Used Tapping Attachment for sale (6,190)

Condition: used, fuel type: diesel, Lifting mast, forklift mast, forklift mast, mast, rear stacker -Triplex mast: with free lift -Load capacity: approx. 2000 kg -Lifting height: approx. 3300 mm -Forklift shield: mm -Recording/Dimensions: see photos/techn. drawing -Number: 1x mast available -Price per piece -Dimension retracted: 2070/1190/290 mm Gjdpfx Agohp A Iysrekd -Weight: 580 kg/pc.

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.37KW Gjdpfx Aed Dy Ugogrskd Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: new, Nexturn SA32B with the following attachments: - Loading magazine Iemca Boss 338 Max. machining diameter: 32 mm Max. machining length: 210 mm Axes: 7 Gkjdpfxovyzp Is Agred Tools: 22 Base machine with accessories and electrical equipment for 400 V / 50 Hz, including transformer for supplying the machine and control with 200 V / 50 Hz and chip conveyor for mounting on Nexturn machines, with machine tank Modular system, all driven tools are from WTO, Made in Germany incl. discharge of long parts Scope of delivery: CNC control FANUC Oi TF+ with 7 controlled axes C-axis on main and counter spindle Main and counter spindle collet type standard Synchronously driven guide bush unit Guide bush type standard Standard equipment tool holder Linear slide 5-position tool holder shank 16x16mm 4 drilling units ER16 Drilling device for front/rear face machining, with 5 drilling sleeves ER16 Counter spindle for rear face machining Rear face machining with 4 machining stations ER16) Drive unit for tools for rear face machining on 2 stations fixed and 2 stations driven Pneumatic workpiece ejection device Part ejection control Blow-out device for counter spindle Workpiece ejector Workpiece conveyor for removing the workpieces Separate coolant tank with level and flow monitoring Machine prepared for high-pressure systems (Electrical and mechanical adjustment up to 100 bar) Coolant through the counter spindle Automatic central lubrication with level monitoring Toolbox with special tools Interface for bar loader magazine Interface for chip conveyor PCMCIA card slot USB interface RJ-45-LAN interface RS 232 C interface Control functions in standard scope of delivery: 8 MB program memory Metric input Direct input of drawing dimensions 200 tool wear corrections Operating hour display Workpiece counter Network connection Background machining Automatic power-off function Program flow controllable via handwheel High-speed skip function for using measuring probes Spindle speed monitoring (G25 - G26) Thread milling with variable pitch (G34) Circular arc thread cutting (G35 - G36) Cutting radius compensation (G40 - G42) Macro programming (G65 - G67) 3D coordinate conversion (G68.1 - G69.1) Multiple repetition cycles (G70 - G76) Drilling cycles (G80 - G89) Constant cutting speed for main spindle and counter spindle (G96 - G97) Cylindrical interpolation (G107) Polar coordinate interpolation (G112 - G113) Rigid tapping (M29) Z1 - Z2 synchronous control (M221 - M220) Synchronous rotation/phase control of main and counter spindle (M56 - M57) 4 additional free M commands

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 4ROLL 3000X 15 MM, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller diameter: 310 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, overall weight: 8,500 kg, total length: 5,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 7.35 kW (9.99 HP), number of digital displays: 2, warranty duration: 12 months, cone diameter: 400 mm, working length: 3,000 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 Gkedpfx Aewfc S Togrod -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat

Condition: used, Year of construction: 2001, functionality: fully functional, For sale: a 1 kVA, three-phase, dry-type, resin-insulated ALSTOM transformer, manufactured in 2001. The transformer is designed to step down voltage from V to 400 V and is intended for use in transformer substations and for powering industrial installations. Technical data according to the nameplate: Manufacturer: ALSTOM Serial number: 281483 Year of manufacture: 2001 Gksdpj Aibbzefx Agred Rated power: 1 kVA Primary voltage: V Primary voltage taps: / / / / V Secondary voltage: 400 V Primary side rated current: 28.9 A Secondary side rated current: 1443.4 A Frequency: 50 Hz Connection group: Dyn5 Windings: aluminum Cooling: AN – natural air cooling Insulation class: F Short-circuit voltage: 6% Maximum ambient temperature: 40°C Environmental class: E2 Climate class: C2 Fire resistance class: F1 Weight: 2515 kg Oil-free design, windings insulated with resin. The transformer is equipped with a steel frame and wheels for easy movement.

