Used Strand Pelletizer for sale (368)

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. Hsdpoiyynwofx Aahop additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Condition: excellent (used), functionality: fully functional, Starlinger Extruder - Screw diameter: 65 mm - Overhauled - Degassing zones - Filter/screen changer - Die Data sheet, see photos. Optionally available with water bath & strand granulator, etc. Hedpohgq Ahsfx Aahop We are available to answer any further questions at any time. Commissioning and testing can be arranged. Available for immediate delivery.

Condition: ready for operation (used), functionality: fully functional, 🔧 Key Features of Gala Underwater Pelletizing Systems • Die-Face Cutter: Utilizes a die-face cutter where molten polymer strands are cut directly at the die face, ensuring uniform pellet sizes tailored to customer specifications. • Centrifugal Dryer: Equipped with a centrifugal dryer that efficiently removes moisture from the pellets, eliminating the need for extended drying times. Hodpfx Ajwm Nq Eoahsp • Compact Design: The system's design eliminates the requirement for long water tanks, allowing for a more compact footprint and flexible layout in production facilities. • Ease of Operation: Designed for stable and continuous production, the system offers excellent operability, enabling a single operator to manage multiple lines effectively

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: EX30, We have designed our compact extruder model EX30-28d so that it can be used in all extrusion processes. We offer this extruder as co-extruder or laboratory extruder, as well as for the extrusion of welding wire, filament, solid rods, hoses, or for pelletizing with hot die or strand pelletizer. Hjdpfxjby Rfpe Aahop We also realize other machine dimensions, please contact us. Our standard extruder with nitrided screw and barrel covers most polymer raw materials. Optionally, we also offer this extruder with wear-resistant screw and barrel, for example: for PEEK, titanium, ceramics, etc.

Year of construction: 1988, condition: ready for operation (used), A regeneration plant Erema is available. Components: conveyor belt, extrusion unit, screen changer, strand pelletizer, control unit, and intermediate conveying system. An on-site inspection is possible. Hsdpfx Aasw Dfgwshsp

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Hsdpfx Aaeyhd Dbohjp Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Year of construction: 2025, condition: new, Stock No. 2846 Hodpsd Hqa Iefx Aahsp Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric Hsdpsi Dtbijfx Aahjp > further accessories Visit us at our Wuppertal plant. Trail-run with your material-mix possible, darte and details uopn request.

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: 2846, Stock No. 2846 Compounding Extruder Type Alphatec AD-.S 75 with: Segmented screws, co-rotating, intermeshing screw design Hodpji Dtbujfx Aahsp Cylinder water/medium cooled/temperature-controlled Throughput up to 1200 kg/h - material-dependent Drive 250 kW - AC 48 L/D R+W safety gear coupling 3x degassing zones, 1x vacuum pump with condensate separator 2x side feeders type ZS-B Siemens Touch HMI control OPTIONAL: > Melt filter/screen changer > pelletizing systems: ST strand, WRG water ring, or UWG underwater pelletizing > Screw configuration according to your requirements > Material dosing/blending : volumetric or gravimetric > Additional accessories Visit us at our Wuppertal plant. The system is ready for demonstration, test run date with your material after arrangement

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Hjdpfji Dtbqjx Aahop Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.

Year of construction: 1986, condition: ready for operation (used), screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower Hodpfxszht H Ro Aahep • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: used, Year of construction: 2020, functionality: fully functional, pressing force: 120 t, filling opening width: 2,000 mm, filling opening length: 1,000 mm, bale width: 750 mm, bale height: 1,100 mm, total width: 2,835 mm, total height: 4,374 mm, total length: 19,627 mm, overall weight: 43,000 kg, warranty duration: 12 months, power: 75 kW (101.97 HP), Equipment: documentation/manual, For sale is a baling press, model "HP-G 4 120 VG6," manufactured in 2020, featuring a 6-strand vertical PP twine tying system. The pictures show the machine in its assembled condition. It is now located at our facility in Lathen. The press is sold without a conveyor belt. Before delivery, the machine will be completely overhauled and technically refurbished by our qualified personnel. Our goal is to provide you with a reliable and immediately operational machine that meets the requirements of daily operation. The overhaul includes, among other things, the following services: Hodszhudqepfx Aahep • Disassembly and inspection of the relevant machine components • Evaluation of all wear-relevant components • Replacement or refurbishment of worn parts • Inspection and repair of the press ram and associated guide elements • Inspection and, if necessary, replacement of wear plates, slide guides, and bearing points • Inspection of the press channel and restoration of the required tolerances • Overhaul of the hydraulic components, including cylinders, valve technology, and hydraulic hoses • Replacement of seals, wear parts, and connecting elements • Inspection of the electrical components and safety devices • Inspection and readjustment of the tying device • Cleaning, assembly, and commissioning of the overhauled system • Performance of functional and load tests after completion of the work Thanks to the comprehensive overhaul, you will receive a technically inspected machine with high operational reliability and a long service life. We will be happy to provide you with further information, photos, or a customized offer. If you are interested, we look forward to hearing from you.

