Used Thread Coiler for sale (2,669)

Year of construction: 1985, condition: used, workpiece diameter 25-90 mm threading length 3000 mm thread pitch 2-16 mm Bjdpfx Aotzdyzecyelp total power requirement 25 kW weight of the machine ca. 10,5 t dimensions of the machine ca. m

Condition: used, sheet width 320 mm coil weight 1,5 t coil outside dia. 1250 mm Blodjqkwviepfx Acysp diameter of the mandrel 370/430 mm Mandrel height 1000

Condition: good (used), max. tapping capacity, metric thread brass M33, cast iron M16, steel M14, incl. accessories Bjdpfeibmn Esx Acyslp

Condition: ready for operation (used), Ridgid 1224 Threading Machine, Thread Cutter, Used Machine Overall dimensions: Length: 1140 mm Width: 720 mm Height: 1110 mm Capabilities: Pipe threading: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) with 161 geared threading attachment. Bolt threading: 1⁄4″ – 2″ (6 – 52 mm). Features: Threads 1⁄4″ – 2″ pipe at 36 RPM and 2½″ – 4″ pipe at 12 RPM. Model 1224 is suitable for threading various types of pipes including black, galvanized, plastic-coated pipes, as well as stainless steel, IMC, and heavy-wall pipe and rod up to 30 Rockwell C hardness. Induction motor ensures noise levels remain within regulatory limits. Special capacitor start/capacitor run motor allows full-range threading even under voltage drop conditions. Uses a 1⁄4″ – 2″ universal die head and a 2½″ – 4″ adjustable die head to cut tapered or straight NPT/NPSM or BSPT/BSPP threads. Constant and proper lubrication of dies and workpieces via head-through oiling. Technical specifications: Motor: 1.1 kW, single-phase, 50 Hz, induction type. Bledpfowwgvyox Acyop Switches: Reverse / Off / Forward heavy-duty rotary switch and integrated foot pedal. Spindle speed: 36/12 RPM. Gearbox: Two-speed transmission with 3:1 ratio. Chuck: Hammer-type with replaceable inserts. Rear centering device: Cam-operated. Pipe cutter: Model 764, fully self-adjusting and self-centering, with 1⁄4″ – 4″ F-229 cutting wheel. Reamer: Model 744, bladed type, 1⁄4″ – 4″. Lubrication: Through the die head. Pump: Self-priming, gear-type, automatic reversing, with constant flow.

Condition: used, Year of construction: 1995, material width 400 mm coil weight 2,0 t coil internal dia. 480 - 520 mm Bljdpfxevuunge Acyep coil outside dia. 1500 mm with hydraulic auxiliary drive with mechanical lag brake, hydraulic centralized expansion, pneumatic snubber roll, coil loop control via contact plate min. material width 20 mm

Condition: excellent (used), thread dia. 5 - 200 mm grinding length 500 mm thread pitch 0,25 - 6 mm clamping length max. 850 mm grinding wheel diameter 350 mm centre height 105 mm thread M2 - M149 thread - inch 3/32 - 4 inch. inclination li/re +/-10 ° Bedpowvl H Usfx Acyjlp total power requirement 6 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 2,5 x 1,7 x 1,5 m

Condition: used, Year of construction: 2001, pressure 0,2-40 t max. workpiece diameter 70 mm threading length 120 mm Control total power requirement 29 kW weight of the machine ca. 9,5 t Bledpfx Aot Hw N Tecyop dimensions of the machine ca. m

Condition: good (used), Tapping chuck, thread chuck, tapping chuck, thread cutting attachment -Manufacturer: Fahrion, thread cutting attachment GA 30 -Shaft: MK3 -Reversing gear: integrated quick return, slip clutch -Clamping diameter: max 23 mm -Dimensions: 230/125/H80 mm -Weight: 6.3 kg Bsdpfswvfyujx Acyslp

