Used Tensile Test for sale (10,202)

Year of construction: 2006, condition: ready for operation (used), Delivery head: 0-9.5m, pump speed: 6000/min, water temperature: 10-50°C, tank volume: 8m³, max. delivery pressure: 25bar, with documentation, on-site inspection is possible. Njdpjrn Ta Rsfx Ahvecp

Condition: ready for operation (used), Two three phase Spitzenberger grid simulation systems for line conducted EMC tests and grid simulation are available. Output power: 30kW, voltage range: 135V-270V, max. frequency: 5kHz, power stages: PAS 4 quadrant voltage amplifier, signal source: SyCore arbitrary generator, analyzer: ARS reference analyzer, network impedance: AIP. Documentation available. An on site inspection is possible. Ncjdpfox El Ansx Ahvop

Condition: ready for operation (used), Year of construction: 2005, A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible. Nsdpfoxltu Nex Ahvecp

Year of construction: 2019, condition: ready for operation (used), A Niehues hydraulic testing system is available. 1) TP pump, motor power: 315kW, liter capacity: 13.94l-41.83l/min, max. operating pressure: 25bar, nominal delivery head: 28m. 2) NKG pump, motor power: 315kW, liter capacity: 5.61l-16.83l/min, max. operating pressure: 16bar, nominal delivery head: 80.7m. 3) Tank, volume: 11400l, permissible pressure: 0.5bar-10bar, operating pressure min./max.: 1bar-5.5bar, medium: drinking water without additives, temperature min./max.: -10°C-50°C, permissible load rating: 1000. Njdpfet Daq Uox Ahvjcp

Condition: good (used), -Testing device for electrical equipment -each with isolation transformer -Number: 7 available -Price: per piece Ncjdeb A Ivzepfx Ahvep

Year of construction: 2008, condition: excellent (used), Robot cell for leak testing consisting of: Ncsdpfxen D D E Tj Ahvop Robot FANUC LR Mate 200iC/5L - 2008, Table for measurements, equipped with 8 light curtains, 2 pieces of Innomatec equipment for leak testing, type LTC - 502. The cell has a safety system and CE

Condition: excellent (used), Year of construction: 2007, max. wheel diameter 400 mm weight of the machine ca. 4 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : Ncsdjxvdryspfx Ahvop KLINGELNBERG Single- and double-flank rolling test machine with structure-borne sound testing model R 30 year 2007 _____ Workpiece outer diameter min. / max. 36 / 300 mm Center distance between workpiece and counter wheel 135 - 290 mm Spindle speeds max. 3.000 rpm Drive torque max. up to 2196 rpm 20 Nm Drive torque max. 2196 – 3.000 rpm 14,7 Nm Spindle drive 4,62 kW Total drive approx. 10 kW - 400 V - 50 Hz Total weight approx. 4.000 kg Accessories / Special Features: • The machine is a universal rolling tester designed for the following testing procedures: o Single-flank rolling test o Double-flank rolling test o Structure-borne noise testing in single and double-flank contact o Helix testing in double-flank contact • WINDOWS PC control for measurement data acquisition and analysis with the NoisyS32 testing software • SIEMENS control panel for operating the machine and evaluating the test cycles • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating instructions • Unfortunately, the license dongle for activating the measurement software is currently missing. We hope to receive it from the supplier of the machine. Condition : very good condition ! Almost unused ! Soon : Please click here to view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading We always have a large selection gear machines – CNC or conventional - available. Please let us know your requirements.