Condition: new, Year of construction: 2026, CORMAK DI08 Dry Ice Blasting Machine The CORMAK DI08 is an ultra-portable, light-duty dry ice blasting machine designed for automotive detailers, vehicle service centers, and professional industrial workshops. Thanks to its lightweight construction and compact design, the machine is easy to transport, position in confined spaces, and use on a wide variety of surfaces without the risk of damage. The unit operates with 2.5–3.0 mm dry ice pellets, providing precise and safe cleaning of delicate and technical components. An adjustable dry ice feed rate and controllable blasting pressure allow the cleaning process to be tailored to the type of contamination and the specific surface being treated. KEY FEATURES Ultra-portable design – weighs only 9 kg with compact dimensions of 310 × 190 × 320 mm Compact and easy to use – ideal for workshops, service centers, and field applications Hsdszht Easpfx Aahsp Adjustable dry ice feed rate: 0–0.13 kg/min Versatile applications – suitable for cleaning machinery, tools, electronics, industrial equipment, and automotive components Safe and environmentally friendly cleaning method – no chemicals, no water, and no risk of scratching surfaces APPLICATIONS The CORMAK DI08 is ideal for: Automotive and motorcycle detailing Maintenance of industrial machinery and equipment Cleaning molds, tools, and precision components Cleaning electronic circuit boards Preventive maintenance and industrial equipment servicing PACKAGE CONTENTS You receive a brand-new CORMAK DI08 Dry Ice Blasting Machine, ready for operation with dry ice pellets, supplied with: CORMAK DI08 dry ice blasting machine 3 kg dry ice pellet hopper A selection of nozzles in various shapes and sizes for precise adjustment of the blasting stream The different nozzle shapes and sizes allow the blasting pattern to be matched to the workpiece and application, increasing the machine's versatility for everyday use. TECHNICAL SPECIFICATIONS Power: 42 W Power Supply: 230 V AC, 50 Hz Compressed Air Consumption: 0–2.0 m³/min Dry Ice Feed Rate: 0–0.13 kg/min (adjustable) Hopper Capacity: 3 kg Weight: 9 kg Dry Ice Type: 2.5–3.0 mm pellets Dimensions (L × W × H): 310 × 190 × 320 mm

