Used Straight Line Edging Machine for sale (69,271)

Condition: used, Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.15 kW 11160 rpm at 200 Hz -Voltage: 133 volts -Take shaft: Ø 15 mm -Tool: mm -Dimensions: 190/70/H85 mm Bedeb A Tcaepfx Aafelc -Weight: 1.8 kg

Year of construction: 1994, condition: good (used), Double-end tenoner, edge processing machine, flush cutter, edge cutter, spindle motor, milling motor Bljdpfeu Scpqox Aafec -Manufacturer: Paul OTT, milling unit from edge banding machine U 206 -Milling motors: Stephan type ZBXD90L20-2 gearbox BMB 46 -Power: 2.2 kW -Speed: 12155 rpm -Cutter width: 30 mm -Adjustment range: 0 - 70 mm -Dimensions: 460/370/H570 mm -Weight: 89 kg

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz -Gear ratio: 1:2.5 -Voltage: 220/380 volts -Receiving shaft: Ø 30 mm -Tool: Ø 153 x 117 mm -Dimensions: 630/400/H200 mm -Weight: 56 kg Bedob A Hn Sjpfx Aafelc

Condition: good (used), Double end profiler, edge processing machine, scoring motor, chipper motor, electric motor, spindle motor, milling motor -Power: 3.7 kW 5820 rpm at 100 Hz -Power: 3.7 kW 17350 rpm at 300 Hz -Voltage: 220/220 volts Bedpfx Aaecfihfjfjlc -Shaft holder: Ø 24 mm -Dimensions: 355/125/H210 mm -Weight: 20 kg

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Blodpfx Aox Rv Dyeafjc Single-side edge sanding machine Manual conversion from solid wood to veneer sanding Patented device with foldable stops With sanding belt oscillation Manual tilting of the sanding unit 0-45° by scale Motor: 2.2 kW Oscillation stroke: 5 mm Work table: 400 x 1100 mm Sanding belt width: 150 mm Extraction connection: 100 mm Footprint: 600 x 1080 mm Weight: approx. 400 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, We are offering this very well-maintained Roque packaging line, year of manufacture 2020. Blodpfox Uqn Iex Aafjc This line consists of the following components: - ROQFOLD 1.3 - RFD-1101 (year 2020): Generation 1.3 folding and packaging unit by ROQ - ROQPACK 27X45 - RPK-1062 (year 2020): packaging machine by ROQ - ROQLABEL P&A - RTQ-1038 (year 2020): label printer - ROQBAG 22X40 - RBG-1044 (year 2020): packaging machine for pre-made film bags by ROQ - 2 x outfeed conveyor belts - Labelling software and dongles - Complete operating manuals in German and English If you have any questions or require further information, please send us a message or give us a call.

Condition: new, Year of construction: 2026, functionality: fully functional, Edge banding machine – NB860EC - Machine with 6 edge band magazines and servo feed • Robust machine structure and most of the machine's mechanical parts are machined with advanced CNC machines for greater stability and longer life without deformation; • Combines multiple functions in one machine, including pre-milling, pre-heating, pre-melting, end trimming, servo fine cutting, servo scraping, surface scraping and polishing, spraying, all in one process. • Intelligent PC control, feed guide, belt pressing rollers, fine cutting and scraping are controlled by a servo motor. Corner rounding is adjusted pneumatically. Machine speed 16/20/24 m/min; • Nesting kit design • Fine refilling and corner rounding via HSK25 TECHNICAL DATA Panel length: ≥120 mm; ≥200 mm with rounded corners Panel width: ≥60 mm Min. Panel size: 120× 120mm; 120× 60mm long edge; 200*80 mm short edge Panel thickness: 9-60 mm Thickness C=edge: 0.4-3 mm Feed speed: 16/20/24 m/min Power supply: 380 V; 50 Hz Required air pressure: 0.7 MPa Distance between panels ≥50 Console 2 Dust collection outlet Φ 125 mm*5 Total power: 28 Kw Approximate weight: 3,000 kg Overall dimensions: 5,930*1,050*1,850 mm 6-sided drilling CNC and double workstation ND712DTL The ND712D is designed to have 2 independent workstations of 1200+650 mm, integrating 2 machines into one, thus doubling efficiency with less space required. The integrated, high-rigidity machine body structure gives the entire machine a longer service life and fast, stable machining. The optimized drill layout makes drilling more efficient. TECHNICAL DATA Total power: 52.36 kW Machine size: 7400 * 4,620 * 2,650 mm Power supply: 380V/50Hz 3 phases Air supply: 0.6-0.7MPa Total weight: 7,850 kg Control system: SYNTEC Panel size: Length: 250-2,800 mm / Width: 250-650/1200 mm / Thickness 10-60 mm Maximum travel speed: ( X) Axis /U ) - 135 m/min Y axis - 75 m/min Z axis - 30 m/min Transmission mode X axis - Rack and pinion Y axis - Rack and pinion Z axis - Ball screw Drilling blocks: Top 2+2; Bottom 1+1 Vertical drills (top): 19*4 Horizontal drills (top): X: 3 × 8 + Y: 2 × 8 Vertical drills (bottom): 9 × 2 Maximum drilling diameter: Φ35mm Distance between holes: 32 mm Rotation speed: 5000 rpm Shank diameter: Φ10mm Main shaft: 4* ER25 Power: 2*3.5kw; 2*5.5kw max. 18000rpm Blsdpex Uplxjfx Aafsc