Condition: used, GVW: 3.000 kg Production country: DE Please contact Christian Theißen for more information Manufacturer: Wörmann Model: Ambulance 3060/240 Year of build: 0 Condition: New Data: Design type: Tandem 2 axle trailer Weight: 3,0 t Dimensions box body LxWxH: 6090 x 2480x 2230 mm Power supply: Battery Special features: Equipment: Treatment room Padded bench Foldable padded bench Sideboard with cupboards Air conditioning Folding changing table Sink LED lighting (autonomous operation possible) Rear door Access ramp and ambient lighting Exterior door with canopy Fly rails in the floor for attaching stretchers Curtain for dividing wardrobe Passage door to the lounge 1 insulated sliding exterior window Facilities: Lounge 2 padded benches Dining table Cloakroom cupboard Space for radios Ceramic hob Refrigerator Sink External door with large canopy 2 insulated sliding external windows AVAILABLE by arrangement Price on demand Information: sample images Gedpfxo Aif Hwj Agrokd

Condition: good (used), lifting height: 9,750 mm, fuel type: electric, General information Year of manufacture: 2013 Weights Gjdpfxs Aip Eao Agrokd Empty weight: 2.765 kg Functional Lifting capacity: 320 kg Working height: 1.175 cm Dimensions of cargo space: 241 x 122 x 250 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 10RS Year of build: 2013 Condition: Used Data: Max. working height: 11,75 m Max. platform height: 9,75 m Lifting capacity: 320 kg Lifting capacity on extension: 120 kg Drive type: Battery Platform dimensions LxW: 2,15 x 1,15 m Platform length pushed out: 0,86 m Ground clearance: 0,09 m Gradeability: 25 % Transport dimensions LxWxH: 2,41 x 1,22 x 2,50 m Empty weight: 2.765 kg Special features: White tires, attachment points for personal protective equipment (PSA) present. Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2004, Lifting system, Hänel, Lean Lift, H: 7.40m, max. 870kg load capacity per container (1640-825mm) – used: Price ex-works: €19,500.00 (net), disassembled, packed and loaded, plus transport and re-installation! Unit 2 Manufacturer: Hänel Type: Lean Lift, 1640-825 Year of manufacture: 2004 Gedpe Ai Ukaefx Agrjkd Equipment number: 224.823/2-4 Equipment dimensions: W x H x D: approx. 1965 x 7371 x 2810mm Retrieval at a height of 590mm 45 containers Max. container load: 870kg per container Permissible average container load: Front: 870kg with a maximum of 20 containers Rear: 870kg with a maximum of 21 containers Max. total load: 40000 (2x20000)kg Empty weight: 6,168kg Container dimensions: approx. 1640 x 825mm Attachable side extensions / side walls 29 containers with a height of 160mm 16 containers with a height of 230mm Special equipment: In/out feature (does not have to be used) 16A, 400V, 7.5kW Electrical and foundation plans are available Condition: good Available: from approximately mid-December 2026 Location: Duisburg

Condition: good (used), Year of construction: 1987, machine/vehicle number: 5742, functionality: fully functional, - Drilling capacity in St 60, 30 mm - Short spindle MK 3 - Spindle stroke 120 mm - throat depth 293 mm - Table support 420 x 300 mm, 2 T-slots - Machined base plate 320 x 329 mm, 2 T-slots - Distance base plate - drill chuck 1000 mm - Feed via turnstile - Weight 220 kg - Spindle speed 160 - 2250 rpm - Operating voltage 380 V-50Hz - Infinitely variable speed adjustment by means of adjustment lever - Motor speed in 2 stages, 700/1435 rpm Gjdpfxjq U Swgj Agrjkd - Tapping device with direction of rotation changeover after reaching the end stops - Coolant system completely installed. - Coolant tank in machine base - Work light with LED - RÖHM drill chuck 1 - 16 mm - New precision machine vice (test winner)