Condition: new, Year of construction: 2026, CORMAK DI077 Dry Ice Blasting Machine The CORMAK DI077 is a compact and modern dry ice blasting machine designed for the efficient removal of contaminants from machinery, molds, tools, production equipment, and technical surfaces. It is the ideal solution for businesses looking for an effective, clean, and safe cleaning method without the use of chemicals, water, or abrasive materials. The greatest advantage of the DI077 is its compact design and exceptional mobility, which clearly distinguish it from many larger and less portable machines available on the market. As a result, it is perfectly suited not only for production facilities but also for maintenance departments, field service operations, on-site work, and any application where easy transportation and quick setup are essential. The machine operates with 2.5–3.0 mm dry ice pellets and allows precise adjustment of operating parameters to match the type of surface and level of contamination. Adjustable blasting pressure and dry ice feed rate ensure effective cleaning of both delicate components and demanding industrial surfaces. KEY FEATURES Compact design for easy transportation and operation in various locations High mobility and user-friendly operation Effective cleaning without chemicals or water Non-abrasive process that does not damage cleaned surfaces Adjustable blasting pressure Adjustable dry ice feed rate Quick setup and ready-to-use operation Ideal for industrial, maintenance, and technical applications APPLICATIONS The CORMAK DI077 is ideal for: Cleaning industrial machinery and production equipment Removing contamination from molds, tools, and machine components Cleaning metal parts and technical components Maintenance and service operations Cleaning equipment without the need for extensive disassembly Removing grease, carbon deposits, process residues, production contaminants, and other industrial buildup PACKAGE CONTENTS You receive a brand-new CORMAK DI077 Dry Ice Blasting Machine, ready for operation with dry ice pellets, supplied with: CORMAK DI077 dry ice blasting machine A set of nozzles in various shapes and sizes Hodpfx Aaszhtzzjhsp Accessories required for operation according to the supplied configuration The variety of nozzle shapes and sizes allows the blasting stream to be adapted to different workpieces and cleaning conditions, increasing the machine's versatility for everyday use. TECHNICAL SPECIFICATIONS Power: < 500 W Power Supply: 230 V AC, 50 Hz Compressed Air Consumption: 0.8–3.0 m³/min Compressed Air Pressure: 0.1–0.9 MPa (1–9 bar, adjustable) Dry Ice Feed Rate: 0–0.75 kg/min (adjustable) Hopper Capacity: 10 kg Weight: 55 kg Dry Ice Type: 2.5–3.0 mm pellets Drive System: Direct drive Machine Dimensions (L × W × H): 520 × 460 × 960 mm

Condition: excellent (used), Suitable for filling a massive variety of products, for example; fertilizer pellets, toner powder, cat litter, granulated or powdered pet food, whole and ground coffee, sugar, plant food, powdered foods, plastic granules, ground spices, flaked spices, fine cut tobacco, whole and ground pepper, detergent powder, flour, infant formula, cake mix, matcha powder, cosmetic powder, curry powder, seeds, salt products, rice products, lentils, breadcrumbs etc. Hsdpfx Aaew H Adrjhsp

Condition: used, Year of construction: 2009, operating hours: 30,374 h, functionality: fully functional, machine/vehicle number: 000-0059085/3, overall weight: 997 kg, volume flow: 209 m³/h, power: 113.9 kW (154.86 HP), heating capacity: 99 kW (134.60 HP), smoke pipe connection diameter: 200 mm, nominal heat output: 113.9 kW (154.86 HP), space requirement length: 3,140 mm, space requirement height: 2,400 mm, space requirement width: 2,170 mm, temperature: 90 °C, total height: 2,310 mm, total length: 2,040 mm, total width: 860 mm, type of input current: three-phase, exhaust gas temperature (max.): 160 °C, input voltage: 400 V, negative pressure: 15 Pa, nominal power: 99 kW (134.60 HP), tank capacity: 10 l, input current: 13 A, operating pressure: 3 bar, Equipment: documentation/manual, hot water, KWB UNIT USV100 Biomass boiler / wood pellet and wood chip boiler, 99 kW, year of manufacture 2009 For sale is a used KWB UNIT USV100 biomass boiler with a nominal thermal output of 99 kW. Dismantling will take place on July 1, 2026, in Austria, 2100 Leobendorf. Dismantling will be carried out professionally by us. Important note: If the buyer takes over and collects the boiler directly after dismantling in Leobendorf on the day of dismantling, we can offer a price reduction, as in this case, transport to Hungary will not be necessary. The KWB Multifire / UNIT series is a robust biomass heating system for wood pellets and wood chips. The system is ideally suited for larger residential buildings, agricultural buildings, commercial properties, public buildings or smaller district heating networks. According to the nameplate, this boiler is designed for wood pellets with a diameter of 6 mm. The KWB Multifire series is basically designed as a wood pellet and wood chip heating system; operation depends on the existing extraction or conveying system. Main features / equipment: * Robust biomass boiler from KWB, an Austrian quality manufacturer * Suitable for pellets / wood chips depending on the extraction and conveying system * KWB Comfort 3 control, automatic and easy operation * Automatic power adjustment according to heat demand * Automatic heat exchanger cleaning with patented special turbulence generators * KWB MultiFlex burner plate cleaning for different fuel qualities * Underfeed gasifier combustion system with high-temperature combustion zone * Optimal combustion through broadband lambda probe and negative pressure control * Automatic ash extraction with ash compaction * Ash container with level monitoring * Gas-tight and backfire-proof fire protection damper * Reliable conveying technology for individual extraction systems * Robust stoker screw with stainless steel spirals and hard metal coating * Low-maintenance, double-sealed heavy-duty gearbox * Suitable for larger heating systems and commercial applications Technical data: * Manufacturer: KWB * Type: UNIT USV100 / USV D * Year of manufacture: 2009 * Operating hours: 30,374 h * Nominal thermal output: 99 kW * Minimum thermal output: 27.6 kW * Fuel heat output at nominal thermal output: 113.9 kW * Fuel according to nameplate: Wood pellets 6 mm * Biomass system: Pellets / wood chips * Max. operating pressure: 3.5 bar * Max. operating temperature: 90 °C * Water content: 167 liters * Smoke pipe connection: 200 mm * Electrical connection: 3N 400 VAC / 50 Hz / 13 A * Max. electrical power consumption: 2328 W * Weight: approx. 997 kg * Serial number: 000-0059085/3 Hedpfozhh Iiox Aahsp The boiler is sold used, as shown in the pictures. Inspection is possible by appointment. Sale without guarantee and without return. Loading and transport can be arranged by agreement. Current location until dismantling: 2100 Leobendorf, Austria After dismantling: Mosonmagyaróvár, Hungary

