Magnetic tape overband magnet shredder

die magnetprofis PEM1200

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Lrsdpfjd Dy S Rjx Adksw Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: reconditioned (used), Year of construction: 2013, Press container with 20 cubic meters of usable volume for roll-off tipper Aventek RM20 Built in 2013 Several available Repaired, inspected, and serviced Large filling opening Split lid opens left/right Double-sided loading Ljdpfx Ajwifivodkorw Side-hinged discharge door Ramp operation possible These machines are offered repaired, inspected, serviced, and repainted in the desired standard RAL color. We would be happy to provide a quote including delivery.

Year of construction: 2018, condition: as good as new (ex-display), Overband plate magnet Version in VA 1.4301 tightly welded Lrsdpjd Dzacjfx Adkew 2000 x 1200 x 350mm completely welded housing Ring eyelets for suspension

Condition: ready for operation (used), Dewatering screen Sotres with Cyclone Brand: Sotres Dim. screen surface: 2800 x 1100 mm Screen opening: 12 x 1 mm with two pieces vibration motors of each 2 kW Including springs. Dim. cyclone: 3500 mm Length , Diameter 1100 mm. including steel construction incl.: tank incl.: Warman pump with e-motor , type 8/6. Lrodpfothy Sbox Adkjw

Year of construction: 1994, condition: ready for operation (used), Motor power: 15.5kW/19.5kW, pressing force: 320kN, spec. pressure: 425kN/m², machine dimensions X/Y/Z: approx. 5700mm/1900mm/1800mm, weight: approx. 6000kg. The machine has a defect due to moisture and should be checked. Lrsdpfx Asip D Rpedkew

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Lrodpeh Ellzofx Adkow Connection 220/400V, 50Hz protection class IP54

Condition: new, table height: 650 - 1050messurements (LxWxH): 2480 x 1230 x 650 bis 1050mmtable width: 1230table length: 2480weight approx.: 733This enables the user to flexibly adjust the height of the work surface to the respective requirements in order to improve economy and ergonomics. The standard height adjustment is carried out by manual hydraulics in the range of 650 - 1050 mm (higher or lower on request). Like the SST fix series, the worktop also has a 100 x100mm Ø 28 grid. Used in combination with processing machines, testing or post-processing devices (deburring, marking, testing to the height of the clamping table of the machine can be adjusted. The table systems can be easily changed by means of a lifting truck. These portable systems, with the different fastening and securing options for the maintenance of injection molding and die-casting tools have already been proven. After removal from the machine, the tools can be safely serviced on site and taken for repairs for maintenance Table 2 below gives an overview of the available standard models. For more information please follow this link: Lrodpfx Adjfk Aifskew

Condition: excellent (used), Year of construction: 2023, operating hours: 1,851 h, functionality: fully functional, pressing force: 70 t, filling opening width: 1,100 mm, filling opening length: 1,400 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 500 kg, overall weight: 17,000 kg, oil tank capacity: 70 l, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410 BS-22/50 Year of construction 2023 Pump operation hours 1,851 hours, as of July 24 Press power main press 70 t (a 70 tonne hydraulic cylinder is installed, special equipment) Specific press force 90,9 N/cm² (a 70 tonne hydraulic cylinder is installed, special equipment) Feed channel 1,400 x 1,000 mm Theoretic cycle time 13 sec Theoretic throughput capacity 266 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 22 kW Connected load 65 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 5,5 t/h bulk weight of 50 kg/cbm approx. 7,5 t/h bulk weight of 100 kg/cbm approx. 9,7 t/h Bale weight with a bale length of approx. 1.2 m up to 500 kg, depends on material SPS controller Siemens S7-1500 Operating panel Schneider Harmony Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport weight baler approx. 17 t Special equipment: Wear-resistant floor made of HARDOX steel Larger main hydraulic cylinder with 70 tonnes of pressing force Special press ram for pressing loose bulk materials with small grain sizes OptiCut XS system for lower cutting forces and higher throughput rates Special pressing piston for pressing "difficult" materials Technical data for the conveyor belt: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Deutschland Type KGF GB 1500 Year of construction 2023 Drive power 4.0 kW Belt speed approx. 0.3 m/second Length feeding conveyor 2,679 mm Lodpsu Thbxefx Adkorw Length elevating conveyor 6,866 mm Length goose neck 1,272 mm Grade 35° Effecting width 1,400 mm Side wall height 800 mm Carrier height 50 mm Carrier distance 750 mm Belt quality EP 400/3, 3:1 (DIN quality N) Overall height 4,515 mm Overall transport dimensions11,148 x 2,502 mm (l x w) Technical data on the non-contact personal protection system: Manufacturer BOREMA Umwelttechnik AG, Switzerland Type APSS iBOR 22 Year of construction 2023 Condition of the press system: The entire system is in very good condition due to the short operating time of only 1,851 pump hours and the processing of only paper, cardboard and film. Scope of delivery: Avermann baler, type AVOS 1410 BS-22/50, incl. wire drawing stations and bale chute Avermann conveyor belt, type KGF GB 1500 BOREMA personal protection system, type APSS iBOR 22 Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 2,900 kg, total height: 25,000 mm, total length: 2,710 mm, total width: 1,040 mm, input voltage: 400 V, We offer a high-performance, low-speed two-shaft shredder designed for effective and precise shredding of aluminum materials, including: 🔹 rods 🔹 strands 🔹 wires 🔹 flat bars Ledpfx Astvdcyjdksrw 🔹 cables The specially engineered shredding system prevents material from being dragged or crushed — aluminum is efficiently cut, not compressed. The knife design ensures clean and accurate cutting and eliminates the risk of vertically fed material passing through the chamber unshredded. The knives are made of certified, wear-resistant steel. The shredder is equipped with gear motors from a reputable manufacturer. Available motor configurations: 2 × 18.5 kW or 2 × 22 kW. Fraction size – to be agreed upon with the customer. Model RS8: working shaft length of 600 mm – identical construction to RS800 and RS1200 models. Manufactured in Poland.

Condition: new, Year of construction: 2025, CE certificated Concrete Plants 24/7 customer support and aftersales services FREE OF CHARGE ASSEMBLY & TRAINING. EASY TRANSPORTATION & QUICK ASSEMBLY (2 hours) *MINUMUM INVESTEMENT FOR GROUNDWORK GENERAL TECHNICAL SPECIFICATIONS Plant Type : Mobile Concrete Batching Plant - PLANETARY MIXER Plant Capacity : 30 m³/ hour freshly compressed concrete Mixer Capacity : 750/500 lt (0.5m³ Compressed Concrete) Electronical equipment : Siemens Lodpfx Aohzu N Iedksrw Other equipment & accessories : Italian Unlimited users & Remote access