Condition: ready for operation (used), Afrolmachine 5 ton Middenhoogte: 1300 mm Spoellengte: max. 1100 mm Decoiler is verplaatsbaar, gemonteerd op chassis Bjdpfswu Inrox Acyslp Laadwagen is vast gemonteerd op chassis

Condition: ready for operation (used), Good condition Max width: 1300 mm Max diameter 1200 mm Bedpfx Acjflvfveyolp

Condition: used, Year of construction: 1999, material width 360 mm coil weight 3,0 t coil internal diameter 380 - 520 mm coil external diameter 1500 mm weight 1,4 t dimensions (WxDxH) 1,8 x 1,8 x 1,7 m with infinitely variable drive, hydraulic centralized expansion, coil loop control via contact plate can be inspected in running condition in our warehouse Bljdpsvut R Hjfx Acyep

Condition: good (used), WANDERER 16/E milling machine, made in Germany. Year of manufacture: 1962. The machine is operational and in working condition. Bledpfxjw Al U Ej Acyop For more information, please contact us.

Condition: used, Year of construction: 1979, workpiece diameter 320 mm threading length 300 mm thread pitch mm total power requirement 90 kW Bedpfxst Hwnpo Acyolp weight of the machine ca. 12000 kg dimensions of the machine ca. m Thread and worm grinder for steering worms

Condition: used, Year of construction: 1978, Gewinde-Ø 52 mm threading length 500 mm thread pitch entsprechend Hohlspindel -Ø 54 mm spindle turning speed range 25 - 140 U/min turning speeds: 6 Stufen voltage 380 V / 50 Hz main drive motor 3 kW total power requirement 4,5 kW weight of the machine ca. 0,75 t dimensions of the machine ca. 1,0 x 1,8 x 1,4 m • with pneumatic workpiece clamping, • threading head Z 52, • cooling device, • 2 sets of chaser holder,size: Z52/2B, + 21B Bledpjwt T Uhsfx Acyop • 5 sets of chaser jaws,pitch 1 - 2,5 mm Machine is in a good condition.

Year of construction: 1995, condition: ready for operation (used), 1 brought threading machine Manufacturer: Microtap Type: Megatap II Year of manufacture: 1995 Technical data: - Operating voltage, machine standard 230 V ± 10 % version microtap II - Frequency 50/60 Hz - Power consumption - Version G8/ 230 V 16 A / T (slow) - Compressed air unlubricated (ZAP - operation) min. 200 kPa (2 bar) max. 800 kPa (8 bar) - Compressed air unlubricated (MMS - operation) min. 400 kPa (4 bar) max. 800 kPa (8 bar) - Torque - Version G8 50 to 700 Ncm - Rotational speed - Version G8 300 up to 3.000 min-1 - Spindle stroke version Version G8 max. 85 mm - achievable thread depth Blodpsim Iqqefx Acyjp version G8 max. 75 mm - achievable accuracy of depth measurement 0,1 mm (without consideration of the tolerance of the tool holder) Operating instructions Dimensions, weights - Dimensions over all approx.: (L (depth) x W x H in mm) Version G8/14/16 - with column 750 mm at max. adjustment travel 544 x 312 x 1047 - With a higher column, the height dimension increases by the difference of the column height. - Machine type Spindle Tool holder Version G8 Taper B12 SZS / Quick change system SWS1 Working ranges - Adjustment travel of the columns in Z-direction (without tool) Column type Version G5 Version G8 Version G14 /16 750 mm approx. 430 mm approx. 400 mm approx. 388 mm - Thread capacity (cutting) - Version G8 M 2.5 - M 8 (X5CrNi189) (Metric ISO standard thread; M 2.5 - M 10 (9SMn28)

Condition: ready for operation (used), Year of construction: 2012, 8 Ton Rewinder, Used Machine Blodpfx Ajupr Ngecyop Overall dimensions: 2140 x 930 x 1070 mm Weight: 416 kg Minimum closing of the rewinder: 430 mm Maximum opening of the rewinder: 540 mm Max. load capacity: 8000 kg

