Used Thermal Ctp for sale (1,247)

Condition: new, maximum load weight: 29,600 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,600 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer stainless steel tank trailer for bitumen 32m³ TECHNICAL INFORMATION: * Vehicle code K.STS 32 / 1 - 10 / 24 * ADR suitable for the transport of dangerous goods * ADR tank code ADR tank code L4BH * Tank diameter 2,000 mm * External length 11,250 mm * Height 3,600 mm * Axle distance (Wb) 6,300 mm * Axle distance (A) 1,310 mm * Rear overhang 3,580 mm * Fifth wheel height 1,220 mm TECHNICAL CAPACITY: * Volume 32.0 m3 * Empty weight ±%3 6,400 kg * Axle load 27,000 kg * King pin capacity 12,000 kg * The operating temperature is 250 °C * Test pressure (+H bar) 4.0 bar * The operating pressure is 2.0 bar * Total weight 39,000 kg TANK: * Cylindrical tank container with a slope to prevent residual quantities in the tank, made of AISI 321 (DIN 1.4541) stainless steel with ADR code L4BH * Vacuum valve The operating pressure is 0.21 bar * 1 x thermometer is included * Number of chambers 1 compartment * Insulation thickness The container is insulated with 100 mm thick glass wool * Insulation lamination Aluminum coating, CTP bomb * Final bottom coating The insulation on the front and rear bottom of the tank is coated with glass fiber reinforced polyester (GRP) * Stainless steel insulation rings fitted on the entire tank container * Number of manholes 1 pc. * 2" side air line made of aluminum on the right side of the vehicle. 2" TW coupling air line is included at the rear. * 1 x pressure gauge is included on the side air line * Equipped with a 1.5" air line for a higher delivery rate for bitumen and * to free the hoses from residues of the transported goods after unloading * 2" upper air line with 2-way sliding valve made of stainless steel * Aluminium walkway on the dome area * Mechanically foldable fall protection on the walkway in accordance with UVV Cgodpfjr I S H Eox Abben * Access ladder on the right side of the container * The filling dome is on the front of the tank * There are 4 baffles in the tank DRAIN SYSTEM: * There is a DN100 bottom valve with handwheel operation on the discharge line, in accordance with the EN 14433 standard for dangerous goods. * Outlet line According to standard EN14433, outlet line starts with 4" bottom valve with handwheel control and leads to a 2nd safety valve for safe unloading (according to standard EN14432, 4" butterfly valve with mechanical control) and ends with a 3" TW coupling with internal thread and blind cover. A 1/2" sampling tap is included between the butterfly valve and TW coupling. * 1 x 6 m hose holder in an open-top box made of aluminum CHASSIS: * BPW axle with air suspension and disc brake and 3 x 9 tonnes permissible load capacity * BPW axles with 22.5" disc brake * Lift axle system on the 1st axle works automatically * KNORR-ILVL electronic air suspension ECAS * Tire size 385/65 R 22.5" 6-way * ALUMINUM rims * 1 x work light on the tank * Jost supports * 1 x plastic tool box, 400x480x600 mm OTHER: * ADR - Signum brand plate made of stainless steel, with a set of interchangeable numbers and foldable design * Danger sign in rigid design * Danger sign no: 3 * Danger sign no: 9 * Temperature sign * Environmental protection sign * 2 x fire extinguisher box without Fire extinguisher COLORS: * Chassis color RAL 3002 carmine red * Container color RAL 9006 white aluminum + paint We are happy to provide you with further information

Condition: new, maximum load weight: 30,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 7,480 mm, loading space width: 2,354 mm, loading space height: 1,460 mm, loading space volume: 24 m³, total width: 2,550 mm, total height: 3,050 mm, Year of construction: 2026, Equipment: ABS, Schmitz SKI 24 SL 7.2 Thermo steel tipper body 24.6 m³ * Body length: 7,480 mm * Body width: 2,354 mm * Volume: 24.6 m³ * Tyres: 6 x 385/65R22.5 * Satin-finish ALCOA aluminium rims * Fifth wheel height: 1,250 mm * Wheelbase: 4,800 mm * Extra-lightweight chassis frame * Folding underrun protection * Hyva hydraulic cylinder * Schmitz axles with air suspension and disc brakes * Paver brake * Automatic lowering during tipping process * Air bag pressure gauge * LED lighting * 2 LED reversing lights * Full thermal insulation * Prepared for electronic measurement technology * Tailgate with additional tension locks * 5 mm steel floor * 4 mm steel side walls * Roof tarpaulin with quick-release fastener * Chassis hot-dip galvanized * Tarpaulin colour: WHITE RAL 9010 * Body colour: WHITE ALUMINIUM RAL 9006 * ... For further information, please feel free to contact us! Available from October also with electric sliding roof. Cgsdpfjw U Hv Tex Abbjn

Condition: used, Year of construction: 2004, functionality: fully functional, BOTTERO 530 AVM – Year 2004 Automatic cutting table for laminated glass with thermal separation Max cut: 4,600 mm Thickness: 3+3 to 10+10 mm Precision: ±0.3 mm Cgjdpfx Asyf Id Hobbon Pneumatic pressure: 6/8 bar Power supply: 400 V / 50 Hz / three-phase

