Used Table Shears for sale (17,310)

Condition: good (used), Year of construction: 2013, sheet width 2520 mm plate thickness 3.2 mm ST cutting thickness max. 5.0 mm AL cutting thickness max. 1.5 mm VA no. of strokes 34 Hub/min cutting angle 1° 20 Grad back stop - adjustable max. 1.000 mm work height max. 800 mm total power requirement 7.5 kW weight of the machine ca. 2100 kg New price approx. 21,000 euros Special price on request Machine was rarely used - good condition (!!) Furnishing: - robust / motorized swing-cut guillotine shears - Shatterproof, torsion-free steel welded construction - compact and clear mechanical design - ESTUN NC digital display - type "E10-S" - electro-motorized back gauge, adjustment via electric. Button - 1x hold-down bar - manual cutting gap adjustment - rear protective device (side protective grilles) Gjdpfey Raitex Ankjub - Selector switch for single and continuous stroke - 1x front side stop - 2x front support arms - 1x freely movable foot switch - original instruction manual

Condition: used, sheet width 1050 mm plate thickness 4.0 mm Gusdpfxsy Raimj Ankob thickness at "Niro-steel" 3.0 mm distance between columns 1200 mm blade length 1150 mm no. of strokes 46 - 69 Hub/min cutting angle 1.30 ° Control konv. oil volume 100 ltr. total power requirement 5.68 kW weight 1100 kg From a maintenance workshop In good condition (!!) Features: - Robust electro-hydraulic sheet metal shear - Electric motor-driven backgauge * Backlash-free ball screw for backgauge * Travel speed 100 mm/sec - Electric cutting length limiter * Cutting length limiter to increase the stroke rate per minute - Manual cutting gap adjustment (lateral adjustment) - Front support table with recessed grips - Front finger/interference guard - 1x side stop with T-slot and millimeter scale - 2x front support arms - 1x freely movable foot switch - Operating instructions (PDF)

Condition: used, functionality: fully functional, Assembly table EDER+MULLER Gusdpfx Aney Simqokjb

Year of construction: 1980, condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw -Manufacturer: Ulmia, circular saw type 1612SP -Motor power: 2.2 kW / 2800 rpm -Saw blade: Ø 280 mm Guedpfx Anof D H Hbskob -Sliding carriage: is available -Max. cutting height 70 mm -Miter cut: up to 45° -Length stop: up to approx. 800 mm -Dimensions 1000/1340/H980 mm -Weight: 306 kg

Condition: used, functionality: limited functionality, Circular shear, capacity 1500 x 6 mm, pneumatic system needs to be completely or partially renewed. Gsdpfey Shm Aox Ankeub

Condition: ready for operation (used), Year of construction: 1977, Altendorf F45 Tilting panel saw Scoring unit Tiltable up to 45° Manual height and tilt adjustment with handwheel Sliding table 3200 mm Cutting width 1250 mm Guodpfx Ajy Sg Ilenkeb Mitre fence Year of manufacture: 1977 Price: 3500.-

Condition: ready for operation (used), Year of construction: 1994, Holzher 1245 Superslide electromotoric height adjustment with digital display electromotoric tilt adjustment with digital display Cutting length with sliding table mm 3200 Crosscut length with sliding table mm 3200 Cutting width mm 1250 Table size mm 1100 x 800 Max saw blade diameter mm 450 Saw blade bore mm 30 Saw tilting range 0-45° Maximum cutting height at 450 mm Ø mm 150 Cutting height at 45° at 450 mm Ø mm 106 Motor power kW 7.5 Godjy Sgxdopfx Anksub Saw motor speeds rpm 3/4/5000 Extraction port Ø mm 80/120 Machine weight approx. kg 930 Connection value V/Hz 380/50 Year of manufacture 1994 Price 5200.-

Condition: new, functionality: fully functional, color: orange, overall weight: 2,300 kg, Year of construction: 2025, Pulverizer attachment with rotation from stock Suitable with 20-25-30-35tons excavator Gedpjy Sfnwsfx Ankeub For detailed information please contact us

Condition: new, neu ca. 2 Wochen ab Auftragse 5442 € 105.03 € 4536 € 28 mm Accessory set consisting of: 14 pcs. screw clamp180° HIS28Z3000 Godpfx Ajyq Sumenksub 8 pcs. screw clamp45° HIS28Z3045 6 pcs. V-support HIS28VP100 30 pcs. quick clamping bolt shortHIS28SB100 6 pcs. connection bolt HIS28BS100 4 pcs. mangnetic bolt HIS28MB100 8 pcs. stop rail 150mm HIS28FA150 8 pcs. stop rail 225mm HIS28FA225 2 pcs. stop rail 500mm HIS28FA500 6 pcs. stop angle 175mm HIS28WA175 1 pc. stop angle 325mm HIS28WA325L 1 pc. stop angle 325mm HIS28WA325R 1 pc. support angle 600mm HIS28W600L 1 pc. support angle 600mm HIS28W600R 1 pc. support angle 800mm HIS28W800L 1 pc. support angle 800mm HIS28W800R 1 pc. cleaning brush Nylon HIS28RB 1 pc. torch holder HIS28BH 1 pc. tool cart HIS28WW1000 and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L)

Condition: new, neu ca. 2 Wochen ab Auftragse 3165 € 2754 € 28 mm Accessory set consisting of: 8 pcs. screw clamp 180° HIS28Z3000 4 pcs. screw clamp 45° HIS28Z3045 4 pcs. V-support HIS28VP100 20 pcs. quick clamping bolt short HIS28SB100 4 pcs. connnection bolt HIS28BS100 2 pcs. manetic bolt HIS28MB100 4 pcs. stop rail 150mm HIS28FA150 6 pcs. stop rail 225mm HIS28FA225 4 pcs. stop angle 175mm HIS28WA175 2 pcs. stop angle 275mm HIS28WA175275 1 pc. stop angle HIS28WA325L 1 pc. stop angle HIS28WA325R Guodeyq Sq Iepfx Anksb 1 pc. support angle 800 HIS28W800L 1 pc. support angle 800 HIS28W800R 1 pc. cleaning brush Nylon HIS28RB 1 pc. torch holder HIS28BH and 1 care set (consisting of 1 pc. HIS-Cleaner-1L and HIS-Premium-1L) OPTION: Tool cart HIS28WW1000 € 545,--

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 2590 € 2255 € 16 mm The set for everyday and universal use with an extensive range of clamps, brackets and clamping options. Including tool trolley for an optimised and fast workflow. Consisting of: 10 screw clamps 180° HIS16Z3000 4 screw clamps 45° HIS16Z3045 4 V-support HIS16VP100 8 stop brackets 90x37, 5mm HIS16WA9037 8 pieces stop bracket 90x90mm HIS16WA9090 2 pieces stop bracket 300mm HIS16WA300 1 piece stop bracket 500mm HIS16WA500L 1 piece stop bracket 500mm HIS16WA500R 4 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 28 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB Gedpfx Aeyq Sqhjnkjub 1 piece torch holder HIS16BH 1 piece cleaner HIS- Cleaner-1L 1 piece Anti-stick agent HIS-Premium-1L

Condition: new, neu ca. 2 - 4 Wochen ab Auftr 1725 € 1485 € 16 mm Gjdpfxeyq Sqbo Ankoub The extended entry level with added value in the set configuration for the most common work steps and applications. Consisting of: 8 screw clamps 180° HIS16Z3000 2 screw clamps 45° HIS16Z3045 2 V-support HIS16VP100 4 stop brackets 90x37, 5mm HIS16WA9037 6 pieces stop bracket 90x90mm HIS16WA9090 2 pieces stop bracket 300mm HIS16WA300 2 pieces stop bar 75mm HIS16FA075 8 pieces stop bar 115mm HIS16FA115 20 pieces quick clamping bolt short HIS16SB100 1 piece cleaning brush HIS16RB 1 piece torch holder HIS16BH 1 piece cleaner HIS-Cleaner-1L 1 piece anti-adhesive agent HIS-Premium-1L OPTION: Tool trolley HIS16WW1000 € 449,--

Condition: new, table length 1500 mm table width 1500 mm table height 150 mm bore 28 mm Gedpfx Aney N D N Uekeub weight 543 kg

Condition: new, Year of construction: 2024, Hard cover making table -Casemaker- The device is brand new, with a 12 month warranty. European production, based on branded subassemblies. Duty Cycle: The operator manually handles the covering material, to the gluing device in which the hot glue is automatically applied (operating temperature 60-70 ° C). A sheet of covering material with glue the operator places it manually on the suction table, then manually handles sheets of cardboard and spine. The pre-prepared cover is inserted into device manually, which winds up and glues the top and bottom of the covering material (patented brush system). During the sizing operation, the cover is pressed through the guide rolls. Covers leaving the unit are immediately ready for further processing The machine is equipped with: – gluing device for applying glue onto the top of the sheet – table with a suction – guides fixing the veneer and cardboard – wrapper module – delivery table Technical data: Max format: 840x500mm Gsdpjy N Dyasfx Ankoub Min format: 100x100mm Performance: 100-150 covers / h Thickness of the covering material: 80-200 gsm Thickness of cardboard: 1-4mm Overlap covering material: 13-20mm Glue temperature: 30-100 ‚C Glue capacity: 2-3kg Smooth adjustment of the rotation speed of the rollers and brushes Types of covering material: fabric, laminated paper, photographic paper, imitation leather, PVC, polyurethane. Dimensions of the machine: 1500x1000x1000mm Power supply: 380V Consumption: 3.7kW Machine weight: 500kg

Condition: new, galvanized sheet metal dust collection trays fold down side and rear walls - optional rear wall with suction function Working area 2500 x 800 mm Working height 930 mm incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Nominal air flow 5400 m3/h Number of filter cartridges # 4 DM filter cartridges 320 mm Length filter cartridge 600 mm Total filter area 34.8 m2 Noise level 78 dBA Compressed air 5-7 bar Guodpeh Ucqtofx Ankob Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Year of construction: 1993, condition: good (used), motorised transport table with rollers and. var. speed dimensions L x W x H = 2950 x 1300 x 900 mm feed speed var. Gjdpfxsgvvn Ej Ankjub height adjustable +/- 15 cm max. weight load 50 kg/ m Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: excellent (used), Year of construction: 2005, 3-axis controlled panel saw with parallelogram support table Swiveling control panel above the table Guedpfxjyftzks Ankob Data input via membrane keypad Electronic scoring unit adjustment Automatic parallel fence with adjustment via leadscrew and linear ball bearing guide Parallelogram support table for miter cuts Manual adjustment with angle settings from +50° to -50° perpendicular to the cutting axis with corresponding fine adjustment. Angle detection system using magnetic strip and LCD display. Crosscut stop with 3 LCD displays Extendable support table with roller support Technical Data: Cutting length mm: 3200 Main saw blade diameter mm: 450 Scoring blade diameter mm: 120 Panel cutting size with extendable stop mm: 3200x3200 Swivel range degrees: 0° / +46° Max. cutting height at 90° mm: 150 Max. cutting height at +45° mm: 130 Saw blade rotation speed rpm: 2500, 3500, 5000 Scoring blade speed rpm: 9000 Extraction port diameter mm: 120 & 100 Main motor power Hz 50 kW: 7.5 Scoring unit power Hz 50 kW: 0.75 Cutting width with parallel fence mm: 1270 Weight approx.: 1180 kg Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-location, loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. The buyer is welcome to inspect the machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries including your address & telephone number!)

Condition: new, Year of construction: 2024, ALL ALTENDORF F25 TYPES READY ON STOCK! manual hight and Stilding adjustment for saw aggregate 0 – 46° digital display for saw blade height and tilting angle motor 5,5 kW Gujdpjg Dgr Hofx Ankob saw blade speed 3600/ 4200 U/min. sliding table length 3200 mm angular fence for cutting length up to 3450 mm prearrangement for retrofitting of scoring unit saw blade DM max. 315 mm max. cutting height 104 mm max. cutting height at 45° = 70 mm working height 880 mm Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, Features: 5-axis electronic control overhead control panel, rotatable electronic adjustment for scoring unit automatic rip fence with movement on screw and ball pushing linear guide start / stop pushbuttons integrated in the carriage “Quick Lock” squaring fence sliding carriage with 'arc' profile - 10 years warranty telescopic swing arm made of large dimensioned extrusion and linear guide on recirculating ball bearings Gjdpscrnm Njfx Ankjub Technical Data: saw blade DM mm 550 scoring unit blade DM mm 120 squaring capacity mm 3200x3200 tiltig capacity deg. 0 +46 max. cutting height at 90° mm 200 max. cutting height at +45° mm 130 saw blade speed RPM 2500, 3500, 5000 scoring unit blade speed RPM 8500 DM suction connections mm 120 & 100 main motor Hz 50 kW 7,0 scoring unit motor Hz 50 kW 1,3 cutting capacity right side mm 1500 incl. following options: 570335 "Pro-Lock" system for quick changing of main saw blade without tools

Condition: new, ALTENDORF Model F45 Pro Drive Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with promotional price and full manufacturer warranty. Pro Drive control: 3,5" color screen with separate keyboard Automatic dimensional correction on the rip fence and angle fence when tilting the saw unit Simple calibration of the axes Machine diagnostics, operating hours counter, USB interface Recall of the last dimension input (back function) 99 storable cutting programs Grooving: with automatic step-by-step positioning of the rip fence 400V / 50Hz - Europe , Scale: scale in mm Electromotive height and tilt adjustment 0 - 46° for the main saw blade with automatic correction of the cutting height when the saw unit is tilted Machine height 910 mm (basic equipment) The control panel of the F 45 is mounted at eye level. This makes it easy to control all axes, and all settings are in view. The one-handed operation of the swing-away device is easily accessible from the working position in front of the machine. Another advantage: nothing stands in your way at the smooth machine front. INCL. OPTIONS: M62003 Template holder M64080 Extended cutting height with saw blade projection of max. 204 mm. M51101 One-sided tilting saw unit with 7.5 kW (10 HP) motor, M24030 2-axis scoring unit with electric motor-driven height and side adjustment M24037 LED lighting for the danger area of the scoring unit M41010 Table top extension 840 mm M34204 Double roller carriage, carriage length 3200 mm M44404 Angle miter fence, cutting to length up to 3500 m. M44443 CNC parallel fence, cutting width 1300 mm. M44450 Front support roller. M37003 On/off switch on the sliding table. Note used machines: - Errors in technical specifications and subject to prior sale. - Indicated prices are valid as pickup prices ex location - free loading! Gusdpsiz Aufjfx Ankob - The machines have been cleaned and functionally tested. - All machines are bought as seen without any claim to warranty. The buyer is free to inspect the machines at the site. - Special agreements are only possible in written form. (We answer inquiries only under indication of your address + telephone number!)

Condition: excellent (used), Year of construction: 2010, Altendorf F45 Elmo 3-axis control Carriage length: 3200 mm Cutting width at rip fence: 1300 mm Scoring unit: Prepared Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence: electric / position control Crosscut fence adjustment: manual Saw blade angle display: digital readout Cutting height display: digital readout Crosscut fence with mitre function: yes Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Extraction port: 80 and 120 mm Guodsy Sbvkopfx Ankjb Duplex mitre fence Year of manufacture: 2010 Price: 15,500.-

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Amada, sheet thickness (max.): 6 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Amada GX 630 +SE30 +STACKER FULL OPTIONS Shear GX630 Discharge conveyor + lift system + scrap bin SE30 Constant level stacker ENC 30 This Amada guillotine shear comes equipped with a combined discharge conveyor, lift system, and scrap bin. Gjdpfx Ajy Sbu Honkjub At the rear, it features an original Amada discharge conveyor with material stacker. The system is frequency-controlled and maintains a constant drop height for material stacking. The machine is in very good condition and has only been used for thin sheet material. All documentation and service reports are available. Machine specifications: Cutting length: 3050 mm Max. thickness: 6 mm steel Control: Amada Automatic cutting angle adjustment Automatic cutting gap adjustment Backgauge: 1000 mm Lift system: pneumatic Dimensions (L x W x H): 3790 x 2230 x 1860 mm Weight: 6150 kg

Condition: used, functionality: fully functional, Used guillotine shear from Donewell Model: 2500 3 Steel capacity: 2500 x 3 mm Electric backgauge Adjustable cutting angle Godpfx Anoy Nycqjkjub

Condition: ready for operation (used), DELTA LC 400 / Rotary Table Surface Grinding Machine -Magnetic chuck (rotary table) 400mm -Max. grinding diameter 400mm -Grinding height (distance table – grinding wheel) approx. 220mm -Grinding wheel dimensions / standard / 200x80x78mm -Spindle speed / grinding spindle 2840 rpm -Fine feed 0.01mm -Distance / column – grinding wheel axis 315mm -Spindle motor / 3kW Guodpfx Anoy Sbgcokjb -Lateral grinding wheel dresser -Machine enclosure -Coolant system Dimensions: LxWxH 1.2x0.8x1.8 meters / Weight 700Kg Errors and omissions excepted

Condition: used, Year of construction: 1991, Saw unit: tiltable 45° Carriage length: 1200 mm Max. saw blade diameter: 250 mm Max. blade protrusion at 90°: 75 mm Saw blade bore: 30 mm Motor power: 2.2 kW Control panel: below on the machine housing Height adjustment: manual Tilt adjustment: manual Tilt angle display: scale Cutting width adjustment: manual Cutting width display: scale Weight approx.: 150 kg Storage location: Gusdey Sbdhspfx Ankeb