Condition: good (used), functionality: fully functional, mileage: 291,894 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,500 kg, empty load weight: 2,356 kg, maximum load weight: 1,144 kg, first registration: 08/2019, next inspection (TÜV): 11/2028, emission class: euro6, color: silver, number of seats: 3, number of previous owners: 2, Year of construction: 2019, Equipment: ABS, additional headlights, air conditioning, airbag, all-season tires, car registration, central locking, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, truck registration, 7755 Exterior paint, Tenorite Grey metallic MB 7755 AR1 Axle ratio i = 3.692 B25 Parking brake, electric BA3 Active Brake Assist BH1 Hold function C47 Shock absorbers, reinforced C6L Multifunction steering wheel C72 Bumper and corner protectors, paintable CL3 Leather steering wheel CN2 Radiator grille frame in vehicle color D03 High roof D51 Partition, continuous with window E07 Hill start assist E1D Digital radio (DAB) E1G Live Traffic Information E1U USB socket, 5 V E2I Auxiliary battery for retrofitted equipment, internal E2N Control for Pro features in NTG6 E36 Battery control unit with additional relay E4M MBUX multimedia system with 10.25-inch touchscreen ED4 Dry battery 12 V 92 Ah EE1 230-V socket EJ9 COMAND Online ES0 Jump start terminal F1K Clothes hook in cab F49 Windshield, heated F64 Exterior mirrors, electrically foldable F68 Exterior mirrors, heated and electrically adjustable FK3 Radiator grille, chrome FKA Box van FZ5 Anti-theft alarm system G42 7G-TRONIC PLUS H04 Thermal insulation for cab H11 Auxiliary heater, hot air H12 Auxiliary heater, hot water H16 Seat heating for driver H21 Heat-insulating glass all around with band filter in windshield HH4 Automatic climate control system THERMOTRONIC HI1 Climate zone 1 (cold/comfort) IC1 Model series C907/C910 Sprinter IG4 Standard IG5 Basic IL5 Left-hand drive IL6 Metallic paint IR4 Wheelbase 3665 mm (code for dimensioning) IT4 3.5-tonne J10 Speedometer, km/h J58 Seat belt warning system for driver's seat J65 Outside temperature display JA7 Blind Spot Assist JA8 Crosswind Assist JA9 Traffic Sign Assist JB4 Active Lane Keeping Assist JB6 Parking package with 360° camera JF1 Rain sensor JH3 Communication module (LTE) for digital services JI7 Maintenance interval 60,000 km JK5 Instrument cluster with color display JW8 Attention Assist K13 Main tank, 71 liters L13 Fog lamps with cornering light L22 Tail lights with partial LED technology LA1 High beam assist LA2 Automatic headlight control LB1 Lateral marker lights LB5 Third brake light LB9 Step lights LC2 LED light strip in cargo compartment LC4 Comfort roof control panel LE1 Adaptive brake light LG7 LED High Performance headlamps M40 Generator 14V/200A M94 Vehicle without speed limitation EC MG5 Engine OM642 DE 30 LA 140 kW (190 hp) MJ8 ECO start/stop function MP6 Engine version Euro VI MS1 Cruise control Q11 Longitudinal member reinforcement R65 Spare wheel holder under frame end R87 Spare wheel S22 Armrest for driver's seat, ISO-fix (child seat attachment system) S23 Co-driver seat, double seat Godpj Ai D T Uefx Agrokd S28 Stowage box on the side under the front left seat S87 Driver's seat module, low SA5 Airbag, driver SB3 Driver's seat, suspension seat SE5 Lumbar support for driver's seat SK2 Seat occupancy recognition for driver's seat T16 Sliding door, right T75 Handrail for entry, driver and co-driver T77 Handrail, entry to cargo compartment sliding door at partition T85 Handrail on rear corner pillar, left T86 Handrail on rear corner pillar, right V07 Interior lining/interior trim, rear wall/partition V42 Lashing rails on side wall at load securing belt V43 Wooden floor V52 Wheel arch, loadable V94 Cable duct on side wall V95 Cable duct on rear portal VA2 Interior lining of cargo compartment up to roof height (wood) VF6 Upholstery, imitation leather ARTICO black W54 Rear door, double-leaf, 270 degrees W73 Step at rear door XM4 Acoustic package XV1 Minimum total weight of at least 2381 kg required Y10 First aid kit Z1N Approval N1 ZM0 Box van