Condition: new, Empty weight: 240.000 kg Cargo space capacity: 3.000.000 l Productivity: 120 tph FULL AUTOMATIC TOWER ASPHALT PLANT 1.1 COLD AGGREGATE FFEDING CHASSIS(6*12m3) 6 1.2 Feeding bunkers and dosage conveyor bands 1+1 1.3 Collector and dryer mounted on the feeding conveyor band 1 1.4 STATIONARY CHASSIS 1 1.5 ROTARY DRYER GROUP 1 1.6 Dryer body 1 1.7 Aggregate inlet head 1 1.8 Aggregate outlet head 1 1.9 Burner group (BALTUR) 1SET 1.10 Burner fuel pump 1 1.11 Burner blower fan 1 1.12 Elevator inlet 1 2.1 MIXER CHASSIS GROUP 1 2.2 Asphalt Mixer + Hot Aggregate Elevator 1 2.3 Aggregate weighing scale bunker 1 2.4 Filler Elevator and Weighing scale bunker 1 2.5 Filler Screw Conveyor 1 2.6 Bitumen weighing scale bunker 1 2.7 Mixer bitumen pump 1 2.8 Undersize hot aggregate silo(50T) 3 2.9 Filler stock silo 25 M3 2 2.10 Vibration Screen 1 3 DUST COLLECTING FILTER SET 3.1 Jet-Pulse filter body 1 Set 3.2 Nomex filter bag and cartridges 1 Set 3.3 Dust collector V spiral and bunker 1+1 Set 3.4 Filler silo(25Tons) 2 Set 3.5 Filler Screw Conveyor 2 Set Codsyf Dbnjpfx Abbjgn 3.6 Filter absorption fan 1Set 3.7 Dirty gas channel 1 Set 3.8 Chassis group 1 Set 4 BITUMEN STOCK TANK 4.1 50 Ton capacity boiling oil heating isolation bitumen tank(One for PMB)With Stirrer(Vertical) 3 SET 4.2 3 way pneumatic jacket valve group 2 SET 4.3 Mixer bitumen feeding pump 1 SET 4.5 Mixer bitumen weighing scale feeding pipe line 1 SET 4.6 Bitumen transfer pump 1 SET 4.7 Double wall bitumen pipe installations 1 SET 4.8 50 Ton capacity boiling oil heating isolation bitumen tank 1 SET 4.9 3 way pneumatic jacket valve group 2 SET 5 FUEL AND THERMAK GENERATOR CHASSIS GROUP 5.1 1.000.000 kcal/h capacity Thermal oil generator 1 SET 5.2 Boiling oil heating boiler 1 SET 5.3 Boiling oil circulation pump 1 SET 5.4 Fuel replenishing pump 1 SET 5.5 Fueling pump 1 SET 5.6 Automation-Control Cabin-Software-Compressor 1 SET 6 Granulator Feeder(Fiber Feeding with fan drive) 1 SET 7. Col Asphalt Recycling System(5m3 Hopper Feeder,500x22000mm Belt Conveyor,800x4000mm Belt Conveyor with Weighing System) 1 SET 8. Cladding(3 mm Deck Sheet on 50x50 Box Profile Coating) for Aggregate Hopper and Mixer Floor 1 SET 9. Real Time Gas Emission Measuring and Monitoring System(Integrated with PLC and Plant Automation)(Obserable by internet Connection) 1 SET 10. Dust Monitor PCE-PQC 23US Incl. Calibration Certificate 1 SET

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller model: DELTA, pipe diameter (max.): 65 mm, pipe length (max.): 4,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 300 mm, bending radius (min.): 90 mm, mandrel length: 4,000 mm, number of axes: 3, total length: 5,500 mm, total width: 1,600 mm, total height: 1,600 mm, warranty duration: 12 months, Equipment: CE marking, emergency stop, foot remote control, 3 Axis 65 CNC Mandrel Tube Bending Machine TROX Liv Makina's most powerful machine is the CNC mandrel tube bending machine capable of bending tubes and profiles up to 65 mm with 3 axes, suitable for bending jobs in the Shipbuilding Industry, Thermal Power Plants, Park and Garden Furniture, Fitness Equipment, and Exhaust Industry sectors. What is difficult becomes easy thanks to hydraulic bending.  Ability to import drawings via Solidworks Program  Operation in fully automatic or manual modes via interactive PLC control system  Multiple language options  Ability to view products in 3D  3D pipe collision simulation  Automatic pipe length calculation  Conforms to CE norms  Ability to see errors on display  Safety warning system  Easy usability thanks to Livmak Interface Technical Specifications – TROX 3Axis 65 CNC Max Bending Capacity: Ø65 mm x 2 mm Min/Max Mold Diameter: 90/250 mm Material Processing Length: 4000 mm Cjdoyhdzaopfx Abbegn Machine Dimensions: 5500x1750x1750 mm Total Motor Power: 15 Hp Machine Weight: 3 Tons

Condition: excellent (used), total height: 3,500 mm, tank capacity: 7,900 l, SERAP insulated stainless steel truncated conical tanks, model ST, with a capacity of 7,900 liters, specifically designed for winemaking and wine storage. The ST range by SERAP is renowned for its mechanical robustness, premium stainless steel build quality, and fermentation-oriented design, meeting the standards required in modern wineries. TECHNICAL SPECIFICATIONS - Manufacturer: SERAP - Range / Model: ST - Type: insulated truncated conical tank - Nominal capacity: 7,900 L Cedpfjyhc Ufsx Abbegn - Intended use: alcoholic fermentation, winemaking, storage - Material: 304 food-grade stainless steel (winery grade) - Insulation: integrated thermal insulation (meeting SERAP design specifications) Technical features: - Truncated conical stainless steel shell, optimized for fermentation and lees management - Truncated conical bottom, allowing for complete drainage and easy racking - Peripheral thermal insulation, providing high inertia and temperature stability - Reinforced stainless steel legs, rated for tank loadings Equipment: The tank comes equipped to standard SERAP ST configuration, including: - Lateral service ports - Drain valves suited for winemaking - Manhole and accessories as per manufacturer’s design Detailed dimensions and fittings: see downloadable schematic (positions of ports, height, diameter, access, and features) Condition & availability: - Professional used equipment - Tanks inspected, in sound structural condition - Available immediately, subject to prior sale Recommended applications: - Wineries - Cooperative cellars - Winery extension or renovation projects - Fermentations requiring high thermal inertia and conical geometry DIMENSIONS - Outside diameter: 2,500 mm - Total height: 3,500 mm - Capacity: 79 hL ANNEXES - 6-month warranty - CE compliant

