Used Temperature Bath for sale (7,035)

Condition: good (used), Type: TS -70/1000-10 For sale is a CTS temperature test chamber Model: TS -70/1000-10 Cooling: water-cooled refrigeration unit Compressor has been replaced! Features: - Multi-touch control system - USB and Ethernet interfaces - Cable feedthroughs for test cables: 4 × Ø 125 mm - Safety temperature limiter Applications: - Environmental and longevity tests - Thermal cycling tests (stress screening) - Quality assurance and research & development - Electronics, automotive, materials testing Test chamber volume: 1,000 liters Test chamber dimensions: - Height: approx. 1,000 mm - Width: approx. 860 mm - Depth: approx. 1,100 mm External dimensions: - Height: approx. 1,950 mm - Width: approx. 1,270 mm - Depth: approx. 1,900 mm Temperature range: -70°C to +180°C Temperature deviation: ± 0.3 K over time Temperature change rate: up to approx. 10 K/min Electrical connection: 400V 3/N 50Hz Rated power: approx. 23.1 kW Rated current: approx. 40 A Rsdpfx Ajxdi Ezjdaon Refrigerant: R404A / R23 Weight: 1,000 kg For your peace of mind as a buyer, please note: The following inspections and services are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if required 3. Leak test with certificate 4. Following successful checks, chambers undergo a documented test run Condition: used Scope of delivery: (See pictures) (Specifications and technical data subject to change and errors excepted!) We are happy to answer further questions by phone.

Condition: excellent (used), Weiss Technik TS 60 Thermal Shock Test Chamber / 60 L, –71…+220 °C Water-cooled Item description: For sale is a Weiss Technik TS 60 Thermal Shock Test Chamber. The chamber is ideally suited for rapid temperature cycling tests (e.g., per IEC, MIL-STD, JEDEC) and has been well maintained. Volume & internal dimensions: Test volume: 60 liters Internal basket/test room dimensions (W × D × H): approx. 380 × 430 × 370 mm External dimensions (W × D × H): 895 × 1970 × 1895 mm Temperature ranges & cycling: Hot chamber: +50 °C to +220 °C Cold chamber: –72 °C to +70 °C Transfer time (basket between both zones): < 10 seconds Heating rate / speed up to 17 °C/min Cooling rate / speed up to 3.7 °C/min In single mode (cold zone only), heating rate: approx. 3.2 °C/min Temperature deviation & uniformity: Temporal deviation (temperature control over time): ± 0.3 to ± 1.0 °C Load / permissible weight & lifting system: Basket/lifting system load capacity: 20 kg maximum load Transfer basket secured by safety grilles on all sides Additional features & equipment: Noise level: approx. 58 dB(A) in operation Control: Touchscreen, RS-232 / USB / Ethernet interfaces Electrical connection: 3/N/PE AC 400 V ±10% 50 Hz Rated power: approx. 8.5 kW Rated current: approx. 25 A Rsdpsxr A R Tsfx Adajn On-site protection: 32 A Refrigerants: R-404A / R-23 Weight: 800 kg Important safety information for buyers! The following steps are carried out on our offered chambers prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run. Condition: used Scope of delivery: (see picture) (Technical data subject to change and errors reserved!) For further questions, feel free to contact us by phone.

Condition: excellent (used), Vötsch Model: VT³ 4150 Vötsch Temperature Test Chamber, Air-Cooled Temperature Testing Temperature Range: -40°C to +180°C Rate of Change: Cooling approx. 2.5 K/min Rate of Change: Heating approx. 3.5 K/min External Dimensions (W x D x H): approx. 1390 x 2380 x 1995 mm Test Chamber Dimensions (W x D x H): approx. 1100 x 1475 x 950 mm Rated Voltage: 3/N/PE AC, 400 V ±10%, 50 Hz Rated Power: 11.5 kW Rated Current: 22.0 A Weight: approx. 1020 kg / 1540 liters Refrigerant: R 404A For your safety as a buyer, please note the following information: We perform the following steps on all chambers offered: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: Used Scope of delivery: (see photo) (Technical data subject to change and errors excepted!) Rjdpfxew Ehuts Adajn For further questions, feel free to contact us by phone.

Year of construction: 1999, condition: used, functionality: unexamined, Natural gas-fired, removable rack-type batch furnace for industrial thermal processes FURNACE CAR DIMENSIONS: Length: 1,800 mm Rodpoxfi Ulefx Adasn Width: 1,000 mm Height: 1,150 mm Lobp Acjxfi Uljnrwohl Maximum temperature: 1300°C Insulation in refractory ceramic fiber blocks 1 swing door 6 JET burners Heat output: 240,000 kcal/h Automatic control panel with Pixsys ATR313 controller + safety thermostat Reverse flame exhaust 1 stainless steel heat exchanger Use and maintenance manual Machine sold as is; technical data to be verified

Condition: excellent (used), Several HB-Therm flow meters and water distributors available Condition: as new – from cleanroom production The following versions are available: 3-way 5-way 6-way 12-way 13-way 16-way Note: Original new prices can be found in the attached documentation. Redpfx Ajw D Eh Ijdaon I purchase all machines and peripheral devices directly from customers at a fair price. The subsequent sales price is calculated reasonably so that all three parties – seller, buyer, and myself as the intermediary – make a small, fair deal. Unsolicited purchase offers from various used machinery dealers are therefore not welcome.

