Used Styrofoam Milling Machine for sale (91,990)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,750 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 600 mm, table length: 1,200 mm, table width: 1,000 mm, spindle speed (max.): 22,000 rpm, table load: 3,000 kg, Heidenhain TNC 640 CNC TRAVELS Longitudinal travel: 1.750 mm Transverse travel: 1.400 mm Vertical travel: 600 mm Feed speed: 35.000 mm/min Acceleration: 6 m/sec WORK AREA Table dimensions: 1.000 x 1.200 mm Table load capacity: 3.000 kg Distance between table and spindle nose: 205-805 mm Maximum horizontal passage: 1.430 mm Work table height from ground: 855 mm DIMENSIONS Maximum height: 3.850 mm Hjdpfxoxtqq Ro Ab Djw Base module dimensions: 6.000 x 4.000 mm Floor area: 24 m2 ELECTROSPINDLE S1 power: 26 kW – 1500 HP 18.5 Maximum spindle torque S1: 105-12 Nm Maximum spindle rotation speed: 22.000 rpm Tool holder: HSK A63 E40 Machine complete with: • 5-axis direct-drive universal milling head with continuous movement of the two bodies • Tool changer • Instruction manuals and CE declaration

Year of construction: 2011, condition: ready for operation (used), X-axis: 1150mm, y-axis: 710mm, z-axis: 710mm, number of tool positions: 32, rapid traverse/feed rate: 30m/min, working area height: 2578mm, tool holder: SK40, accuracy: 10μm, speed: 18,000/min, drive power 40% ED: 28kW, control: Heidenhain iTNC 530, power connection: 80A, connected load: 48kVA, length: 4228mm (including rear wall and chip conveyor), width: 3458mm, total height: 3256mm, chip conveyor height: 965mm, weight: 10.5t, operating hours: 30,521h, spindle hours: 15,386h. With Zeroclamp 12 pots 138 (zero-point clamping system). An on-site inspection is possible. Hsdpsxtpqvofx Ab Dsw

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 7,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,400 mm, feed length X-axis: 7,000 mm, feed length Y-axis: 1,600 mm, feed length Z-axis: 1,400 mm, Complete with all assemblies required for installation and commissioning x = 7 m y = 1.6 m z = 1.4 m (800 mm + quill = 600 mm) General overhaul in 2007, year of manufacture 1991 Rapid traverse: 12,000 mm/min; w-axis: 6,000 mm/min Fitted with new Siemens Sinumerik 840D control system, new drive motors, refurbished guideways, and new control cabinets. ECOCUT 1 was only operated for a few hours thereafter. Hedew Dhm Hjpfx Ab Djw TDV 2 rotary table, max. workpiece weight 6 t / clamping area 1,000 x 1,000 mm TDV 3 rotary table, max. workpiece weight 12 t / clamping area 1,250 x 1,600 mm Accessories: 2 right-angle milling heads / chain-type automatic tool changer / platen table / full enclosure / Knoll hopper feeding system / extraction unit / coolant system with belt filter. Supplied with all BWF fixtures required for installing the machine bed and clamping plate.

Condition: good (used), Year of construction: 1991, functionality: fully functional, 🏭 Universal Tool Milling Machine Mikron WF 31-D – with Heidenhain TNC 355 Control Manufacturer: Mikron AG, Switzerland Model: WF 31-D Machine Type: Universal Tool Milling Machine Control: Heidenhain TNC 355 Condition: Very well-maintained, fully operational 🔧 Technical Specifications Travel Paths: X-axis: 500 mm Y-axis: 400 mm Z-axis: 400 mm Table Size: approx. 800 × 400 mm Tool Holder: SK40 Speed Range: up to approx. 4,000 rpm Quill: extendable, with fine adjustment Spindle Head: universally swiveling ±90° Weight: approx. 2,000 kg ⚙️ Equipment / Accessories CNC control Heidenhain TNC 355 Universal swiveling head Electronic handwheel Coolant system Work light Documentation available 💡 Particularly Suitable For Single-part and small batch production Tool and mold making Training workshops and technical schools Precision milling and drilling operations Hjdpextnnysfx Ab Dsw 📍 Condition The machine is in very good technical condition, has been regularly maintained, and is immediately ready for operation. Well-maintained, clean, and fully functional.

