Used Textile Cleaning for sale (6,800)

Condition: used, Year of construction: 2018, Technical specifications: Processes: Washing, rinsing, drying Power supply: 3x400 VAC +/- 5%, 50 Hz + N + PE Compressed air connection: 6 bar Fjdpfowf U Ruox Aa Eefw Power consumption: 76 kVA Machine at a height of 1.6 m: n/a Vibrations: none Maximum payload: 200 kg Wash tank: 900 l Rinse tank: 900 l Oil separator: 200 l

Year of construction: 2003, condition: used, Technical details: rated capacity: 175 kVA flow rate: 100 m³/h revolution per minute: 1500 U/min connection voltage: 400 V dimensions L x W x H: Container: 3,0 x 2,6 x 2,6 m Gas purification plant incl. container Application: For purification of sewage gases from organic silicon compounds and hydrogen sulfide. Ffjdpfeu Nvb Iox Aa Esw Gas pressure boosting plant make Muche GmbH Scope of delivery ivated carbon filter Cooling Danvoss; air consumption 2.800 m³/h; refrigerant R 134a Heat exchanger Renzmann&Grünwald Condenser ID Compressor MTZ22-4VI control cabinet incl. documentation, for sale as is. *

Condition: new, connected load frequency 230 V battery 24V / 200Ah Brush diameter 510 mm tank capacity 50 / 50 Liter weight 90 kg range L-W-H 1,0 x 0,6 x 1,0 mm RTE Floor Cleaning Machine: - with drive system - battery charger - working capacity 2000 m²/h - suction width: 850 mm - cleaning width: 510 mm Fsdeynnkropfx Aa Ejfw - fresh/wastewater tank volume: 55/60 L

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 Ffodofrztfspfx Aa Eew Contents 600 l The containers are chip bins !!! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets.

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 Contents 600 l The containers are chip bins !!! - powder-coated in RAL 6011 green. - tilting device - Drainage device Ffodpshx Halofx Aa Eow - Anti-tip device and forklift pockets.

Condition: used, Year of construction: 2009, Dust removal brush with spiral brush, Fedpfx Aajuulpqe Eefw suitable for installation on an existing transport system. - Manufacturer: Venjakob - Height adjustable via a hand wheel - Working width: 1,300 mm - Total width: 2,450 mm of the brush unit - In stock in Blomberg - Voltage/Hz: 400/50 - Extraction system required on site - Extraction nozzles, 2 pcs - Diameter: 120 mm each - Volume flow: approx. 2,000 m²/h - Machine without control cabinet and frequency converter (Optionally available) - Without roller conveyor, only the brush machine

Condition: used, Year of construction: 2024, The control of the dust extraction system is switched on and off via 2 sensors. Suitable for installation on an existing transport system Sword brush Micro-moistening of the brush elements by means of an antistatic moistening nozzle from Riepe. Moisturisation can be finely dosed via this nozzle. Cleaning the product surface using Sword Brush technology The dust particles are picked up by the brushes and removed by the suction system. A rotating squeegee and compressed air nozzles ensure constant cleaning of the brush systems. Power channel The power channel contains 14 rotating double power compressed air nozzles, which remove particles and dust from the material surface and from recesses. The suction system removes the loosened particles. Technical data: Power: 0.5 kW Self-cleaning system via the rotating brush Ffsdpfeun N Auex Aa Ejw Dust extraction: 2 x D120 mm at the top + 2 x D80 mm on the side. Motorised height adjustment Material of the panels to be cleaned: MDF, chipboard with melamine Workpiece length: min. 400 mm Panel width: max. 1,350 mm Workpiece height: max. 80 mm Feed speed: max. 35 m/min Removal standard: workpiece surface dust-free Important: Glue residues are not removed. Size of the machine: Width: 2,280 mm Installation length: 500mm

