Used Suction Cup for sale (3,529)

Condition: used, Imatronic Numerical Control with ImaWop 8.0 Software (software updated in 2020) Working range on X axis mm 7000 Working range on Y axis mm 1400 Full table with support panel for positioning the suction cups Suction cups can be manually positioned on the work surface using a laser indicator No. 2 vertical electrospindles with C axis with automatic tool change Automatic tool changer with 18 positions on the back of the machine Drilling head with 21 spindles arranged as follows: * N° 11 verticals on X axis * N° 10 verticals in Y axis Edgebanding unit with glue pot and pre-melter for EVA glue (glue pot new in 2023) Nordson pre-melter for PUR bonding on Folding panels No. 1 blade aggregate (end cutter) No. 1 trimming aggregate No. 1 cross-shaped aggregate with 4 horizontal drilling lines No. 1 blower aggregate 2-position edge storage unit Front protection and safety system with carpets Full protection cabin (not original IMA) TECHNICAL DETAILS TO BE CHECKED Crjdpsw El Nhefx Aiiei

Condition: good (used), Load capacity: 125 kg Demag lifting motor (with chain hoist): Operated via Hubfix Width: 450 mm Height: 360 mm Depth: 220 mm Weight: approx. 12 kg Condition: good, second-hand Cjdpfx Aisxat H Ijiori

Condition: good (used), Year of construction: 1993, Lifting capacity: 1000 kg. Crsdpfxex Dr E Ds Aiisi With power connection. Vacuum pump. Weight: 85 kg. Condition: good, second-hand

Condition: used, overall weight: 25,000 kg, axle configuration: 3 axles, first registration: 10/2016, next inspection (TÜV): 11/2026, Cuppers LVA 09-16 AL 3-deck livestock trailer (12324) * Hub axle * Hydraulic loading ramp * Lift axle * BPW axles * Partition gate * Drinking trough * 3 x 18.40 = 55.20 m² * Unladen weight: 8,040 kg * MOT (periodic technical inspection): 11/2026 * Next inspection: 05/2027 -----Internal vehicle number: 12324 Errors and prior sale excepted. Crodpfxszq Nwde Aiioi

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, overall weight: 560 kg, total length: 1,870 mm, total width: 1,040 mm, total height: 1,550 mm, compressed air connection: 6 bar, positioning accuracy: 0.01 mm, repeat accuracy: 0.01 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality standards and guarantee the depaneling machine a long service life and high reliability. Made in Germany Semiautomatic depaneling - solutions on demand The LOW 4322 depanelling system enables fast product changeover while maintaining short depanelling and handling times. The insertion of the blank PCB is done with a parallel shuttle, pick-up and fixation with pin clamping technology and if necessary in combination with vacuum suction cups. This machine is equipped with: • a shank and disc tool separating module on Z-axis (automatically rotatable 0-90) • X-Y cross stitch module in linear motor technology with high resolution measuring system • 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors • Alu profil frame with two maintenance doors - left and right. • Standard vision system base module for teach-in programming (camera area 400 x 330 mm) • Working area is 420 x 330 mm • Automatic cutter length processing (only in combination with shank separation module) • Remote maintenance/support via remote connection (TeamViewer) or provided by the customer • Touch IPC with Windows operating system • Laser axis measurement incl. protocol Crjdpfxjznr Sle Aiisi • air ionization • Cutter breakage control for end mills only • Preparation for vacuum clamping technology • ESD window and sliding doors Optionally a vacuum cleaner unit can be offered later.

Condition: good (used), mileage: 540,429 km, power: 375 kW (509.86 HP), first registration: 01/2018, fuel type: diesel, axle configuration: 6x2, wheelbase: 6,200 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, total length: 10,200 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2018, Equipment: AdBlue, central locking, electric window regulation, fog lights, onboard computer, retarder, soot filter, spoiler, = Additional options and accessories = - Roof spoiler - Refrigerator - Particulate filter = Notes = Daf XF 510 6x2 SuperSpaceCab - Livestock Cuppers 3 deck - Ventilation - Lifting roof - Loadlift MY: 01-2018 KM: 540429 XLRASH4300G173577 Cuppers 3 deck livestock body Loadlift Lifting roof Ventilation Euro 6 AS Tronic Retarder = Further information = Technical data Number of cylinders: 6 Engine displacement: 12,902 cc Axle configuration Suspension: Air suspension Maximum front axle load: 8,000 kg Rear axle 1: Twin tires; Max. axle load: 11,500 kg Rear axle 2: Twin tires; Lift axle; Max. axle load: 7,500 kg Weights Unladen weight: 11,935 kg Crodezyb R Iepfx Aiioi Payload: 14,565 kg Gross vehicle weight: 26,500 kg Condition Technical condition: good Visual condition: good Identification Registration number: 49-BVH-3

Condition: used, Overall height 320cm Arm length 350cm Manual rotation 360° Ventouse gantry 220cm/120cm Adjustable in length and width 8 suction cups of 30 cm diameter Maximum lifting height ± 140 cm Minimum ground clearance +- 10cm Lifting capacity 175kg Electrical rise and fall Manual rotation 380V Crjdszyfxcjpfx Aiisi

Condition: good (used), Year of construction: 2001, Lifting capacity: 500 kg Horizontal/vertical, swivelling. Height: 1300 mm Width: 1150 mm Depth: 1150 mm Net weight: 120 kg Codpjy Tv Anjfx Aiijri Condition: good, second-hand

Year of construction: 2022, condition: new, Lundberg WasteTech 400 All-in-one Unit for Trim Edge Extraction Maximum extraction capacity: 6,000 m³/h (3,540 CFM) Maximum pipe diameter: 315 mm (1’-1”) Maximum extraction distance: up to 30 m (100’) Dimensions (LxWxH): 2615 x 1300 x 3330 mm (8’-7” x 4’-3” x 10’-11”) Weight: 615 kg (1,356 lbs) Extraction fan power: 15 kW (20 HP) Power connection: 3-phase, 230-460V, 50-60 Hz Crodpjy Sbc Rjfx Aiiei Noise level: 68-72 dB(A) Colour: blue, RAL5010 Including the following accessories: Antistatic unit M5/M6 filter incl. pressure monitoring sensor WT400 frequency converter Bag level sensor TubeBag System (continuous bag) According to the manufacturer, simultaneous extraction from up to 24 trim edges is possible. The unit is in as-new condition and was only operated for a few hours. On-site inspection is possible. Original purchase price of the system approx. €65,000 incl. accessory options.

Condition: used, optional equipment: Machine table in 2 support systems – left table half with TVN supports, right table half with ALU table and its own vacuum circuit. Travel ranges: X = 4400 mm, Y = 1720 mm, Z = 400 mm Tool holder HSK 63 F Motor 7.5 kW, 900 - 20,000 rpm Inverter 18 kW for spindle unit – increased power output up to 11 kW Tool changer RAPID 24 = 24 tool positions Drilling unit with 18 spindles Equipment for door processing (H = 110 mm) Codpfozxzgmsx Aiieri - for processing left and right doors - with 4 pneumatic positioning aids, each with a capacity of 20 kg - 6 reference stops with veneer overhang Laser positioning for TV system Central extraction connection above the CNC unit Vacuum pump 250 m³ Control system/control cabinet: - NUM Series 1000 with Office PC - XILOG-PLUS - Cable remote control - Analog modem with software for teleservice Swinging machining standard for 2 work areas LED display / suction cup positioning Motorized chip conveyor 3-part floor mat / front Large accessory package with vacuum suction cups, stops, etc. Machine from a carpentry business closure due to retirement Machine is still in operation and in very good condition available at location

Condition: new, Year of construction: 2025, Extraction floor, waffle floor for mineral blasting media, approx. 7000x4200mm, without grating cover, with suction nozzle and collection boxes. For questions regarding technical specifications, etc., please contact us in writing or by telephone. Crjdpjdz Ayvjfx Aiisi The machines are based on production at the Grossenlueder site, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann and Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contact persons.

Condition: good (used), Contact via WhatsApp or gbagger from renowned German manufacturer RSP in very good condition, ready for immediate use, few operating hours and very well maintained. Crjdpjvkpl Esfx Aiiei

Condition: used, Year of construction: 2003, functionality: limited functionality, 4-axis CNC machining center - UNITEAM SPRINT 4012-M CE-compliant machine 4 controlled axes axis travels: X 4870 mm - Y 1840 mm - Z 250 mm - C 360° (for handling angular heads) maximum axis speeds: X 85 m/min - Y 85 m/min - Z 25 m/min work area 4200x1300 mm 6 vacuum clamping bars with 3 suction cups each Crodpe Agwtkofx Aiiei 4 panel lifting bars 6+2 reference stops 6 retractable clamps 100 m3/h vacuum pump laser pointer 9 kW (12 hp) electrospindle - maximum rotation 18000 rpm - HSK63F connection automatic dual tool changer (8 positions on the head + 15 positions on the Y-axis) HSK63F angular head with variable inclination independent angular head with point-blade, pneumatic inclination 0/8° - 3 kW (4 hp) motor independent horizontal motor 5.6 kW (7.6 hp) - maximum rotation 18000 rpm drilling unit with 14 vertical drills - 2+2 and 1+1 horizontal drills - 3 kW (4 hp) motor 2 HSF63F tool holders included TPA Albatros numerical control (updated in 2018) with remote control panel automatic centralized lubrication front safety mats + perimeter metal fencing operating manuals + electrical diagram + CE certificate overall dimensions for transport 13500x2400x2400h mm total weight 5000 kg

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: 95566, functionality: fully functional, controller model: BIESSE XP 600, working width: 1,287 mm, spindle speed (max.): 24,000 rpm, working height: 170 mm, working length: 5,920 mm, TECHNICAL DETAILS Working area X: 5,920 mm Working area Y: 1,287 mm Working area Z: 170 mm C and A axes: available Working areas for pendulum machining: 2 Work table: ATS-HTS-EPS Automatically positionable consoles: 10 units Stop pins per console: 2 units 5-axis milling spindle Spindle power: 9 kW / 11 kW at 60 Hz Speed: max. 24,000 rpm Tool holder: HSK-F63 Cooling: Liquid cooling Drilling head BH 26 Csdpfx Aij Ah Rhqoisri Vertical drilling spindles: 16 units Horizontal drilling spindles in the X direction: 4 units Nut sawing units: 2 units Tool slots: 21 units Tool changer type: Chain tool changer MACHINE DETAILS UNICLAMP clamping systems: 6 units Control system: BIESSE XP 600 Motor power: 5.5 kW Conveying capacity: 244 / 286 m³/h Compressed air: 7–7.5 bar Total power: 25.3 kW Machine weight: 4,200 kg EQUIPMENT Automatic console positioning system EPS Pendulum machining with two working areas ATS-HTS-EPS work table Liquid-cooled 5-axis milling spindle Drilling head BH 26 Nut sawing units for X and Y directions Chain tool changer 6 UNICLAMP clamping systems Motorized conveyor belts for chips and machining waste BECKER vacuum pump Numerous vacuum suction cups Numerous HSK-63 tool holders 2 large saw blades in the tool magazine

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Codsz Ebzhjpfx Aiieri Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 300.07.009.10, functionality: fully functional, - 3-axis FORMAT4 PROFIT H22 2012 with rails and vacuum suction cups. The machine includes a linear rack tool changer with 8 tool positions and additional pick-up stations. If you are looking for high-quality CNC wood machining capabilities, consider the FORMAT4 PROFIT. - Frequency (Hz): 50.0 Hz - Phase (Ph): 3.0 - Power (kW): 15.0 kW - Duty Cycle: S6-40% - Current (A): 36.0 A - Work Table Type: Pod and rail/console vacuum bed with 6 movable support rails and vacuum suction cups - Tool Changer: Linear rack tool changer mounted under the gantry rail, plus an additional pick-up/aggregate station. Included Equipment: Foot pedal control switch, compressed air hose reel, central dust extraction ducting with flexible hose connectors, energy chain cable carriers, safety floor matting with boundary zone marking. Machine Height: 2350 mm Machine Length: 6000 mm Number of Axes: 3 Tool Stations: 8 Codpfx Ajz Nwa Noiieri Spindle Power: 12 kW Spindle Speed: 24000 RPM X-axis Travel: 3060 mm Y-axis Travel: 1210 mm Z-axis Travel: 100 mm

Condition: excellent (used), functionality: fully functional, Year of construction: 2018, machine/vehicle number: N1063G0209, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, Manufacturer: TRUMPF Model: LiftMaster Compact AL34 Year of manufacture: 2018 This TRUMPF LiftMaster Compact 1530 (AL34) is a robust industrial sheet metal handling machine, designed for efficient loading and unloading of sheets up to 3000 mm in length and 1500 mm in width. It handles material thicknesses up to 25 mm, meeting the requirements for processing heavy sheet metal. The machine is equipped with a conveyor table with multiple metal spikes that securely hold the sheet metal during handling. An integrated overhead mechanical arm with suction cups facilitates precise lifting and placement of the sheets. The suction lifting device is clearly marked with the TRUMPF LiftMaster Compact brand. The machine has a discharge conveyor belt and is currently in working order. It is possible to inspect the machine while it is in operation. The frame construction is painted in a combination of blue and white, giving it a professional, industrial appearance. The machine is clean and well-maintained, with no visible damage or wear to critical components such as the suction cups, lifting mechanism, conveyor table, and chain drive system. Additional features include a deburring unit, double-sheet detection, a synchronous feeder with separation for thin sheets (0.8 - 2.0 mm), and extended pallet removal capabilities. The loading station handles a stack height of up to 90 mm, and a soft steel grab with replaceable teeth (67 mm spacing) is included for handling finished parts. The machine has been serviced by Trumpf since its initial installation. Cjdpfxs Aay Shj Aiieri Overall, the TRUMPF LiftMaster Compact 1530 (AL34) is a reliable and comprehensive solution for automated sheet metal loading and unloading in industrial environments.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 35,981 h, punching force: 41 t, sheet thickness (max.): 15 mm, overall weight: 4,900 kg, total width: 2,250 mm, total height: 2,100 mm, product length (max.): 5,800 mm, CNC punch press manufactured in 2009. This BOSCHERT CU-Profi features 4 Amada tool stations and a parting station of 60x10 mm, including tooling. It comes with a tooling package of punch and die sets for stations A and B, along with integrated infeed and outfeed roller conveyors for efficient material handling. If you are looking to get high-quality punching capabilities, consider the BOSCHERT CU-Profi machine we have for sale. Contact us for further details. Crjdpfo Ahkaijx Aiisi - Punching Force: 400 kN (40 tons)- Maximum Sheet / Material Thickness: 12 mm to 15 mm (copper/aluminum flat bar: standard 3 – 12 mm, up to 15 mm max; copper up to 10 mm with diameter 31.7 mm, copper up to 12 mm with max. diameter 20 mm)- Maximum Workpiece Width: 15 – 200 mm- Maximum Workpiece Length: Up to 3 m- Tool Stations: 4+1 stations (4x Amada holder size B + 1x separation/cutting station 60 x 10 mm / 60 x 8 mm)- Maximum Punch Diameter: 4 x 31.7 mm or any contour within 31.7 mm (B station)- Included Tooling: Punch and die sets for stations A and B, punch reduction adapter from B to A, die holder adapter from B to A, separation/cutting tool (excluding copper stock and tooling/punches)- Stroke Rate: Approx. 85 strokes/min max. (optional fast hydraulics approx. 180 strokes/min)- Stroke Counter: 4,541,086 strokes- Operating Hours - Machine On: 35,855 h- Operating Hours - CNC On: 35,981 h- Operating Hours - Drives On: 35,799 h- Operating Hours - Hydraulics On: 8,465 h- Material Infeed: Material gripper feed via guide unit and AC servomotor; zero-waste gripper design; repeatability ±0.1 mm- Clamping System: Hydraulic Y-axis material clamping before and after the punching head- Parts Discharge: Finished part unloading system downstream of punching head; automatic scrap disposal- Support Surface: Roller support table and guide track system; large support table for copper busbars- Control System & CNC: CNC Control LABOD with graphic path control; DOS-based architecture; 3.5" floppy disk drive; tool library for 500 tools with graphical shape display; automatic overlap and cutting force monitoring- Software & Connectivity: 1x PC version (runs on Windows 95/98/NT 4.0); 1x CNC/CAD (cncKad / Metalix CAD/CAM with DXF, IGES, CADL, DWG import; server-capable); 1x Multitalk (SD card 256 MB storage for ~100,000 programs, USB interface with external cabinet cable mount, 256 MB USB stick, network port with FileZilla Server integration)- Safety: Front light curtain safety barriers and safety interlock guarding compliant with CE standards- Hydraulics: H&L hydraulic unit with oil cooling (4.7 kW standard / 11 kW optional); 160 l oil capacity- Connected Load (Anschlußleistung): 18 – 25 kVA- Power Supply (Netz): 3 x 400 V, 50/60 Hz- Control Voltage (Steuerspannung): 24 V- Required Fuse Protection: 3 x 35 A- Dimensions (L x W x H): 5.8 m x 2.25 m x 2.1 m- Machine Weight: 4,900 kg- Machine Color: Gentian Blue (RAL 5017)

Condition: reconditioned (used), Year of construction: 2011, Van Dam CQ708 cupprinter with year of build 2007. Credez Elk Tepfx Aiiji

Condition: ready for operation (used), Year of construction: 2005, travel distance X-axis: 3,060 mm, travel distance Y-axis: 1,240 mm, travel distance Z-axis: 200 mm, number of axes: 5, spindle motor power: 8,500 W, CNC Wood Machining Centre manufactured in 2005. This SCM Record 110AL features a working area of 3,060 mm in the X-axis and 1,240 mm in the Y-axis, with a maximum panel passage of 200 mm. It includes 18 total drilling spindles and a powerful 8.5 kW main electrospindle. If you are looking to get high-quality drilling and milling capabilities, consider the SCM Record 110AL machine we have for sale. Contact us for further details. • Processing type: Drilling and milling • Max. panel passage: 200 mm • Number of working fields: 2 • Table type: Flat table Csdpfoz Iy N Nsx Aiisri • Table configuration: Nesting • Table dimensions: 3,060 × 1,240 mm • Number of controlled axes: 5 • Drilling units: 1 • Vertical drilling spindles: 12 • Horizontal drilling spindles, X-direction: 4 • Horizontal drilling spindles, Y-direction: 2 • Total drilling spindles: 18 • Milling spindles: 1 • Milling spindle controlled axes: 5 • Spindle cooling: Liquid cooling • Grooving units: 1 • Grooving unit: Fixed, X-direction • Main electrospindle power: 8.5 kW • Milling spindle power: 8.5 kW • Control: PC Control • Programming software: Xylog Plus • 16-position tool magazine • Automatic tool changer • CE marking Additional equipment • Vacuum pump: 1 (suction capacity 250 m³/h) • Suction cups for workpiece clamping • Front safety mats

Condition: used, Plate lifting manipulator Lifting capacity: 250 kg Base height: 350 cm Arm length: 558 cm 4 suction cups Used, in good condition. Cjdpfx As Adqmwoiisri

Condition: used, axle configuration: 1 axle, permissible axle load (axle 1): 10,000 kg, first registration: 01/2013, total length: 10,850 mm, total width: 2,550 mm, total height: 3,900 mm, suspension: air, tire size: 275 / 70 / R22.5, wheelbase: 7,060 mm, color: green, Equipment: tail-lift, Axle configuration Tyre size: 275 / 70 / R22.5 Make axles: BPW Brakes: disc brakes Cedj Adp Efjpfx Aiiori Suspension: air suspension Rear axle: Double wheels; Max. axle load: 10000 kg; Steering; Tyre profile left inner: 30%; Tyre profile left outer: 30%; Tyre profile right outer: 30%; Tyre profile right outer: 30% Weights Empty weight: 6.280 kg Carrying capacity: 18.720 kg GVW: 25.000 kg Functional Tail lift: Dhollandia DHLSU.40, tail lift, 2000 kg History Number of owners: 1 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: used, Year of construction: 2024, operating hours: 30 h, total height: 5,380 mm, total width: 4,170 mm, total length: 5,250 mm, RECU UZ 2000 Universal Shredder in open design. Manufacturer: Recuperma Model: RECU UZ 20000 Particularly suitable for gentle and rapid composite material breakdown. Disintegration, separation of composite materials, and volume reduction. Operating principle: Credpov U Ttbefx Aiisi - Use of flexible impact elements - Size reduction through impact effect of the input material - Crushing to various particle sizes Throughput: Hourly capacity depends on the particle size and bulk density of the material to be processed. Technical data (+/- 5%): Drive power: 250 kW approx. 1490 rpm Drive type: belt drive Auxiliary drive: hydraulic unit approx. 1.5 kW Control: SIEMENS Frequency converter: SEW brand Drum diameter: 1900 mm Weight: 25 tons Wear plate lining HB450 Material loading via hopper Chain curtain as protection against ejection of parts Material discharge via sliding door Currently, the machine is defective. The price refers to the repaired machine. Unrepaired price: €370,000. Transport not included.

Condition: used, machine/vehicle number: 007871, Max. panel width: 1200 mm Max. panel length: 3200 mm Credpewimzmofx Aiisi Max. panel stack height from the ground: 1600 mm Movement system: suction cups.

Condition: reconditioned (used), Year of construction: 2021, functionality: fully functional, stack height: 100 mm, overall weight: 350 kg, total width: 810 mm, total height: 1,060 mm, total length: 2,540 mm, input voltage: 220 V, input frequency: 50 Hz, PFi Blade B3+ Specifications: Working area: 210 x 297 mm - 400 x 600 mm Grammage: 120 - 400 g/m² (depending on tooling) Cutting thickness: up to 1.3 mm Cutting speed: up to 800 mm/second Cutting tolerance: +/- 0.3 mm Blade material: Tungsten steel Feeder: Stack feeder with 5 combined lifting and dragging suction cups Feeder capacity: 100 mm Csdpfxjwlhbas Aiijri Control systems: CCD camera Power supply: 220 V, 50 Hz, 20 A, 4 kW Dimensions (L x W x H): 2,540 x 810 x 1,060 mm Weight: 350 kg The machine has been overhauled in our workshop and serviced according to the manufacturer's specifications. The warranty is 6 months. The machine is available from the Renningen warehouse near Stuttgart. Optional shipping within Germany is negotiable. On-site installation and training (within Germany) are negotiable. A maintenance contract is available.