Used Swivel Arm Dance for sale (8,915)

Year of construction: 1999, condition: used, Max. drilling diameter in steel, strength 600MPa: 50mm, max. drilling diameter in cast iron, strength 250MPa: 60mm, max. boring diameter (with guide) in steel, 600MPa: 200mm, max. thread in steel, 600MPa: M50x1.5, max. thread in cast iron, 250MPa: M60x2, spindle reach: 320-1250mm, pitch circle of holes: 1208-3039mm, distance from spindle axis to base plate: 320-1380mm, max. arm height adjustment: 750mm, max. drill carriage travel on arm: 930mm, arm swivel range: +/-180°, spindle head diameter: 75h6, spindle diameter at front bearing: 55mm, length: 2900mm, width: 1120mm, height: 3271mm, weight: 4.2t, with documentation. An on-site inspection is possible. Itedpfozuzziex Ah Eel

Condition: used, Year of construction: 2007, mast type: telescopic, fuel type: electric, Weights Empty weight: 5.300 kg Functional Lifting capacity: 200 kg Working height: 1.210 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max swing of arm in degrees: 375 Transport dimensions (LxWxH): 3,85x1,2x2,02 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: Toucan 1210 Year of build: 2007 Condition: Used Data: Max. working height: 12,10 m Platform height: 10,10 m Max. reach: 5,18 m Platform lifting capacity: 200 kg Platform dimensions LxW: 1,10 x 0,82 m Total dimensions LxWxH: 3,85 x 1,20 x 2,02 m Itedpfev Ti N Aox Ah Ejl Transport position LxH: 3,85 x 2.02 m Swivel range: 345° Movable up to working height: 12,10 m Ground clearance: 0,03 m Drive type: Battery Empty weight: 5.300 kg Special features: white tires, approved for outdoor use by only 1 person, basket arm telescopic. Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2014, lifting height: 30,500 mm, fuel type: diesel, General information Mileage: 73.006 km Weights Empty weight: 7.240 kg Functional Lifting capacity: 320 kg Working height: 3.250 cm Dimensions of cargo space: 880 x 255 x 355 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 2088 m Max swing of platform in degrees: 500 Additional information Please contact Christian Theißen for more information Manufacturer: Ruthmann Model: T 330 Year of build: 2014 Condition: Used Data: Max. working height: 32,50 m Max. platform height: 30,50 m Max. reach: 20,88 m Platform dimensions LxW: 1,71 x 0,86 m Max. basket load: 320 kg Swivel range: 500° Ground pressure: 56 kN (front) / 42 kN (back) Ground clearance: 0,15 m Support width both sides: 5.30 m (front) / 5.20 m (back) Support length: 4,87 m Ijdpfx Aezzvygeh Eetl Total dimensions LxWxH: 8,80 x 2,55 x 3,55 m Driving license category: C1/3 Empty weight: 7.240 kg Total permissible weight: 7.490 kg Special features: Rotatable work basket, basket arm, rotation angle, power connection in the basket, loading area with loading side panels, van body. WITHOUT roof protection. Information: TÜV und UVV new Location: 41468 Neuss immediately available

Condition: good (used), Year of construction: 2014, mast type: telescopic, fuel type: diesel, Weights Empty weight: 25.139 kg Functional Lifting capacity: 340 kg Working height: 5.670 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information Delivery terms: EXW Max. horizontal reach: 2520 m Max swing of platform in degrees: 360 Transport dimensions (LxWxH): 16,28x4,98x3,09 Itodpfex Uy T Hox Ah Eol Additional information Please contact Christian Theißen for more information Manufacturer: Genie Model: SX180 Year of build: 2014 Condition: Used Data: Max. working height: 56,68 m Max. platform height: 54,68 m Max. reach: 25,22 m Drive type: Diesel Total dimensions LxWxH: 16,28 x 4,98 x 3,09 m Length of transport position: 13,20 m Height transport position: 3,09 m Track widening: 4,98 m Platform dimensions LxW: 2,44 x 0,92 m Max. basket load: 340 kg Swivel range: 360° Overhang: 1,19 m Movable up to working height: 54,68 m Ground clearance: 0,33 m Empty weight: 25.139 kg Special features: Rotating work basket 160°, basket arm, all-wheel drive.