Condition: excellent (used), Complete material drying and feeding system by Motan — ready to connect to injection or blow molding machines. The system includes three integrated components: 1. Material vacuum loader (Motan METRO series) Automatic pellet conveying from bag/bulk bag to hopper Electric motor with vacuum turbine Dust filter and discharge valve 2. Stainless steel drying hopper Conical, insulated stainless steel construction Internal heating element and temperature sensor Estimated capacity: [80 / 120 / 200] liters — to be confirmed Hodpfxezhcrvo Aahep 3. Motan LUXOR desiccant dehumidifier (orange cabinet) Twin-tower molecular sieve dehumidification Automatic regeneration cycle Process air temperature: up to 180°C (depending on material) Dew point: −40°C (typical for Motan LUXOR series) Integrated PLC control 380V three-phase Suitable for PMMA, SAN, PC, ABS, PET, PA (nylon), PE, PP, PS and all hygroscopic engineering plastics. Essential for cosmetic, optical, and technical injection molding. Application Pre-drying and feeding of plastic granules to injection molding machines, blow molding machines, and extruders. The system removes moisture from pellets to prevent surface defects (bubbles, streaks, hydrolysis) in finished parts. Technical specifications Brand: Motan (Motan-Colortronic) Model: LUXOR [80 / 120 / 200] — to confirm with rating plate Year: [approx. late 1990s / early 2000s] Voltage: 380V three-phase Origin: Germany Configuration: Complete dryer + hopper + loader

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Hsdpszhbf Isfx Aahep Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Condition: new, Year of construction: 2024, functionality: fully functional, Wood thermal modification kiln fully equipped for thermo wood production, included: 15 m high AISI 316L isolated double wall chimney, inlet/outlet piping, pressure valves, gages, air compressor, full wood pellet heating unit, Siemens control panel, timber loading/unloading platform, 2 sets of timber spacers. Timber volume 7...8 m3, depends on bord dimensions and length; Inner chamber for timber length up to 7,5 m, total kiln length 10 m; Hjdpfx Asvzub Hsahop Full thermal modification cycle time ~24 h from heating up to cooling down; Temperature can be set up to 230°C or more if needed; Required nominal grid power 25 A, can be used without grid with power generator; To produce 1 m3 thermally modified timber: 9...10 kWh + 55...60 kg wood pellets = 16...20 EUR without labor costs; Our wood thermo modification kilns can be made according to customers needed length from 3,6 to 9 m (from 3 to 9 m3 timber volume);

Condition: excellent (used), functionality: fully functional, Robust Möhringer slat conveyor system. Length 11.20 m. Slat length 2.0 m. Overall height 1.0 m. Equipped with integrated lifting and lowering transverse conveyors with 5 chain strands, hydraulically operated. Hjdpfx Aozg Drnjahjp Discharge to the left and right. 4 hydraulically lifting and lowering model support rollers. Split drive with 2 geared motors.

