Used Thomson Friction Welding for sale (5,642)

Condition: excellent (used), Year of construction: 1991, *complete with ciller* Gsdpfjh U Iabjx Agbett Power voltage: 400 V, 50 Hz. Power requirement: max. 200 A

Condition: good (used), Merkle High Pulse 450DW shielding gas welding machine in fully functioning condition, with 6 additional packs of welding wire & including a full bottle (Argon, UN1956) Gtsdpfxjx Thqks Agbst

Condition: used, Lorch - MIG-MAG Inverter, MicorMIG 400 BasicPlus - Water-cooled suitcase system with controls in removable full-protection wire feed case, intermediate hose package 1m MicorMIG 400 BasicPlus - Water-cooled suitcase system Contactless data transfer The digital interface enables easy access to and management of your power source using Lorch NFC cards. Card management supports user permission control, allows reading and writing of jobs, and offers upgrade capabilities. Crater fill at weld end The switchable end crater filling ensures that the welding current does not end abruptly but is intentionally reduced. This allows the weld pool to cool and automatically fills the end crater with material at lower energy input. Arc dynamics control With arc dynamics regulation, you can select your preferred arc characteristics. Depending on the control panel, a range of dynamic levels from "soft" to "hard" are available. Infinitely adjustable welding inverter Unlike transformer systems, the Lorch MicorMIG allows the current-voltage ratio to be continuously adjusted to meet the required welding parameters. Versatility The Lorch MicorMIG operates with both Argon-CO₂ mixed gas and 100% CO₂, making it suitable for international use. Powermaster The Lorch Powermaster torch allows you to set all key parameters, such as work points and arc dynamics, directly from the handle. EN 1090 certified With the Lorch MicorMIG, synergetic control and automatic settings make it possible to weld in conformity with EN 1090. When combined with the Lorch EN 1090 advantage package and parameter settings via NFC cards, you are prepared for all welding applications. BasicPlus control concept: - “3-step and weld” operating concept - Stepless welding current adjustment Gsdsx Tg Dvepfx Agbett - Volt-ampere display - Switchable end crater fill (adjustable via submenu) - 7-level arc dynamics control - With automatic setup (synergy function) - Welding program selection in the wire feed compartment - 2-/4-step, spot, or interval welding selection - Fully upgradable Technical data: - MIG MAG welding range: 30–400 A - Stepless inverter - Weldable wires: 0.6 mm – 1.6 mm - Duty cycle at 100%: 300 Amps - Duty cycle at 30%: 370 Amps - Duty cycle at max current: 45% - Mains voltage: 3~400 V - Dimensions (mm): 880 x 490 x 955 - Weight: 61 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 21002752, type of input current: AC, overall weight: 105 kg, input voltage: 230 V, total width: 650 mm, total length: 950 mm, total height: 2,120 mm, volume flow: 950 m³/h, power: 0.5 kW (0.68 HP), arm reach: 1,800 mm, next inspection (TÜV): 12/2026, Equipment: type plate available, ESTA 55503 Airbox W3 in very good condition, captures air containing dust and welding fumes, year of manufacture 2021 Gjdpfx Agox Exlvebott

Condition: used, Year of construction: 2014, total width: 2,500 mm, total length: 5,000 mm, total height: 2,500 mm, Empty weight: 2.500 kg Price: On request Filter-area: 228m2 Capacity: 15.000 m3/h - Year: 2014 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 22653 - Control type: Herding MP 12 - Motor power: 55.0kW - Transport dimensions: 5000mm x 2500mm x 2500mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 6 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Godpfjwrr Htex Agbjtt Lukas van Rossum

Condition: new, table diameter 490 mm table load 300/150 kg swivelling range 0-90 manuell Grad table load horiz. 300 Kg table load vert. 150 Kg boring diameter 65 mm table turning speeds 0,4 - 4,0 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,1 t dimensions of the machine ca. 0,5 x 0,52 x 0,5 m The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - Infinitely adjustable rotation speed of the table Gtodpfsgvkktex Agbet - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking - Very good value for money

Condition: excellent (used), Year of construction: 1994, *complete with pcs. welding-tranformer 64 kVA/each welding capacity: 2 x 64 kVA Gtsdpfx Aei T N I Nsgbet nominal current: max. 160 Amp.

Condition: good (used), Wire electrode, welding wire, welding wire -Material: stainless steel -Welding wire: 307 -Diameter: 0.8 mm -Quantity: 1 roll 15 kg 1 roll approx. 5 kg Gtjdpfxsfnr Ite Agbst -Price: complete -Dimensions: Ø 300/100 mm -Weight: approx. 21 kg

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The Professional 750 3000x1500x200 mm table has a diagonal hole arrangement on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Gedpfx Aogvkc Nogbstt Including 6x feet basic equipment 650 Article no. 280858.X

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, DC welding unit consist of: 1 pce. Welding controller BIHLER B 10 3 pcs. Welding transformer Godpovxkzqjfx Agbett 1 pcs. Cooler unit Welding capacity: 3 x 70 kVA Capacity of the transformer 70 kVA at 50 % ED Power voltage: 400 V, 50 Hz.