Condition: good (used), Year of construction: 2008, pressure 200 t chamfer lenght 4100 mm distance between columns 3150 mm stroke of upper beam 200 mm dayligth 425 mm Iodpfx Ajzndq Heh Eotl throat 300 mm working feed 9.0 mm/sec return speed 90.0 mm/sec work height max. 980 mm back stop - adjustable ca. 700 mm Control PPS-TS Touch oil volume 350 l total power requirement 18.0 kW weight 12.000 kg range L-W-H 5100 x 1950 x 2850 mm Well-maintained condition (!!) Current new price approx. € 110.000 Special price on request - in checked conditions - machinevideo - ?v=ZX9Ap23e__s Equipment: - CNC electro-hydraulic press brakes - with LVD CNC "PPS-TS TOUCH" control unit * intuitive, touchscreen-based user interface * simple navigation * tool and program library * X-axis control and position display * Y-axis control and position display * swivel-mounted control panel (front left) - CNC-controlled axes: Y1/Y2 + X - CNC motorized backgauge (X-axis) * with 4 manually adjustable gauge fingers * includes lateral and height adjustment (Z and R axes) - LVD upper tool holder * sectionalized goose-neck upper tool - LVD lower tool holder * sectionalized 1V die - 2x front support arms - side safety guards (swiveling doors) - rear safety guard (swiveling door) - 1x movable foot pedal - machine documentation (NL)

Condition: used, Year of construction: 2012, - Machining area: 5300x1400 mm - Main spindle replaced 3 years ago - 18-position tool changer Technical data Machining area Iedpfx Aszuw Rteh Eotl - In the X direction: 5300 mm - In the Y direction with main spindle + WZ-0: 20 mm: 1400 mm - In the Y direction with drilling unit: (all vertical drills) 890 mm - Single-position machining: X = 2 x 2550 mm - Free space in the center: X = 200 mm - Alternating field machining: X = 2 x 2250 mm - Free space in the center: 800 mm 1 automatic tool/adapter changer magazine - Arrangement: mounted on the support, moving in the X direction - Disc changer with 18 magazine positions Guidance system - All axes are equipped with pre-tensioned, surface-hardened precision roller guides. Central lubrication - Manual central lubrication for all main axis linear guides and Z ball screw. 1 vacuum pump, 90 m3/h Console table consisting of: - 2 work piece stops fixed on the right and 2 on the left in the X direction, for movement in the Y direction - 10 adjustable support arms in the X direction, each with a rear stop - All stops are controlled by the program - The suction plates are fixed via the patented 2-circuit clamping system, eliminating the need for hoses. - 8 smooth support rails, automatically retractable - 2 push buttons for the workpiece clamping/releasing function Additional 2nd vacuum pump, 90 m3/h 1 additional central stop row, for centering workpieces Chip conveyor 1 main spindle - Drive power: 10.0 kW in S-6 operation - 7.5 kW in S-1 operation - Tool holder: HSK F63, taper diameter = 38 mm, similar to DIN 69893 - Speed range: infinitely variable RPM, programmable 1 centrally integrated CNC axis, rotating 360 degrees - for all adapter units, with torque support on the main spindle and pneumatic interface 1 vertical drilling unit l14 with 6 spindles, horizontal and attachment unit for a dado cutter - Horizontal drilling units with 2 outputs each Attachment unit for a dado cutter - Swivel range: 0 or 90° Control system ICOS CNC Modern, powerful PC-based control system with: - User-friendly interface with Windows standards - Trajectory control of all servo axes - Job list / order processing - IMA backup and recovery system on two hard drives - Uninterruptible power supply (UPS) IMAWOP software package - for dialog-oriented creation of CNC machining programs - - 3D view and basic simulation of the programmed workpiece, the suction cups and consoles including tool and adapter display.