Condition: used, mileage: 363,000 km, power: 368 kW (500.34 HP), first registration: 10/2019, fuel type: diesel, overall weight: 40,000 kg, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: soot filter, - Retarder - Air conditioning - 20 m³ tipping body, hydraulic tailgate - Thermally insulated - Suspension: leaf-air Cedeyg Uubspfx Abbegn

Condition: used, mileage: 255,300 km, power: 375 kW (509.86 HP), first registration: 06/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, navigation system, parking heater, Lowliner * Full service history ---- ----* 12-speed automatic transmission * Front axle with air suspension * Front axle load: 8.0 t * Electronic Braking System (EBS) with ABS and ASR * Disc brakes on front and rear axles * Electronic parking brake * Secondary oil retarder * Wheelbase: 3,700 mm * Aerodynamic side fairings * Massage function for driver’s seat * Comfort upper bunk, wide, adjustable * Lower comfort bed * PremiumComfort lower mattress * Shaving mirror * Electric sunblind, one-piece * LED ambient lighting, driving and living area * StyleLine Cgjdpfxjxx Efyo Abben * Electric stationary air conditioning * Automatic climate control * Residual heat utilization * Additional hot water heater, cab * Additional cab thermal insulation * Electric tilt/slide roof, glass version * Interface, Fleet Management System (FMS) * Trailer socket 24 V, 15-pin * ExtraLine * Illuminated Mercedes star * GigaSpace cab, 2.50 m wide, flat floor * Comfort cab suspension, air-sprung * Fixed air deflector with end flaps * External sun visor, transparent * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Heated driver’s seat * Rear tires: 295/60 R 22.5 * Front/lead/trailing axle tires: 355/50 R 22.5 * Rear axle air suspension, Lowliner * Sound system * Navigation system * Axle load measuring device * 390-liter fuel tank * 60-liter AdBlue tank * 290-liter fuel tank * Automatic high/low beam and cornering light * Headlamp cleaning system * Engine: OM 471, R6, 12.8 l, 375 kW (510 hp), 2500 Nm * Engine type Euro 6, E * High Performance Engine Brake * Safety Pack * Climate Package * Economy Package * Driving Package * Comfort Package * Sight Package * Actros Driver Extent * Fifth wheel with plate, Jost JSK 42MK * Aluminium rims 9.00 x 22.5 * Aluminium rims 11.75 x 22.5, front axle * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Active Sideguard Assist * Tire pressure monitoring * Active Drive Assist 2 * Driver airbag * Cruise control * Actros model generation 5 * Under-bed fridge drawer * EBS * Metallic paint * Without spare wheel ----Sale to trade customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We are happy to provide you with a leasing or financing offer.

Condition: used, mileage: 187,900 km, power: 375 kW (509.86 HP), first registration: 11/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, navigation system, parking heater, Lowliner * Full service history ---- ----* 12-speed automatic transmission * Front axle air-suspended * Front axle 8.0 t * Electronic braking system (EBS) with ABS and ASR * Disc brakes on front and rear axles * Electronic parking brake * Secondary oil retarder * Wheelbase 3,700 mm * Driver's suspension seat, comfort * Comfort bed above, wide, levelable * Comfort bed below * Mattress below, PremiumComfort * Shaving mirror * Electric sun blind, 1-piece * LED ambient lighting, driving and living * Electric auxiliary air conditioning * Automatic climate control * Use of residual heat * Hot water auxiliary heating, driver's cab * Additional thermal insulation for driver's cab * Electric sliding/tilting roof, glass version * Trailer socket 24 V, 15-pin * Mercedes star, illuminated * GigaSpace driver's cab, 2.50 m wide, flat floor * Comfort cab suspension, air-sprung * Air deflector, rigid, with end edge flaps * Sun visor outside, transparent * Compressed air horns, cab roof * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Heating for driver's seat * Tires 295/55 R 22.5 HA * Tires 355/50 R 22.5 VA/VLA/NLA * Air suspension, rear axle lowliner * Sound system * Navigation system * Tank 660 liters + 75 liters AdBlue * Tank 290 liters * Automatic high/low beam and cornering lights * Headlight cleaning system Csdpfxjv Ez Dvs Abbegn * Engine OM 471, R6, 12.8 l, 375 kW (510 hp), 2500 Nm * Engine version Euro 6, E * High Performance Engine Brake * Safety Pack * Chrome package, interior * Climate Package * Media Package * Economy Package * Comfort Package * Sight Package * Stability Control Assistant (ESP) * Lane Keeping Assistant * Distance Keeping Assistant * Attention Assistant * Traffic Sign Assistant * Active Brake Assist 5 * Active Sideguard Assist * Tire pressure monitoring * Airbag, driver * Cruise control * Actros model generation 5 * MB ATS warranty in accordance with general terms and conditions from first registration 3 years/450,000 km * Refrigerator in drawer under bed * EBS * Without spare wheel ----Sale to businesses only! No guarantee for the information! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to make you a leasing or financing offer.