Condition: excellent (used), Wire electrode, aluminum welding wire, aluminum welding rod made of aluminum-magnesium alloy -Net weight: 7 kg Gtedpocbkklsfx Agbst -Quantity: 1 package available -Total weight: 7.6 kg

Condition: new, table diameter 900 mm table load 1 t swivelling range 0-135 Grad excentricity 200 mm table turning speeds 0,12 - 1,2 U/min Torque 2000 N/m total power requirement 0,75 kW dimensions of the machine ca. 1,5 x 1,020 x 0,9 m The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Features: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control Gedpfjgvkikox Agbett - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading and trailing behind with eccentric burden - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: good (used), Welding rail Gtsded I H Szspfx Agbet -from: Röschermatic VM-19/S/CE vacuum unit -Length: 495/90/H 160 mm -Weight: 1.5 kg

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight of the machine ca. 2,5 t - high quality steel S355J2+N + plasma nitriding - Material thickness approx. 24.5 - 27 mm - Bore Ø 28 mm - Holes surface 100x100 mm grid - Rounded corners, edges and holes - Side panel height 200 mm - Hole spacing side panel 50 mm - Including scaling on the surface - Structure reinforced with ribs - Grid lines allow for precise builds Godpfxoibw Sxs Agbott The basic equipment foot is available in various lengths. The load capacity of the foot is 2,000 kg.

Condition: good (used), Wire electrode, welding wire, welding wire Gtsdpfeimd Siex Agbjt -Manufacturer: Copper, shielding gas wire electrode, partially used roll -Type: CuA18 Ø 1.0 mm -Dimensions: Ø 300/100 mm -Weight of roller: 5.2 kg

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional 750 Article no. 2400x1200x200 mm has a diagonal hole arrangement on the table top and a parallel hole arrangement in 50 mm grid on the sides. The holes have a diameter of 28 mm. The table has a material thickness of about 24.5-27 mm and is made of high quality steel S355J2 + N. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Gedpfx Agegvkfvjbett Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: good (used), Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Manufacturer: Dukane, Ultrasonic welding transducer, Ultrasonic vibration unit -Welding converter: Type 41B30 92320 342881 Gtedpfxsxu Ex Eo Agbjt -Horn: Type US349563 110-2514 20 kHz -Ultrasonic sonotrode: 001944-03-4002-03 -Quantity: 1x ultrasound transducer available -Dimensions: 450/110/H83 mm -Weight: 4.6 kg

Condition: new, table diameter 560 mm table load 0,3 t swivelling range 0-90 Grad table turning speeds 0,25 - 4 U/min Torque max. 360 N/m centre of gravity max. 150 mm total power requirement 0,4 kW Gtjdpfx Aegvkgtjgbot The D-HB tilt and turn tables are very stable due to their heavy construction and therefore particularly suitable for heavy and precise Positioning activities and circular welding work. Characteristics: - Easy installation - Increase in production is made possible - Improvement of the welding quality through optimal positioning and Cruise control - Reduction of crane hours and handling time, during which the Improved occupational safety. - Self-locking gear, therefore no leading or trailing behind with eccentric load - Electronic components from Schneider, Siemens and Delta - Frequency-controlled stepless speed of the turntable - High stability due to the robust construction - CE certificate - The D-HB series includes a remote control with foot pedal for left-right / Start-stop.

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 1,0 t The table Professional Extreme Article no. 4-280030.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at a distance of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Gsdpsgvkfysfx Agbstt Including 4x feet Basic equipment 650 Article no. 280858.X

Condition: new, table diameter 350 mm table load 0,1 t swivelling range 0-90 Grad table load horiz. 100 kg table load vert. 50 kg boring diameter 30 mm table turning speeds 0,5 - 5 U/min voltage 230 V total power requirement 0,2 kW weight of the machine ca. 0,2 t Gjdpjgvkk Nsfx Agbett dimensions of the machine ca. 0,5 x 0,5 x 0,5 m Welding table with hollow shaft D-DWP Tilt and turn tables with bore for turning, tilting and welding small workpieces from 100 kg. - Rotation and tilt axis - Infinitely variable speed - Compact model - Incl. Foot pedal