Condition: used, functionality: fully functional, Year of construction: 2012, machine/vehicle number: 30012, overall weight: 2,000 kg, total length: 6,600 mm, total width: 1,700 mm, Equipment: CE marking, documentation/manual, The long bending machine is exclusively used for bending and folding sheet metal (e.g., galvanized steel sheet, aluminum sheet, copper sheet, etc.) up to a thickness of max. 1.0 mm (according to the manufacturer). It is stable, reliable, and ideal for workshops or metalworking. Very good condition, ready for use. Technical data according to the manufacturer: - Machine type according to manufacturer: Long bending machine 6020/A - Year of manufacture: 2012 Isdpfx Asz Akgweh Ejtl - Machine number: 30012 - Bending angle: approx. 140° - Weight: approx. 2000 kg - Dimensions: 6.60 m x 1.70 m - Electrical connection: Three-phase 230 V/400 V – 1.5 kW 230 V/400 V – 2.2 kW (AV) - Bending angle: 90° - 180° - Galvanized steel sheet up to 1.0 mm - Aluminum sheet up to 1.5 mm - Smallest bend radius depending on sheet thickness and sheet type: 15 mm - Main switch, hydraulic unit, upper die, bending die, indicator light, control, safety stop, foot switch, emergency stop bar, stabilizers - Accessories: Hand shears I am available at any time for further information! - No guarantee, no warranty, no return or exchange. - Signs of wear, ready for use. - Sold as seen! - Payment: Cash upon collection/advance payment.

Condition: used, Year of construction: 2012, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Itsdewc Snfepfx Ah Eol Weights Empty weight: 16.892 kg Functional Lifting capacity: 230 kg Working height: 2.810 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 2610 m Transport dimensions (LxWxH): 9,8x2,49x3,18 Production country: US Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 860SJ Year of build: 2012 Condition: Used Data: Max. working height: 28,10 m Platform height: 26,10 m Max. reach: 23,40 m Platform lifting capacity: 230kg Platform dimensions LxW: 2,44 x 0,91 m Swivel range: endless Max. climbing capacity: 45% Total dimensions LxWxH: 12,30x 2,49 x 3,04 m Transport dimensions LxWxH: 9,80 x 2,49 x 3,18 m Movable up to working height: 28,10 m Wheel pressure max.: 82kN Ground clearance: 0,30 m Drive type: Diesel Own weight: 16.892 kg Special features: Rotatable work basket basket arm/vertical rotation angle +70°/-60° four-wheel drive pendulum axle

Condition: used, Year of construction: 2014, mast type: telescopic, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 12.510 kg Functional Lifting capacity: 230 kg Working height: 2.240 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 2040 m Transport dimensions (LxWxH): 10,27x2,48x2,6 Production country: US Additional information Itodpfx Ajwc Snlsh Ejl Please contact Christian Theißen for more information Manufacturer: JLG Model: 660SJ Year of build: 2014 Condition: Used Data: Max. working height: 22,43 m Max. platform height: 20,43 m Max. reach: 18,21 m Drive type: Diesel Total dimensions LxWxH: 10,20 x 2,48 x 2,60 m Length of transport position: 7,85 m Height transport position: 3,09 m Track widining: 0 m Platform dimensions LxW: 2,44 x 0,92 m Max. basket load: 230 kg Swivel range: 360° Overhang: 1,15 m Movable up to working height: 22,43 m Max. Pitch angle: 45% Wheel pressure (Support pressure): - kN Ground clearance: 0,26 m Own weight: 12.510 kg Special features: Rotatable work basket, basket arm/vertical rotation angle 65°, four-wheel drive, pendulum axle, permanently installed generator for 230V, socket in the basket.