Condition: used, Zwick / Roell Godpfxj Akcw Us Agrokd Pendulum impact tester / notched impact testing machine Zwick/Roell HIT5.5P Max. impact energy 5.5 J / Year of manufacture 2019 Charpy pendulum 2 J / 2 accessory cases For sale is a used pendulum impact tester from the manufacturer Zwick/Roell for impact testing and determining the impact toughness of materials. Technical data: Manufacturer: Zwick/Roell Type: HIT5.5P Year of manufacture: 2019 Max. impact energy: 5.5 J Rated voltage: 100–240 V / 50–60 Hz Power consumption: 0.7–0.3 A Connection: 1 Ph/N/PE Device dimensions (W × H × D): approx. 870 × 920 × 500 mm (without guard) Weight without attachments: approx. 185 kg Device display / pendulum in use: Pendulum: 2 J Charpy Current pendulum energy: 2,000 J Friction: 0.008 J Friction determination: Empty swing Impact speed: 2.9 m/s Pendulum mass: 0.48 kg Release angle: 107.46° Pendulum length: 330.0 mm Software version on the device: V4.21 HIT Equipment: Electronic control and display unit Transparent protective housing Charpy pendulum according to device display USB and serial interfaces Testing tools and accessories in 2 wooden cases Accessories as shown in the pictures Applications: Notched impact bending tests Impact testing of plastics and materials Material testing / quality assurance Calibration marking: Calibration service sticker from April 2, 2024 is available. Condition: Used Optical condition as shown in the pictures. Scope of delivery: 1 × Zwick/Roell HIT5.5P pendulum impact tester 2 × Accessory cases with the contents shown Additional accessories as shown in the pictures. The work table shown in the picture and items not explicitly mentioned are not part of the sale. Shipping via freight forwarder is possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: ready for operation (used), functionality: fully functional, mileage: 56,600 km, power: 55 kW (74.78 HP), first registration: 09/2017, overall weight: 3,500 kg, fuel type: diesel, color: red, axle configuration: 4x4, maximum load weight: 1,699 kg, empty load weight: 1,900 kg, next inspection (TÜV): 09/2027, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, operating hours: 5,940 h, number of seats: 1, number of previous owners: 1, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1600, first owner, in top condition formerly a municipal/authority vehicle registered as a self-propelled working machine (40 km/h) upon request, the major engine inspection including timing belt, water pump, oil, and filters will be carried out free of charge by us at the time of sale 2593 sweeping operating hours 5940 total operating hours 56,600 kilometers 4x4 all-wheel drive - hydrostatic all-wheel drive including Kif snowplow, type CM 1600, 1500 mm wide (like new/never seen snow) or, alternatively, with Kif front brush, type CM 1600, 1,300 mm wide, year of manufacture 2019 (like new/never seen snow), not visible in the pictures including Gmeiner salt spreader, type Husky 500V FS, with support legs (as new/used twice for testing) as new mixed bristle brush new water spray nozzles reversing camera and suction duct camera sweeping width up to 2270 mm sweeping material container, stainless steel wheelbase 1600 mm track width 1055 mm fresh water tank 180 liters unladen weight approx. 1900 kg permissible total weight 3500 kg length: 4510 mm / width: 1210 mm / height: 1970 mm driving speed 0-40 km/h working speed 0-24 km/h noise reduction package engine: water-cooled 4-cylinder VW industrial diesel engine fuel tank approx. 60 liters hydrostatic all-wheel drive 2-circuit high-pressure hydraulics circuit 1 (front) 0–50/0–70 l/min - 225 bar circuit 2 (rear) 0–20/25/30 l/min - 195 bar hydraulic service brake via foot pedal cabin with air-sprung comfort driver's seat air conditioning / heating Gedpfxe Akdq Rs Agrekd water treatment system hydrant connection dosing system other application possibilities through additional attachments from HAKO, such as sweeping brushes, snowplows and lawnmowers (not included in the scope of delivery) errors, changes and prior sale reserved We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes and prior sale reserved We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. Saturdays by appointment. Outside of these opening hours, telephone appointments are possible. We will gladly accept your current used equipment/vehicle in part exchange. Sales to commercial companies and exporters will be given priority, and this applies to our entire vehicle stock. The above information is non-binding, errors/changes and prior sale subject to change!