Condition: used, mileage: 205,200 km, power: 375 kW (509.86 HP), first registration: 08/2022, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2022, Equipment: ABS, air conditioning, navigation system, parking heater, Lowliner * Full service history ---- ----* 12-speed automatic transmission * Front axle air-suspended * Front axle 8.0 t * Electronic braking system (EBS) with ABS and ASR * Disc brakes on front and rear axles * Electronic parking brake * Secondary oil retarder * Wheelbase 3,700 mm * Driver's suspension seat, comfort * Comfort bed above, wide, levelable * Comfort bed below * Mattress below, PremiumComfort * Shaving mirror * Electric sun blind, 1-piece * LED ambient lighting, driving and living * Electric auxiliary air conditioning * Automatic climate control * Use of residual heat * Hot water auxiliary heating, driver's cab * Additional thermal insulation for driver's cab * Electric sliding/tilting roof, glass version * Trailer socket 24 V, 15-pin * Mercedes star, illuminated * GigaSpace driver's cab, 2.50 m wide, flat floor * Long driver's cab * Driver's cab width 2.50 m * Comfort driver's cab suspension, air-sprung * Air deflector, rigid, with end edge flaps * Sun visor outside, transparent * Compressed air horns, driver's cab roof * Locking system, with central locking * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Heating for driver's seat * Tires 295/55 R 22.5 HA * Tires 355/50 R 22.5 VA/VLA/NLA * Air suspension, rear axle lowliner * Sound system * Navigation system * Tank 660 liters + 75 liters AdBlue * Tank 290 liters * Automatic high/low beam and cornering lights * Headlight cleaning system Cgedpfx Abexybhtsbsn * Engine OM 471, R6, 12.8 l, 375 kW (510 HP), 2500 Nm * Engine version Euro 6, E * High Performance Engine Brake * Safety Pack * Chrome package, interior * Climate Package * Media Package * Economy Package * Comfort Package * Sight Package * Stability Control Assistant (ESP) * Lane Keeping Assistant * Distance Keeping Assistant * Attention Assistant * Traffic Sign Assistant * Active Brake Assist 5 * Active Sideguard Assist * Tire pressure monitoring * Airbag, driver * Cruise control * Actros model generation 5 * MB ATS warranty in accordance with general terms and conditions from first registration 3 years/450,000 km * Refrigerator in drawer under bed * EBS * Without spare wheel ----Sale to businesses only! No guarantee for the information! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to make you a leasing or financing offer.

Condition: used, mileage: 327,100 km, power: 375 kW (509.86 HP), first registration: 04/2021, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2021, Equipment: ABS, air conditioning, navigation system, parking heater, Full service history ---- ----* Electronic Brake System (EBS) with ABS and ASR * Disc brakes on front and rear axle * Electronic parking brake Cjdpfx Abjx Dn Sgjbsgn * Secondary water retarder * Wheelbase 3,700 mm * Driver's air-suspended comfort seat * Upper comfort bed, wide, height-adjustable * Lower comfort bed * PremiumComfort mattress below * Shaving mirror * Electric sun blind, one-piece * LED ambient lighting, for driving and living * Stationary air conditioning, electric * Automatic climate control * Residual heat utilization * Auxiliary hot water heater, cab * Additional cab thermal insulation * Electric tilting/sliding glass roof * Interface for Fleet Management System (FMS) * 24 V, 15-pin trailer socket * Mercedes star, illuminated * BigSpace cab, 2.50 m wide, flat floor * Lockable air deflector with end edge flaps * External sun visor, transparent * Air horn * MirrorCam * Central locking system * Comfort locking system * Light sensor * Rain sensor * Predictive Powertrain Control (PPC) * Mercedes PowerShift 3 * Tyres 315/70 R 22.5 * Tyres 315/70 R 22.5 rear axle * Air suspension, rear axle * Navigation system * 570 litre fuel tank * 60 litre AdBlue tank * 430 litre fuel tank * Automatic high/low beam and cornering light * Engine OM 471, R6, 12.8 l, 375 kW (510 hp), 2,500 Nm * Engine spec Euro 6, D * High Performance Engine Brake * Safety Pack * Chrome package, interior * Climate package * Comfort package * Electronic Stability Program (ESP) * Lane Keeping Assist * Distance Assist * Attention Assist * Traffic Sign Assist * Active Brake Assist 5 * Driver airbag * Cruise control * Actros model generation 5 * Refrigerator in drawer under bed * EBS ----Sale to business customers only! No guarantee for the information provided! Subject to prior sale! Our general terms and conditions apply exclusively! We would be happy to offer you a leasing or financing option.

