Used Swing Gate for sale (3,220)

Condition: new, Available from stock! Comparable to Behringer, Kaltenbach, Kasto, Jaespa, etc. Semi-automatic bandsaw with dual-sided mitre adjustment from 90° to 30°, stepless via scale with 0.5° accuracy. Includes the optional micro-spraying system! Hodpfx Ajwcwggjg Iofg Hydraulic lifting/lowering of the saw frame Semi-automatic sawing cycle Hydraulic material clamping / short-stroke cylinder Rapid downfeed to material top edge 30° left Ø 130 or 120x120 45° left Ø 200 or 180x180 90° Ø 260 or 300x260 45° right Ø 200 or 180x180 30° right Ø 130 or 120x120 Remnant length 25 mm

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Hsdpfxsq A I Ups Ag Iefg Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Weight approx. 4000 kg good condition

Year of construction: 1979, condition: used, machine/vehicle number: RS82/12, Technical data: 1x Demag KBK 1 pillar jib crane NL 250KG with PK chain hoist Payload at full reach 250KG / 0.25 tonne payload Height: approx. 3m UK boom: approx. 2.5m Reach: 3m Hook height: approx. 2m Complete weight approx. 350Kg with chain hoist 250Kg chain hoist Hfodpfx Agsvv N Auj Iog incl. bolt, cable drag, chassis, end cap etc. Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim Other cranes are available, load capacity 80-5000Kg, please enquire See pictures Shipping by freight forwarder or collection only by appointment

Year of construction: 1978, condition: used, machine/vehicle number: NBGMAN 3, Technical data: 1 Abus VS column slewing crane NL 1000 KG Payload at full radius 1000 KG / 1 ton payload Height: approx. 3.65m, UK boom: approx. 3.27m Projection: approx. 5m, hook height: approx. 2.75m Weight completely approx. 1000 kg including 1000KG Abus GM chain hoist (BJ2008) with floor control (2 lifting speeds) Connection to 400V 16A, swivel range 360° Test book is available Crane is dismantled and available immediately Item location is 75053 Gondelsheim Hfsdpfxer Igtye Ag Ijg Only the crane system shown in the pictures is sold Very good condition, see pictures Shipping by courier or collection by appointment

Year of construction: 2010, condition: like new (used), machine/vehicle number: MBUT134WSK, Technical data: Hfedpfxepwgr Hs Ag Ijg 1x Demag KBK 1 wall slewing crane NL 125KG with chain hoist Payload at full radius 125KG / 0.125ton payload Projection: approx. 2m Weight completely approx. 150kg with steel chain hoist 125Kg chain hoist including bolts, cable drag, chassis, end cap etc. ----- ----- Alternatively, 3m cranes with 125 or 250kg payload are also available Swivel range 300°, connection to 400V 16A Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures (example photo) Shipping by courier or collection only by appointment

Condition: used, Stainless steel knife gate valve Hsdpfx Agox Nykbo Iofg Diameter 150 mm Made entirely of stainless steel 2 units in stock See our other listings VMA Wekerom

Condition: new, sheet length: 4.000sheet thickness: 20,0cutting area width: 4000total power requirements: 22weight approx.: 20000messurements (LxWxH): 4850 x 2300 x 2180 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Hfjdpfxoxxd D Ue Ag Iog Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Year of construction: 1998, condition: excellent (used), machine/vehicle number: BS605, Technical specifications: 1 Pfaff column slewing crane NL 250KG with 110KG compressed air cable Payload at full radius 250 KG / 0.25to payload (steel construction) Hodpjiptyajfx Ag Ijfg Height: about 4.2m UK outrigger: approx. 3.3m Projection: approx. 3.5m Hook height: approx. 2.8 m Weight complete approx. 700 kg with 110 kg Demag compressed air cable Pivoting range 270° Crane is dismantled and available immediately Item location is 75053 Gondelsheim There are other cranes available, load capacity 80-5000 kg, please inquire See pictures Dispatch by forwarding agent or pick-up only by appointment

Condition: excellent (used), functionality: fully functional, Year of construction: 1989, machine/vehicle number: SI73, Technical data: 1x Demag KBK 1 column-mounted slewing crane, SWL 250kg Safe working load at full outreach: 250kg / 0.25t Height: approx. 2.83m Underside of jib: approx. 2.3m Jib outreach: 3m Hook height: approx. 1.85m Total weight approx. 400kg including anchor plate 71x71cm With Demag PK chain hoist 250kg Includes pin, cable trolley, travel trolley, end cap, etc. Slewing range: 300° Connection: 400V 16A Crane is dismantled and immediately available Item location: 75053 Gondelsheim Further cranes available, capacity 80-5000kg, please inquire Hfjdpfx Ajwv N Ezsg Ieg See images Shipping by freight carrier or collection by appointment only

Condition: new, sheet length: 4120sheet thickness: 6,0total power requirements: 11weight approx.: 8000messurements (LxWxH): 4890x2750x1820 Hjdpfx Aged Eqrgj Ijfg

Condition: new, sheet length: 3120sheet thickness: 6,0total power requirements: 11weight approx.: 6500messurements (LxWxH): 3850x2750x1700 Hjdjd Eqrmepfx Ag Ijfg

Condition: new, sheet length: 2100sheet thickness: 6,0total power requirements: 11weight approx.: 5500messurements (LxWxH): 3110x2195x1770 Our strong brand KK Kletzer                    TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 6 mm  Cutting length: 3.100 mm Cutting angle: 1,5°  number of hold-downs 15 Backgauge: 1,000 mm via CNC  Motor power: 11 kW  Strokes per minute 15 Projection: 50 mm  Length: 4110 mm  Width: 2195 mm  Height: 1770 mm  Weight: 7000 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  Hfedpfx Aofhlbdog Iog • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 3.900, -  We have many references!