Condition: excellent (used), CTS Type: CSR-60/810/S Temperature & Climate Air Conditioning Unit, Air-Cooled CTS Climate Test System CSR-60/810/S | –60°C to +170°C 39.6 kW | Test Chamber 1200 L Description: For sale is a professional climate and temperature testing system manufactured by CTS GmbH, comprising a conditioning unit type CSR-60/810/S and an external test chamber (1200 liters). The system is ideally suited for industrial, R&D, and laboratory applications, e.g., for automotive, electronics, component, and material testing. It enables precise temperature and climate simulations across an extremely wide operating range. This is a professional climate and temperature conditioning system from CTS GmbH, including: • Conditioning unit (CSR-60/810/S) • External test chamber (1200 L chamber) The system is designed to supply external test rooms or chambers with precisely controlled temperature and humidity. Typical applications include industrial, automotive, electronics, material, and component testing (environmental simulation, stress screening, endurance testing). Technical Data (from nameplate & manual) General: Manufacturer: CTS GmbH, Hechingen Type: CSR-60/810/S Year of manufacture: 07/2019 Temperature & Climate Temperature range: –60°C to +170°C Humidity range: 10% to 80% RH Dew point range: +5°C to +74°C Nsdpfx Aoya Ev Njhvocp Electrical Data: Rated voltage: 400 V / 3-phase / N / PE / 50 Hz Rated power: 39.6 kW Rated current: 64.9 A Recommended fuse protection: 80 A slow-blow Connection type: Hardwired Refrigeration System Refrigerants: Pre-cooling stage: R452A (17.0 kg) Cooling stage: R23 (5.3 kg) Compressor: Bitzer (cascade system) Protection class: Conditioning unit: IP54 Test chamber: IP22 Dimensions & Weight: Conditioning unit: Dimensions (W x D x H): approx. 1,200 × 1,100 × 2,200 mm Weight: approx. 1,200–1,500 kg 1200 L Test Chamber: Dimensions (W x D x H): approx. 1,600 × 1,400 × 1,600 mm Weight: approx. 600–800 kg Total system weight: approx. 1.8–2.3 t Buyer Safety Information! The following steps are always carried out on our offered chambers before sale: 1. Functional check and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (subject to change and errors in technical data and specifications!) Additional questions can gladly be answered over the phone.

Condition: used, Year of construction: 1991, max. wheel diameter --- mm gear width --- mm Nsdpsya Eqajfx Ahvecp max. module --- min. module --- Control --- total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m

Condition: excellent (used), Primus Engineering Type: DST 350 This test device was designed to carry out IP protection class tests “dust” according to e.g. DIN 40050 Part 9 and DIN EN 60529. The test device is intended for testing technical components under the influence of dust and negative pressure within the limits specified in the technical data. Operation / HMI Control panel with screen and buttons Manual controllers Stored test sequences Integrated vacuum circuit with flow measurement Ncsdert U Nuopfx Ahvep Technical data: Total electrical output: Max. 5 KW Connection voltage: 400V/50HZ 3-Ν/ΡΕ (16AEEC socket) Dimensions: Width approx. 920 mm Depth approx. 710 mm Height approx. 1,770 mm Dimensions of test chamber: Width approx. 700 mm Depth approx. 650 mm Height approx. 770 mm Volume approx. 350 I Mass: approx. 200 kg Vacuum: 0 to -100 mbar Suction air flow: 0 to approx. 5 l/min Working climate range: Temperature: +12 °C to +30 °C Humidity: 25% rel. H. to 75% rel. F., non-condensing Protection class tests according to DIN 40050 Part 9 and DIN EN 60529 (VDE 0470 Part 1) Dust test: Dust-protected ΙΡ5Χ and IP5KX Dust-tight ΙΡ6Χ and IP6KX with and without vacuum Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We are happy to answer any further questions you may have over the phone.

Condition: excellent (used), Year of construction: 1975, Breaking device . bar material dia. 10 - 45 mm bar material stranggepreßte NE-Stangen weight of the machine ca. 3 t Bending and breaking device simple and sturdy device to detect internal flaws in extruded non-ferrous metal rods +++++ Please note: Njdeit Ev Tspfx Ahvecp The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 1997, Technical details: max. wheel diameter: 5 - 350 mm max. module: 20 weight of the machine ca.: 0,8 t Ncjdpfxsx Uzvvj Ahvsp min. module: 0,5 dist. between centers: 5 - 750 mm table diameter: 260 mm z-axis: 600 mm y-axis: 185 mm max. helix angle: 45 °

Year of construction: 2018, condition: good (used), Testing equipment used to ensure the quality and production output in a serial process for gearboxes assembly plant. Equipment contains universal robot, camera system and his own control unit. Equipment could be relearned in order to ensure the demanded operations of the client. Ncedpfx Aheh D Ezgevop

