Used Sun Pdl 3000 for sale (10,248)

Condition: used, tank capacity: 3,000 l, GENERAL Equipment: Disk valve, spray nozzle Design: upright Notes: Small dents and several small holes (corrosion) in the insulation jacket; 1 overflow pipe inside the tank; outlet pipe dented (see photos) External diameter: 1,930 mm Internal diameter: 1,690 mm Total height: 2,400 mm Insulation: present Top head: conical base Location: Bremen Nodpoyclaaefx Ad Njcl Nameplate: Volume: 3,000 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,400 mm Previous application: dairy TANK Bottom: dished end Support design: feet Number of feet: 4 pcs INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Manhole / dome: in top head (DN 500) Outlet: 80 mm Remark: slight residues MATERIAL QUALITY Material of feet: stainless steel

Condition: used, tank capacity: 3,000 l, GENERAL Ncsdpfx Ajyck Ngsd Nol Design: rectangular Remarks: 2-chamber tank (1 x approx. 2000 liters, 1 x approx. 1000 liters); internal height approx. 1000 mm; opening chamber 1: approx. 1,260 x 1,330 mm, opening chamber 2: approx. 1,260 x 750 mm; side walls slightly curved outwards Total width: 2,430 mm Total height: 1,650 mm Total length: 1,650 mm Top: open Location: Bremen Volume: 3,000 liters Product-contacting material: V2A 1.4301 (AISI 304) Condition: used Last application: water tank for agricultural use TANK Base: height-adjustable legs Number of legs: 4 EQUIPMENT Outlet: 50 mm MATERIAL CHARACTERISTICS Outer surface: marbled Legs material: stainless steel

Condition: used, tank capacity: 3,000 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: Cone height approx. 1,250 mm Inner diameter: 1,490 mm Total height: 3,200 mm Max. overpressure: 0.3 bar Location: Bremen Nameplate: Vacuum: 1.0 bar Volume: 3,000 liters Cylinder wall thickness: 5.1 mm Product contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,050 mm Last application: cosmetics Ncedpfjyckq Rex Ad Nsl VESSEL Max. allowable operating temperature: 130 °C Bottom: conical bottom Mounting type: on feet Number of feet: 4 pieces EQUIPMENT Manhole / dome: in the top head (DN 500) Outlet: DN80 DIN 11851 Note: slight residues, metallic discoloration inside MATERIAL QUALITY Feet material: stainless steel TECHNICAL DATA / MEASUREMENTS Bottom wall thickness: 4.6 mm Top wall thickness: 8.4 mm

Condition: used, Year of construction: 1998, Technical details: x-travel: 3000 mm Ncsdpfxsychids Ad Njl y-travel: 600 mm z-travel: 800 mm table surface area: 3.600 x 650 mm max. table load: 2.800 kg control: TNC 426 HEIDENHAIN turning speeds: 6.000 1/min tool change unit: 30 Pos. taper ISO: SK 50 rapid motion - x-axis: 30 m/min rapid motion - y-axis: 30 m/min rapid traverse Z-axis: 30 m/min spindle drive: 31 / 21,5 kW total power requirement: 45 kW dimensions of the machine ca.: 5,5 x 3,4 x 3 m weight of the machine ca.: 15,5 t 3-axis vertical machining-center, prepared for 4th axis (wire and plug), internal cooling device 40 bar, chip conveyor, el. handwheel HR 410, 3D-touch probe, direct measuring system, dividing wall, twin table machining, flush gun, table elevation 100mm, bed flushing, coolant of spindle (oil), approx. 53.000 switch on hours, 18.500 spindle hours *

Condition: ready for operation (used), Year of construction: 2002, This HONESS V250-3000 was manufactured in 2002. A profile punching machine for tubes and profiles, it features a self-centering product clamp and interchangeable clamping jaws for various tube types. It can handle tubes up to 100 mm wide and 80 mm high, with a maximum punching diameter of 40 mm. Ideal for high-speed punching with a carriage travel speed of 40 m/min. Contact us for more information about this machine. • Workpiece clamping: • Self-centering product clamp, gripping the tube from the outside • Interchangeable clamping jaws for different tube/profile types • Adjustable clamp position for accurate alignment • Workpiece dimensions: • Max product width (single-sided punching): 100 mm Njdpfx Aoycfytsd Njcl • Max product height (single-sided punching): 80 mm • Max product height for through holes: 60 mm • Max travel of product clamps: 3,100 mm • Minimum distance from tube end to first punchable hole: 30 mm • Punching capacity: • Max punching diameter (as delivered, through holes): Ø40 mm • Punching station: Single vertical punching cylinder • Max punching force: 250 kN at 220 bar working pressure • Max vertical stroke of punching cylinder: 80 mm • Performance: • Max strokes per minute: Dependent on cylinder stroke setting and hole pitch • Clamp carriage travel speed: approx. 40 m/min • Positioning repeatability: ±0.1 mm • Machine size and range: • Punching machine working range: > 3.10 m • Support table length: 3.00 m

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 900 mm, number of axes: 5, This 5-axis FAMU ACTIVE FIVE 3000 was manufactured in 2010. It features extensive travels of 3000 × 1200 × 900. Notably, the electrospindle and Z axis components were replaced in March 2025, and the X axis components in 2024, ensuring enhanced reliability and performance. If you are looking to get high-quality milling capabilities consider the FAMU ACTIVE FIVE 3000 machine we have for sale. Contact us for more information about this machine. • Service/Upgrades: • March 2025: Electrospindle replaced; Z-axis ballscrew, guides, and linear blocks replaced • 2024: X-axis ballscrew, guides, and linear blocks replaced Ncsdpfxjyca I Ej Ad Nel

Year of construction: 1999, condition: ready for operation (used), - USED - 6-AXIS SYNCHRONIZED CNC PRESS BRAKE WITH HYDRAULIC CROWNING AXIS: Y1 - Y2 - X - R - Z1 - Z2 BENDING LENGTH: 3100 mm Ncsdpfxjrk Sg Ro Ad Nsl TONNAGE: 165 ton THROAT DEPTH: 450 mm DISTANCE BETWEEN UPRIGHTS: 2600 mm OPEN HEIGHT: 440 mm UPPER BEAM TRAVEL: 250 mm APPROACH SPEED: 100 mm/sec RETURN SPEED: 120 mm/sec WORKING SPEED: 0-10 mm/sec MOTOR POWER: 18,5 kW CONTROL UNIT: DELEM DA 65 WEIGHT: 12020 Kg OVERALL DIMENSIONS: 4100 x 1880 x 2920 mm NOTE: No 2 FRONT SUPPORT BRACKETS; BOTTOM HYDRAULIC TOOL LOCKING

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Ncsdpfjvvkmbex Ad Nol

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Storage location: Nattheim Nodpjvvkblofx Ad Necl

Condition: ready for operation (used), Year of construction: 2017, controller manufacturer: FANUC, number of axes: 2, This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information. • Max. swing over bed: approx. 400 mm • Max. turning diameter: approx. 400 mm • Distance between centers: 3,000 mm • Bar capacity: approx. 105 mm • Spindle • Main spindle: horizontal • Spindle bore: approx. 105 mm • Spindle nose: A2-type (depending on configuration) • Speed range: variable (CNC-controlled) • High-torque spindle suitable for heavy turning • Axes • X-axis: cross slide • Z-axis: longitudinal slide • CNC-controlled feed and rapid traverse • Tool system • Turret: CNC tool turret • Number of tool stations: depending on configuration • Suitable for internal and external turning • Control system • CNC control: Fanuc / Siemens (depending on configuration) • Full CNC contouring and threading capability • Application • Medium to heavy-duty turning • For shafts, pipes, flanges, and general production parts • Suitable for series and job-shop production Ncsdpfx Aeybbiuod Nsl

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC punching machine with only approx. 11,600 operating hours, immediately available Manufacturer: TRUMPF Model: TruPunch 3000 - 1600(S11) Year of manufacture: 11/2013 Operating hours, approx.: only 11,600 h Sheet format: Large format TECHNICAL DATA: Working area: 3,000 x 1,500 mm, with repositioning Max. workpiece weight: 160 kg Punching and hold-down force: 180 kN and 20 kN Max. stroke rate: Punching: 800 1/min, Marking: 2,500 1/min Dimensions (L x W x H): 6,500 x 6,203 x 2,252 mm SPECIAL EQUIPMENT: - MultiTool function - MultiShear function - Marking / Fast embossing function - Deburring and roller technology - Adaptive stroke calibration - Punch slug breakage monitoring - Lowerable die - Spray degreasing for dies with fill level monitoring - Additional clamp - Sheet collision detection - Stop pin, outer side, left position outside STANDARD EQUIPMENT: Machine: - Working area 3,000 x 1,500 mm (with repositioning) - Rigid C-frame for easy access - Coordinate guidance for high-precision machining - Linear magazine with 17 tool stations and 3 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning device with programmable hold-down - Ball tables - Parts chute Ncjdpfxjxn Tywo Ad Nsl - Programmable support table - Good parts container - Scrap container - Automatic shut-off mechanism - Transport and installation device - Stop pin (right side, inside) - Foot switch for closing the clamps Punching head: - Servo-electric punching head - Rotatable single-tool adapter - Programmable hold-down - Tool length compensation - Spray degreasing for punch - Punch slug extraction - Forming - Manually adjustable pressing force - Stroke counter for punch - Monitoring of fill level for thread-cutting and tool lubrication Control: - Control system based on Bosch MTX CMP 70 - Operating panel with 17" touchscreen - NC program management - Integrated technology data - Teleservice via Internet - Integrated e-shop - Production planning - Programming - Advanced workshop programming - Data transmission - USB interface Safety: CE marking (ex works) Dual-beam light barriers

Condition: excellent (used), Year of construction: 2011, Krauss Maffei KM 420-3000 CX Injection Moulding Machine Year of manufacture: 2011 Control system: MC5 Ncsdpfx Ajydbbved Nol Clamping Unit: Clamping force: 4,200 kN Tie bar spacing (H x V): 900 x 800 mm Platen dimensions (H x V): 1,400 x 1,250 mm Min. mould height: 780 mm Max. daylight between platens: 1,400 mm Ejector stroke: 250 mm Ejector force (forward/back): 95.4 / 48.6 kN Max. mould weight: 6,700 kg Injection Unit: Screw diameter: 80 mm Injection pressure: 1,856 bar Shot volume: 1,608 cm³ Shot weight (PS): 1,464 g Injection rate: 478 cm³/s Screw speed: 220 / 285 rpm Nozzle contact force: 129.4 kN Additional Equipment: 2 x hydraulic nozzle controls (GK) 2 x hydraulic core pulls – moving platen 1 x hydraulic core pull – fixed platen Masterbatch dosing unit control 14 GK zones Electrical and General Data: Pump motor power: 75 kW Installed heating power: 36 kW Power supply: 400 V / 50 Hz Oil volume: 1,075 l Machine weight: 23.7 t Dimensions (L x W x H): 7.3 x 2.6 x 2.5 m

Condition: used, Year of construction: 1984, second hand Make Löwer Type ZA 3000 Year of construction 1984 Machine no. 5485 Nodpfx Adevwf I Ao Necl Motor 1.5 kW motorized brakes Number of spindles 2 x vertical saw, horizontal milling cutter Clamping height 200 mm Diameter 40 mm Cross-cut saw Table size 800 mm x 350 mm Rotatable stop Stop ruler 2000 mm, Festo LAS stop system Manual workpiece clamping Extraction connection 120 mm Required space approx. 1700 mm x 1700 mm x 1600 mm Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition, as viewed, without overhaul, without guarantee and warranty

Condition: used, Year of construction: 2022, Plasma cutting system Manufacturer: Swift Cut Model: Pro 3000 Year of manufacture: 2022 Travel range X/Y: 3,000 x 1,500 mm Power source: Hypertherm Powermax65 SYNC Max. sheet thickness (mild steel): 16 mm Max. sheet thickness (stainless steel): 12 mm Max. sheet thickness (aluminium): 12 mm Table length: 3,000 mm Working width: 1,500 mm Ncodoyazzbepfx Ad Nol Table width: 1,500 mm 20126

Condition: good (used), Offer 26038 Technical data approx.: - Plate length approx.: 3000 mm - Plate width approx.: 2500 mm Ncsdpfeyc T Dtex Ad Nsl - Plate height without base frame approx.: 350 mm - Plate height with base frame approx.: 870 mm - Top plate thickness approx.: 75 mm - 9 T-slots in table surface, length: 3000 mm - Center distance of T-slots in table surface each: 250 mm - Center distance of T-slots from outside edge: 125 mm - T-slot width approx.: mm - T-slot depth approx.: mm - Required space: L 3000 x W 2500 x H 870 mm - Weight approx.: 8000 kg

Condition: good (used), Year of construction: 1998, Column jib crane, overhead crane, workstation crane -Manufacturer: VETTER, Column jib crane type TS10-7.0, lifting capacity 1000 kg -Base plate: Ø 910 mm -Load capacity: 3000 kg -Chain hoist: Vetter type SIE 10F, year of manufacture 1998 -Lifting speed: 2.8/0.9 m/min -Drive system: SIE 30 20/5 m/min Ncsdpfx Aeyax E Ded Nel -Swivel drive: yes -Projection: 6025 mm -Total height: 3090 mm -Hook height: 2950 mm -Swivel range: 360° -Transport dimensions: 6740/1750/H2080 mm -Empty weight: kg

Condition: good (used), Year of construction: 1998, Column jib crane, overhead crane, workstation crane -Manufacturer: VETTER, Column jib crane type TS10-7.0, lifting capacity 1000 kg -Base plate: Ø 910 mm -Load capacity: 3000 kg -Chain hoist: Vetter type SIE 10F, year of manufacture 1998 -Lifting speed: 2.8/0.9 m/min -Drive system: yes -Swivel drive: yes -Projection: 6025 mm -Total height: 3090 mm -Hook height: 2950 mm Ncsdsyaxyzjpfx Ad Nel -Swivel range: 360° -Transport dimensions: 6740/1750/H2080 mm -Empty weight: kg

Year of construction: 2014, condition: used, machine/vehicle number: DB407803A, Technical data: - Manufacturer: Cefla - Type: TR 3000 - With own control cabinet - Feed speed adjustment ~ 2,2 - 20m/min. - Emergency Stop - Display converter - Year of manufacture: 2014 - Transport length: 3,000 mm - Working width: 1,300 mm - Roller length: 1,450 mm Nedpfoyatdzsx Ad Njcl - Working height: 900 +-20 mm - Roller diameter: 65 mm - Roller pitch: 125 mm - Adjustable feed (manual): 3-15 m/min - Installed power: 0.8 KW - Location: in storage

Condition: good (used), Year of construction: 2009, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding fume filter, welding fume extraction, flue gas extraction fan, filter system Cartridge dust extraction system, cartridge filter unit, cartridge filter -Manufacturer: HPS, Filter system cartridge filter series ECO -Type: Aerodust Eco 1/1 - 3000 U -Motor power: 2.2 kW -Volume flow rate: 3000 m³/h -Opening: Ø 250 mm / 200 x 200 mm Ncedpfx Aoyapxuod Nol -Dimensions: 1120/1040/H2680 mm -Transport dimensions: 2680/1040/H1120 mm -Weight: 579 kg

Condition: good (used), Year of construction: 2011, ERMONT Top Tower 3000 drum mixer for asphalt plant Year: 2011 Nedpfxjxzvbdo Ad Nscl Capacity: 200 tons/hour

Condition: reconditioned (used), functionality: fully functional, Press Brake Brand: HACO Ncsdpfx Asyapdqod Nsl Capacity: 3000 x 135T Distance between uprights: 2600 mm Throat depth: 250 mm Ram stroke: 120 mm Opening: 325 mm Descent speed: 10 mm/s Working speed: 10 mm/s Return speed: 60 mm/s Table height: 915 mm Hydraulic power unit: 10 HP Without pit Supplied with AMADA PROMECAM tooling Backgauge with digital display Weight: 8T Equipped with new tooling

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 22,000 rpm, number of axes: 5, This 5-axis OMV Active Five 3000 was manufactured in 2008. It features a fixed table with a tilting head, Heidenhain TNC-530 control, and a travel range of 3000 x 1800 x 850 mm. The spindle operates at 22,000 rpm with a HSK63A taper and a 30-position tool changer. If you are looking to get high-quality milling capabilities, consider the OMV Active Five 3000 machine we have for sale. Contact us for more information. Ncodsx D H Duopfx Ad Nel • Head rotation: B 360° / A ±105° • Tool changer: 30 positions • Table size: 3100 x 1100 mm • Optical scales: Yes • Options/Features: • Torque motor head • Laser tool presetting • Laser measuring system

Condition: good (used), Year of construction: 2020, Equipment: safety light barrier, CNC ESA, 3 axes Y1 Y2 X and manual R, manual table crowning, table for crushed bend, DSP LASER, year 2020 Ncsdpfoyanl Hox Ad Nol

Condition: new, plate width 3000 mm plate depth 1000 mm plate height 600 mm weight 4200 kg GERD WOLFF clamping cube 3000 x 1000 x 600 mm If you cannot find your desired size, simply send us an email with the completed PDF form. We can then provide you with a custom plate tailored to your requirements. T-slot size: 38 x 22 T-slot spacing: 140 Number of slots: 10 Edge distance: 80 Weight: 4200 kg Casting quality HT250 Flatness less than 0.12 mm Surface machined according to DIN 876/II Keywords: Clamping cube, Cubic clamping table, Multi-sided clamping, Angle clamping cube, Precision cube, CNC clamping cube, Clamping angle, Machine cube, 90-degree Ncjdpovu Hmbsfx Ad Nel clamping device, Drilling cube, Modular clamping cube, Workpiece positioning, Mounting cube, Fixing cube, Clamping block

Condition: new, Year of construction: 2025, table length 3000 mm table width 2000 mm table height 200 mm weight 1700 kg Manufacturer: GERD WOLFF Technical Details: • Length 2000 mm • Width 3000 mm • Height 200 mm • Weight 1700 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 8 height-adjustable support legs • Available with a matching accessory set (optional) Ncodpfx Adsuia Ntj Nol • Plate thickness: 25mm Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table