Condition: used, Year of construction: 1979, material width 150 mm coil weight 1,5 t coil internal diameter 500 mm coil external diameter 940 mm strip material 20 x 1,0 - 50 x 4,0 / 200 mm wire diameter 1,0 - 5,0 mm power requirement 0,7 kW Bljdovuk R Dspfx Acyjp weight 0,7 t Dimensions (WxDxH) 1,0 x 1,7 x 2,0 m motoric driven palett decoiler band material approx. 20 x 1,5 mm - 50 x 4,0 mm / 200 x 2,0 wire diameter approx. 1,0 - 5,0 mm can be inspected in running condition in our warehouse

Condition: good (used), Thread cutting machine, pipe thread cutter, thread cutting head, thread cutting chuck, thread chuck, thread cutting apparatus -Manufacturer: Rems, thread cutting head Bodpfxswq Nvis Acyjlp -Pipe size: 2 1/2 to 4 inches -Spindle bore: dimensions see pictures -Dimensions: 410/400/H340 mm -Weight: 50 kg

Condition: used, Year of construction: 1985, thread dia. 254 mm grinding length 350 mm thread pitch 51 mm Control SIEMENS S 8 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m B A H M Ü L L E R Automatic Internal Thread Grinding Machine Model IPE 12 i.S. Year 1985 Serial No. 103174 _____ workpiece Ø, max. 300 mm workpiece length, approx. 350 mm height of centers (WP spindle/grinding spindle) 300 mm table stroke approx. 450 mm thread diameter ground max. approx. 254 mm thread diameter ground min. approx. 25,4 mm thread length ground in one setting max. 250 mm Lead range, max. 51 mm Lead angle max. 10 ° Total electrical load, approx. 12 kW - 380 V - 50 Hz Weight, approx. 5,000 kg Accessories / Special Features * This is a programme controlled (SIEMENS S 8) internal thread and internal worm grinding machine , suitable for the grinding of ball screw nuts. * All movements are controlled by the SIEMENS programme control * Automatic infeed for grinding depth. Bsdpfjt Hw U Aox Acyelp * Automatic diamond roll profile dressing device, motorized by hydraulic motor,and device can be swivelled and mechanically adjusted lengthwise. * FISCHER Internal grinding spindle up to 30.000 rpm with oil and air lubrication and with Infinitely variable grinding spindle speeds. • 4-jaws chuck approx.. Ø 250 mm * Separate switch cabinet, separate hydraulic unit, oil drip pan, etc. Condition : Good. Machine can soon be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 1998, condition: excellent (used), Technical detils : - Capacity - 500 nails/ min. Bodjh Hp H Sjpfx Acyjlp - Power - 7 kw - Wire range - 1,0 - 4,2 mm - Nails lenght - 30 - 150 mm - Year - 1998

Year of construction: 1968, condition: good (used), 1 used thread whirling machine for lathes Bsdpfxjpit Afo Acyjlp make Burgsmüller type L 2 serial number 68/1724

Condition: used, Year of construction: 2014, sewing machine - siemens computer - gigalynx signature control - change stitch Bjdpfx Aewwqikscyslp - thread separation - universe stacker plus

Condition: used, Year of construction: 1993, material width 350 mm coil weight 2,0 t coil internal diameter 470 - 530 mm coil external diameter 1500 mm Bjdpovuuapsfx Acyolp power requirement 1,0 kW weight 1,5 t dimensions (WxDxH) 1,3 x 1,6 x 1,9 m motoric driven, with manual expansion as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: not inspected (used), Weight: approx. 4,500 kg Bljdpswv N Ehofx Acyop

Condition: used, Year of construction: 1986, material width 300 mm coil weight 0,5 t coil internal diameter 420 - 520 mm coil external diameter 1400 mm weight 0,6 t dimensions (WxDxH) 0,8 x 1,2 x 1,7 m WITHOUT drive, with pneumatic lag brake, pneumatic centralized expansion Blsdpfxsvuufrj Acyep as is where is, in given condition