Condition: excellent (used), Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Materials Testing Machine 20 kN Tensile & Compression Testing testXpert III For sale is a high-quality Zwick / Roell materials testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. Control is via PC using Zwick/Roell testXpert III software (data carrier & documentation included). Technical Data: Rated test force: 20 kN Test direction: tensile & compression Power supply: 230 V / 50–60 Hz / single-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical data (according to documentation & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: tensile & compression Max. test frequency: 0.5 Hz Crosshead: servo-electric Nsdpfx Ahox Up Igevjcp Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight: Total height: approx. 1,545 – 2,114 mm (depending on crosshead position) Total width: approx. 856 mm Total depth: approx. 650 mm Working area width: 440 mm Weight: approx. 150 kg (base unit) approx. 180 kg with typical configuration Electrical Data Power supply: 230 V AC Phases: single-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Plug: Schuko (CEE 7) Measuring & Control Electronics: Internal data acquisition: 500 Hz Data transmission to PC: adjustable 10–100 Hz Interface: RS232 (COM) Electronics housing protection class: IP32 Important note: 'The table shown in the photos is not included in the sale.' Condition: used Scope of delivery: (see picture) - Zwick / Roell materials testing machine (20 kN) - Electronics unit - PC workstation (monitor, PC – please see photos for condition) - 2 measurement modules (Delock units) - Zwick/Roell testXpert III software (data carrier) - Original operating and technical documentation - Various connection and interface cables (Specifications are subject to change and errors excepted!) If you have any questions, we will be pleased to assist you by phone.

Condition: excellent (used), functionality: fully functional, A Bareiss digital hardness tester in good, used condition is for sale, as shown in the pictures. Technical data: • Manufacturer: Bareiss Prüfgerätebau GmbH • Model: Digi-Test II • Hardness testing method: Shore A - D - IRHD M • The modular digi test II offers you maximum flexibility in hardness testing of elastomers, polymers, soft elastic materials, composite materials, and foams. In just a few simple steps and without tools, the numerous measuring devices can be exchanged according to Shore, VLRH, or IRHD, allowing you to quickly switch between different measuring methods. The hardness measurements are fully automatic, reducing user influence to a minimum. A connected electronic unit recognizes the selected measuring device, automatically switches to the appropriate measuring method, and guides you through the test sequence via the user-friendly menu. • With many accessories, operating instructions, drivers • Condition: Used, functional Insured shipping costs: €30 You will receive an invoice with VAT shown separately. Viewing/collection is possible by arrangement in 42855 Remscheid. Sale from location 42855 Remscheid, free loading. Subject to errors in technical data and prior sale. Ncedpfx Aeyfmm Tjhvep Storage location: Shelf 1

Condition: excellent (used), Vötsch Type: VC³ 4018/S Vötsch VC³ 4018/S Climate Test Chamber – Li-Ion CO/CO₂ −42 to +150 °C 400 V Air-cooled For sale is a temperature and climate test chamber from the renowned German manufacturer Vötsch Industrietechnik GmbH, model VC³ 4018/S, year of manufacture 2012. The unit is specifically equipped for testing lithium-ion batteries and features CO monitoring as well as CO₂ inertization for enhanced operational safety. Important Note: Due to these safety features, the test chamber is software-limited to a temperature range of −42 °C to +150 °C. The chamber is ideally suited for: - Li-Ion battery testing - Electronics and assembly testing - Temperature and climate stress tests - Development and quality assurance tasks Technical Data: Test chamber dimensions: Width 580 mm x Depth 450 mm x Height 750 mm External dimensions: Width 870 mm x Depth 1550 mm x Height 1800 mm Test chamber volume: 190 liters Feed-throughs included as standard: R1: Ø 125 mm L1: Ø 50 mm Data for temperature tests: Temperature range: -42°C to +150°C Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating 4 K/min Cooling 4 K/min Max. heat compensation: 2300 W Data for climate tests: Temperature range: +10 to +95 °C Dew point range: -3 to +94 °C Humidity range: 10 to 98 % RH Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Temporal humidity deviation: ± 1 to ± 3 % RH Heat compensation: 400 W Operating data: Test chamber lighting: Halogen bulb 2 x 24V, 50W 3/N/PE AC 400V ±10% 50 Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-404A Weight: 470 kg Important Safety Information for Buyers! The following servicing steps are performed on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If required, new refill with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run. Condition: Used Scope of delivery: (See image) (Specifications and technical data are subject to change and errors are excepted!) Nedpox Slm Hjfx Ahvocp If you have further questions, we are happy to assist you by phone.