Condition: not inspected (used), Tenoning spindle 1 St. Number of milling agregates 1 St. Spindle diameter 40 mm Small-scale window manufacturing consisting of: The machines remained in working order at our customer's site until they were dismantled ----- 1) Haberkorn FZS1 slotting machine. 2) Okoma SF3F table milling machine with glazing bead saw. 3) Oertli tooling for the Haberkorn and Okoma machines. 1 set of wooden windows IV 68/78/88 and 1 set of wood-aluminum windows IV 68/78, manufactured in 2011 4) Götzinger OBM Plus corner hinge and olive drilling machine, Maco MultiMatic hardware. (Hardware can be converted for an additional charge upon request!) ----- Technical Manufacturer's Description: - Haberkorn FZS1 slotting machine with automatic feed, - Stepless height adjustment D 40 mm Crosscut saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Pneumatic horizontal positioning, manually adjustable - Guard and dust extraction hood with extraction port diameter: 100 mm Slotting spindle D 40 mm: - Power: 7.5 kW - Speed: 4200 rpm - Working length: 252 mm - Maximum tool diameter: 340 mm - 220 mm stroke, stepless height adjustment via Precision ball screws - Guard and dust extraction hood with extraction port diameter: 180 mm - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65 degrees - Automatically changing counterweight (programmable) - Pneumatic clamp - High-precision electric degree indicator - Automatic length compensation - Counterweight at every angle setting in the cutting plane Optional equipment: - Laser for workpiece positioning - Pneumatic saw position - Length stop LA 2500 mm + 1850 extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools - Dust extraction ports 2 x 120 mm - Spindle length 270 mm - Counter gauge with fine adjustment and turret Itsdoxa Hi Nopfx Ah Eel - Triple stroke, maximum stroke height 90 mm - Glass strip cutting saw with protective and extraction hood, 80 mm diameter - 8-roller feed unit with stand and hold-down arm, required for the glass strip cutting saw attachment - Pneumatically controlled dispensing unit for edge drive, speed 6000 rpm - 2 x 3 kW motors - Mounting diameter 30 mm ----- 3) Oertli tools for Haberkorn and Okoma machines - 1 set of wood window IV 68/78/88 - 1 set of wood-aluminum window IV 68/78 Tools are sold in the condition, scope, and with accessories as currently available in our stock. Note regarding window cuts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems mentioned and drawn. [Note regarding window cuts, tool drawings, and tool system listings:] ----- 4) Götzinger OBM Plus Corner Hinge and Olive Drilling Machine -Corner and scissor hinges + handle olive drilling -Vertical drilling unit with: -Quick-change drill head device -Pneumatic feed via foot valve -1x Olive drill head 24 mm -1x Double-head corner hinge -Maco MultiMatic fitting -1x Adjustable flip stop, left, with 6 stops -1x Adjustable flip stop, right, with 6 stops -1x Machine stand complete with storage tray -220/400 V, 60 Hz, 1.3 kW ...

Condition: used, Year of construction: 2013, turning diameter 660 mm turning length 1500 mm control FAGOR centre height 330 mm spindle passage 82 mm number of spindle speeds 30-2000 U/min bed width 390 mm rapid speed X/Z 4 - 8 m/min tailstock quill diameter 75 mm Main spindle capacity 15 kW weight of the machine ca. 3200 kg Itodpfx Aeub Uu Ioh Eel dimensions of the machine ca. 3800 x 1800 x 2150 m First commissioned in 2015, very good condition - FANUC Series 18i TB Control, Manual Guide i Function - Central control panel for machine and CNC control on the pedal arm 45 ° swiveling - 12-fold tool turret - Fanuc drive with 30 kW (50% ED) - Chip conveyor - Bezel - 3 jaw chucks

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Ijdewfg E Dopfx Ah Eetl

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Isdpfxsx R Uw Sj Ah Eotl Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, Year of construction: 2008, mast type: telescopic, fuel type: diesel, Equipment: all wheel drive, Drivetrain Drive: Wheel Weights Empty weight: 16.892 kg Functional Lifting capacity: 230 kg Working height: 2.810 cm Dimensions of cargo space: 980 x 249 x 318 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Max. horizontal reach: 2340 m Production country: US Iedpewd Nm Ujfx Ah Eetl Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 860SJ Year of build: 2008 Condition: Used Data: Max. working height: 28,10 m Platform height: 26,10 m Max. reach: 23,40 m Platform lifting capacity: 230kg Platform dimensions LxW: 2,44 x 0,91 m Swivel range: endless Max. climbing capacity: 45% Total dimensions LxWxH: 12,30x 2,49 x 3,04 m Transport dimensions LxWxH: 9,80 x 2,49 x 3,18 m Movable up to working height: 28,10 m Wheel pressure max.: 82kN Ground clearance: 0,30 m Drive type: Diesel Own weight: 16.892 kg Special features: Rotatable work basket basket arm/vertical rotation angle +70°/-60° four-wheel drive pendulum axle Location: 12681 Berlin immediately available