Condition: used, Year of construction: 1990, Mawera Biomass Boiler Cascade System – 1,100 kW + 2,000 kW For sale is a large industrial Mawera biomass boiler cascade system, consisting of two boilers: 1 × 1,100 kW Mawera biomass boiler 1 × 2,000 kW Mawera biomass boiler The two boilers operated side by side in cascade mode and have a combined heating capacity of 3,100 kW. According to the nameplates: 1,100 kW boiler * Manufacturer: Mawera Holzfeuerungsanlagen GmbH & CoKG * Type: FU 1100 RA * Year of manufacture: 1990 * Nominal heat output: 1,100 kW * Operating pressure: 4 bar * Permitted flow temperature: 95 °C 2,000 kW boiler * Manufacturer: Mawera Holzfeuerungsanlagen GmbH & CoKG * Type: FU 2000 RA * Year of manufacture: 1990 * Nominal heat output: 2,000 kW * Water content: 7,800 litres * Operating pressure: 4 bar * Permitted flow temperature: 95 °C The boilers are suitable for wood chips, sawdust, wood residues and other biomass fuels. This is not a classic log wood boiler, but an industrial biomass / wood residue combustion system. Hedozg A R Nspfx Aahep Main technical features according to Mawera documentation: * robust industrial boiler construction * underfeed high-temperature combustion * 3-pass smoke tube boiler * separate fireclay-lined combustion chamber * fuel feeding via underfeed system * suitable for warm water and hot water systems * flue gas and fly ash separation possible with multicyclone systems * suitable for industrial plants, wood processing companies, heating plants, commercial buildings and larger public or private facilities The boilers are currently located in Austria. There is only a very short time available for dismantling. The boilers must be dismantled no later than mid-July. For this reason, we can offer the complete system at a very attractive package price. Dismantling is relatively straightforward, as the boilers can be lifted out through the roof with a crane. Further photos, technical information and details are available on request. We have been working in the heating technology sector for almost 20 years and have an approx. 1,500 m² warehouse with many other boilers, biomass systems, pellet boilers, wood chip systems, heat exchangers, pumps and accessories. Contact: Márton Pauker Top Heating Systems BEN & JAK KFT 📞 🌐

Condition: used, Electric chain hoist crane DEMAG, type DKM 1-80 K V2 F4 Manulift Manufacturer's serial number: 63158144, Year of manufacture: 2000 Load capacity: 80 kg Hook travel: 3 meters Lifting speed: 14 m/min. Fine lifting speed: 3.5 m/min. Motor power: 0.34 / 0.09 kW Hedpfxszd Hi Dj Aahsp Power supply: 400 volts, 50 Hz 1 load strand = 80 kg Manulift hand control directly on the crane hook Weight: 18 kg Good condition

Condition: good (used), functionality: fully functional, power: 398 kW (541.13 HP), gearing type: automatic, color: green, machine/vehicle number: 100114331.Y, PRICE IS FOR 2 UNITS - CAN BE SOLD SEPARATELY! Froling Biomass Boiler with CORDIVARI Buffer Tank - Complete Commercial Heating Systems Offered for sale is a high-capacity biomass heating system comprising a Froling TX 200 biomass boiler and CORDIVARI thermal buffer tank (puffer). This is a commercial-grade installation, designed for high-demand environments such as agricultural operations, industrial units, estates, and large-scale residential projects. The system has been installed and powered on for testing. Boiler Specification (Froling TX 200): • Boiler class: EN 303-5 Class 5 (high-efficiency, low-emissions standard) • Nominal heat output: 199 kW • Heat output range: 59 – 199 kW • Nominal fuel input rate: 214 kW • Permitted fuels (EN 14961): Hsdpfxsyw I Hmj Aahop Wood pellets (Part 2: D06, Class A1) Wood chips (Part 4: P16A – P45A, Class A2) • Max. operating temperature: 90°C • Max. operating pressure: 3 bar • Water content (boiler): 570 litres • Electrical connection: 400V / 50Hz / C35A • Power consumption: 285 – 650 W • Production number: 100114331.Y The Froling TX 200 is a premium biomass boiler known for high efficiency, automated operation, and reliability in continuous-use environments. Paired with a CORDIVARI thermal buffer tank, the system delivers improved heat management, reduced cycling, and optimal energy utilisation. The system is also equipped with an automatic biomass feeding system from upper storage containers, ensuring consistent fuel delivery and minimal manual input. Important: The biomass system has not been used in full operation - it has only been tested. Operating time can be verified via the built-in digital counters, which display the total minutes the system has run. This combination provides a stable and efficient renewable heating solution, ideal for buyers looking to reduce long-term energy costs while meeting environmental targets.