Condition: ready for operation (used), Year of construction: 1986, overall weight: 4,700 kg, Equipment: documentation/manual, Kesel Rack Milling Machine Type L79/2100 with Milling Head Type F55 Year of manufacture: 1986 Machine no.: 3031 Continuously variable milling head speed: 0–210 rpm, drive power: 18.5 kW Max. module 12, max. cutter diameter: 250 mm Clamping/milling length (X-axis): 2,100 mm, helix angle ±30°, milling feed stroke (Z-axis): 370 mm, infeed (Y-axis): 250 mm, milling head swivel ±30°, max. workpiece width (machining width): 280 mm Milling feed: 10–350 mm/min, rapid traverse: 5,000 mm/min, table feed: max. 3,000 mm/min Cam control, second increased feed speed via cam, hydraulic clamping system with 10 clamping jaws, max. clamping force: 7,500 daN, hydraulic clamping stroke: 7 mm, clamping width: 190 mm Coolant system with permanent magnet chip conveyor Hodpfx Absw Rnz No Djw Heidenhain 2-axis linear measuring system Machine weight approx. 4,700 kg Milling machine – 2,100 mm milling length with F55 milling head Continuously adjustable speed from 0 to 210 rpm Drive power: 18.5 kW Max. feed rate 500 mm/min, specially controlled via cam for rapid indexing cycle with 2 shafts – second feed speed Magnetic chip conveyor with chip bin and coolant system Hydraulic clamping device with special clamping bars for clamping 2 shafts Milling head with 9-speed gearbox for cutter speeds from 44–296 rpm Height-adjustable and swiveling milling head Table guide with steel telescopic cover Automatic hydraulic table clamping Coolant system with chip collection trays Central lubrication system for oil supply to guides, spindles, and counter bearing, automatically adjustable by timer Swiveling control panel Swiveling feed slide for helical milling ±30° left or right Heidenhain TNC151 path control Inspections under power possible by appointment. All technical data subject to errors and omissions. Price on request Sale exclusively to EU countries.

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, controller model: Simens Sinumerik 840 D SL mit Handterminal HT 2, workpiece length (max.): 3,500 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 700 mm, spindle speed (min.): 12,000 rpm, spindle speed (max.): 24,000 rpm, CNC machines from HG GRIMME SysTech - CNC 5-axis milling machine G-S-F/Universal Perfect for: Applications in model and mold making, but also for milling other materials – a universal powerhouse with a rapid traverse of 80 m/min Materials: Plastics, composite materials such as CFRP/GFRP, model making materials, aluminum Industry: Automotive, aviation, transport & logistics, leisure industry, plumbing, boat building, automation Reference number: 1210 Availability from: July 2025 CNC machine type: 5-axis CNC milling machine G-S-F/UNI (35-15) Spindle specifications: 13 kW / 10.3 Nm; 12,000-24,000 rpm; HSK F 63 Rapid traverse X/Y/Z: 80/80/60 Component dimensions X/Y/Z: 3500 x 1500 x 700 Control: SIEMENS – Sinumerik One with HT 2 handheld terminal Tool changer: 10 tools Hodpfx Abswdt Ezj Dsw Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: upon request Year of manufacture: 2025 Condition: new

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, spindle speed (max.): 4,000 rpm, SELCA 4045 CNC TRAVEL Longitudinal travel: 6.000 mm Vertical travel: 2.000 mm Transverse ram travel: 1.200 mm SPINDLE Motor power: 30 kW Spindle head taper: DIN 69871-B ISO50 Speed: 4.000 rpm Hodsxtqqdepfx Ab Dsw FEEDS AND RAPID TRAVELS Maximum working feed range: 5.000 mm/min Rapid travels: 15.000 mm/min Maximum axis thrust on cutting tool: 11.000 N

Condition: excellent (used), x-travel 450 mm y-travel 175 mm z-travel 400 mm spindle turning speed range 60 - 2800 U/min Hjdpfx Ajvwgn Djb Djw weight of the machine ca. 1 t dimensions of the machine ca. 1,1 x 1 x 1,5 m Die Fräsmaschine ist in einem sehr gutem gepflegtem Zustand