Condition: used, Year of construction: 2019, controller manufacturer: Sonstige, controller model: , _____ Description: Year of manuf. : 2019 Control : Sonstige Double unwinding reel with drive Design:Short design Band width min./max.:230 – 520 mm Coil weight max.:2 × 30 kN Number of reels:1 Coil outer diameter min./max.:1,500 – 2,000 mm Spreading range min./ max.:460 – 525 mm Coil delivery:Industrial truck Reel loading:From the front (operating side) Coil unwinding:From the underside of the coil Material:Aluminium, soft Strip thickness min./max.:0.8 – 1.2 mm Tensile strength (Rm) min./max. :100 – 250 N/mm² Strip cross-section max.:600 N/mm² Straightening capacity:See straightening diagram Iedpsycnf Sofx Ah Estl Strip speed min./max.:2 – 10 m/min Strip infeed height above floor: 2,100 mm Degree of automation:Fixed / ± XXX mm Operating mode:Jog mode on sight system parameters System stroke rate:45 rpm Working direction:Right–left, front loading with forklift truck Flatness of installation site:± 15 mm Connection voltage:400 V, 50 Hz Ambient temperature:20 – 40 °C Compressed air connection:5 bar reel :Double reel with drive :Spreading :- Manual toggle lever system with hand crank :Coil limitation :22 November 2019 :22 November 2019 :- Single arms, manually adjustable according to scales, fixed at the front via :quick-release lever and at the rear via clamping screws :Brake/drive :- 2 frequency-controlled asynchronous motors :- 2 dual-circuit safety air pressure disc brakes :Swivelling :- Manual with 180° locking via pedal :Pneumatic pressure rollers with rubberised rollers at the top :mounted on brackets. :Hydraulic spreading :- Hydraulic spreading instead of manual spreading with hand crank :- Hydraulic unit with valves and piping mounted on the reel head :Belt pull-off and belt feed Belt loop :- Control via ultrasonic sensor/laser on the unwinding side

Condition: used, Year of construction: 2021, gebraucht 2021 3966 prompt, Zwischenverkauf v Taiwan 15600 € 1 12480 € 42 mm MK 4 280 - 1.100 mm 44 - 1.500 (12) U/min Stahl: M 25; Guss: M 38 1880 mm 870 mm 2210 mm 1800 kg 470 - 1.270 mm 0,05 - 0,15 (3) mm/min 2.2 kW 260 mm 280 mm 1.725 x 715 x 180 mm 0,75 kW 635 x 520 x 415 mm 2530 mm DEMO MACHINE left/right rotation automatic feed drilling depth limit Isdpfx Aew Np Nxjh Eetl manual headstock adjustment with mechanical clamping electric height adjustment of extension arm and mechanical clamping mechanical clamping of swivel movement of extension arm central operation panel on the front side power load readout for drilling spindle hand wheel for spindle fine feed coolant equipment machine lamp box table machine and equipment according to the CE-regulations operating manual in GERMAN and ENGLISH BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2014, fuel type: diesel, Weights Empty weight: 10.714 kg Functional Mast: articulated arm Lifting capacity: 230 kg Working height: 2.029 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Itjdpfxjywuf Ae Ah Ejl Other information Delivery terms: EXW Max. horizontal reach: 1212 m Transport dimensions (LxWxH): 8,82x2,44x2,56 Additional information Please contact Christian Theißen for more information Manufacturer: JLG Model: 600AJ Year of build: 2014 Condition: Used Data: Max. working height: 20,29 m Movable up to working height: 20,29 m Platform height: 18,29 m Max. reach: 12,12 m Platform lifting capacity: 230 kg Platform dimensions LxW: 1,84 x 0,92 m Transport dimensions LxWxH: 8,82 x 2,44 x 2,56 m Swivel range: endless Drive type: Diesel Empty weight: 10.714 kg Special features: Rotating work basket, basket arm, pendulum axis, foam-filled off-road tires, PPE attachment points available.