Condition: new, Year of construction: 2026, Machine includes: Pre-milling, pre-heating, pre-melting, pressing, fine trimming, end cutting, corner rounding, cutter scraping, flat scraping, buffing Heavy duty machine body and most mechanical machine parts are proceeded by advanced CNC machines for higher stability and longer service life without deforming; Blsdpfxexd Ubbo Aafjc Merges numerous functions in one machine, including pre-milling, pre-heating, pre-melt gluing system, snipping, end trimming, fine trimming with servo, corner trimming, scraping with servo, surface scraping and buffing, sprayers, edge banding work can be done in one process. Intelligent PC control, infeed fence, tape pressing rollers, fine trimming and scraping are servo adjust. Corner rounding pneumatic adjust. Machine Speed 16/20/24m/min; Nesting kit design, pre-drilled nesting hole friendly Fine trimming and Corner rounding by HSK25

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, workpiece weight (max.): 50 kg, workpiece height (max.): 40 mm, edge thickness (max.): 3 mm, workpiece length (max.): 2,500 mm, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Workpiece thickness: 12 - 40 mm Minimum workpiece size (L x W): 250 x 240 mm Maximum workpiece size (L x W): 2,500 x 1,200 mm Maximum workpiece weight: 50 kg Edging material (roll stock) - Material thickness: 0.4 - 3 mm Maximum edge cross-sectional area (plastic): 135 mm Maximum edge cross-sectional area (veneer): 100 mm Maximum roll diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edging up to 0.6 mm Longitudinal processing speed: up to 30 m/min for thick edging up to 3 mm Cross processing speed: up to 30 m/min for panel sizing Cross processing speed: up to 20 m/min for edge processing Minimum distance between workpieces: 500 mm MACHINE DETAILS Connected load: 6.6 kW (double planer longitudinal/cross) Standard milling unit: 6.6 kW EQUIPMENT Top/bottom separating agent spray unit Glue application unit A3 with 2 rollers Profile milling unit FF12 top/bottom with motors 12,000 rpm Finishing unit FA11 top/bottom Steplessly adjustable positioning cams with a maximum cam stroke of 25 mm Pre-milling unit: 0.55 kW PUR OTT 2-kg melting station Bjdpfxox Ezz He Aafslc

Condition: excellent (used), Year of construction: 2010, operating hours: 2,560 h, functionality: fully functional, total length: 5,760 mm, workpiece height (max.): 60 mm, edge thickness (max.): 12 mm, height adjustment type: electric, plate height: 60 mm, Brandt 1650 Highflex with Return Conveyor and PU Glue Box, Excellent Condition Year of manufacture: 2010 Operating hours: 2,587 h Total edge length processed: 216,000 m Maximum edging thickness: 12 mm Maximum panel thickness: 60 mm Maximum thickness of roll material: 3 mm Minimum workpiece width: 70 mm Maximum feed speed: 18 m/min Feed speed: infinitely variable Height adjustment: motorized Glue system: granulate Pre-melter BRANDT glue system QUICKMELT KD 2 x PU glue pots Strip magazine Jointing milling unit End trimming unit with 2 motors Flush/radius/bevel stations: 1 Corner rounding unit with 2 motors Scraper unit Profile scraper, flat scraper Buffing unit Aggregates sequenced NC axis/axes Version: right-handed machine Machine length: 5,760 mm Conformity mark: CE Return conveyor: Ligmatech Boomerang PU glue box Still in operation, inspection recommended, available by arrangement No warranty Pick-up only, forklift available Net price edgebander: €26,000 plus VAT Net price panel return conveyor: €7,000 plus VAT Bledpfxsvnwf Uo Aafjc Machines can also be purchased separately Price negotiable

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, cutting motor, electric motor, spindle motor, milling motor -Unfortunately, no type plate, therefore data approx. -Power: 3.7 kW 2885 rpm at 50 Hz -Power: 5.2 kW 5870 rpm at 100 Hz Bodpfx Aasb A Hhtefslc -Voltage: 380 volts -Receiving shaft: Ø 40 mm -Tool: Ø 200 x 20 mm -Dimensions: 520/250/H160 mm -Weight: 42 kg

Condition: used, Technical details: Bodpju Ngfdefx Aafolc voltage: 380 V total power requirement: 4,0 kW machine weight approx.: 1270 kg dimensions L x W x H: 1,4 x 1,0 x 1,9 m EDGE CHAMFERING MILLING MACHINE Application: Beveling of circular blanks and flat material -smallest straight edge = 3mm -max. breaking strength of the material = 70 kp/mm (690 N/mm²) -max. feed rate: at 10mm bevel width = 3,1 m/min. at 15mm bevel width = 2,9 m/min. at 20mm bevel width = 2,7 m/min. at 25mm bevel width = 1,5 m/min. with degree adjustment (bevel angle) 25° - 55°. scale for setting the straight edge downholder manual with handwheel cutting wheel size Ø 200mm; teeth fine / medium / rough Support block size: D:220 x W:620 x H:350mm; driving wheel approx. Ø 350 x 100mm; display via linear scale *

Year of construction: 2001, condition: used, Technical details: Numbers of turbines: 1 Stck. drum length: 580 mm operating hours: 30.810 h compressed air: 5 - 7 bar filling volume: 100 dm³ total power requirement: 24,2 kW total wight: ca. 5,8 t DRUM - Shotblasting Plant in a closed drum Manual and automatic operation technical specifications: -spinning wheel Ø = 380mm -drum Ø = 1150 mm x length 580 mm -max. filling weight = 220 kg, filling volume 100dm³ -piece size (max. edge length) = 100mm -Turbines 380mm; 15.0 kW -blast media discharge speed approx. 80.0 m/s -Ablast media throughput/turbine approx. 240.0 kg/min. -Steel abrasive grade, nothing else possible! (recommended is: StD-Z 0,6 DIN 8201 HV 700) -Compressed air with cartridge filter system approx. 12 m³/h Blodpeu Nu Nkjfx Aafec The plant is not electrically connected. Sale as currently is at the warehouse Leipzig (see last photos). Machine has been functional before dismantling. *

Condition: excellent (used), SCM internships in excellent condition Bodpfx Aaot Hkq Rsfjlc

Condition: excellent (used), SCM contura in excellent condition Bsdpst E T I Nefx Aafjlc

Condition: new, Year of construction: 2025, Professional EBM 360B table edge banding machine. The machine is designed for edge banding of both straight and curved elements. Ideal edge banding machine for medium and large workshops and carpentry shops. Pneumatic shears for cutting the edge (adhesive tape). Solid, strong construction. This machine feeds, cuts and glues the edge. The tape feeding and cutting sensor automatically takes the cut tapes from the container. Easy to use and conveniently placed control panel. Work comfort and failure-free operation of the machine are ensured. The indisputable advantage is the simple construction and intuitive operation. TECHNICAL PARAMETERS EDGE WIDTH 10-60 (68) mm EDGE THICKNESS 0.3-3 mm MINIMUM WORKING RADIUS 20mm MAX. PERMITTED CUTTING WIDTH 50 mm HEATING POWER 2 kW POWER SOURCE 400V MOTOR 0.18 kW, 0.37 kW, 0.4 kW FEED SPEED 0-14 m/min. AIR PRESSURE 6 BAR Bljdpfx Aajwl Eaajfjc DIMENSIONS 1550 x 800 x 1000 WEIGHT 185 kg