Year of construction: 2021, condition: used, current capacity - kVA number of controlled axis - Gtodpfx Agjrr Amiebst workpiece weight - kg Used Lorch Cobot Welding Package CB3 series incl. PushPull torch + rotateOne rotary positioner Cobot operating hours: 334 hours. Features/Description: - Optimal for aluminum applications - Complete set of Cobot and Lorch welding equipment - For mounting on welding tables with hole size 16 or 28 (welding table not included). package included) - Welding system with special cobot interface, full-process equipment and Cooling system with increased cooling capacity, can also be used as a manual system if required - PushPull Cobot burner with 3.5 m hose package length and dual-circuit cooling - Burner original equipment set for aluminum 1.0/1.2 mm - Boom boom with balancer and line holder for optimal hose parcel handling *Technical data Welding range (in A) 25-400 ED 100% 40°C (in A) 320 ED 60% 40°C (in A) 350 ED at max. current 50% - RotateOne rotary positioner with 200mm 3-jaw chuck - integrated into the cobot control (no additional control) *Technical data Rotation speed up to 90°/s Load capacity 120 kg Torque up to 45 Nm Tilt angle -10° to 90° (manual) Important: The machine offered is an incomplete machine according to Machinery Directive 2006/42/EC, Article 2g. A protective device in accordance with country-specific guidelines is required. The machine integrator therefore has to create all the necessary documents Additionally: (optionally available) - SIEGMUND welding table

Condition: new, table diameter 690 mm Gedpfx Aeh Evt Uegbstt table load 500 kg swivelling range 0 - 90 Grad table load horizontal 500 Kg table load vertikal 250 Kg boring diameter 100 mm table turning speeds 0,2 - 1,9 U/min total power requirement 0,37 kW The D-BYT N welding manipulator has a hollow shaft, also known as Spindle bore in the rotary table, which makes inert gas welding possible. the Due to the compact design, turn-tilt tables can be installed in any integrate existing production facilities. Inert gas welding (forming gas). thereby simplified. Features: - Double foot pedal (start-stop/left-right) included - The new welding table D-BYT-500N includes, in addition to the standard start/ Stop foot pedal also an extra remote control (on the cable). - Infinitely adjustable rotation speed of the table - Suitable for any welding process, even high frequency - Very high stability - compact model - Through hole in the turntable plate - CE marking

Condition: new, 0,6 t -- mm -- mm consisting of: 30x article no. 2-280510 Quick release pin short - Clamping of 2 components - burnished - with twist lock 8x article no. 2-280410.N Universal stop 150 L - nitrided - nitrided - as standard with fine scaling on both sides 4x article no. 2-280420.N Universal stop 225 L - nitrided - nitrided - as standard with fine scaling on both sides 8x article no. 2-280110.G Stop and clamping angle 175 L - cast / black oxide finish - Hole / elongated hole - Cast / burnished Gedpfx Agjgvq Hlebstt 2x article no. 2-280162.N Stop and clamping angle 500 G - nitrided - Left stop - nitrided 1x article no. 2-280166.N Stop and clamping angle 750 G left - nitrided - Left stop - nitrided 1x article no. 2-280167.N Stop and clamping angle 750 G right - nitrided - stop on the right - nitrided 1x article no. 2-280910 Tool trolley - painted - Permissible total weight 240 kg 1x article no. 2-280164.N Stop and clamping angle 500 G with turning angle left - Left stop 1x article no. 2-280165.N Stop and clamping angle 500 G with right angle of rotation - stop on the right - Cast / nitrided 4x article no. 2-280152.N Stop and clamping angle 300 G - nitrided - Left stop - nitrided 8x article no. 2-280651.1. Prism Ø 60 135 ° with screwed-in collar - aluminum - aluminum - M16 thread for e.g. B. Prism Extension Item No. 280649 16x article no. 2-280610.N Professional screw clamp - nitrided - nitrided 6x article no. 2-280630.N Professional screw clamp 45 ° / 90 ° - nitrided - nitrided 4x article no. 2-280426.N Universal stop 300 - nitrided - 3 system holes - nitrided

Condition: new, table length 3000 mm table width 1500 mm table height 200 mm weight of the machine ca. 1,6 t The table Professional Extreme Article no. 4-280040.X7 2400x1200x200 mm has a hole arrangement in the 100 mm grid on the table top and a parallel hole arrangement in the 50 mm grid on the sides. The holes have a diameter of 28 mm and the table has a material thickness of about 24.5-27 mm. The table top is made of hardened tool steel. The low-loaded sidewalls are still made of steel S355J2 + N for cost reasons. Grid lines at intervals of 100 mm make it easier for you to set up your device. The welding tables are provided with scale as standard. Including 6x feet basic equipment 650 Article no. 280858.X Gedpfx Agjgvkc Tobett

Condition: new, table length 2400 mm table width 1200 mm table height 200 mm weight of the machine ca. 913 kg 7D - Through hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Sidewall made of high quality steel S355J2+N + plasma nitriding - Bore Ø 28 mm Gtedpjgvkf Djfx Agbst - Holes surface in diagonal grid - Rounded corners, edges and holes - Side panel height 200 mm - Holes in the side wall in the diagonal grid - Including scaling on the surface - Structure reinforced with ribs - Grid lines enable precise build-ups Including 4x feet basic equipment 650 item no. 280858.X