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, BURKLE MULTIFOILER Press Model M8 + STOLMAT Spray Booth Wall Machine for covering flat and formed MDF furniture components with thermoplastic foils. Basic machine data: • Electrical connection power: approx. 28 kW (without optional components), • Operating voltage: 400 V, 50 Hz, 3-phase, • Control voltage: 24 VDC, • Required air pressure: min. 6 bar, • Air connection diameter: min. 1 inch, • Required air volume: max. 2880 l/min, • Air consumption during pressing process: ◦ 4 bar forming pressure: approx. 720 l/cycle, ◦ Chamber filled to 50%: approx. 360 l/cycle. Operating side: in the direction of feed, right-hand side. Electrical equipment: • In compliance with DIN/VDE (EN 60204) standards, • Electrical documentation according to VDE, • Paint color: machine and control cabinet RAL 7035 light grey, decorative elements RAL 5002 blue. Cjdpfxewfz Nko Abbogn Working materials: • Material applied: ◦ PVC foils 0.30–1.0 mm, ◦ High gloss foils 0.50–1.0 mm, ◦ PET foils 0.35–0.60 mm. • Material processed: ◦ MDF board (smooth or profiled surface), ◦ Board temperature: approx. +18°C, ◦ Board moisture content: approx. 6–8%, ◦ Board density: approx. 750 kg/m³. Technology: • Thermal forming without membrane, • Working area: 1330 x 2430 mm, • Maximum workpiece size: 1250 x 2350 mm, • Minimum foil width: 1400 mm, • Workpiece thickness: 6–35 mm (depending on part geometry). STOLMAT Spray Booth Wall 1. Purpose of the device: • Wall for extracting paint dust and vapors. • For capturing dust generated during spray application of paints and lacquers onto furniture components. • Designed for use with high-efficiency spraying equipment (spray gun). • Filtration efficiency >96%, eliminating the need to clean exhaust ventilation ducts. • Equipped with side covers ("tapacze") to improve extraction efficiency. 2. Technical data: • Dimensions (LxWxH): 2500 x 2130 x 700 mm, • Fan type: duct fan 500, • Fan capacity: max 7500 m³/h, • Max pressure: 400 Pa, • Fan motor power: 1.85 kW, • Voltage: 230/400 V, • Number of fans: 1 unit, • Filtration surface (1st stage – cardboard filter): 4.80 m², • Filtration surface (2nd stage – PS fiber filter): 2.50 m², • Dust filtration efficiency: >96%. 3. Technical description: • The spray extraction wall is made of galvanized steel sheet, 1.5 mm thick. • Wall elements are connected by screwing and sealed with acrylic mass. • The fan is mounted on a wall bracket. • Side covers ("tapacze") made of galvanized steel sheet. 4. Dust filtration parameters: • Cardboard filter (labyrinth type): ◦ Class G3 (DIN 53438, EN 779), ◦ Thickness: 60 mm, ◦ Flow rate: 1200–3800 m³/h/m², ◦ Filtration efficiency: 90–98%. • PAINT STOP filter: ◦ Flow rate: 2500–6300 m³/h/m², ◦ Filtration efficiency: 93–97%.

Year of construction: 2022, operating hours: 2,113 h, condition: excellent (used), functionality: fully functional, Drum dryer Agromech M-829 with a chip-feeding stoker for the furnace. The drum dryer is equipped with a coal furnace adapted for burning wood waste or sawdust briquettes. The entire drying process, as well as the regulation and control of the drying air temperature, is semi-automatic and carried out by the dryer operator. THE DRYER IS BUILT FROM THE FOLLOWING MAIN COMPONENTS: * Coal furnace with thermal insulation, adapted for burning sawdust briquettes and wood waste * Wet sawdust feeder – chain-slat type, pit-installed, smoothly controlled by an electric inverter with a system for smooth dosing of the material to be dried * Insulated loading connector * Thermally insulated drying drum, length 9.00 m * Discharge chamber for dry material * Main dedusting cyclone with feeder * Main radial fan Cjdpfx Aoxzup Tsbbjgn * Electrical control cabinet with temperature measurement and control instrumentation * Inclined screw conveyor for discharging dry material TECHNICAL CHARACTERISTICS: 1. Nominal capacity of the dryer at initial sawdust moisture 40–45% and final 15% – 1,000 kg/h 2. Amount of evaporated water – 1,100 kg/h 3. Maximum thermal power of the solid-fuel furnace – 1,000 kW 4. Maximum temperature of drying air at the drum inlet – 600–650°C 5. Average fuel consumption: * Hard coal or fuel with similar calorific value: 200 kg/h * High-calorific sawdust briquettes: 250–300 kg/h * Wood chips with moisture up to 35%: 250–350 kg/h 6. Total installed electrical power – 17 kW 7. Total weight of the dryer with refractory insulation – 16,500 kg The dryer was manufactured, assembled, and commissioned in November 2022. Operating hours: 2 113

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Manufacturer BARBERAN Model ECOLINE 1400 S Cgedpfx Absrur Txjbon Type of machine Laminating machine Year of manufacture 2007 Readiness dismantled / stored Technical data: Material width max mm 1300 Principle Thermal lamination Film storage Width of film max mm 1300 Material thickness min mm 3 Material thickness max mm 70 Feed rate max m/min 25 Feed rate infinite Machining Single-sided Clamping Steel roller Vacuum Brushing machine Glue application Roller application Storage space 1 Heating device Infrared CE mark

Condition: ready for operation (used), Year of construction: 2016, overall weight: 2,220 kg, total height: 1,835 mm, controller manufacturer: MITSUBISHI, controller model: Meldas 700, This 8-axis Citizen Cincom L20E-2M8 was manufactured in 2016, designed for precision Swiss-type turning come with FMB bar feeder and LNS chip conveyor. It features a main spindle with a speed of up to 10,000 rpm and a counter spindle operating at 8,000 rpm. The machine accommodates up to 37 tools, enhancing its capability for complex machining tasks. It includes a Mitsubishi Meldas 700 controller for efficient operation. Consider the opportunity to buy this Citizen Cincom L20E-2M8 Swiss type turning machine. Contact us for more information. CITIZEN Cincom L20E-2M8 with FMB Bar feeder and LNS chip conveyorThe machine is suitable for efficient turning up to 20 mm in machine is designed to accommodate up to 37 tools for machining complex products. Tool sub-assemblies set:Vertical holder with 5 tools4–7 rotating tools for transverse radial machiningDrilling tools 3–9 for front machining0–4 rotating tools for counter spindle4–10 drilling tools for counter spindleBasic configurationBasic bed: block casting with strong linear guides (thermal and vibration stability)Main spindle: 10,000 rpm, C-axis, Ø passage 26 mm (max. bar Ø20 mm)W1: vertical holder with 5 tools (12 × 12 × 130 mm)3× GSC1310 radial rotating tools ER16 (1 kW, 7,500 rpm)GSE3210 rotating unit adjustable 0°/90° for milling unit (3× GSC1310 ER16)U124B drilling block (2+1) for deep holesCounter spindle: 8,000 rpm, optional C-axis, power 0.75/1.5 kWU153B driven tool unit for counter spindle (0.75 kW) + 4× SAU819 adapters Ø19.05Controller: Mitsubishi Meldas 700 (Windows OS, improved processor, LCD 8.4")Simultaneous machining on main and auxiliary spindlesNew sliding door cover design, space-savingTechnical dataMain spindleMax. turning length: 200 mmThroughput Ø: 26 mmMax. bar Ø: 20 mmSpeed: 200–10,000 rpmPower: 2.2 / 3.7 kWPositioning: C-axis (0.001°)Counter spindleMax. bar Ø: 20 mmSpeed: 200–8,000 rpmPower: 0.75 / 1.5 kWPositioning: C-axisMax. workpiece length in collet: 80 mmDriven toolsSpeed: 200–7,500 rpmPower: 1 kW5 tools (vertical holder) + 4–7 radial + 3 in Z-directionTools5 tools (12 × 12 × 130 mm)3-position drilling block on counter spindle (3× Ø25.4 mm)Back machining holders: 3–6 (Ø19.06 mm)GuidesCollets: E145Guide bushing: Neukomm 22.001Machine ER16 / ER11 Cgjdpfx Aex D Iltobbon Additional equipment • Clamping unit Ø25 mm • Pump 15 bar for rinsing the counterspindle • SAU819 adapters up to Ø8 mm • Transformer 3×400V/3×200V, 10 kW • Swarf conveyor LNS MH-HB • FMB Minimag 20/3200 bar feeder Dimensions Machine Depth 2300 mm

Condition: good (used), functionality: fully functional, mileage: 43,150 km, power: 96 kW (130.52 HP), fuel type: diesel, gearing type: automatic, wheelbase: 3,300 mm, overall weight: 3,400 kg, first registration: 03/2023, next inspection (TÜV): 12/2027, emission class: euro6, energy efficiency: D, color: black, number of seats: 9, number of previous owners: 1, machine/vehicle number: R-WS7697, Equipment: ABS, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking sensors, power assisted steering, second-hand vehicle warranty, sliding door, soot filter, traction control, trailer coupling, winter tires, Special Equipment: TAXI Package Cgjdpoyfngbsfx Abbsn Audio navigation system Ford SD (with Ford SYNC 3), tilting window(s) in the cargo/passenger compartment, rear window wiper, configuration with specific central locking system, alloy wheels 6.5x16 (10-spoke), metallic paint, rearview camera with color display, Seat Package 2: driver's seat (4-way adjustable) – double passenger seat, artificial leather, step under sliding door on the left, tinted rear windows (privacy glass), thermal insulation glazing for cargo/passenger compartment, medium tinting grade. Additional Features: 2nd battery, overhead storage in driver's cab, passenger airbag, driver's airbag, active cornering lights, traction control (ASR), electrically adjustable and heated exterior mirrors, turn indicator integrated in exterior mirrors, flooring: rubber in cargo/passenger compartment (full coverage), onboard computer, headliner trim in passenger compartment, entry lights, electronic brake-force distribution (EBD), electronic traction control, assistance system: hill start assist, assistance system: emergency brake assist, assistance system: crosswind assist, fixed window in cargo/passenger compartment: 2nd row left, fixed window in cargo/passenger compartment: 2nd row right, fixed window in cargo/passenger compartment: 3rd row left, fixed window in cargo/passenger compartment: 3rd row right, 240 A alternator, SelectShift automatic gearbox (6-speed), B-pillar grab handle, front grab handles, lockable glove compartment, rear wing doors with glazing, interior filter: pollen filter, body/build: standard minibus, body variant: standard roof, black radiator grille, steering column (steering wheel) adjustable in height/length, model update, engine 2.0 L – 96 kW EcoBlue CAT, front and rear parking sensors, radio preparation, 4 speakers, wheelbase 3300 mm, full wheel covers, tire pressure monitoring system, spare wheel with identical tires, low emissions according to Euro 6d emissions standard, gear/selector lever in leather, interval wipers, adjustable, H4 headlights, sliding door right side cargo/passenger compartment, front mud flaps, front and rear mud flaps, side protection moldings, seat covers/upholstery: artificial leather, seats in cargo/passenger compartment: 1st row, double tiltable, seats in cargo/passenger compartment: 2nd row, double tiltable, seats in cargo/passenger compartment: 3rd row, single seat right, double seat left, start/stop system, 12V socket in cargo/passenger compartment, partially painted bumpers, style color package, LED daytime running lights, Trend, plastic paneling in cargo/passenger compartment, 4 lashing eyes, additional electric heater, second key with folding remote control.