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets New price currently around €250,000 Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Advantages: Additional information about the bagging machine. System Dimensions: The entire system measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The round turntable (disc) has a diameter of 1.5 meters. The system does not need to be installed in a completely straight alignment. The system can be rotated 90 degrees in two sections, creating a U-shape. This allows the machine to be installed in more compact spaces without compromising functionality. The height of the system is fixed. Machine Output: Output capacity is approximately 500 kg per hour. Bag Dimensions and Weight: The bag sizes can be fully customized to your requirements. Options range from small bags of approximately 5 grams to larger bags of 20 kg or even 40 kg. Adjustments can be made flexibly to suit your production demands. Buffer Tank: The buffer tank has a capacity of 20 kg. Maintenance Costs: Average annual maintenance costs, excluding materials and call-out charges, are between €1,200 and €1,500 per year. Worldwide Shipping. Cold Jet Prime 600, Cold Jet Prime600, Cold Jet dry ice dosing & bagging system, dry ice dosing machine for sale, dry ice bagging machine for sale, dry ice production machine, dry ice production machine for sale, dry ice dosing & packaging system, automatic dry ice dosing machine, automatic dry ice bagging system, dry ice pellet production & packaging, dry ice packaging equipment, industrial dry ice production system, dry ice pellet production machine, dry ice pellet making equipment, dry ice pellet packing machine, pelletizer & bagging system, dry ice pelletizer bagger, cryogenic dry ice production equipment, CO2 dry ice production machine, dry ice manufacturing system, dry ice production & dosing system, used dry ice dosing machine, second-hand dry ice production machine, refurbished dry ice machine, dry ice supply system, high-capacity dry ice production system, automatic CO2 pellet bagger, liquid CO2 to dry ice converter, dry ice bag filling machine, dry ice packaging automation system, industrial packaging machine for dry ice, high output dry ice system, adjustable bag size dry ice, dry ice buffer tank system, 500 kg/h dry ice production, worldwide export dry ice machinery, industrial dry ice packaging, cold chain dry ice packaging equipment, food-grade dry ice packaging machine, logistics dry ice dosing & bagging, dry ice dosing & shipping solution, dry ice dosing system Netherlands, dry ice dosing system Noordwijkerhout, DrDryice, dry ice production equipment Europe, cryogenic pellet production systems, dry ice manufacturing equipment for sale, dry ice production line, dry ice pelletizer PR series, integrated dry ice dosing systems, industrial CO2 pellet production, dry ice automation system, dry ice bagging & dosing automation, high reliability dry ice machine. DrDryice Hsdpfxjw Ttxfj Aahep

Condition: like new (used), Year of construction: 2009, operating hours: 467 h, functionality: fully functional, Plow and play. Very low usage, fully equipped mobile dry ice production plant: Total operating time for the pelletizer is 467 hours. The last full service was performed in 2026. • Mobile, containerized manufacturing system • "Production HUB with Triventek PE80 pelletizer, 80 kg/h" (Denmark), built into a portable container with lighting. • ISO CO2 tank, 8m3, portable on a frame, manufacturer Wessington Cryogenics Ltd, England. • 3 pieces of thermo containers, 200 kg capacity each. New price: €250,000 • All manufactured in 2009, but very little used. Mobile & Modular: Built directly into a 10-foot High Cube ISO shipping container, it can be easily transported to rugged or remote locations. Worldwide shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice. Hedpfx Aoy R I Tmsahsp