Condition: good (used), Year of construction: 2014, fuel type: hybrid, Weights Empty weight: 2.980 kg Functional Mast: articulated arm Lifting capacity: 250 kg Working height: 2.090 cm Dimensions of cargo space: 628 x 98 x 197 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 1230 m Max swing of platform in degrees: 450 Additional information Please contact Christian Theißen for more information Manufacturer: Teupen Model: Leo 21GT Year of build: 2014 Condition: Used Data: Max. working height: 20,94 m Platform height: 18,94 m Max. reach: 12,26 m Platform lifting capacity: 250 kg Platform dimensions LxW: 1,40 x 0,77 m Swivel range: 450° Total dimensions LxWxH: 6,28 x 0,98 x 1,97 m Ground pressure: 23,7 kN Itsdpfx Ahjv Tkmve Esl Ground clearance: 0,18 m Support width one side: 4,10 m Support width both sides: 5,27 m Support length: narrow / one-sided 7,00 m / bilaterally 5,10 m Drive type: 230V/Diesel Own weight: 2.980 kg Special features: Travel drive, white rubber chain, rotating work basket 180°. Information: newly painted Location: 41468 Neuss immediately available

Condition: ready for operation (used), Year of construction: 1999, pressure 80.0 t chamfer lenght 2570 mm distance between columns 2125 mm column arm 420 mm table width 60.0 mm ajustment speed 100 mm/sec working feed 10.0 mm/sec return speed 100 mm/sec stroke 200 mm dayligth 470 mm table height 960 mm Number of working hours ~ 33.100 h oil volume 90.0 l total power requirement 9.0 KW weight of the machine ca. 5750 kg. range L-W-H 3630 x 2450 x 2550 mm - in checked conditions - machinevideo - ?v=SskqZJdQxsQ ?v=KcKjibwWAKI Equipment: - AMADA CNC control, model OPERATEUR II * Manual control for fine adjustment of the axes - CNC control OPERATEUR 2 in 8 axes (X1 X2,Y1 Y2,R1 R2,Z1 Z2) - CNC-controlled backgauge adjustment (X1 X2) - CNC-controlled vertical adjustment of the fence fingers (R1 R2) - CNC-controlled adjustment of the stop fingers left-right (Z1 Z2) - Swivel operation, front left - 1x freely movable foot switch - Top tool holder with top wedge crowning (AMADA system) - Rear safety guard (safety grid) - Side safety guard (safety doors) - CE marking - Original operating instructions * Further technical data : Adjustment range : X axis ... 700 mm X axis with workpiece in place ... 1020 mm R axis .. 250 mm Adjustment speed : X axis .. 500 mm/sec R axis ... 160 mm/sec Z1 Z2 axis .. 1000 mm/sec Positioning accuracy ± in mm : X axis .. 0.1 Isdpjyyc Dfjfx Ah Estl R axis .. 0.1 Z axis .. 1.0

Condition: good (used), functionality: fully functional, number of straightening rollers: 7, coil outer diameter: 1,400 mm, coil inner diameter: 508 mm, roller diameter: 80 mm, number of feed rollers: 2, feed roller diameter: 80 mm, straightening roller diameter: 80 mm, coil width: 400 mm, load capacity: 3,000 kg, 1. Decoiler Make: Dimeco Model: 2371 E-FPS Year of manufacture: 2006 Load capacity: max. 3 tons Strip width: max. 600 mm Expansion range: 470 – 530 mm Coil outer diameter: max. 1,400 mm Equipped with: • Hydraulic expansion • Pneumatic hold-down roller from above • 6 strip edge guide arms • Pneumatic disc brake Ijdpfstgvgpox Ah Eetl 2. Straightening Machine Make: Dimeco Model: 1676 C-VV Year of manufacture: 2000 Strip width: max. 400 mm Strip thickness: 0.8 – 4.5 mm Number of straightening rollers: 7 Number of entry and exit rollers: 2 each Roller diameter: 80 mm Equipped with: • Frequency-controlled drive • Hydraulic strip feeding aid with support table, feed tongue, hold-down arm from above • Pneumatically liftable entry roller • Lateral strip guide rollers • Pneumatically swivelling strip transfer table between straightening machine and feeder