Condition: used, mileage: 10 km, power: 125 kW (169.95 HP), first registration: 01/2026, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 4,332 mm, next inspection (TÜV): 01/2028, color: white, emission class: euro6, number of seats: 3, loading space volume: 16.8 m³, loading space length: 3,800 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, Wind deflector, air conditioning, central locking with remote control, heated exterior mirrors, electric front windows, onboard computer, cruise control, multifunction steering wheel, light and rain sensor, LED daytime running lights, radio, touchscreen, Bluetooth, hands-free system, Apple CarPlay, Android Auto, thermal insulation glazing, tachometer, driver airbag, anti-lock braking system (ABS), traction control (ASR), cab seats: driver's seat with lumbar support, particulate filter, immobilizer, side marker lights, outside temperature display, power steering, standby and driving refrigeration for fresh goods at 0°C – Zanotti Z380GH+230V, low-frame box body, permitted gross vehicle weight 3.50 t, daytime running lights, gearshift indicator, interior filter: pollen filter, cab seats: mechanically suspended driver's seat, cab seats: driver's seat with armrest, cab seats: multifunctional double passenger seat, cab seats: height-adjustable driver's seat, overhead storage, electronic brakeforce distribution, brake assist, height-adjustable steering column (steering wheel), electronic stability program (ESP), alternator 185 A, body/type: box body, wheelbase 4332 mm, drive type: front-wheel drive, 6-speed gearbox Financing example * Cash price: 58,191.00 euros * Down payment: 11,638.00 euros Cgedpoxyahrefx Abbon * Term: 60 months * Net loan amount: 46,553.00 euros * Effective annual interest rate: 5.99 % * Fixed interest rate p.a.: 5.83 % * Gross loan amount: 53,781.00 euros * Monthly installment: 896.00 euros *Representative financing example of Santander Consumer Bank AG, Santander-Platz 1, 41061 Mönchengladbach for private customers, for which the dealership acts as a credit broker. Subject to creditworthiness. Information also corresponds to the 2/3 example according to § 6a paragraph 3 PAngV. Over 150 transporters and buses in stock. Financing or leasing possible via Santander Consumer Bank, Targo Bank or Auto Europa Bank, we are happy to advise you. This offer is non-binding, no guarantee for specification details. Listed equipment may need to be checked individually. Subject to changes, errors and prior sale. Delivery available for a surcharge. Export license plates available on site. Trade-in of your old vehicle possible. Retrofits possible for: - Tow bars (including up to 3500 kg) - Auxiliary heaters - Monitor for reversing camera and/or navigation via smartphone (Android Auto) - Reversing system with rear camera - Workshop fittings - Cruise control - Retrofitting a tail lift and other individual solutions for your commercial requirements available for an additional charge.

Year of construction: 2018, condition: excellent (used), Complete powder packing system for manufacturing and filling bags up to 10kg. The plant was purchased in 2017/2018 and has only been used very lightly (approx. 60 tonnes in 2024). The system comprises of the following equipment: 1 x Entecon AMC blower conveyor with control box. 1 x Busch vacuum lifting system. Model - SB 0310 D 0H0 UH XX. 1 x Fluidiser with high and low level probes. 1 x All-Fill powder auger filler with agitator and outfeed tube. Model - S10. 1 x Gainsborough Engineering Co. GV4 vertical form, fill and seal bagging machine (2018) fitted with Markem Imaje Smart-Date X60 thermal printer. Sealing bars - 430mm (horizontal) and 600mm (vertical). Current film - 840mm wide. Used to produce 400mm wide bags. 1 x Gainsborough Engineering Co. mobile outfeed conveyor. Infeed - 200mm. Outfeed - 1000mm. 1 x OCS Checkweighers GmbH HC check weigher (2017) to weigh up to 30kg. Type - HC. Weigh table dimensions - 800mm long x 60mm wide. 1 x Declined roller conveyor on height adjustable feet, all stainless steel. Roller bed width - 800mm. Overall dimensions - 1210mm long x 880mm wide x 870mm high (+130mm max). Cgedpfx Abewa Ilhsbsn *Please note - if you require a metal detector for this line then please enquire with us, we can supply a suitable unit* Please contact for more details and to arrange a viewing.

Condition: excellent (used), Used VINOGEL 8 chiller unit, designed for regulating the temperature of wine tanks during the fermentation, stabilization, and storage phases. This model is well-known for its reliability, precise control, and robust construction, meeting the needs of both private wineries and professional facilities. With a cooling capacity of 27,000 frigories/hour, the Vinogel 8 enables effective temperature management, even under demanding climatic conditions. It features a 316L stainless steel coaxial heat exchanger, ensuring full food-grade compatibility and excellent durability. TECHNICAL SPECIFICATIONS - Model: Vinogel 8 - Cooling capacity: 27,000 frigories/hour - Refrigerant: R407C - Compressor: Hermetic - Electrical supply: 3-phase 400 V / 50 Hz - Installed power: 8.45 kW - Rated current: 26.3 A - Product temperature control range: -12°C to +45°C - Permissible ambient air temperature: -15°C to +40°C - Recommended pump flow rate: 60 to 80 hl/h - Hydraulic connections: Ø 40 mm MACON - Structure: Stainless steel frame on wheels - Instrumentation: Control PLC, digital thermostats, HP/LP pressure switches Applications: - Fermentation tank temperature regulation - Temperature control in vinification - Wine thermal stabilization - Winery cooling and temperature maintenance This used Vinogel 8 chiller offers an economical, efficient, and ready-to-use solution for reliable temperature management, without the investment required for new equipment. DIMENSIONS - Length: 1110 mm - Width: 750 mm - Height: 1480 mm - Weight: 220 kg Compact and mobile design for easy installation in the cellar and convenient transfer between tanks. ANNEXES Cgodsyg I Dcspfx Abbsn - 6-month warranty - CE compliant

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ Cgedpefz Anpjfx Abbon 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2026, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ Cgedpfsfy T H Ijx Abben 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ Cgjdeyg H Dzopfx Abbsn 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: LP-S08-142F, overall weight: 2,500 kg, nominal power: 5 kW (6.80 HP), Equipment: documentation/manual, Speed: 10 - 30 bags/min, depending on bag volume the speed may vary from these figures. Bag types: Pre-made stand-up pouches, flat pouches Cgjdpfx Abeyg Hmcobon Bag size: Width 180 - 400 mm, bag length 120 - 500 mm Sealing: Sealing with constant heat (special sealing bar) Bag magazine: Stacking magazine Change of bag width: Gripper sets can each be adjusted via a motor The machine is offered without dosing system A labelling system with thermal transfer printer can be integrated. However, it is not included in the offer. See separate offer (€ 7,400) Video available on request.