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 840 mm, total length: 1,040 mm, total height: 900 mm, maximum load weight: 200 kg, heating capacity: 6 kW (8.16 HP), tank capacity: 275 l, warranty duration: 1 months, type of input current: three-phase, inner dimension height: 420 mm, inner dimension length: 700 mm, inner dimension width: 500 mm, compressed air connection: 7 bar, input voltage: 400 V, input frequency: 50 Hz, WJS MTS Tool Washing Machine - Features an automatic system for cleaning tools of resin and other residues. - The carrier plate holding multiple tools is moved up and down in the cleaning bath, ensuring that all surfaces, channels, and recesses are cleaned quickly and thoroughly. - Additionally, two ultrasonic modules are utilized to significantly reduce cleaning time. - The system operates quietly and is both user- and environmentally-friendly, as only water-soluble cleaning agents are used and the cleaning process takes place within a closed unit. - The system is fully automatic and requires no supervision, saving time and money while ensuring tools are cleaned perfectly and gently. The WJS MTS-U system can also clean machine parts and other materials. - Suitable for all alkaline and acidic agents, as well as solvent-based cleaners. Fedpfx Aasym N Uie Esfw Ex works price Delivery time: 10-12 weeks One machine available from stock, subject to prior sale.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale are 2 industrial air filters of the Air-Fresh-Service brand and type F-V15D The units are in very good condition and fully functional Units can be purchased individually or as a package, individual prices will be quoted on request Technical data: Year of construction: 2016 V/Hz: 400/50-60 A1,9-1,5 kW: 1.15 Structure: 2 filter chambers with 3 filters each On request, transport and loading can be organized throughout Europe for an additional charge. Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Ffodpfx Aot Tyqmea Eew Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: excellent (used), I am selling in good condition the works of Schön 8LS. Ffjdpfxevbwfzo Aa Ejw

Condition: refurbished (used), 100% REVISED IN 2025 Fjdpfx Ajymarfoa Esfw PROCESSING CENTRE FOR DEBURRING & CLEANING OF SHORT TUBE RSA RASAPLAN NV & RASACLEAN SK Scope of supply: 1. RSA automatic loading system for short pieces 2. Deburring system RASAPLAN N00; 3. RSA cleaning system RASACLEAN SK for short pieces Complete line RSA for short size/diameter tube with loading , deburring, washing. Thickness: 3 mm Pieces length / fixed lengths: 40 – 120 mm Length tolerance: 0,5 mm Deburring system: RASAPLAN NK V 500

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, The machine is almost new, following company liquidation. Fsdpfsyl Sarsx Aa Esfw

Year of construction: 1998, condition: as good as new (ex-display), Wire chemical treatment cleaning unit Fsdpfefhw Uyex Aa Esfw FULLY refurbished with ALL brand new parts except chassis. Please contact us for more details. Thank you!

Condition: used, functionality: limited functionality, In this offer you purchase a used digital on demand textile printing system "Kornit Storm HD6" Object of sale: 1 x Kornit Storm HD6 The system boots up Print heads need to be replaced Condition: This offer is for a used device, which may show signs of use Fedpfxjwlnidj Aa Eofw (minor scratches or yellowing). Packaging and shipping: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: reconditioned (used), Year of construction: 2005, URBAN Corner Cleaning Machine Fodpfx Aaoyl Hu Ds Eofw Type: SV430; Year 2005 Used, in very good condition, technically overhauled Top machining tools: - Drilling and milling tool - Smooth surface scraper - V-groove surface scraper - Inside corner knife Bottom machining tools: - Drilling and milling tool - Smooth surface scraper - V-groove surface scraper - Inside corner knife

Condition: new, New electric scrubber-dryer, floor cleaning machine KREMER type KR-FL50A Year of manufacture: 2024 – unused, from stock Theoretical area coverage: 2000 m²/h Working width: 510 mm Cleaning brush diameter: Ø 510 mm Brush speed: 175 rpm Squeegee width: 850 mm Clean water tank capacity: 50 liters Dirty water tank capacity: 50 liters Noise level: 66 dBa Climbing ability: 2% Battery voltage: 24 Volts, 100 AH - Battery charger 24 V Fjdpfsvvww Tjx Aa Ejfw - Battery 24 V, 100 AH - One cleaning brush - Two separate tanks - No traction drive, the machine is manually pushed Machine length: 1200 mm Machine width: 510 mm Squeegee width: 850 mm Machine height: 1350 mm Unladen weight: 160 kg Brand new – in original packaging – unused, from stock

Condition: new, New electric scrubber dryer, floor cleaning machine DAEWOO model DAFL50A Year of manufacture 2024 – unused from stock Theoretical area coverage: 2,000 m²/h Working width: 510 mm Cleaning brush diameter: Ø 510 mm Brush speed: 175 RPM Squeegee width: 850 mm Clean water tank capacity: 50 liters Dirty water tank capacity: 50 liters Noise level: 66 dBa Climbing capacity: 2% Battery voltage: 24 V, 100 AH - 24 V battery charger Ffjdpfx Aasxr N U Ej Esw - 24 V, 100 AH battery - one cleaning brush - two separate tanks - without drive motor, the machine is pushed by hand or moves itself via the brush drive Machine length: 1,200 mm Machine width: 510 mm Squeegee width: 850 mm Machine height: 1,350 mm Unladen weight: 160 kg New – in original packaging – unused from stock

Condition: new, Year of construction: 2026, total width: 680 mm, total length: 780 mm, total height: 670 mm, maximum load weight: 15 kg, tank capacity: 105 l, warranty duration: 12 months, inner dimension height: 400 mm, inner dimension length: 600 mm, inner dimension width: 500 mm, Tank dimension: (lxwxh) 900 x 600 x 500mm Total dimension: (lxwxh) 1.080 x 780 x 750mm Wash tray outside dimension: (lxw) 840 x 540mm Loading cap. 60kg Filling volume cap. 240 Liters Ultrasonic Power: 12KW two ultrasonic activators, sidewards mounted Fodpjx E S H Tofx Aa Ejfw heating power: 6KW, 30-70°C Electrical power 400V/50Hz Drainage valve, overflow valve, electrical heating, Generator with booster function, Frequency 40kHz, niveau control, incl. manual cover, incl. tray without optional lifter function

Condition: used, Year of construction: 2020, operating hours: 6,162 h, machine/vehicle number: 958-167, Application version: 6.9.3.9, PLC version 20200618.957, with control PC, flat panel display, handheld scanner, keyboard and mouse (without add-on monitor) Fedjyidl Eopfx Aa Esfw

Condition: used, Year of construction: 2020, machine/vehicle number: 958-168, Operating hours: approx. 6,000, currently not in operation, print heads have been preserved, application version: 6.9.3.9, PLC version: 20200618.957, includes control PC, flat screen monitor, hand scanner, keyboard, and mouse. Fedpfx Ajyidl Soa Eefw

Condition: used, Year of construction: 2021, operating hours: 4,691 h, machine/vehicle number: 964-005, Application version: 7.80.4.1, PLC version 20230531.96, with SUPERMICRO control PC, flat screen, handheld scanner, keyboard and mouse (without tablet PC and monitor assembly) Fodpfx Asyidlxea Esfw

Condition: used, RSA RASACUT SC 3000 – Complete automatic tube cutting, deburring, measuring, cleaning & drying line This is a complete RSA high-performance tube processing line for continuous production, from stock tube to finished fixed-length tube sections up to 3,000 mm. The system integrates the full workflow: Bundle Loader → Cutting → Deburring → Measuring → Cleaning (washing) → Drying, with automatic transfer between stations. KEY FEATURES · Fixed length cutting up to 3,000 mm · Complete RSA line: Bundle Loader + Cutting + Deburring + Measuring + Cleaning (washing) + Drying · Automatic tube singulation from bundle magazine · Servo-controlled saw forward feed with programmable cutting parameters · Automatic interlinking between stations (no manual adjustment required) · Deburring with 360° rotation, inside + outside edges · 100% length measuring with automatic rejection · Integrated washing and drying system for finished tube preparation · Siemens control: S7-300 + OP17 · Supplied with a large set of wrap-around jaws TECHNICAL DESCRIPTION 1. Bundle loader magazine The tube bundle is loaded by crane or forklift into the magazine. The system automatically singulates the tubes and feeds them into the roller infeed, allowing continuous production from stock tubes up to 8,000 mm. 2. Cutting | RSA RASACUT SC 3000 Automatic sawing unit with servo-controlled saw feed and electronically controlled length stop. Tubes are clamped and cut to the programmed fixed length, with programmable cutting parameters for repeatable cutting results. 3. Deburring | RSA RASAPLAN XY 3000 Automatic end deburring system using high-performance brushes on both sides. Each tube rotates 360° during brushing, enabling simultaneous inside and outside deburring of both end faces. Automatic adjustment is performed from the central control. 4. Measuring | RSA RASACHECK 3000 A Integrated length measuring station providing 100% control of finished parts. Workpieces outside the programmed tolerance limits are automatically rejected, ensuring only compliant parts proceed to the next stages. 5. Cleaning | RSA RASACLEAN ET 3000 Washing system designed for thorough removal of swarf and dirt particles. Workpieces pass through a sealed washing zone where the cleaning medium is applied under pressure and contaminants are collected in a swarf filter. 6. Drying | TURBODRY Hot-air drying station with adjustable air volume and temperature. Removes droplets and condensation after washing, delivering dry tube sections for downstream handling. 7. Tooling | Large set of wrap-arount jaws Supplied with a large set of wrap-around jaws covering multiple tube diameters, enabling quick changeovers without additional tooling. WORKING RANGE · Round tube diameter: 10 to 90 (101) mm · Wall thickness: 0.6 to 6 mm · Stock length (incoming tubes): 8,000 mm · Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) · Tube weight: Max.10 kg/m · Length/diameter ratio: 2:1 · Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Can be inspected in production (seen running). Contact us for a quote, full details and inspection arrangements. Fedpfeyllvyox Aa Eefw Round tube diameter: 10 to 90 (101) mm Fixed cut length (finished parts): 150 to 3,000 mm (Up to 2,000 mm for Ø 10–14 mm) Length tolerance: Ø10–49 mm ±0.2 mm | Ø50–74 mm ±0.25 mm | Ø75–90 mm ±0.3 mm Wall thickness: 0.6 to 6 mm Tube weight: Max.10 kg/m Length/diameter ratio: 2:1 Stock length (inc...

Condition: used, Year of construction: 2015, Recycling system for recovering and separating plastic and rubber products from textile reinforcements, such as various types of rubber hoses, PVC, tarpaulins, banners and other plastic materials in which textile reinforcement occurs. The system cooperates with a granulation group and a separation system. Hourly capacity: 50 - 80 kg/h Infeed dimensions: 270 x 120 mm + fi 80 mm Blade length: 3x2 + 2x2 Rotor diameter: 250 mm Cutting length: 600 mm Engine power: 22 kW Dimensions: 3200 x 3000 mm Height: 2500 mm Weight: 1000 kg Year of production: 2015 Technical condition: used machine, all engines in working order. No top cap with dimensions: 400x300 mm used for loading the product. Ffodpfxswpkw Es Aa Esw Full and original technical documentation available. .

Condition: excellent (used), functionality: fully functional, Industrial high-performance sheet pan cleaning machine Jeros Model: 9029TS with 9020 Capacity: 800–1000 trays/hour With oiling system / for external oil container Touchscreen control for automatic tray cleaning Premium stainless steel construction Connection: 400V, 16A CEE plug Used device, cleaned Options: Maintenance contract Service package Delivery service Training / commissioning Visit our extensive machine warehouse! Ffodpfoxwtnyex Aa Ejw

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 10.00.00.24, The Mohn Sole-Master Highline is a sole cleaner that cleans soles, sole edges, and shoe leather. A horizontally positioned rotating brush with two side-mounted disc brushes ensures trouble-free cleaning of soles and sole edges. The leather of the shoe upper can also be systematically cleaned using the brush. The rotation of the brush roll is activated by a manual button. A nozzle sprays both the sole and edge brushes with cleaning agent and water simultaneously. The dosage of the cleaning agent is adjustable. The unit features a hygienic design, is suitable for wall mounting (optionally with legs), and has an adjustable dosing unit (not available for the Sole-Master Dry type). The Sole-Master Dry model operates without water connection/drain, features a dirt drawer and an integrated canister holder. Fsdpfx Aasyk T Hwe Ejfw