Condition: good (used), – ISO40 – 35/1800 rpm – Infinitely variable spindle speed – Table 1100 x 250 mm – Automatic feed on X, Y, and Z axes – Infinitely variable feed rate – Rapid traverse – Heidenhain digital readout on X, Y, and Z axes – 3D milling head – Coolant system – Protective cover – Emergency stop button Hsdpfx Aoxtgfksb Dsw – Tooling package – 380 V

Condition: good (used), Year of construction: 1990, functionality: fully functional, 🏭 Universal Milling Machine Hermle UWF 900 E Manufacturer: Hermle Model: UWF 900 E Year of manufacture: 1990 Factory No.: 1893 Hodpfxjxtnmcs Ab Dew 🔧 Technical Specifications Travel distances: X-Axis (Longitudinal travel): 600 mm Y-Axis (Cross travel): 500 mm Z-Axis (Vertical travel): 450 mm Quill: 100 mm, extendable Spindle head swiveling range: ±90° Milling spindle front bearing diameter: Ø 55 mm Tool holder: SK40 DIN 2080 or SK40 DIN 69871 / BT40 Table size (universal clamping table): 420 x 650 mm, extendable up to 935 mm NC rotary table (4th axis): Ø 380 mm, swivel-mounted ⚙️ Equipment / Accessories: Vertical milling head with quill and fine adjustment Universal facing and angular milling head Heidenhain CNC control 💡 Particularly suitable for: Single-part and small-batch production Tool and mold making Precision and complex milling applications 📍 Condition Well-maintained, fully operational tool milling machine, precision-built in Germany. Immediately ready for use – ideal for workshops, training centers, or manufacturing facilities with high-quality standards.

Condition: excellent (used), Tabletop Edge Bander JAROMA + Edge Trimmer with Cutting Unit Catalog No. 7729A Edge Bander Equipment: - Band plate - Glue tank (granulate) - Tape feeder - Guillotine – preliminary trimming of edging - Pressure rollers: 2 pcs - Min. width of workpieces: 50 mm - Thickness of workpieces: 10–40 mm - Min. internal radius: 50 mm - Edging at an angle with 1 mm thick tape: 0–45° - Edge thickness: 0.3–3 mm Hodpsxa Eh Dofx Ab Dsw - Electric feed - Total power: 2 kW - Compressed air pressure: 6–7 bar - Dimensions (L/W/H): 1700x1300x1550 mm - Weight: 310 kg Edge Trimmer: - Min. width of workpieces: 50 mm - Thickness of workpieces: 16–40 mm - Edge thickness: 0.5–3 mm - Motor power: 1.1 kW - Air requirement: 6 bar - Extraction nozzle: 60 mm - Dimensions (L/W/H): 1900x850x1450 mm - Weight: 290 kg Cutting Unit: - Blade diameter: 150 mm - Table dimensions: 750x820 mm - Motor power: 0.12 kW / 2800 rpm – Polish manufacture – Unpainted – DTR documentation – Very good condition – Used edge bander Net price: 11,000 PLN Net price: 2,620 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary depending on exchange rate fluctuations)

Condition: new, Year of construction: 2025, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 60 m/min, workpiece length (max.): 2,500 mm, workpiece width (max.): 1,300 mm, workpiece height (max.): 800 mm, spindle speed (min.): 36,000 rpm, spindle speed (max.): 12,000 rpm, CNC Machines from HG GRIMME SysTech - CNC 5-Axis Milling Machine G-S-F/Universal Perfect for: Applications in model and mold making, but also for milling other materials – a universal powerhouse with a rapid traverse of 80 m/min Materials: Plastics, composite materials such as CFRP/GFRP, model making materials, aluminum Industries: Automotive, aviation, transport & logistics, leisure industry, plumbing, boat building, automation Reference number: 1208 Availability: July 2025 CNC Machine Type: 5-Axis CNC Milling Machine G-S-F/B (25-13) Spindle specifications: 8 kW / 6.4 Nm; 12,000-36,000 rpm; HSK E 40 Hodpfswdt Ipjx Ab Dew Rapid traverse X/Y/Z: 80/80/60 Component dimensions X/Y/Z: 2500 x 1300 x 600 Control: SIEMENS – Sinumerik 840D sl with HT 8 Tool changer: 13 tools Tables: 1 table Vacuum system: yes Tool breakage and length control: Renishaw-TS 27 R Other: upon request Year of manufacture: 2025 Condition: new

Condition: used, Year of construction: 1992, Butler LE5000 Elgamill 5 Axis CNC Horizontal Boring & Milling Machine, Fanuc 15M Control. YEAR 1992. Available with all the Tee slotted floor plates, angle plates listed below. 112767 2750mm x 1520 mm x 250mm Tee slotted Floor Plate 112768 2750mm x 1520 mm x 250mm Tee slotted Floor Plate 112769 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112770 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112771 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112772 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112773 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112774 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112775 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112776 3050mm x 1520mm x 250mm Tee slotted Floor Plate 112777 6700mm x 1070mm x 880mm Surface Table 112778 600mm x 500mm 1800mm Angle Plate 112779 600mm x 500mm 1800mm Angle Plate 112780 600mm x 500mm 1800mm Angle Plate Hjdpfxsxtf T He Ab Dow 112781 600mm x 500mm 1800mm Angle Plate 112782 910mm x 700mm x 1800mm Angle Plate 112783 840mm x 690mm x 3370mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112784 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112785 1020mm x 1010mm x 4480mm Angle Plate Fitted with cranked riser block allowing movement of top angle plate. 112786 900mm x 600mm x 3000mm Angle Plate 112787 1020mm x 1010mm x 4280mm Angle Plate 112788 1830mm x 1220mm x 600mm box table tee slotted on two faces 112789 800mm x 750mm x 1190mm Angle Plate

Condition: good (used), REF: MM6180 Available as a single lot comprising of 2x Tom Chandley Ltd Ovens and 1x Newsmith Stainless Ltd – Industrial Bread Pan Washer. Technical specification ⚙️ Tom Chandley Ltd – 6 Tray Deck Oven ✅ Model: Compac (likely 3-deck, 2 trays per deck) ✅ Serial No: 3669 ✅ Voltage: 250V ✅ Power: 5.3 kW per phase (x3 phases) ✅ Date Code: Appears to be 3.2.6.79 – possibly June 1979 manufacture 🗒️ Notes: Stainless steel construction, manual dial controls, single stack on stand with castors. Tom Chandley Ltd – CP MK4 4-8-8 Deck Oven ✅ Model Ref: CP MK4 4-8-8 ✅ Serial No: 8293 ✅ Date of Manufacture: January 1998 ✅ Voltage: 400/230V ✅ Phases: 3-phase, 50Hz ✅ Total Load: 61.84 kW ✅ Max Amps/Phase: 90.95A Hodpfjw Rn Eusx Ab Dow ✅ Largest Single Load: 23.73A 🗒️Notes: 4 decks with 8 trays per deck (32 trays total). Stainless steel, individual deck controls, heavy-duty commercial bakery use. Newsmith Stainless Ltd – Industrial Bread Pan Washer ✅ Serial No: KM 765 ✅ Manufacturer: Newsmith Stainless Ltd, Liversedge, West Yorkshire, UK ✅ Stainless steel construction ✅ Front-loading with internal rack system for bread pans or trays ✅ CE marked 🗒️Notes:Requires detergents approved by Newsmith Stainless Ltd to maintain warranty Important: These machines are in the Repuplic of Ireland and subject to European import/export regulations. Responsibility for collecting/shipping these machines will be with the buyer.

Condition: ready for operation (used), Year of construction: 1968, Tilting spindle moulder Holz-Her power feed with three rollers Manual height and tilt adjustment Hedpsxqy Iyefx Ab Dew Technical specifications available on request All information provided without guarantee

Condition: used, Year of construction: 2005, machine/vehicle number: 05100630, This MTE - BF-3200 - CNC bed-type milling machine is being auctioned online in our industrial auction / machinery insolvency auction - SK Hydroautomation GmbH - CNC machines - workshop equipment - material. Hedjxqx T Ispfx Ab Dsw

Condition: excellent (used), CATALOG NUMBER 7730 TECHNICAL DATA Milling Machine: - Minimum width of workpieces: 50mm - Workpiece thickness: 16-40mm - Edge thickness: 0.5-3mm - Motor power: 1.1kW - Air requirement: 6 bar - Extraction nozzle: 60mm - Dimensions (L/W/H): 1900x850x1450mm - Weight: 290kg Hodpfx Abjxa Egms Dow Trimming Unit: - Blade diameter: 150mm - Table size: 750x820mm - Motor power: 0.12kW / 2800rpm ADVANTAGES – Polish-made – Trimming unit – Profiled cutters included – Unpainted – DTR documentation – Used milling machine, in very good condition Net price: 4500 PLN Net price: 1070 EUR depending on a rate of 4.2 EUR (Prices may vary with significant rate fluctuations)

Condition: used, The machines are in good condition. Hsdpfx Aoxtflcjb Dsw

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE Excalibur drilling machine for processing flat steel and profiles with longitudinally moving drilling unit. This machine has been completely cleaned and checked. The drilling machine has a numerically controlled, longitudinally moving drilling unit, X-axis, adjustment 0 - 15,000 mm, automatic tool change system with HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the drilling machine is suitable for use with carbide drilling tools. Technical details: Profiled and flat steel support with guide rail with fixed table Total length 15 m. Mobile drilling unit for longitudinal positioning on workpieces. Horizontal drill head with one drill spindle Additional drill chuck storage in X-axis direction Clamping device for securing material Position detection device Hedpfxjv Iamze Ab Dow Profile size - max.: 1200 x 1200 mm Number of drill spindles: 1 pc. Drill diameter: 5 - 40 mm Thread cutting: M6 - M30 Drill spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 For further information, please contact us

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,400 mm, travel distance Z-axis: 1,000 mm, distance between stands: 2,000 mm, controller model: Siemens 840D SL, TECHNICAL DETAILS Axes: 5 controlled X travel: 4,000 mm Y travel: 3,400 mm Column clearance: 2,000 mm Z travel: 1,000 mm Control: Siemens 840D SL Spindle power: 37 kW Hedextb Sxopfx Ab Dsw Speed range: 12–2,800 rpm Distance spindle to clamping surface: 280–1,280 mm Taper: ISO SK-50 Table size (longitudinal): 3,000 mm Table size (cross): 1,500 mm C-axis swivel range: 0–360° (in 1° increments) Swivel range: 90°–0°–90° (in 1° increments) MACHINE DETAILS Total power requirement: 70 kVA Machine weight: approx. 82 t Footprint: approx. 10,200 mm x 7,200 mm x 5,925 mm EQUIPMENT Automatic tool changer for 60 tools 1 universal milling head, 1,750 Nm

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,100 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, table load: 794 kg, TECHNICAL DETAILS Travel X: 1,270 mm Travel Y: 508 mm Travel Z: 635 mm Rapid traverse speed X/Y/Z: 35.6 m/min Distance spindle nose to table max.: 742 mm Distance spindle nose to table min.: 107 mm Max. spindle speed: 12,000 rpm Spindle drive power: 22.4 kW Table dimensions: 1,321 x 495 mm Max. table load: 794 kg Tool changer positions: 24+1 Max. tool weight: 5.4 kg Tool change time: 1.8 s MACHINE DETAILS Hjdpfx Aextbtiob Dew Dimensions & Weight Dimensions (L x W x H): approx. 3,000 x 2,500 x 2,600 mm Weight: approx. 6,800 kg Cycle start time: approx. 10,100 h Feed time: approx. 7,100 h EQUIPMENT Haas control with synchronous tapping Wireless probing system Coolant system with programmable coolant nozzle Spiral chip conveyor

Condition: new, Year of construction: 2025, Notch milling machine AKF125M Hedpextbp Refx Ab Dow For corner milling of plastic and aluminium profiles With quick-change milling cutter system. Simple handling and perfect results.

Condition: excellent (used), Catalog number 7382 TECHNICAL DATA Tenoning carriage: - Electric feed with stepless speed adjustment - Carriage adjustable at an angle - Feed motor: 0.46 kW - Table size (L/W): 700x450mm, extendable to 1150mm - Cross fence on carriage – cutting length on extendable telescope: 1860mm - Rotary block in the fence - 2 pneumatic clamps Crosscut saw: - Max blade diameter: 380mm - Max cutting height: 110mm - Blade adjustable up/down, forward/backward, and at an angle Hedpfjtx T Dxjx Ab Djw - Blade guard - Saw motor: 2.2 kW Tenoning spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 320mm - Spindle diameter: 40mm - Working spindle height: 220mm - Spindle lock - Motor: 7.5 kW Profiling spindle: - Pneumatic spindle stroke - Spindle up/down and stroke adjustment via handwheels - Max tool diameter: 200mm - Working spindle height: 220mm - Spindle diameter: 54mm - Spindle lock - Extendable table support - Motor: 7.5 kW Glazing bead saw: - Max blade diameter: 200mm - Blade bore: 30mm - Blade adjustable forward/backward, up/down - Blade guard - Motor: 2.2 kW Feed unit: - Number of rollers: 8 pcs - Motor approx. 0.55 kW - Roller size: 110x50mm - 8 feed speeds: 4, 6, 8, 10, 12, 15, 20, 30 m/min - Extraction port diameters: 60mm, 2x130mm, 110mm, 100mm - Operating pressure: 6-8 bar - Dimensions (L/W/H): 3600x2100x1600mm, weight approx. 2500kg FEATURES – For window production – Pneumatic spindle stroke – Carriage with electric feed – Crosscut saw – Tenoning spindle – Not repainted, used machine, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR (based on the exchange rate of 4.2 PLN/EUR) (Prices may change with significant currency fluctuations)

Condition: excellent (used), Fully automated Loghouse milling machine Blockhausfräse BL100ADT for economic production of components used in modern log cabin construction up to maximum dimension 140 x 200mm. Due to the efficient production method with automatic Optimization and multiple lengths (Multilog System) the output from this machine is very high. During each working shift can be produced up to 1200 metres of components for average sized, individual houses. High performance spindle drives and climb milling ensures a clean cut milling contour without being frayed.  Belt conveyer loading system, where the operator puts onto the raw material. Hodpfjxtblfex Ab Dew  Infeed table with Servo pushing system for fully automated workpiece transport and positioning.  Blockhausfräse BL100 with the working units, drill, wind notch, main notch, log dovetail / straight connection groove head, crosscut saw.  Outfeed table with the pneumatic unloading device.  Workpiece deposit support, where the operator takes off the finished Logs.  Operator panel with IPC for software and machine control.

Condition: good (used), Year of construction: 2018, functionality: unexamined, ★★★ NOLL BF-3GVS Milling Machine - Year of Manufacture 2018 ★★★ ● Machine Number: 18001 ● Condition: Unchecked ● Delivery Terms: Free loaded on truck ● Location: Sprockhövel ● Availability: By arrangement ● Payment Terms: Advance payment by bank transfer ● Internal No.: ED48 Technical Specifications: ☑️ Longitudinal table travel: 285 mm ☑️ Cross table travel: 410 mm ☑️ Table dimensions: 730 x 210 mm ☑️ 2-axis digital readout FAGOR Hedpjwyxrxjfx Ab Djw ☑️ Spindle taper: MT 3 ☑️ Quill stroke: 120 mm ☑️ Drilling capacity in steel: 32 mm ☑️ Thread cutting capacity: M16 ☑️ Speed range: 50-1250 / 100-2500 rpm ☑️ Connection: 400 V / 0.75 kW Scope of Delivery: ✔ Operating manual ✔ VERTEX dividing head ✔ Machine lamp Dimensions & Weight: ● Installation dimensions (L x W x H approx.): 1000 x 900 x 2000 mm ● Weight approx.: 500 kg If you have any questions or would like to arrange a viewing, please feel free to contact us. ⚠️Additional notes: ► Transport to destination can be arranged upon request ► The price is net plus VAT ► The goods are sold without any warranty ► Technical data subject to change ► Subject to prior sale ❗Sale of this item is exclusively to business customers❗