Condition: used, Year of construction: 2000, Sold for parts, ADU card missing. Automatic tablet testing system - Laboratory measuring equipment - Tablet tool Enables testing of: Hardness Diameter Nodox Rz I Depfx Ahvocp Thickness Weight Precision balance Sartorius WZ64S Scale : 10 à 50 g Unit : mg / 0,5 mg / 0,1 mg adjustable Thickness Drive: stepper motor. Measuring principle: linear potentiometer. Unit of measurement: mm or inch. Tolerance: +/- 0.1 mm Hardness Drive: stepper motor. Measurement: load cell (lmz) Measurement principle: dynamometric gauge Unit: N, Kp or Sc Diameter Drive: stepper motor. Measuring principle: stepper motor. Unit of measurement: mm or inch. Scale: 3 - 18 mm / 3 - 30 mm (manual) Tolerance: +/- 0.1 mm Tension : 100 / 240 V, 50Hz / 60 Hz The UTS is a universal, fully automated testing system developed for use in industry. This tool is the approved model of a series of test systems that have been tested over many years. It was developed in close collaboration with the pharmaceutical industry. The UTS 4.1 can be used to test round, oval, square and oblong tablets, as well as many special shapes. For delicate oblong tablets, the proven oblong centring system (OZB) can be integrated. All parts requiring cleaning can be removed quickly and easily without any tools. The test system can be supplemented with various options, such as a distributor and/or sample collector with a different number of stations. Use the UTS as a laboratory tester or an online control device connected to a tablet press. Sampling can be triggered either in the production machine or using the TTS11 software.

Condition: good (used), test mandrel, tool holder, milling holder, milling tool -Manufacturer: Bahmüller, boring bar Ncsdpfxovz Urxj Ahvjp -Length: L= 158.406 mm -Radius: R= 19.937 mm -Recording: HSK50 -Dimensions: Ø 50 x 183 mm -Weight: 1.6 kg

Condition: used, Test pump, pressure device, measuring device, pressure pump, pressure test pump Ncsdpfx Aeh N Timjhvep -Test pump: mobile pressure device -Pressure gauge: 16 bar -Container: volume 95 liters -Dimensions: 1270/490/H1060 mm -Weight: 89 kg

Condition: used, Test device, test device for personal earthing, Safety Pips -Manufacturer: Wolfgang Warmbier, test device for personal earthing, original packaging -Type: Safety Pips -Article No.: 7100.181 -Operating mode: Battery operation 9V -Dimensions box: 115/110/H70 mm Ncsdpfx Astuyc Dehvop -Weight: 0.2 kg

Condition: used, Test pump, pressure device, measuring device, pressure pump, pressure test pump -Manufacturer: Ridgid, mobile pressure test pump -Type: 1425 pump Ncodpfxeilq Hme Ahvjp ss: 50bar/725psi -Dimensions: 720/170/H300 mm -Weight: 10 kg

Condition: used, Test pump, pressure test device, measuring device, pressure test pump Ncodefnaaiopfx Ahvop -Manufacturer: Junginger, mobile extraction device -Pressure display: 40 bar -Dimensions: 790/480/H775 mm -Weight: 47 kg

Condition: used, Test clamp for electricity -Number: 3x available -Price: per piece Ncedpfxeb Uhr Tj Ahvsp -Weight: 4.2 kg

Condition: used, Gauge block box, gauge blocks, parallel gauge blocks, test pin set, test pins, plug gauge Nsdpjg T I Nhefx Ahvocp -Manufacturer: Cary, plug gauge test pin set: 3.01 - 3.49 mm -Content / nominal dimensions: see photos -Dimension box: 135/85 / H60 mm -Weight: 0.3 kg

Condition: used, Test pump, pressure device, measuring device Ncodochyxuepfx Ahvop -with: pressure display -Max. Pressure: 60 bar -High pressure hose -Number: 2x devices available -Price: per piece -Dimensions: 490/165/H260 mm -Weight: 7.2 kg