Condition: as good as new (ex-display), functionality: fully functional, This single-sided heavy-duty cantilever rack is ideal for storing heavy long goods such as pipes, profiles, metal bars, steel beams, wooden strips, and sheet material. With a total length of approximately 13.20 meters, a height of approximately 4.00 meters, and cantilever arms of approximately 120 cm, this long goods rack offers a high storage capacity across a total of 4 storage levels (floor level + 3 levels). Each cantilever arm supports up to 500 kg, and the uprights can support up to 2,250 kg. The cantilever arms are bolted on and can be flexibly adjusted in height via a hole grid of 200 mm. The completely hot-dip galvanized material ensures long-lasting protection both indoors and outdoors – new goods available from the Wietmarschen warehouse. PRODUCT DETAILS: - Rack type: single-sided heavy-duty cantilever rack - Total length of the rack row: approx. 13.20 m - Total height: approx. 400 cm - Arm length: approx. 120 cm (made of IPE 80) - Center distance (upright spacing): approx. 131 cm - Levels: floor level + 3 storage levels - Load capacity per arm: max. 500 kg (with uniform distribution) - Load capacity per upright: max. 2,250 kg (with uniform distribution) - Upright profile: IPE 160, approx. 400 cm, including base - Hole grid upright: approx. 20 cm - First hole above base: approx. 107.5 cm (from top of base) - Top hole pair: approx. 50 cm below the upright head (from top of head) - Design: single-sided, cantilever arms bolted on - Surface: completely hot-dip galvanized - Availability: new goods SCOPE OF DELIVERY: Itedpfx Ahszz Idke Eel - 11 x uprights, approx. 400 cm made of IPE 160, including base, hole grid 20 cm - 33 x cantilever arms, approx. 120 cm made of IPE 80 (without end stops) - Including all connecting elements - Including all necessary screws - 1 x load sign Price: €5,750.00 net €6,842.50 gross You will receive an invoice with VAT shown. DELIVERY, ASSEMBLY & INSPECTION: - Nationwide delivery by our partner shipping company – freight costs depend on the postal code - Professional assembly and disassembly by trained teams is optionally available - Rack inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers is also possible PLANNING & CONSULTATION: Our planning department will be happy to prepare a non-binding offer for you – tailored to your individual requirements. Whether it's a new installation, renovation, or expansion – we will provide you with competent advice on your rack configuration. Haven't found the right one yet? Visit our website – here you will find a quick overview of many offers and variations of the products! ARE YOU INTERESTED OR DO YOU HAVE QUESTIONS? Simply contact us via message or phone call. You will find our telephone number on our company website. You can reach us by telephone from Monday to Friday, 08:00 - 16:00. Alternatively, you can send us a message with your name and number, and we will get back to you as soon as possible.

Condition: good (used), Year of construction: 2005, Truck-mounted aerial platform – Ruthmann T 265 Manufacturer: Ruthmann Model: T 265 Year of manufacture: 2005 Technical data Working height: 26.40 m Platform height: 24.40 m Lateral reach: 17.20 m Slew range: 450° Basket arm swivel angle: 200° Total weight: 7,490 kg Length: 9.35 m Width: 2.51 m Overhead clearance: 3.55 m Working platform size: 1.70 m x 1.00 m Platform load capacity: 350 kg Outriggers: Horizontal/Vertical Outrigger spread: 4.40 m on both sides / 3.45 m on one side / 2.50 m in profile Drive: Diesel Special equipment 220 V connection to the working platform Water/air pressure line to the working platform Platform exchange system Platform rotation +/- 45° Cab roof protection Itjdpogy Tu Isfx Ah Ejl Driver's license class: 3 / C1 Dates/Status TÜV (technical inspection): valid until 01/2027 UVV (accident prevention regulations): valid until 11/2026 Mileage: 197,268 km as of 11/2025 Price quoted plus statutory VAT. Are you interested? We are always happy to assist you! You can reach us from Monday to Friday between 7:00 a.m. and 4:00 p.m.! Subject to changes and errors.

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Itedpfxjzy Hqts Ah Esl Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Rotor: 600 mm diameter x 1450 mm working width Itjdszy Hdtepfx Ah Eel Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: good (used), Year of construction: 2006, machine/vehicle number: 91426, Offer 25227 Technical specifications: - Pressing force: 150 t - Working width: 3600 mm - Clearance between uprights: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustable backgauge range: 120 mm - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l - Space requirement: approx. W 3850 x H 2300 x D 1600 mm - Weight: approx. 8700 kg Iedpfx Ajwvih Neh Eetl Includes: - Swivel arm – operator panel with ATL 550 control - For pressing depth & backgauge - Motorized backgauge - Crowning device - FIESSLER Lasersafe - 4-way universal die, segmented punch tool & “gooseneck” die - Two-hand operation desk, foot pedal,