Condition: used, Lasko hammer KGK 063 Impact force 630 mkp Stroke max. 630 mm Bear weight 630kp Top pressure - filling pressure 5 bar Gkodpfx Agsu Eb Nierjd

Condition: good (used), Logitrans ELF1001/920 Mobile Paper Stack Lifter This device is in very good condition. Purchased from a small printing company, it’s practically unused. Hydraulic drive, built-in battery, and charger. Battery-powered. The stack lifting and lowering cycle is controlled from a mobile console that can be attached magnetically to the workstation or via the control on the device’s drawbar, ensuring fast operation. Load capacity: 1000 kg. Made in Denmark. Pallet/sheet dimensions: 785 x 1150 mm Gede Aitgropfx Agrokd Lifting height: 920 mm. The device can be used as a stack lifter for a machine or as a standard high-lift pallet truck.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 120 mm, travel distance W-axis: 450 mm, For sale: Hauser coordinate grinding machine, model S35-400 The machine is in excellent condition and underwent a partial overhaul in 2024 for €15,000. The machine is equipped with 6 high-quality grinding motors, a face motor, and turbines. TECHNICAL DATA Godpfswtqthjx Agrokd Distance between column and spindle: 365 mm Clearance between table and spindle: 485 mm Main spindle diameter: 100 mm X-axis: 500 mm Y-axis: 350 mm Z-axis: 120 mm W-axis: 450 mm U-axis: 5.5 mm Maximum taper grinding: 16° Table size: 600 x 380 mm T-slots: 6 units, 10 mm width, 50 mm spacing Table load capacity: 300 kg Speeds and Tool Holders Speed 22S: 4,500 - 22,500 rpm 45S/45ST: E19 Speed 45S/45ST: 9,000 - 45,000 rpm 80S: F6 Speed 80S: 40,000 - 80,000 rpm T10/T16: Ø 3 mm Speed T10/T16: 100,000 / 160,000 rpm Slot grinding attachment: 2,900 - 34,500 rpm Planetary movement: 5 - 250 rpm C-axis: 0 - 5 rpm X/Y feed: 0 - 1,200 mm/min W-axis feed: 900 mm/min Z-axis feed: 0.5 - 12,000 mm/min MACHINE DETAILS Digital measuring accuracy: 0.001 mm Base deviation: 0.003 mm Power: 7.5 kW Compressed air requirement: 20 m³ System pressure: 5 bar Footprint: 3.5 x 4.4 m Machine height: 3.5 m Connection value: 8.3 kVA Weight: 3.1 t EQUIPMENT - Slot grinding attachment - Rotary table, 300 mm diameter - Swivel table, 200 mm diameter - Coolant system - Extraction unit - Very high-quality accessories included Transportation and loading can be arranged across Europe at extra cost upon request. Prices plus VAT. Viewing by appointment is possible. Contact us—our team is happy to assist you. Trade-in or exchange possible! MACHINE PROCUREMENT / SALES PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit our website.

Condition: good (used), Year of construction: 2003, For sale is a 2 component injection molding machine brand Arburg and type 420 C The machine comes from a production where much importance is attached to maintenance and cleanliness. Likewise, the maintenance and repair are carried out there immediately by skilled personnel Arburg 420C 1000-150/60; clamping force: 1000 kN Year of construction 04/2003; screw diameter Ø25mm each installed; 9x mold heaters; 2x core pull hydraulic; 1x pneumatic valve gate; 9x temperature sensors; 1x cavity pressure sensor; Currently approx. 36,684 hours; 1x spare cylinder Ø18mm for unit 2 additionally available Prices plus VAT Viewing possible by appointment. Contact us, our team is happy to help you. Godpfelwxpisx Agrokd Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Condition: used, fuel type: electric, General information Year of manufacture: 2011 Weights Empty weight: 7.210 kg Functional Gsdpfj Ai Effsx Agrekd Mast: articulated arm Lifting capacity: 225 kg Working height: 1.720 cm Dimensions of cargo space: 650 x 150 x 210 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 990 m Max swing of platform in degrees: 355 Production country: UK Additional information Please contact Christian Theißen for more information Manufacturer: Nifty Lift Model: HR17NE Year of build: 2011 Condition: Used Data: Max. working height: 17,20 m Platform height: 15,20 m Max. reach: 9,90 m Platform lifting capacity: 225 kg Platform dimensions LxW: 1,50 x 0,75 m Swivel range: 355° Overhang: 0,02 m Gradeability: 25 % Transport dimensions LxWxH: 6,50 x 1,50 x 2,10 m Ground clearance: 0,17 m Area of use: Inside and Outside Drive type: Battery Empty weight: 7.210 kg Special features: White tires, rotating work basket (2x 90°), basket arm/vertical rotation angle 150°, PPE attachment points provided. Additional Information: It is not possible to display the hours because the hour counter has been reset. Location: 18196 Kavelstorf, Rostock available immediately