Condition: used, Year of construction: 2010, tank capacity: 10,000 l, GENERAL Design: vertical Year of manufacture: 2010 Rsdpoxqb Insfx Adasn Notes: Tank designed for LNG filling station but never put into operation; inside the tank, a tube bundle is installed over the flange, which can be used for temperature control; 2 steel transport saddles (supports) are included; a section of insulation and the insulation jacket are missing from the top part of the cylinder; External diameter: 1,850 mm Total width: 2,300 mm Overall height: 7,700 mm Heating/Cooling: available Insulation: available Max. overpressure: 18.0 bar Mounting type: legs Location: Bremen Technical documentation: drawing, various documents, operating manual Nameplate: Volume: 10,000 liters Product-contact material: V2A 1.4301 (AISI 304) Condition: unused Cylindrical height: 5,239 mm VESSEL Max. permitted operating temperature: 50 °C Number of legs: 3 HEATING/COOLING JACKET Internal temperature control: full-tube coil INSULATION Insulation jacket: bolted Insulation jacket material: stainless steel EQUIPMENT Note: slight residue, pressure marks on the cylinder MATERIAL SPECIFICATIONS Leg material: steel

Condition: used, tank capacity: 25,000 l, GENERAL INFORMATION Features: Crane lugs Design: vertical Remarks: 2 different manufacturers (see pictures) Internal diameter: 3,200 mm Total height: 5,331 mm Heating/Cooling: available Insulation: available Max. permissible operating temperature: 70 °C Max. permissible operating overpressure: 3.0 bar Support design: Feet Location: Outdoor storage France Technical documentation: Drawing Rjdsxqbz Ujpfx Adajn Cylinder temperature control: Half-pipe coil Nameplate: Volume: 25,000 litres Jacket volume: 70.0 litres Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 3,000 mm Previous application: Food (Isomalt) VESSEL Specific gravity of medium: 1.35 (t/m³) Bottom: Conical floor Number of feet: 5 pcs HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil INSULATION Insulation jacket: welded Insulation material: mineral wool Insulation jacket material: stainless steel Insulation thickness: 100 mm EQUIPMENT Manway / dome: in cylinder (approx. 350 x 450 mm), in top head (DN 400) Outlet: Flange DN80 TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Top wall thickness: 3 mm

Condition: used, tank capacity: 16,150 l, GENERAL Design: upright Remarks: Double jacket with trickle ring – suitable only for non-pressurised temperature control; in some areas, the welds of the double jacket have slightly come loose at the upper section Speed: 720 / 1460 rpm Outer diameter: 2,580 mm Inner diameter: 2,490 mm Total height: 5,000 mm Heating/cooling: available Power: 1.7 / 6.8 kW Max. permissible operating temperature: 150 °C Max. overpressure: 3.2 bar Agitator: jet mixer Base design: feet Location: Bremen Technical documentation: drawing Cylinder tempering: double jacket Nameplate: Volume: 16,150 litres Double jacket volume: 1,000.0 litres Cylinder wall thickness: 8 mm Product-contacting material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 2,500 mm Last intended use: dairy TANK Max. permissible operating temperature: 150 °C Number of feet: 3 pieces HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Manhole / access port: on top head (DN 500) Outlet: 80 mm MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) AGITATOR 1 Agitator manufacturer: Ystral Voltage: 380 Volt Redjxqan Hspfx Adajn TECHNICAL DATA / DIMENSIONS Head wall thickness: 6 mm Agitator arrangement: mounted laterally on the cylinder Agitator equipment: Stated agitator data refer to 2 of the tanks; for one tank, the agitator data are slightly different (400 V; 1.8/6.5 kW; 715/1450 rpm (motor was likely replaced)); some minor dents on motor housings

Condition: good (used), Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor Redpfx Adjiruiloasn -Temperature sensor: Screw-in temperature sensor -Measuring range: 0 to 160°C -Accuracy class: KL.1 -Measuring probe: Screw-in length 200 mm -Transport dimensions: 330/260/H140 mm -Weight: 1.3 kg

Condition: good (used), The Buchi R-210 Rotavapor with B-491 Heating Bath offers you a complete solution with vacuum controller, vacuum pump and recirculating chiller all in a small foot-print. Features include: easy to operate, long-life seals for maintenance-free operation, vapour ducting to prevent cross contamination, compact design, maximum safety, and wireless contact on the heating bath. Specifications, Rotavapor: Dimensions 21.65" W x 16.34" D x 22.64" H(55 x 41.5 x 57.5 cm) Weight 35-40 lbs. (16-18 kg.) Power 100-240 V Rotation Speed 20-280 rpm Flask size 50-4000 mL Max Flask Capacity 3kg Specifications, Heating Bath: Dimensions 11.22" W x 11.81" D x 9.45" H (28.5 x 30 x 24 cm) Rjdpfx Adjma A Ivsasn Weight 8.82 lbs. (4 kg.) Operating Voltage 100–120 Flask size Up to 4000 mL Controlled Temp Range 20–180°C Temperature Deviation ±2°C Bath Capacity 4 L

Condition: like new (used), Volume 22 liters Rodpfxshwtv Sj Adaen Good working condition. Please check out our other listings as well.

Condition: ready for operation (used), functionality: fully functional, Small Chest ULT Freezer ULTF 80 -40 °C/ -86 °C Rjdpfx Aowxdp Hjdasn Ultra Low Temperature – 71 L Single Compressor Technology Low Energy Consumption Noise Reduction Filterless Construction 100% HCFC & CFC Free Sub Lids Good working condition. Please check out our other listings as well.

Condition: used, Temperature: Ambient to 85Deg C Dimensions: W32 x H30 x D35 cm We have 2 units in stock! Good working condition. Please check out our other listings as well. Rjdpfx Adoxx Ndajasn

Condition: used, functionality: fully functional, New Brunswick Scientific G76 Water Bath Shaker. New Brunswick Scientific water bath shakers are equipped with a one-piece seamless water bath of deep-drawn stainless steel which is easy to keep clean. Model G76 is equipped with a triple-eccentric Gyrotory drive which is precision-machined and stabilized to rotate the shaker platform in a 13 mm diameter circular orbit. The gyrotory shaker is engineered to handle any workload from 25 mm test tubes to 1,000 mL flasks with equal ease. Features: Reliable, Sophisticated and Convenient Platinum RTD Sensor Precise Temperature Feedback Regulation Triple-Eccentric Gyrotory Drive Rsdpfx Aoupvtiedaen Good working condition. Please check out our other listings as well.

Condition: used, functionality: fully functional, Single Temperiertechnik STW 1-6-30-M4 Temperature Controller. 4 for sale. 1 piece/300 EUR. Good working condition. Please check out our other listings as well. Redpjwf Anhefx Adaon

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting Rjdpsb A Itmsfx Adaen -Type: Sigmagyr RVP210.1 -Weight: 0.8 kg

Condition: good (used), Temperature controller, temperature sensor, temperature setting -Type: 237 Price: per piece Rjdob A Slyspfx Adajn -Number: 28 available -Weight: 0.5 kg

Condition: good (used), Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter -Type: TB "0" -System outputs: 20..30 V -Quantity: 2 available Rodpfjb S Hr Ijx Adasn -Price: per piece -Weight: 0.2 kg

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: SR71-8Y1-1C Price: per piece -Quantity: 7x Available Rsdpfx Adob A Skgjajn -Weight: 0.3 kg

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: Bitric M1-B -Setting value: from 0 to 400 °C -Auxiliary power: 220 V 50/60 Hz 5 VA -Output: 1x changeover contact max. 220 VAC 4 A 900 W -Price: per piece -Quantity: 3 available -Weight: 1.1 kg Rodpfx Aeb A Nfyedaon

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, setting for temperature -Type: HROt-48/k,ap,os Rsdpfx Asb A Skdedasn -Setting value: from 0 to 1200 C NiCr-Ni"K" -5 A, 230 VAC-ohm load -AC 48..63 Hz, 230 V 4 VA -Price: per piece -Number: 4x available -Weight: 0.5 kg

Condition: good (used), Process controller, controller, temperature controller, temperature sensor, temperature setting -Type: HROt-48/k,ap -Setting value: from 0 to 1200 C NiCr-Ni"K" -5 A, 230 VAC-ohm load -AC 48..63 Hz, 230 V 4 VA -Price: per piece -Quantity: 6x Available -Weight: 0.5 kg Redeb A Skcepfx Adajn

Year of construction: 2025, condition: new, 18 kW e-heater Rodpe Hmwksfx Adaon for 1000 pices 1 liter bottles used for pasteurization of cold filled bottles, jars,... automatic temperature control 400V 50Hz 32A 18kW mounted on moveable frame

Condition: used, HB‑Therm HB‑100 U1 tempering unit, Tempering, Liquid tempering, Industrial tempering, Thermolator, Used machine Manufacturer: HB‑Therm Type: HB‑100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Rjdjx Emfwepfx Adaon Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: Water

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Rjdpfjx Emfkex Adasn Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread