Used Styrofoam Shredder for sale (951)

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 12298 010, overall weight: 5,000 kg, rotor diameter: 370 mm, number of blades: 60, total length: 3,186 mm, total height: 3,500 mm, total width: 2,900 mm, rotor length: 1,305 mm, power: 63 kW (85.66 HP), rotational speed (max.): 145 rpm, year of last overhaul: 2025, This machine was set up & designed to shred carpet & carpet tiles. It is water cooled & comes complete with a chiller and blower. Dusdpfx Ajxuwtuodpep

Condition: ready for operation (used), functionality: fully functional, For Sale: Massey Ferguson 7726 + MUS-MAX WT9XLZ Wood Chipper Package price: EUR 135,000 (excl. VAT) _____ 🚜 Massey Ferguson 7726 • Year of manufacture: 2017 Dedpfoylv Rzox Adpoup • Engine hours: 8,170 • Price: EUR 60,000 (excl. VAT) • Power: 255 hp rated / 280 hp max • Front linkage • Front axle suspension • Air-suspended comfort operator seat (360°) • Regularly serviced • Engine oil changed every 250 hours • Transmission: Dyna-6, 50 km/h • Load-sensing hydraulic pump: 200 l/min • 4 double-acting hydraulic outlets with mechanical control • Rear fender lift control • Electronic Linkage Control (ELC), 9,950 kg lift capacity • PTO: 540 / 1000 rpm • Air brake system for trailer _____ 🌲 MUS-MAX WT9XLZ Wood Chipper • Year of manufacture: 2009 • Operating hours: 12,170 • Wear parts replaced regularly • New tires • Tower-mounted camera • Additional LED lighting • Fully operational – still in daily use

Condition: new, For inquiries regarding this attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. BMS-F 125 Forestry Mulcher / Mulcher / NEW / In Stock & Immediately Available Price: €22,990.00 net / €27,358.10 gross Working width: 1.25 m Overall width: 1.53 m Depth: 1.05 m Height: 0.72 m Weight: 667 kg - Mulching attachment for excavators, suitable for mulching alongside riverbanks, in forests, along railway tracks, and in other hard-to-reach locations - Mulches brush and wood up to 20 cm diameter - For excavators from 10 to 20 tons - Suitable for mounting to various mounting plates - Drive designed for hydraulic motor depending on the carrier's oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge over the full hood length - Front and rear chain protection - Height-adjustable skid plates reinforced with carbide plates Duedpfx Adjyltwfepsp - Color: red RAL3020 · anthracite RAL7021 OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 228 Rotor with fixed MINI DUO tools (2 carbide tips) - 27 pieces, part number 176.02.005 OPT 465 M-BOOST angled-axis piston motor - With automatic displacement control 60-80 cm³ and overpressure valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min Intermediary adapter for BE314 Z1 - Approx. 200 mm high An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: pressure, return, and drain. For the hydraulic hood, an additional double-acting hydraulic connection is necessary. The unit is supplied without hoses, fittings, and mounting plate. We have a very large range of different Seppi M. products in stock and immediately available! Mr. Herden (phone) will be happy to support you. Financing offers available on request. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles in stock, we are also one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range! Errors and prior sale excepted! = Further information = Please contact Marius Herden for further details.

Condition: used, Year of construction: 2023, For inquiries regarding the attachment, Mr. Herden will be your contact (by phone). Seppi M. MINI-BMS 105 / 5-10 t / Forestry Mulcher / CUT CONTROL / DEMO – Unit / Year: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator attachment - Suitable for mulching along riverbanks, in forests, and other hard-to-access areas - Mulches brushwood and shrubs up to 10 cm Ø - For excavators from 5-10 tonnes - For mounting on various adapter plates Dodpjyltv Usfx Adpoup - Drive designed for hydraulic motor, depending on the carrier vehicle’s oil flow rate - Indirect V-belt drive with 5 V-belts - Reinforced housing made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the entire hood length - Front guard with chains - Rear guard with chains - Skids, height-adjustable, reinforced with tungsten carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic oil flow in l/min (min-max): 60 - 130 Spacer adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net We also have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and available for immediate delivery. An independent hydraulic power unit is recommended for the drive. 3 hydraulic lines are required: supply, return, and drain. An additional double-acting hydraulic connection is needed for the hydraulic hood. The unit is supplied without hoses, connectors, and adapter plate. Financing offers available upon request. We are an official distribution and service partner for: - Westtech - Gierking GMT - OilQuick - Weber MT - Holp - DMS - Seppi M. - Magni Telehandlers - JCB Construction Equipment - Mercedes-Benz - Iveco Additionally, with 800 used vehicles in stock, we are among the largest commercial vehicle dealers in Germany. We offer the full Seppi M. product range! Subject to errors and prior sale! Internal no.: 170048 Contact Marius Herden for further information.

Condition: new, For inquiries regarding the attachment, please contact Mr. Herden (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. Rotary Motor / NEW / In Stock & Immediately Available Price: €35,190.00 net / €41,876.10 gross Working width: 125 cm Overall width: 156 cm Depth: 111 cm Dsdeyltv Iopfx Adpoup Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as roadside verges, riverbanks, steep slopes, or for clearing around gas and electricity lines - Mulches brush and wood up to 30 cm diameter - For excavators from 13 to 30 t - Suitable for mounting on various attachment plates - Drive designed for hydraulic motor, depending on the carrier’s oil flow - Indirect V-belt drive with 5 belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front protection with chains - Rear protection with chains - Height-adjustable skid runners in sandwich construction, reinforced with a hard metal plate - Color: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST Axial Piston Motor - With automatic displacement adjustment 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow: 80 - 170 l/min OPT 372 hydraulic 190° rotary device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood The rotor requires 3 hydraulic lines: pressure, return, and leakage oil. An additional hydraulic circuit is needed for the hood. The machine is supplied without hoses or fittings. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse, all available for immediate delivery! Please contact us for more information. We are happy to provide you with a financing offer upon request. We are the official sales and service partner for Seppi M. We are the official sales and service partner for Magni telehandlers. We are the official sales and service partner for DMS. We are the official sales and service partner for Westtech. We are the official sales and service partner for JCB construction machinery. We are the official sales and service partner for Mercedes-Benz. We are the official sales and service partner for Iveco. We are the official sales and service partner for Holp. We are the official sales and service partner for OilQuick. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the full Seppi M. product range for you! Errors and prior sale reserved! = Further Information = Please contact Marius Herden for more details.

Condition: new, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone at ...). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. Rotary Actuator / MS08 / 5-10t / CUT CONTROL / NEW / In Stock & Immediately Available Price: €21,390.00 net / €25,454.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Designed for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - Suitable for excavators from 5-10 tonnes - Can be mounted to various adapter plates - Drive designed for hydraulic motor, dependent on the carrier’s hydraulic flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along the full hood length - Front protection with chain guard - Rear protection with chain guard - Adjustable skid runners, reinforced with carbide plate - Colour: Red RAL3020 · Anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide tips) 21 units, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools Dujdpfoyltvusx Adpep OPT 106 VARIO FLOW Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and overpressure valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 OPT372 hydraulic 190° rotation device OPT158 electric valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net An independent hydraulic system is recommended for operation. 3 hydraulic lines are required: supply, return, and drain. A double-acting hydraulic connection is also required for the hydraulic hood. The device is supplied without hoses, fittings or mounting plate. Mr. Herden (phone ...) will be happy to assist you. Upon request, we are pleased to provide you with a financing offer. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni Telescopic Handlers. We are an authorised distribution and service partner for JCB Construction Machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. Additionally, with 800 used vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted. = Further Information = Please contact Marius Herden for further information.

Condition: new, For enquiries about the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / MS08 / 5-10 t / CUT CONTROL / NEW / in stock & immediately available Price: €15,890.00 net / €18,909.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavator mounting - Suitable for mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5-10 tonnes - Compatible with various mounting plates - Drive via hydraulic motor, depending on the carrier’s oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along full hood length - Front protection with chains - Rear protection with chains - Height-adjustable skid plates, reinforced with tungsten carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry Rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL: - Depth limiter for rotor with fixed tools OPT 106 VARIO FLOW: Axial piston hydraulic motor with variable displacement 22 - 45 cm³ and pressure relief valve - Displacement in cm³ (min-max): 22 - 45 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow in l/min (min-max): 40 - 100 Intermediary adapter for BE314 Z1 - approx. 200 mm high - Not required when using OPT 372 hydraulic 190° rotation device Duedpfx Asyltvnedpop Optional: MS08 adapter plate incl. bolts and installation = €1,410.00 net For operation, an autonomous hydraulic system is recommended. 3 hydraulic lines are required: supply, return, and drainage. A double-acting hydraulic connection is additionally needed for the hydraulic hood. The machine is delivered without hoses, fittings, and mounting plate. Mr. Herden (phone) will be happy to assist you. We are also happy to provide a financing offer upon request. We are an authorised distribution and service partner for Seppi M. We are an authorised distribution and service partner for Westtech. We are an authorised distribution and service partner for Gierking GMT. We are an authorised distribution and service partner for OilQuick. We are an authorised distribution and service partner for Weber MT. We are an authorised distribution and service partner for Holp. We are an authorised distribution and service partner for DMS. We are an authorised distribution and service partner for Magni telehandlers. We are an authorised distribution and service partner for JCB construction machinery. We are an authorised distribution and service partner for Mercedes-Benz. We are an authorised distribution and service partner for Iveco. With a stock of 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. product range! Errors and prior sale excepted! = More information = Contact Marius Herden for further information.

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden is available to assist you (by phone). Seppi M. BMS 125 Forestry Mulcher / incl. rotary actuator / Year of manufacture: 2024 / DEMO machine / in stock & immediately available / very good condition Price: €33,490.00 net / €39,853.10 gross Working width: 125 cm Total width: 156 cm Depth: 111 cm Height: 85 cm Weight: 1,285 kg - Ideal machine for mulching in hard-to-reach locations such as along roadsides, riverbanks, steep slopes, or for clearing gas and power lines - Mulches shrubs and wood up to 30 cm Ø - Suitable for excavators from 13 to 30 tonnes - For mounting to various adapter plates - Drive designed for hydraulic motor depending on the carrier machine’s flow rate - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge along the entire length of the hood - Front chain guard - Rear chain guard - Height-adjustable skid shoes in sandwich design, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 468 Rotor with fixed tools and tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, part no. 19702266 - 33 x MONO TIP V-LOCK, part no. 19702259 - 1 x MONO EXTREME V-LOCK R, part no. 19702267 OPT 465 M-BOOST angle-axis piston motor - With automatic displacement regulation 60–80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60–80 - Required pressure in bar (min-max): 200–350 - Required hydraulic flow rate: 80–170 l/min OPT 372 hydraulic 190° rotation device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood Djdpfsyltvbex Adpsup Optional: Verachtert CW20/30/40 adapter plate incl. bolts and installation = €2,510.00 net The rotor requires 3 hydraulic lines: supply, return, and leakage oil. An additional hydraulic circuit is required for the hood. The unit is supplied without hoses or connectors. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. Our warehouse has a very large selection of various Seppi M. products that are ready for immediate delivery! Mr. Herden is happy to assist you by phone. Upon request, we can also provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. Additionally, with a stock of 800 used vehicles, we are one of the largest commercial vehicle dealers in...

Condition: excellent (used), CATALOG NUMBER 7595 Technical data: - Loading hopper inlet: 1400x1400mm - Outlet for shredded wood: diameter 160mm - Rotor working width: 600mm - Main motor: 18.5kW - Pump motor: 0.75kW - Number of knives: 14 pcs - Knife dimension: 40x40mm - V-Rotor - Screen: 10mm - Hydraulic pressure drawer - Electric auto-reverse - Dimensions (L/W/H): 1810x1210x2120mm - Weight: 1220kg ADVANTAGES Dujdpfeyh Ulyex Adpep – Made in Germany – V-Rotor – Technical documentation (DTR) – Hydraulic pressure drawer – Auto-reverse – Used chipper in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (based on exchange rate 4.2 EUR) (Prices may change subject to significant fluctuations)

Condition: excellent (used), Year of construction: 2001, CATALOG NUMBER 7089 TECHNICAL DATA - Loading hopper opening: 1020x1230mm - Rotor working width: 1020mm - Rotor diameter: 348mm - Main motor: 22kW, 400V, 50Hz - Pump motor: 0.75kW - Number of knives: 50 pcs - Knife dimensions: 35x35x20mm - Screen: 12mm - Pusher drawer - Electric auto-reverse - Dimensions (L/W/H): 2000x1130x1530mm - Weight: 970kg Duodsyh Nw Dopfx Adpsp ADVANTAGES – Auto-reverse – Like WEIMA WL 10 – German made – Pusher drawer – Very good condition – Used shredder, DTR+CE documentation Net price: 105900 PLN Net price: 25200 EUR depending on the 4.2 EUR rate (Prices may change with larger fluctuations)

Condition: excellent (used), Catalogue number 7291 TECHNICAL DATA - Infeed width: 500mm - Infeed height: 200mm - Shaft width: 630mm - Knife length: 630mm - Number of knives: 2 pcs - Sieve dimensions: 60x60mm - Lower toothed feed shaft - Lower shaft motor: 4kW - Upper toothed feed shaft - Upper shaft motor: 4kW - Feed belt length: 4100mm - Feed belt width: 400mm - Feeder motor approx. 2kW - Main motor: 55kW - Autoreverse - Feeder dimensions (L/W/H): 4670x760x720mm - Machine dimensions (L/W/H): 2550x1800x1300mm - Weight approx. 4000kg – German-made – Autoreverse – Used chipper, in very good condition Duodpfx Adex Syppjpop Original photos Net price: 118,900 PLN Net price: 28,300 EUR (based on exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7613 Technical specifications: - Feed opening width: 650mm - Feed opening height: 300mm - Shaft width: 660mm - Knife length: 660mm - Number of knives: 2 pcs - Screen dimensions: 90x100mm - 2 lower toothed feed rollers - Lower roller motor: 3kW - 2 upper toothed feed rollers - Upper roller motor: 3kW - Belt feeder - Feeder belt length: 2700mm - Feeder belt width: 630mm - Main motor: 75kW - Autoreverse - Reverse gear - Overall dimensions (L/W/H): 5350x1300x1300mm - Weight: 4200kg FEATURES – Made in Italy – Autoreverse (adjustable) – Reverse gear – Used chipper, in very good condition Djdpox S I Umjfx Adpoup Net price: 149,900 PLN Net price: 35,690 EUR (based on 4.2 PLN/EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), Catalogue number: 7649 TECHNICAL DATA Infeed width: 900 mm Infeed height: 300 mm Shaft width: 1030 mm Shaft diameter: 700 mm Knife length: 1030 mm Number of knives: 3 pcs Screen dimensions: 70x70 mm Below: 2 toothed feed shafts Lower shaft motor: 7.5 kW Above: 2 toothed feed shafts Upper shaft motor: 7.5 kW Belt conveyor feeder Redler chain conveyor 5600 mm + 10600 mm, 2.2 kW Feeder belt width: 800 mm Main motor: 90 kW Reverse function Overall machine dimensions (L/W/H): 3300x3100x1700 mm Base for chipper dimensions: 3300x2080x1940 mm Feeder / Redler dimensions (L/W/H): 5600x900x1000 mm + 10600x1050x1600 mm Base for feeder belt dimensions: 5100x1300x2520 mm Total weight approx.: 16,000 kg ADVANTAGES – German-made – Redler-type chain conveyor equipped with scrapers – Reverse function – DTR technical documentation – Used chipper, in very good condition Dsdpfsx S Nawex Adpsup Net price: 258,900 PLN Net price: 61,640 EUR (according to exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7293 TECHNICAL DATA - Loading hopper dimensions (top, LxW): 1200x1520mm - Loading hopper dimensions (bottom, LxW): 1000x1520mm - Outlet for shredded wood + auger - Rotor working width: 1500mm - Main motor: 45kW - Pump motor: approx. 1.5kW - Number of knives: 41 pcs - Knife size: 40x40mm - Screen: 15mm x 20mm - Pusher drawer - Electric auto-reverse - Dimensions (LxWxH): 2450x2460x1720mm - Weight: approx. 3000kg Dsdpfx Aox Sq Rwjdpoup ADVANTAGES – German-made – Very good condition – Used shredder Original photos Net price: 155,900 PLN Net price: 37,120 EUR depending on the 4.2 EUR exchange rate (Prices may change with higher fluctuations)

Condition: excellent (used), CATALOG NUMBER 7069 TECHNICAL DATA - Inlet width: 400mm - Inlet height: 150mm - Shaft width: 450mm - Shaft diameter: 550mm - Number of knives: 2 pcs - 3 toothed feed rollers from the top and bottom, 2×2.2kW - Electric auto-reverse - Reverse mode - Belt conveyor - Conveyor length: 5100mm Duedpfsyh Ikvox Adpop - Feed belt width: 400mm - Main motor: 30kW - Chipper dimensions (L/W/H): 2600x1500x1530mm - Overall conveyor dimensions (L/W/H): 5200x560x910mm - Weight approx.: 3000kg – with belt conveyor – electric auto-reverse (adjustable) – reverse mode – used chipper, in very good condition Net price: 68,900 PLN Net price: 16,400 EUR (based on exchange rate 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NO. 6631 TECHNICAL DATA - Loading hopper opening: 285x305mm - Motor: 7.35 kW - Number of knives: 3 pcs + 2 counter knives - Knife size: 300x75mm - Screen (2 types): 10mm, 8mm - Extraction nozzle diameter: 100mm - Dimensions (L/W/H): 1070x900x1980mm - Weight: 613kg ADVANTAGES – Swedish production – Additional screen included – Very good condition – Used chipper Dodpfjx Sq Ntex Adpeup Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, price may change)

Condition: excellent (used), Catalogue number 6825 TECHNICAL SPECIFICATIONS - Hopper dimensions (length/width): 900x630 mm - Rotor working width: 540 mm - Motor: 7.5 kW - Screen diameter: 20 mm - Knife dimensions: 40x40 mm - Number of knives: 15 pcs - Autoreverse - Pressure drawer - Dimensions (L/W/H): 2060x980x1580 mm - Weight: 1008 kg ADVANTAGES – German-made – Unpainted – Very good condition – Used shredder Net price: 37,900 PLN Duedpfx Aoyh H Ugjdpop Net price: 9,020 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (With significant exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2017, operating hours: 2,000 h, functionality: fully functional, control cabinet height: 1,860 mm, total length: 3,371 mm, total height: 2,778 mm, overall weight: 15,000 kg, total width: 2,135 mm, control cabinet length: 1,980 mm, rotor length: 2,020 mm, rotational speed (max.): 300 rpm, number of blades: 216, Equipment: CE marking, documentation/manual, Single-shaft shredder with hydraulic drive and pusher, suitable for processing plastics, paper, PLASMIX, CCS, RDF, wood, and other materials. The machine features a solid and durable frame, a robust knife rotor, and a patented knife holder attachment system. Material to be processed must be pre-cleaned of ferrous, inert, and non-shreddable contaminants. Feeding is automatic thanks to the interaction between the hydraulic pusher and the rotor. Output particle size is determined by the screen grids. Rotor speed, and therefore throughput, can be adjusted via the fully hydraulic transmission system. The integration of the knife holders into the rotor body itself and the particularly robust rotor design make the machine extremely safe and accessible for maintenance. Duodeyli H Nopfx Adpjp

Condition: refurbished (used), Year of construction: 2009, operating hours: 5,900 h, Completely overhauled Long belt Dedpeylddcefx Adpsup

Condition: excellent (used), Mus Max WT 9 Chassis Tatra 2012 Dujdpfxjylda Ro Adpsp Crane Penz 9.8 m

Condition: excellent (used), Gross Gaz 102 shredder/chipper Dujdpfx Aoylav Uodpsp 22 kW motor, rotor length 1020 mm, 50 knives on the rotor, hydraulic drawer, 15 mm screen, autoreverse, loading hopper inlet 1020 x 1500 mm The machine is in very good condition and fully performs its functions.

Year of construction: 2010, condition: good (used), functionality: unexamined, For sale: straw shredding line. The line consists of: - horizontal feeder, - inclined feeder, - chopper with housing, - individual bag filter. Line capacity: approx. 5 t/h Duodpfx Adewttp Sepop Length of horizontal feed table: 7.6 m Drive motor power of horizontal feed table: 1.5 kW Length of inclined feed table: 12.5 m Drive motor power of inclined feed table: 1.5 kW Shredder dimensions: Height: 8.2 m Length: 5.2 m Width: 3.8 m Power: 2 x 132 kW Each shredder is equipped with an individual bag filter. For more photos and details, please contact us. Machines can be viewed in Sępólno Krajeńskie, Kuyavian-Pomeranian Voivodeship, Poland.

Condition: excellent (used), Year of construction: 2007, Wood chipper Junkkari Oy Dsdpfxsxprcme Adpsup

Condition: ready for operation (used), Year of construction: 1982, operating hours: 5,000 h, For sale: Klockner chipper from 1982, in good condition, two-knife system, produces coarse fraction. Infeed opening 550×220 mm, Leyland engine 120 HP, low fuel consumption. Viewing welcome. Duodpsv U Eatjfx Adpep

Year of construction: 2019, condition: used, For sale is a used cable granulation plant. Technical Data: Model: QJF-600 Voltage: 380V Frequency: 52.37 Hz Total Power: 53 kW Dedpjw Sv Rzofx Adpeup Circuit Breaker: 125A Weight: approx. 3200 kg Dimensions: 3.5m x 2.0m x 2.8m Cable Diameter: 0.3–20 mm (dry cables only!) Capacity: 150–200 kg/h (cable/hour) Number of Blades: 10 rotating, 4 stationary Separator: L2.9 x W1.9 x H3.4 m Crusher: L1.97 x W1.4 x H1.95 m Output varies depending on the type of cable processed. This cable granulation plant is suitable for various types of copper cables with diameters up to 20mm. The cable shredder is straightforward to operate and very efficient. Up to 98.7% of the copper can be recovered from the cables. The machine price is €25,000 net, excluding shipping and installation. Transportation can be arranged upon request. Once you provide the postal code, we will calculate the delivery costs. Please note that transport costs must be added to the purchase price. Offer valid while stocks last. Subject to prior sale and errors! Installation and delivery available at additional cost!