Condition: good (used), Year of construction: 2009, High-performance CNC turning and milling center for the complete machining of complex turned parts. The documented configuration combines a main and counter spindle with two tool slides, two 12-position turrets, Y and B axes, and C axes on both spindles. Machine type: INDEX G300 RatioLine Year of construction: 2009 Turning length: 710 mm Main spindle: D90 43 kW Counter spindle D90 28 kW Control: INDEX C200-4D The INDEX G300 RatioLine is designed as a flexible CNC turning machine for complete machining in a single setup. The main and counter spindles enable the transfer of the workpiece within the machine. The two tool slides support parallel and combined turning, drilling, milling, and threading operations. Feature Specification Series G300 RatioLine Machine type CNC turning and milling center with main and counter spindle Year of construction 2009 (according to nameplate) Turning capacity 710 mm Tool carrier 2 tool slides, each with a 12-position turret Control INDEX C200-4D with 26 cm color flat screen Operating and display language English Machining concept • Complete machining on main and counter spindle • Two tool slides for flexible machining sequences • First slide with X, Y, Z, and B axes • Second slide on the right with X and Z axes • C axes on main and counter spindle • Synchronized spindle functions via electronic cam 12-position tool turret in the spindle area Spindles and clamping system Feature Specification Main spindle D90, size 8 according to DIN 55026/55021 and ISO 702/1 Main spindle power max. 43 kW at 100 percent duty cycle Counter spindle D90, size 8 according to DIN 55026/55021 and ISO 702/1 Counter spindle power max. 28 kW at 100 percent duty cycle Indexing Main and counter spindle with 2.5-degree indexing C axes Available on main and counter spindle Clamping cylinder Through-hole clamping cylinder on both spindles Clamping pressure Variable on both spindles from 8 to 80 bar Spindle synchronization Electronic cam Internal detail and workpiece handling Godo Ai Eqzspfx Agrjkd Tool slide and turret Feature Specification Tool slide 1 X, Y, Z, and B axes; turning length 710 mm Turret 1 12 stations, DIN 69880-30, involute and T-slot positioning Tool slide 2 Arranged on the right; X and Z axes Turret 2 12 stations, DIN 69880-30, T-slot positioning Tool capacity Total of 24 turret stations Thread drilling Rigid tapping with driven tools; C-axis required C-axis functions Transmit and Tracy function Work area with main and counter spindle as well as two tool turrets Control and electrical data Feature Specification Control INDEX C200-4D Screen 26 cm color flat screen Control cabinet 1,800 mm wide Signal light Blue; bar end and fault Teleservice Preparation for analog teleservice Nominal voltage 400 V AC Nominal current 118 A Maximum fuse rating 125 A Nominal power 69 kW Connected power 82 kVA Frequency 50 Hz Control voltage 24 V DC Read operating indicators The control panel photo shows the following individual counters. The general on-time and hydraulic counters are at 99,999:50 hours and thus appear as limit or saturation values. They should not be used as verified total operating hours. Feature Specification Spindle S1 9,682:10:41 h Spindle S2 3,561:06:03 h Spindle S3 12,230:20:08 h Spindle S4 12,311:38:59 h Chip conveyor 5,379:34 h Coolant 22,260:00 h

Condition: used, lifting height: 6,100 mm, fuel type: electric, General information Year of manufacture: 2007 Weights Empty weight: 2.010 kg Functional Lifting capacity: 120 kg Working height: 810 cm CE mark: yes Condition General condition: poor Technical condition: poor Gsdpfx Age Ai Eudjrjkd Visual appearance: poor Other information Delivery terms: EXW Production country: BE Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 2030ES Year of build: 2007 Condition: Used Data: Max. working height: 8,10 m Max. platform height: 6,10 m Drive type: Battery Platform dimensions: 2,30 x 0,76 m Platform dimensions extended LxW: 3,20 x 0,76 m Lifting capacity: 230 kg / 360 kg Lifting capacity on extension: 120 kg Total dimensions LxW: 2,30 x 0,76 m Height transport position with railing: 2,20 m Height transport position: 1.81 m with the railing folded down Gradeability: 25 % Empty weight: 2.010 kg Special features: White tires, attachment points for fall protection systems (PPE) available, for indoor use. Location: 18196 Kavelstorf, Rostock immediately available