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 8500messurements (LxWxH): 4650 x 1700 x 1800 Hfjdpjd Ab Hhofx Ag Iog Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 4.200sheet thickness: 13,0cutting area width: 4200total power requirements: 18,5weight approx.: 13800messurements (LxWxH): 4650 x 2270 x 2000 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Hfodpfsd Ab Hisx Ag Isg Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 5100messurements (LxWxH): 3800 x 1750 x 1700 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting Hfsdpfovap Tusx Ag Ijg • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 3.200sheet thickness: 16,0column width: 3100total power requirements: 18,5weight approx.: 11700messurements (LxWxH): 4,2x 2,050 x 2100 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Hfjdpfx Asd Ab Hleg Isg Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 3120sheet thickness: 13,0total power requirements: 30weight approx.: 13500messurements (LxWxH): 3850x3160x2000 Hfjdpfx Asd Eqrksg Ieg

Condition: new, sheet length: 4100sheet thickness: 13,0total power requirements: 30weight approx.: 15500messurements (LxWxH): 4120x2240x2235 Our strong brand KK Kletzer                    TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 13 mm  Cutting length: 4,100 mm Cutting angle: 2.3 ° Hfjdpfx Aged Tm Rcs Ijg  number of hold-downs 19  Backgauge: 1,000 mm via CNC  Motor power: 30 kW  Strokes per minute 8  Projection: 50 mm  Length: 5120 mm  Width: 2240 mm  Height: 2235 mm  Weight: 15500 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 4.900, -  We have many references!

Condition: new, sheet length: 3.200sheet thickness: 10,0total power requirements: 11weight approx.: 8100messurements (LxWxH): 4000 x 1950 x 1900 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Hfodpfxod Ab Hno Ag Iog Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 3100sheet thickness: 6,0total power requirements: 11weight approx.: 7000messurements (LxWxH): 4110x2195x1770 Our strong brand KK Kletzer                    Hsdsd Eqrnepfx Ag Ijfg TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 6 mm  Cutting length: 3.100 mm Cutting angle: 1,5°  number of hold-downs 15 Backgauge: 1,000 mm via CNC  Motor power: 11 kW  Strokes per minute 15 Projection: 50 mm  Length: 4110 mm  Width: 2195 mm  Height: 1770 mm  Weight: 7000 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 3.900, -  We have many references!

Condition: new, sheet length: 4100sheet thickness: 6,0total power requirements: 15weight approx.: 10200messurements (LxWxH): 4120x2195x1770   Our strong brand KKKletzer                    TAFELSCHER Vibration cut version Model SWT has everything you need for cutting.  We have also raised the standard in the vibration cutting design and deliver ours as well  Plate shears with automatic cutting adjustment via the touchscreens Control ELGO P40T without surcharge.  NC slotted table shears KKI Technological advantages Fast and precise cuts Stable,  durable frame construction Automatic kerf adjustment Easy handling Low maintenance costs High safety standard Use of components from well-known manufacturers Low unit costs   Technical specifications:  Sheet thickness: 6 mm  Hfsdped Tm Rbsfx Ag Iog Cutting length: 4.100 mm Cutting angle: 1,5°  number of hold-downs 19 Backgauge: 1,000 mm via CNC  Motor power: 15 kW  Strokes per minute 12 Projection: 50 mm  Length: 5120 mm  Width: 2195 mm  Height: 1770 mm  Weight: 10200 kg  • Stable swing cut design Cutting gap adjustment via the control - backgauge - kerf - Cutting length  • Ball screws for the back gauge • balls in the table  • Side stop 1,500 mm • 2 pcs. Support arms 1.000 mm  • Cut line lighting • Foldable up to 1,000 mm finger protection  Option:  pneumatic sheet support, EURO 4.900, -  We have many references!

Condition: new, sheet length: 3.120sheet thickness: 16,0total power requirements: 30weight approx.: 15.000messurements (LxWxH): 3.875 x 3.200 x 2.170 Hodpjd Eqrijfx Ag Isfg

Condition: new, sheet length: 3120sheet thickness: 10,0total power requirements: 22weight approx.: 12250messurements (LxWxH): 3850x3060x1850 Hfsdpfx Aged Eqrls Ieg

Condition: new, sheet length: 3120sheet thickness: 6total power requirements: 11weight approx.: 6500messurements (LxWxH): 3840x2050x1700 Hfjdpfsfrz H Dox Ag Ijg

Condition: new, sheet length: 3.200sheet thickness: 10cutting area width: 3200total power requirements: 15weight approx.: 7700messurements (LxWxH): 3800 x 1820 x 1920 Hedpfxovap The Ag Ijfg Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)