Condition: used, mileage: 41,000 km, power: 355 kW (482.67 HP), first registration: 04/2025, fuel type: diesel, overall weight: 18,000 kg, gearing type: automatic, emission class: euro6, Equipment: electronic stability program (ESP), soot filter, Vehicle number: 540083 Cgedow A U Riepfx Abbsn Accident-free, service book maintained, non-smoker ---- ASSISTANCE SYSTEMS * Lane Change Warning System * Hill Start Assist ENGINE, TRANSMISSION & CHASSIS * Traction Control System (ASR) INTERIOR * Driver’s seat armrest LIGHTING & VISIBILITY * High Beam Assist * LED Daytime Running Lights Other Features -----Colour/Paintwork----- Chassis colour: Anthracite Grey * Cab colour: E0967MERD ROUGE FLAMME -----Tyres/Wheels----- Goodyear * F1,315/70R22.5GO AFMAXS 156/150 L Steering ABA -----Equipment/Special Equipment----- XG+ Cab * Cab air suspension * LED headlights, cornering and fog lights * LED skylights * Two LED headlights for the rear cab wall * Windscreen with solar protection film * Laminated glass with solar protection film * DAF Digital Vision System * DAF Corner View * Central locking, 2 keys, 2 remotes * Extended side fenders, one side foldable * Side skirts with top/bottom extension * Leather steering wheel, Exclusive * Interior trim colour scheme: Exclusive * Cab interior trim: Argenta * Driver’s seat: Luxury Air * Passenger seat: Luxury Air * Armrests on both sides of the passenger seat * Refrigerator and drawer * Xtra Comfort mattress + reinforced lower bunk * Upper sleeper bunk * Curtains: thermal, without partition curtain * LED interior lighting: luxury * Automatic cab climate control * Integrated stationary air conditioning * Stationary heater with heat pump and timer * Electric roof hatch * ECAS remote control with extended functions * FMS connector, extended and pre-installed * Digital tachograph, VDO 1C, Version G2V2 * DAF Infotainment Luxury Plus, Exclusive speakers * Antennas: DAB-prep radio, 2x mobile, GNSS * Predictive Cruise Control * Airbag (driver) and 2 belt tensioners * Speed limit recognition * DAF Drowsiness Detection * Electronic Stability Control (VSC) * Reversing warning system * DAF Side and Turn Assist * Alcohol interlock, prepared * Axle load monitoring * Eco-Fuel * Automated TraXon gearbox, 12-speed * Mechanical differential lock * MX engine brake * Two-cylinder compressor without clutch * EAS unit right, rear overhang, 85-l AdBlue tank left fender * Steps: 765 mm left + 430 mm right, height 620 mm * Fuel tanks left and right * LED rear lights * JOST JSK42 fifth wheel, cast iron, 150 + 40 mm * Trailer electric connector 24V/15-pin: 15-pin + EBS * Alternator 130 A, batteries 2 x 210 Ah AGM * Additional cab insulation * Plus warranty – vehicle – 3 years – 500,000 km * Efficiency Plus Package XG+ * Climate package --- Subject to prior sale and errors excepted. The vehicle description serves only for general identification and does not constitute a warranty in the legal sense. For the exact scope of equipment, please contact our sales team. Please get in touch with us.

Condition: used, mileage: 146,400 km, power: 184 kW (250.17 HP), first registration: 06/2022, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space volume: 43 m³, loading space length: 7,300 mm, loading space width: 2,470 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), tail-lift, Dhollandia tail lift 1,500 kg, 1,700 mm, underride guard. * Thermo King T-1000R refrigeration unit, diesel + 380 V, temperature recorder. ----Kiesling deep-freeze box body with 2-part thermal curtain at the rear. ATP/FRC certified. ----* Connectivity board module (Rio Box) * 12-speed automatic transmission * Underride tail lift * Box body with rear doors and tail lift * MAN EasyStart (hill-start assist) * MAN EVBec (electronically controlled exhaust valve brake) * MAN Advanced Media System with 7-inch navigation * Rear axle differential lock * Traction control system (ASR) * Air-suspended rear axle * Anti-lock braking system (ABS) * Emergency brake assist (EBA) * 2-line trailer brake (EC compliant) * Electronic stability program (ESP) * Disc brakes * Full braking assist * Battery main switch * Lane departure warning (LDW) * S cab (short) * Roof hatch in cab * External transparent sun visor * Electrically adjustable and heated exterior mirrors * Electric window lifters for driver and passenger door * CC cab – the compact version (narrow, short, standard height) * Immobiliser (transponder) Cgjdpfx Abjxbkd Tebsn * MAN TipMatic 12 12 OD transmission * Automatic climate control * Heated driver’s seat * Reverse camera with monitor in cab * 180-litre tank * Engine Euro 6 version * Cruise control * Engine with AdBlue system * Aluminium loading floor * Jaw-type trailer coupling * Air-suspended driver’s seat * Driver comfort package Plus * Load securing rails * Central locking * EBS * Without spare wheel ----Sale to business customers only! No guarantee for information provided! Subject to prior sale! Our general terms and conditions exclusively apply! We will be happy to provide you with a leasing or financing offer.