Condition: used, Andreas Schmid Climate and temperature test chamber KK 7.200/-50/180S 7,200-liter test chamber / Year of manufacture: 2016 Temperature and humidity tests Used climate chamber with a separate air-cooled Güntner condenser. Technical data: Manufacturer: Andreas Schmid Anlagentechnik GmbH Type: KK 7.200/-50/180S Year of manufacture: 2016 Test chamber volume: 7,200 liters Temperature specifications according to the manufacturer: Temperature control system: -50 °C to +180 °C Previously used for tests on active batteries. Air Liquide gas supply and pressure regulating unit: Completely mounted in a metal cabinet. Pressure regulator, pressure gauge, shut-off and flush valves, as well as pipelines and connecting hoses. All components installed on a common mounting plate in the cabinet. Climate range: +10 °C to +95 °C Humidity range: 10 % to 95 % RH According to the manufacturer's climate diagram Steam humidifier: 8 kg/h Heating: 5.0 K/min (-20 to +120 °C) Cooling: 5.0 K/min (+120 to -20 °C) Without test load Gksdpfx Aj Ai I T Togred Heating power: 36 kW Air circulation: 3 fans / 8,000 m³/h Refrigerant: R404A / 55 kg Connection: 400 V / 3 phases / 50 Hz Max. current: 100 A Internal dimensions (W x D x H): 3,000 x 2,000 x 1,200 mm External dimensions: 3,300 x 3,200 x 2,500 mm With attachments: 3,600 x 3,300 x 3,100 mm Weight of chamber: 4,500 kg Empty weight of condenser: 460 kg Total weight: 4,960 kg without additional parts Equipment: V2A stainless steel interior Double-leaf door 2 heated viewing windows, each 600 x 500 mm 4 heated feedthroughs DN 150 Pressure equalization / Condensate drain Halogen lighting 200 W Program controller SE-702 STANGE ECS-2000-1 software on CD License documents and USB dongle available License rights not checked Güntner condenser, air-cooled: Type: GVV 090.2D/1-N(D).E Year of manufacture: 2016 Dimensions: 2,700 x 930 x 1,650 mm Application areas: Temperature and humidity tests Environmental simulation / Quality assurance Material and component testing Condition: Used Optical condition according to images Scope of supply: Andreas Schmid climate chamber Separate Güntner condenser 1 x Air Liquide gas control unit, completely mounted in a metal cabinet, with existing equipment as shown in the images STANGE CD, dongle, license documents Technical documentation as shown in the images Shipping by freight forwarder possible. Errors and prior sale excepted. We will be happy to answer any questions by phone.

Condition: used, lifting height: 13,150 mm, fuel type: electric, General information Year of manufacture: 2013 Weights Empty weight: 7.310 kg Functional Lifting capacity: 500 kg Working height: 1.515 cm CE mark: yes Gkedpfxj Ai I Eao Agrod Condition General condition: poor Technical condition: poor Visual appearance: poor Other information Delivery terms: EXW Production country: DE Additional information Please contact Christian Theißen for more information Manufacturer: PB Lifttechnik Model: S151-19E4x4 Year of build: 2013 Condition: Used Data: Max. working height: 15,15 m Platform height: 13,15 m Lifting capacity: 500kg Lifting capacity on extension: 500 kg Platform dimensions LxW: 4,00 x 1,67 m Platform length pushed out: 6,24 m Total dimensions LxW: 4,25x 1,90 m Drive type: Battery Height transport position with railing: 3,15 m Height transport position without railing: 2,20 m Movable up to working height: 15,15 m Ground clearance: 0,12 m indoor use only: no Empty weight: 7.310 kg Special features: white tires, all-wheel drive, attachment points for restraint systems (PSA) available, large platform 4.00x1.67 m Information: Batteries are dead Location: 41468 Neuss immediately available

Condition: used, Year of construction: 2022, CNC CONTROL Controller: FANUC 0i-TF Plus CAPACITY Number of controlled axes: 7 (X1/Z1/Y1/X2/Z2/C1/C2) Max. bar diameter mm: ø 20 Max. machining length with guide bushing mm: 210 Gkodpfx Ago Ai Nr Aerod Rapid traverse m/min: X1/Y1: 24 / Z1/X2/Z2: 32 MAIN SPINDLE Max. spindle speed rpm: 10,000 Spindle power kW (S1/S6): 2.2 / 3.7 Max. drilling diameter (main spindle) mm: ø 10 Max. tapping (main spindle): M10 TAILSTOCK SPINDLE Tailstock spindle max. speed rpm: 12,000 Tailstock spindle power kW (S1/S6): 1.5 / 2.2 Max. chucking diameter (tailstock spindle) mm: ø 20 Max. drilling diameter (tailstock spindle) mm: ø 8 Max. tapping (tailstock spindle): M8

