Temperature Unit Water 160°

REGLOPLAS P140/9/SG51/1K/RT50

Condition: used, Year of construction: 2001, functionality: fully functional, 1,0 St. gebr. Temperiergerät Hersteller: REGLOPLAS Bdodpfx Amexyt Tneysf Typ: P140/9/SG51/1K/RT50 Baujahr: 2004 Medium: Wasser Temperatur: 140° C Heizleistung: 9 kW

Condition: reconditioned (used), Year of construction: 2002, Multicomponent Arburg IMM (Horizontal & Vertical) Clamping force 100 tons. Year 2002. Machine will be delivered RE-Conditioned (full checked tested and operate) Ask us for our service of Start Up with Warranty of working condition. Technical details CLAMPING FORCE 1000 kN SCREW DIAMETER Horizontal bimetalic 25mm SCREW DIAMETER Vertical 18mm INJECTION PRESSURE 2500 BAR INJECTION VOLUMEN horizontal 54gr INJECTION VOLUMEN Vertical 20gr DISTANCE BETWEEN TIE BARS (h x v) 420x420mm MIN. MOULD HIGHT 250mm DAYLIGHT MAX 750mm Bjdpfxjp Audqj Amyodf WORKING HOURS 79.115 YEAR OF BUILDING 2002

Condition: new, *Technical standard specification: Heating capacity: 9 kW Cooling capacity: 50 kW medium: water up to 160°C Max. external volume: 16 ltr at 160°C max. Flow rate 57l/min  max. Delivery pressure 6,0 bar Dimension L x W x H 780 x 305 x 705 mm Weight approx. 80 kg HIGHLIGHTS EQUIPMENT: - Smart Controller Plus 7" touch / 4.0 capable - Flow measurement, adjustable flow alarms - Return temperature display - Frequency converter for pump speed control with automatic mode for energy-optimised operation, or adjustable flow rate (in the operating range of the temperature control system) Bdsdpfx Ajftm Hromyef - Electronic pressure transducer in the flow - Interface via 9-pin D-Sub connector 20mA/TTY - Connection for external temperature sensor PT 100 for measuring and displaying the mould temperature - Continuous bypass of the heat exchanger with a 3-way valve to reduce deposits in the heat exchangers - More powerful pump, hydraulic parts made of VA, magnetically coupled - Tool emptying by suction - Booster pump for tool filling at high temperatures - Filling via cooling water can be switched to separate filling - SSR for heating control - IP54 splash water protection Visit our website for more details or for other performance classes. *This unit is compliant with European Directives. Other directives and standards are only complied with if stated in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Year of construction: 2012, condition: excellent (used), machine/vehicle number: HIKSA250Aneu, Complete Telemecanique / Schneider Canalis KSA - 400A busbar system available! Stock 75 running meters!!! Type KSA 250A / 250 amps - 5 poles - L1 L2 L3 N PE Voltage Ui max. 690V, frequency 50 - 60 Hz Rail length predominantly 5m, also 1.5m and 3m available Price per meter including connectors, end pieces and brackets Feed and outlet boxes 16-32-63A are available as options (other tap-off boxes 125 - 250A available on request) The dismantling was carried out by a qualified electrician. Busbars are in GREAT condition!!!! Please ask for the desired lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system? Bedpfx Amjpgmryoyjdf

Year of construction: 2018, condition: ready for operation (used), Diameter of process lines/regeneration drain lines/compressed air lines: 50mm/50mm/8mm, max. inlet temperature: 34°C, max. hardness: 10/20°Fr, min./max. operating pressure: 2bar/8bar, min. degree of filtration: 5µm, max. glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, max. tank volume: 30dm³-200dm³, max. Glycol content: 25%, dry air capacity: 50m³-150m³/h, dew point: below 50°C, max. process temperature: 200°C, tank volume: 30dm³-200dm³, max. compressed air consumption: 300l-500l/h, machine dimensions X/Y/Z: approx. 800mm/650mm/1100mm, weight: approx. 150kg. Documentation available. On-site inspection is possible. Bdodpfjuk I Etsx Amyof

Condition: new, *Technical standard specification: Unit type: 6/150 Heating capacity: 6 kW Cooling capacity: 45 kW (Performance data at 80°C flow temperature and 15°C cooling water temperature and a pressure difference between cooling water inlet and outlet of at least 2 bar) Medium: water up to 150°C Maximum external volume: 9 ltr at 150°C *Functional equipment: - Cooling and filling controlled via solenoid valve - Automatic filling via cooling water - Level monitoring by magnetic float switch - Dirt filter in return flow of circulation and cooling water inflow - Reversing circuit for leakage stop operation (usable up to system closing temp.) - Ball valve in flow & return - Automatic temperature-dependent system closure - Filling time monitoring and aquatimer - Adjustable pump overrun - Adjustable temperature alarm - Options: Interface cable - Regulation and control unit SBCmini, with relay for common alarm, 230V, on rear of controller on terminal block - Heating control SSR - Control box IP54 - Interface 20mA TTY; pin assignment Arburg Bdodpfjfnvwqex Amyjf - Cekon plug 16A - Corrosion-resistant components (VA,MS) - Unit mounted on castors, two of them steerable with brake - Additional temperature fuse for safe shutdown of the heating on heating contactor - Bypass between flow and return with reduced cross-section *Pump: Type: Y2051 Delivery rate (max) 27 ltr/min Delivery pressure (max) 4.5 bar Motor power 0.5 kW Type of submersible pump / peripheral impeller *Dimensions/Weights/Colours Dimensions L/W/H: 600 mm x 240 mm x 493 mm (without connection) Weight: approx. 43 kg Colour: Housing: RAL 7035 light grey Front door: RAL 5015 sky blue *Connections: Circulation medium socket G1/2" cooling water socket G3/8" *This unit conforms to the European Directives. Other directives and standards are only fulfilled if they are listed in the order confirmation. This technical specification reflects the standard equipment, customer requests deviating from the standard will be shown in quotations or order confirmations.

Condition: new, Year of construction: 2025, General: -Temperature range max. 150°C for oil (heat transfer fluid) -Robust steel sheet housing -Unit on rollers Hydraulics: -Sealless submersible pump -Qmax. 60 l/min. - Pmax. 3.8 bar -Tank and heating element made of stainless steel -Heating power 9 kW -Tank capacity ~20 liters -Fittings made of brass/stainless steel -Manual oil filling -Mechanical level indicator -Indirect cooling system (tube bundle heat exchanger) -Cooling capacity ~40,000 kcal/h -Manometer -Bypass -Solenoid valves for cooling Electrical and Control: -Electronic PCB control -Solid State Relay Bdedpfx Aeddv Itsmyef -Safety thermostat -Sensor break monitoring -Connection cable with plug Available in approximately 4 weeks!

Condition: new, New unit MASS International NS3 Speciale Angle conveyor with separator available for short-term delivery Example as shown in the picture: L-shaped conveyor with double roller separator Infeed section 600 mm Inclined section 1300 mm Usable width 450 mm Overall width 505 mm (without motor) Bodpfod Tidxox Amyjdf Height-adjustable discharge height 750 - 1050 mm Adjustable angle in the infeed section and in the incline PU belt, black, with studs Stud height 20 mm Stud spacing 500 mm Belt speed 3 m/min Mobile on steerable castors Lateral collection plates in the infeed section Also available as an option: angle conveyor with Super Grip belt and separator (see the last two photos) Double roller separator with covered belt drive equipped with Super Grip adjustable discharge chute

Year of construction: 2021, condition: new, machine/vehicle number: 2021052701, Aluminum flat belt conveyor without substructure Belt length: 6000mm Drive roller: knurled Idler roller: crowned, over-rotated Bdodpog D T N Hjfx Amysf PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC blue, FDA compliant according to EU10/2011 Belt width 500mm, outside Wave edge welded on both sides, 40mm high T-30 studs (61 pieces) - 200mm pitch * antistatic due to threads in the fabric of the running side Endlessly welded with a stepped finger joint Food-grade certificate included V2A stainless steel backing plate, full surface Drive: Motor approx. 1.1kW - horizontally mounted * optionally controllable with a frequency converter Connection 220/

Condition: new, New unit MASS International Conveyor belt NI 1 Flow conveyor/lay-down conveyor Angle-adjustable conveyor belt with a hopper in the infeed section available for short-term delivery Example: NI 1 Length 1500 mm Usable width 250 mm Overall width 305 mm (without motor) Height-adjustable discharge height 600 - 1000 mm Adjustable inclination Cleat height 30 mm Cleat spacing 500 mm Belt speed 3 m/min Movable on steerable swivel casters Bdodpsh Nyp Usfx Amyof Optional: other dimensions, see standard delivery list dimensions according to customer specifications FDA-compliant belt modified belt speed etc.