Used Streamfeeder Reliant 1500 for sale (6,784)

Condition: used, tank capacity: 1,500 l, GENERAL Features: Evacuation/Aeration, butterfly valve Design: vertical Remarks: Height-adjustable cap screws for the feet are missing; hand lever for the butterfly valve is missing; manway cover is not suitable for an operating pressure of 2 bar (the tank was most likely operated unpressurized by the previous owner and thus the cover was replaced accordingly) Outer diameter: 1,300 mm Inner diameter: 1,150 mm Total height: 2,700 mm Heating/Cooling: present Insulation: present Max. permissible operating temperature: 20 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.0 bar Agitator: agitator flange Support type: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Volume: 1,500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,550 mm Last application: dairy Bsdpfjxqa Itox Acyeww TANK Max. operating temperature tank / °C: 120 °C Bottom: flat bottom with slope Number of feet: 3 units HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FEATURES Manway / dome: on top (Ø 430) Outlet: DN65 DIN 11851 Note: dents on the insulation jacket, functionality of the double jacket not tested MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator arrangement: off-centre on top

Condition: used, Technical details: floor-plate length: 2000 mm plate width: 1500 mm plate height: 820 mm Plate thickness: 185 mm weight of the machine ca.: ca. 2,1 / 2,2 pro Platte t transport dimensions LxWxH: ca. 2,0 x 1,5 / pro Platte m There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x fixing holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for shelf no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for panel no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm * Bwodeu N D Rdspfx Acyew

Condition: used, Roller conveyor, length,1500 mm - Working width 1300 mm - Overall width ~ 1.590 mm - roller conveyor height 890 + - 20 mm - Diameter roller 60 mm - Roller pitch 125 mm - Angetrieben nein ohne Antrieb - Length 1.500 mm - Colour schwarz, black - Voltage / HZ 400 / 50 - Location, in stock Bwodovupd Ajpfx Acyow

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, overall weight: 3,050 kg, KUKA KRC4 linear axis – a high-precision, robust motion unit designed for industrial applications. Provides accurate control of movement sequences and serves as a central component in automation processes and robotic systems within production environments. Durable construction ensures consistent, reliable performance even under the most demanding conditions. Linear Track Model: KL 1500/3T LINEAR UNIT 8 METER Year: 2013 Controller Cabinet: KRC4 Length: 8 meters Condition: USED, well working Bodpfsw I Ez Isx Acyjww Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs. ( Source: Kuka's Website )

Condition: good (used), Year of construction: 2005, functionality: fully functional, Robot Demag W710 axis) (Wittmann) Number of axis: 3 X- 600 mm Y- 800 mm Z- 1500 mm Bjdexp Nu Topfx Acyjww

Condition: used, functionality: fully functional, Type: 3-roll plate rolling machine Maximum rolling length: 1500 mm Estimated rolling thickness (S235) over the entire length: 5 mm Exact value not known as the nameplate is missing Top roll diameter: 125 mm Lower roll diameter: 110 mm Lower rolls: driven Drive: electric Bwedoxrv S Depfx Acysw Side: Foldable side for removal of closed cylinders. Machine dimensions: length 2200 mm x width 850 mm x height 1250 mm Weight approx. 1100 kg Note: The information on this page has been obtained and compiled to the best of our knowledge, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contract and we advise you to check all relevant details. Financial Information VAT/margin: VAT: The displayed price is excluding VAT (VAT deductible for businesses).

Condition: used, tank capacity: 1,500 l, GENERAL Design: vertical Heating/cooling: available Insulation: available Max. allowable operating temperature: 145 °C Max. allowable operating overpressure: 4.0 bar Max. overpressure: 3.5 bar Agitator: beam agitator Base design: feet Location: outdoor storage Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 1,500 liters Product-contact material: V2A 1.4301 (AISI304) Condition: used Last previous use: milk VESSEL Max. operating temperature of vessel / °C: 145 °C Bwsdpfx Acsxqahyjysw EQUIPMENT Manhole/dome: in the top Outlet: available

Condition: used, Year of construction: 2014, Technical details: turning diameter over bed: 660 mm turning dia. over face-slide: 460 mm Bedpou Ix Nrofx Acysww turning length: 1650 mm centre distance: ca. 2200 mm swing over bed: 660 mm swing diameter over slide rest: 460 mm swing diameter: in Kröpfung: 960 mm centre height: 320 mm control: Siemens 828 D ShopTurn x-axis: ca. 350 (plan) mm spindle bore: Ø 105 mm range of revolution per miute: 26-224 / 225-670 / 671-2.000 stufenlos U/min feed continuous: X: 0,5 - 3.000 mm/min feed continuous: Z: 1 - 3.000 rapid traverse x + z axis: 6 m/min tailstock taper MT: MK 6 quill stroke: 300 mm total power requirement: ca. 23 kW dimension machine xH: 4,2 x 2,3 x 2,3 m dimension swarf conveyor LxWxH: 2,3 x 1,7 x 1,3 m Chip conveyor includes cooling water tank with pump 3-speed manual gearbox with electronic gear shifting Tool holder according to/with Silent Tool Technology equipped (Capto C6) Manual control unit Foot switch Control panel Hydraulics automatic door closing (pneumatic) Accessories see comparable in the photo. *

Year of construction: 2012, condition: ready for operation (used), Main Drive Number of axis 3 Additional Equipment Sanding Unit/Sanding Belt: 120 x 2300 mm/Drive Power: 7.5 kW/Belt Tension: Pneumatic/Oscillation Range: 10 - 80 mm for optimum belt utilization and cooling/Removal Rate: Approx. 80 cm³/min Bjdpfx Acoxpyt Tsyeww This 3-axis KUHLMEYER Fasen Fix 4.1-1500 grinding machine was manufactured in 2012. It is designed for precision grinding applications, offering robust performance and reliability. If you are looking to get high-quality grinding capabilities, consider the KUHLMEYER Fasen Fix 4.1-1500 machine we have for sale. Contact us for more information. Application Types Grinding

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: ERV 1500 Edelstahl, Vibrating screening machines made of stainless steel with 0.5 mm perforated screens. Bsdpfx Aexrcrdjcyoww

Condition: good (used), Year of construction: 2008, Robot Specification – for Injection Molding Machines (Sepro Type) Payload Capacity: 1. Max load: 10 kg Working Envelope: 1. X-axis stroke: 1500 mm 2. Y-axis stroke: 650 mm 3. Z-axis stroke: 1200 mm Robot Dimensions (L × W × H): 1. 2490 × 1505 × 2125 mm Weight: 1. Robot: 305 kg 2. Electrical control box: 110 kg 3. Box dimensions: 600 × 400 × 1200 mm Suitable for Injection Molding Machines: Bwodpfx Aceu It Dqeyow 1. Clamping force range: 150 – 350 tons Link to Sepro Reference Catalog:

Condition: used, Technical data: Centre height: 415 mm Centre distance: 1,500 mm Swing diameter over bed: 830 mm Swing diameter over cross slide: 500 mm Bed width: 500 mm Spindle bore: 105 mm Spindle nose: Camlock 11" Speed range: 0 - 1,500 rpm Motor power: 22 / 29 kW Bsdpfexpguwox Acyoww Equipment: - FAGOR 8055 CNC control - Turret with 8 positions (VDI 40) - 8 tool holders (VDI 40) - 3-jaw chuck ø 315 mm - Steady rest - Set of levelling elements - Chip conveyor

Condition: good (used), linear drive, linear gear, lifting gear, spindle drive, linear axis, toothed belt axis -Manufacturer: Festo, linear drive type DGE-25-1500-ZR-LK-RH-KF-GK -Stroke length: 1500 mm -Servo motor: Festo type EMMS-AS-55-M-LS-TM Bsdpfxoud Urrs Acyoww -Planetary gear: Neugart PLE 80 -Quantity: 5 pieces available -Price: per piece -Dimensions: 1880/70/H340 mm -Weight: 12.7 kg/piece

Condition: used, Year of construction: 1995, Technical details: sheet width: 1500 mm plate thickness: 1 mm control: Ducter 1500 total power requirement: 2,0 kW CROSS/TRANSVERSE PART PLANT consisting of: Reel straightening machine and shears Bodpsu Tp N Defx Acyeww Shears: - cutting length 1500 mm - sheet thickness approx. 1.0 mm - operation via control panel and foot control - manual operation / automatic - table size 1530 x 400 mm - Rear end stop: adjustment range 1300 mm - Size: LxWxH: 1600 x 2.0 x 1350 mm Straightening system: - stand width 1585mm - Table size 1700 x 700mm with side stop 1x fixed and 1x adjustable (manual) - 2 pcs. infeed rollers, revolving, Ø 50 x 1670mm - Straightening rolls: 2x opposite draw rolls (2x top/2x bottom) both driven, adjustment path 10mm vertical - continuous rollers: 3x top running, manual adjustment 8mm vertical and 4x bottom driven, fixed - Size: LxWxH: 1580 x 2050 x 1260mm Unwinding reel: - manual operation/handling - Spread max. Ø 520mm - Size: LxWxH: 550 x 800 x 1550mm The machine has a manual counter. accessories: - 1 pc. spare blade (must be regrinded) *

Year of construction: 2007, operating hours: 88,893 h, condition: ready for operation (used), Control Unit Brand HAITIAN Bsdpfx Asxn Uxhocyoww This Arburg A470 C 1500-400 was manufactured in 2007. It features a Haitian handling system installed in 2022, a protective enclosure, and a conveyor belt for parts storage. With 88,893 operating hours, consider the opportunity to buy this Arburg A470 C 1500-400 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: used, Year of construction: 2009, gearing type: other, first registration: 01/2009, color: orange, mileage: 1,001 km, empty load weight: 650 kg, driver cabin: other, Vehicle location: Bovenden, Superstructure: Salt spreader approx. 1.5m³ The salt spreader ran on a Unimog U20! Body spreader with 4x support legs! Dead weight approx. 650kg! Salt spreader approx. 1.5m³ Capacity liquid salt approx. 645l ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bwsdpfx Acjt E R Dbeyjw - .

Condition: excellent (used), Year of construction: 2008, DEMAG System 1500/1500-16000 Injection Moulding Machine with Wittmann W 753 robot (year 2008), equipped with safety enclosure and conveyor belt Year of manufacture: 2008 Clamping Unit Clamping force: 15,000 kN Platen dimensions (H × V): 2,150 × 1,880 mm Tie bar spacing (H × V): 1,500 × 1,250 mm Min./max. mould height: 700 – 1,400 mm Maximum opening stroke: 2,900 mm Injection Unit Screw diameter: 145 mm Injection volume: 10,981 cm³ Shot weight (PS): 9,880 g Injection pressure: 1,454 bar Electrical – Hydraulic Equipment Pump motor rated power: 165 kW Heater power: 97 kW Dimensions and Weight Net weight (including control cabinet): 74 + 21 t Dimensions (L × W × H): 14.4 × 3.4 × 2.9 m Service history / repairs 2010: New screw from RSP and barrel 2015: New Ibed 2015: New wiring plate 2017: New motor and pump 2 2017: New injection cylinder piston rod BS with seals 2017: Circulation pump replacement - oil cooler 2017: Teachbox replacement (Robot) Bedpfxjxq Eb Ej Acysww 2018: P1 + P3 pump replacement (at 65,800 h) 2018: Hydraulic oil change

Condition: excellent (used), Year of construction: 2004, operating hours: 30,665 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 50 mm, clearance between the columns: 470 mm, displacement volume: 392 cm³, injection pressure: 1,670 bar, injection weight: 359 g, mold height (min.): 250 mm, overall weight: 4,900 kg, Equipment: documentation/manual, Here we, as a specialist dealer in injection moulding machines, offer the following well-maintained, used injection moulding machine for sale. Of course, we are also interested in purchasing well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Note – Tax Information and Advantage for Used Machinery From July 1, 2025, used machines can benefit from a special depreciation allowance of 30% per year. In addition to the lower purchase price compared to new machines, you can also apply the same tax depreciations as for new equipment (Key term: Growth Booster, (§ 7 Section 2 EStG-E)). The machine is immediately available in our warehouse in Hannover, Germany and has been tested. Manufacturer: Arburg Type: 470C 1500-350 Serial No.: 196184 Year of Manufacture: 2004 Operating Hours: 30,665 h Dimensions (L/W/H): 4.50 x 1.60 x 2.10 m Weight: 4,900 kg Functionality: Fully operational Condition: Very well maintained Special Features Control: Selogica Screw diameter: 50 mm, highly wear-resistant Shot weight: 359 g Injection pressure: 1,670 bar Shot volume: 392 cc Bodpfxsxn Ayge Acysww Clamping force: 1,500 kN Tie bar spacing: 470 x 470 mm Platen size: 650 x 650 mm Mold height: 250 mm Max. platen distance: 750 mm Ejector stroke/force: 175 mm Clamping unit: Hydraulic Motor power: 18.5 kW Heating power: 9.4 kW Total power: 30.0 kW Extras - 2 additional injection units: 25 mm and 30 mm - 1x core pull - Conveyor belt integrated into the machine bed - Handling interface - Geiger removal device - Selector unit - 2x air blowers - Accumulator for fast injection - Electrical connection for pneumatic shut-off nozzle - Technology level 2, servo-driven control pumps - 9 electrical heating control zones - Interface for temperature control unit (mold) - Interface for color dosing system - Equipment package - Advanced monitoring and motion controls, production management, optimization, operator assistance, quality assurance, and documentation Warranty up to initial commissioning Loading/Shipping Free loading onto buyer’s truck or delivery to site for reimbursement of freight cost from our warehouse in Hannover, Germany Financing On request – hire purchase option Available immediately from our warehouse in Hannover, Germany or delivered to your premises against freight cost reimbursement. The machine is offered fully functional, ownership is solely ours, and it can be viewed under power. About our company and machines: - We only sell machines we own, sourced from running production, available from our Hannover warehouse - All machines are inspected and tested before dismantling - We do NOT sell insolvency goods, nor do we act as brokers trading third-party equipment - All offered machines come from successful companies where maintenance and care are standard - All machines are available for inspection in our warehouse

Year of construction: 2022, condition: as good as new (ex-display), AL-KO grinding table AST 1.5 BASIC The AL-KO grinding table AST 1.5 BASIC is the entry-level model for the AL-KO grinding table program. He is certified according to GS-HO-11 and carries the seal of "Holzstaubgeprueft according to BGI 739-1" THEIR advantages accessible from 4 sides Take loads up to 150kg Manual, tool-free height adjustment with scale Contrasting sides for edge grinding Workpiece-friendly beech wood grid (removable) Funnel-shaped air Guide to the dust extraction spout TECHNICAL DATA LOAD 1.5 BASIC Intake 140 / 160 mm Required suction power 1.500 m ³/h Negative pressure at the connection at 22 m/s 1.000Pa in DN140mm 700Pa at DN160mm Working height adjustable from 735-1.015 mm Bsdpfxsdqzhbo Acysww Working surface (BxL) 946 x 1, 500 mm Dimensions (Wxl) 1, 000 x 1 600mm Weight 73 kg

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Bedpfsu Nzwuox Acyoww Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Year of construction: 2008, condition: ready for operation (used), Single hopper vibropress with full circulation, 2008. The line includes : - Rotho dryer for 2,970 places, - pallets (bretts) 1400x1100, - Sicoma MP2250 / 1500 mixer, - charge for 4 materials for production, Bsdpoiwa H Dsfx Acyeww - silos 120 and 60 tons, - over a dozen forms, mainly produced by Rampf Formen The line has been operating since 2009, only 5 days a week. It is used for the production of ceiling blocks and concrete blocks. The line layout was built under the existing hall so it does not take up much space.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, The DiscMaster SF is equipped with oscillating disc stations from above and below for the simultaneous processing of two workpiece sides in one pass. The disc tools with flexible sanding flaps rotate and oscillate across the workpiece. This means that all internal and external contours are processed uniformly through 360°, regardless of the orientation of the contour. Loewer DiscMaster SF 2/2 - 1500 deburring machine (2020) Manufacturer: Loewer Type: DiscMaster SF 2/2 - 1500 Year of manufacture: 2020 Condition: very good, used max. sanding height : 80 mm Bodpfx Aexnnfbjcysww max. workpiece width : 1500mm Disc motor - rated power : 4 x 2,2 kW disc motor - speed : 1.000 min-1 feed adjustment motor - rated power : 2 x 0.37 kW Height adjustment motor : 0,75kW Oscillation motor : 4 x 0.75 kW Operating voltage : 400 V Frequency : 50 Hz On-site fuse protection : 40 A Extraction connection dimension : 2 x 180 mm Air requirement : 5,500 m3 / h Minimum air speed at the machine connection : 30 m / s Negative pressure at the extraction connection : 2,750 Pa Operating pressure : 6 - 8 bar Length : 1,950 mm Width : 2,150 mm Height : 2,000 mm Weight: 3,400 kg Options: - Transport table infeed - Transport table outfeed - Sensor strip for even tool wear. Detection of the machine's occupancy and display at the infeed of the preferred loading position. Scope of delivery: - Documentation

Condition: excellent (used), Year of construction: 2007, operating hours: 62,680 h, functionality: fully functional, clamping force: 1,500 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, displacement volume: 254 cm³, injection pressure: 1,580 bar, injection weight: 232 g, mold height (min.): 250 mm, opening stroke: 500 mm, heating capacity: 28.7 kW (39.02 HP), Arburg 470C-1500-400 (250) injection molding machine with sorting flap Number: 250 Availability: in stock Year of production: 2007 Producer: Arburg Screw diameter [mm]: 45 Injection weight [g]: 232 Injection pressure [bar]: 1580 Closing force [kN]: 1500 Column spacing [mm]: 470 x 470 Plate size [mm]: 650 x 650 Min. mold height [mm]: 250 Control type: Selogica Language: german Installed power [kW]: 28.7 Working hours [h]: 62680 Weight [kg]: 4900 Dimensions [mm]: 4500 x 1700 Feed hopper: NO Bwsdsxnazhjpfx Acyjw

Condition: used, Year of construction: 2001, max. load capacity: 1,500 kg Bwjdsxnalgopfx Acyjw

Condition: excellent (used), Year of construction: 2020, Holzkraft edge sanding machine type: KSO 1500 with base frame Year of manufacture: 2020, in excellent condition Bjdpfx Acexgvcfjyoww Belt width: 150 mm Belt length: 2270 mm Veneer sanding device: no Oscillation: yes Roller diameter: 38 mm, 50 mm, 76 mm Swiveling sanding unit: yes / 90° - 0° Worktable: 680 mm x 310 mm Additional table: 260 x 260 mm Belt speed: 16 m/sec Extraction connection: 100 mm x 2 Motor power: 1.5 kW / 400V Machine length: 1350 mm Machine width: 585 mm Weight: 162 kg Location: from stock 54634 Bitburg - immediately available -