Condition: excellent (used), Year of construction: 2015, operating hours: 1,863 h, functionality: fully functional, spindle speed (max.): 12,000 rpm, spindle speed (min.): 1,000 rpm, type of input current: three-phase, grinding wheel diameter: 250 mm, overall weight: 4,800 kg, center height: 210 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 10 m/min, travel distance X-axis: 470 mm, travel distance Y-axis: 390 mm, travel distance Z-axis: 325 mm, grinding spindle motor power: 10,000 W, table length: 1,000 mm, table width: 275 mm, input current: 63 A, input voltage: 400 V, CNC Tool grinding machine SCHNEEBERGER Norma NGC TECHNICAL CHARACTERISTICS: Year of manufacturing: 2015 CNC control: FANUC 31i Software installed: Quinto 5 Colour touchscreen: Yes Number of axes: 5 Height of centers: 210 Stroke X axis: 470 [mm] Max. Stroke speed X axis: 20000 [mm/min] Resolution X axis: 0.000025 [mm] Gkjdpfx Ao Akdc Degred Stroke Y axis: 390 [mm] Max. Stroke speed Y axis: 20000 [mm/min] Resolution Y axis: 0.000025 [mm] Stroke Z axis: 325 [mm] Max. Stroke speed Z axis: 10000 [mm/min] Resolution Z axis: 0.000025 [mm] Table length: 1000 [mm] Table width: 275 [mm] Grinding spindle attachment: HSK 50 Min. grinding wheel speed: 1000 [rpm] Max. grinding wheel speed: 12000 [rpm] Grinding spindle motor power: 10 [kW] Max. diameter grinding wheel: 250 [mm] Min. diameter grinding wheel: 40 [mm] Internal workpiece spindle nose: ISO 50 Number of running hours: 1863 [h] Supply voltage: 400 [V] Rated current: 63 [A] Weight: 4800 [Kg] More information upon request.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, workpiece weight (max.): 100 kg, grinding diameter: 300 mm, type of input current: three-phase, spindle speed (max.): 2,450 rpm, spindle speed (min.): 1,000 rpm, feed length X-axis: 260 mm, feed length Z-axis: 750 mm, grinding spindle motor power: 5,500 W, overall weight: 5,500 kg, rapid traverse X-axis: 6 m/min, rapid traverse Z-axis: 12 m/min, input voltage: 400 V, CNC Cylindrical grinding machine JONES AND SHIPMAN Surprema 650 M EASY TECHNICAL CHARACTERISTICS: Year of manufacturing: 2017 CNC control: GE FANUC Quick Panel Centre distance: 650 [mm] Max. grinding diameter: 300 [mm] Stroke X axis: 260 [mm] Max. Stroke speed X axis: 6000 [mm/min] Resolution X axis: 0.0001 [mm] Stroke Z axis: 750 [mm] Max. Stroke speed Z axis: 12000 [mm/min] Resolution Z axis: 0.0001 [mm] Min. grinding wheel speed: 1000 [rpm] Gkedpfe Akcf Dex Agrod Max. grinding wheel speed: 2450 [rpm] Grinding spindle motor power: 5.5 [kW] B axis swivelling stroke: 190° / 45 [°] B axis indexing precision: 0.02 [°] Internal workpiece spindle nose: Morse 5 Workpiece spindle max. speed: 660 [rpm] Workpiece swiveling range: 15 [°] / 90 [°] Workpiece spindle power: 1.2 [kW] Type of attachment tailstock: Morse 3 Tailstock quill stroke: 30 [mm] Tailstock quill diameter: 50 [mm] Tailstock fine adjustment: Ø +/- 0.05 [mm] Max. load between centers: 100 [Kg] Supply voltage: 400 [V] Weight: 5500 [Kg] More information upon request.

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 7730 € 149.19 € 500 kg 150 mm 150 mm 360 kgm 230 / 50 V / Hz 0.37 kW 0.37 kW 0.1 - 3 U/min 45 s 800 mm M20X6 mm 640 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. Gkjdpfoyq Stvsx Agrjd The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement