK 40 number of tool places 30+190 Pos. A-axis ° C-Axis 360 ° table surface area 800 x 630 mm table load 600 kg rapid traverse ( x / y / z ) 40 m/min auto power on hours ca. 79.968 h spindle hours ca. 800 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. The spindle has been overhauled. Technical Features & Accessories: - Additional magazine - Chip conveyor - Infinitely variable speed control - 5-axis simultaneous machining - 70 bar internal coolant supply - Flushing nozzle - Workpiece measuring probe - Blum laser tool control - Heidenhain 410 electronic handwheel Accessories, tools, and clamping devices shown are only included in the scope Crsdpjyzt Dljfx Ailjd of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 1998, x-travel 0500 mm y-travel 400 mm z-travel 400 mm table surface area 700 x 500 mm tool taper 40 SK/ISO spindle turning speed range 20- 4500 U/min feeds 5000 mm/min spindle motor 12 kW total power requirement 13 kW weight of the machine ca. 2,8 t Credpfjzhxi Dsx Ailod dimensions of the machine ca. 3 x 2 x 2 m Table could be rotated and swiveled manually with digital readout in C- and B- axe over control panel. Control: Heidenhain TNC 124.

Condition: used, Year of construction: 2002, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, spindle speed (min.): 4,000 rpm, TABLE DIMENSIONS: 2000 x 750 mm ROTARY TABLE DIMENSIONS: Diameter 800 mm TOOL CHANGER: 30 positions AUTOMATIC HEAD CNC: HEIDENHAIN TNC 530 Cedpszi Eyrjfx Ailjrd

Condition: excellent (used), Copy milling machine Elumatec type KF 78/60 Csdpfsvi R Avex Ailsrd EU shipping - 350 euro

Condition: excellent (used), Shipping eu 300euro Codpel Skk Ajfx Ailerd

Condition: excellent (used), Shipping within the EU: 350 euros Codpfx Aiol Sklgjljrd

Condition: excellent (used), shipping EU ~300euro Crodel Skk Uopfx Ailsd

Condition: excellent (used), GRAULE AKF 6/250 Milling cutter diameter 250 mm Credpfx Ajl Skk Hsilod Shipping within EU ~300 euro

Condition: reconditioned (used), workpiece diameter (max.): 60 mm, roll diameter: 185 mm, roll width: 150 mm, One - Reconditioned ORT Model RP18 - 18 ton Hydraulic Thread Rolling Machine with fixed rolling spindles for in-feed rolling or thru -feed rolling with helical thru-feed dies. Including new rolling spindles , new bearings and new worm gears & shafts Codpfxjyml Eke Ailjrd etc Max rolling dia: 60mm - Max rolling width with in-feed dies: 150mm - Max rolling width with thru-feed dies: infinite Spindle diameter : 69.85mm & 80mm - Power of main motor: 7.5kw With one pair of spindle sleeves 69.85mm i.d. x 80mmo.d. & 17 sets thread dies 60mm, 120mm & 180mm wide from M6 to M24 Photographs taken before reconditioning

Condition: good (used), functionality: fully functional, type of input current: AC, Pee-Wee Model P24US Hydraulic Thread Rolling Machine for in-feed or thru-feed rolling with helical thru-feed dies Max. rolling pressure: 24 tons Max rolling diameter: 75mm Min rolling diameter: 5mm Max rolling width: 200mm Diameter of rolling spindles: 69.85mm & 80mm Max thread die diameter:210mm Variable spindle speeds: 20 -90 rpm Crjdpfxoxl Ebho Ailod With one pair of spindle sleeves 69.85mm i.d. x 80mm o.d. & 14 sets of thread dies 60mm, 120mm & 180mm wide from M6 to M24

Condition: excellent (used), Year of construction: 2014, operating hours: 21,200 h, functionality: fully functional, machine/vehicle number: 256316, turning length: 1,000 mm, turning diameter: 730 mm, spindle motor power: 18,500 W, spindle speed (min.): 35 rpm, spindle speed (max.): 12,000 rpm, travel distance X-axis: 1,100 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 50,000 m/min, rapid traverse Y-axis: 50,000 m/min, rapid traverse Z-axis: 50,000 m/min, rotational speed (max.): 1,000 rpm, rotational speed (min.): 35 rpm, type of input current: three-phase, torque: 160 Nm, workpiece weight (max.): 680 kg, spindle nose: Cône 7/24, N°40, table load: 880 kg, number of slots in tool magazine: 120, pallet changer: automatic, Equipment: CE marking, chip conveyor, documentation/manual, We are offering this Mazak INTEGREX i500V CNC turning and milling machining center, in very good condition, year of manufacture 2014. Crsdpfx Asyymrmoilsd Manufacturer: Mazak Model: INTEGREX i500V Year of manufacture: 2014 Condition: very good If you have any questions or need more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 1964, functionality: fully functional, feed length X-axis: 700 mm, feed length Y-axis: 250 mm, feed length Z-axis: 490 mm, travel distance X-axis: 700 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 490 mm, total height: 1,720 mm, total width: 1,920 mm, total length: 2,250 mm, table width: 305 mm, table length: 1,100 mm, overall weight: 2,000 kg, space requirement width: 1,920 mm, space requirement length: 2,250 mm, space requirement height: 1,720 mm, Equipment: documentation/manual, We are offering this well-maintained Schaublin 53 milling machine, manufactured in 1964, for sale. Serial number: 271090 Cedpfx Aieyhm D Delsrd Technical data – Schaublin 53 N Model: N Longitudinal travel of table (X): 700 mm Vertical travel (Z): 490 mm Cross travel (Y): 250 mm Table clamping area: 1100 × 305 mm Number of T-slots: 5 Max. slot width: 14 H7 mm Spindle mounting (internal taper milling arbor): ISO 40 Spindle bore: 25.2 mm Main motor: 3 / 1500 kW·t/min Rapid feed motor: 1.2 / 3000 kW·t/min Power: 5.1 kW Rapid traverse speed: 3500 mm/s Dimensions (L×W×H): 2250 × 1920 × 1720 mm Weight: 2000 kg Documentation available Accessories available: Dividing head, steady rest, jaw chuck, centering point, various clamping elements and accessories If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), A Maho universal milling machine overhauled in 2020 is available. Travel X/Y/Z: 600mm/400mm/400mm, table dimensions X/Y: 900mm/460mm, max. table load: 250kg, tool holder: SK40, tool positions: 16, spindle speed: 4500rpm, feed rate: 4m/min, rapid traverse: 5m/min. Machine dimensions X/Y/Z: approx. 2450mm/3200mm/1900mm, weight: approx. 2800kg, control: Maho CNC 234. The machine has a suspected defect on the control board. Documentation available. An on-site inspection is possible. Cjdpfszi Eh Nex Ailjrd

Condition: good (used), Year of construction: 1982, Bed milling machine Machine type: Reiden BF 4 Control: Siemens 840 D powerline Year: 1982 Revision: 2004 SPECIFICATIONS Crsdpfxozi Dzus Ailed X-Axis: 2.000 mm Y-Axis: 800 mm Z-Axis: 1.000 mm Feed: (X/Y/Z): 6 m/min. milling head Angular range: +/- 90° Spindle speeds: 20 - 2.000 rpm Spindle power: 21 kW Tool: ISO 50 Table size: 2.200 x 700 mm Machine weight: 10.000 kg