Condition: used, Used machine Equipment and technical data: - Double-sided line boring machine - 2 drilling motors, each 1.8 kW, with oil brake cylinder - Stroke max. 130 mm - With pneumatic directional control valve - 21 spindles, spindle pitch 32 mm - Max. drilling distance 640 mm (by moving the workpiece up to 2656 mm) - Portal clearance 850 mm - Air consumption at 5 bar approx. 11 l per cycle - Extraction nozzle 160 mm Dimensions: approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: short-term Bledewlwpgepfx Aafoc Storage location: 63934 Röllbach

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 (arrived 2025) MACHINESEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales territory in Germany (Rhine-Main area and North Rhine-Westphalia). Such enquiries will not be answered. Technical specifications: Edge thickness, coil material: 0.4 – 3 mm (material dependent) Edge thickness, strip material: 0.4 – 8 mm (material dependent) Edge cross-section: max. 6 x 42 mm Edge height: max. 65 mm Workpiece thickness: 6 – 60 mm (restrictions possible for certain units) Workpiece width: min. 65 mm Workpiece length: min. 160 mm (without corner copying) Workpiece length: 180 mm Feed speed: 10 m/min Configuration: - Motorised pressure bridge adjustment - Pull-out workpiece support XL, spacing 600 mm - LED light at infeed, 3-colour - Motorised infeed fence adjustment - Extended infeed fence, 1,252 mm - I-Tronic package - Edge Control PPC 322 W controller - IntelliSet: intelligent tool offset - f.a.s.t = fast setting technology - ECO-Mode energy saving function - Prepared for RETURN connection (third-party product) - BS 501 guiding system; precise right-angle workpiece feed for edgebanding of narrow parts on end grain - Workpiece thickness: min. 10 mm - Workpiece width: min. 60 mm - Workpiece length: approx. 140 – 450 mm - FG201 jointing unit with 2 milling heads, 64 mm high - MG 301 edge feeder - GluJet GJ 725 NC PUR PRO glue application system - Automatic glue height adjustment via dosing sleeve and sensing nozzle to compensate for panel tolerances - NC axis for height adjustment - 90° swivelling for easy cleaning of the Glue Jet nozzle - Includes vacuum pump for professional processing of PUR adhesives. The vacuum pump removes the reaction partner (water molecules) from the PUR, allowing uncured PUR adhesive to remain in the system. The pump operates independently of the machine’s power supply and automatically compensates for vacuum loss. - Full control of PUR! - DW 301 pressure unit with motorised NC axis; first roller driven with pneumatic plunge control, 2 conical follow-up pressure rollers - GM301 spray unit after pressure section for high-gloss edges (slip agent) - KA 501 end trimming unit, pneumatic (60 mm) Bsdpjxymd Tefx Aafjlc - Extraction hoods for end trimming unit - FR301 MOT6 multifunction milling unit - Shelf program - FF 301 MOT1 profile milling unit - ZK301 MOT4 scraper unit incl. high-gloss kit - FK702 surface scraper - Spray unit for separation and cleaning agent, complete - GM 301 spray unit after pressure section (high-gloss edges) - SW 501 buffing unit Piping above the machine is not included in the scope of delivery. Availability: short notice Location: Hochheim

Condition: ready for operation (used), Year of construction: 2012, Fritsch Rollfix 700 high performance dough sheeter designed to meet the very highest demands in engineering terms. Furthermore the all-over stainless steel structure not only strengthens this machine, thus extending its service life, but also makes the dough sheeter far more hygienic and easier to ed on a new intuitive operating concept and simple user guidance, 18 sheeting programmes are available for every dough type as standard, along with a total of 100 product memory addresses (extendable) - all of which can be managed on a 10-inch touchscreen. All programme adjustments can naturally be comfortably stored on a USB stick.  year of build 2012 sheeting speed 71m/min working width 650mm roller diameter 98mm roller gap 0.3 - 50mm Dough block processing up to 20kg Safety guard infeed height 85mm modern computer control with USB interface Automatic flour duster spooling unit Processing of large dough blocks thanks to a big roller gap (up to 50 mm) Flexible dough thicknesses due to roller gap adjustment with millimeter precision Gentle and uniform sheeting Production of filo dough Efficient control with quick reaction time Flexible programming with 100 product memory addresses Tension-free spooling-up using the automatic spooling unit Long service life due to robust stainless steel design Easy to clean due to hygienic design and good accessibility (i.e. quick release mechanism) Blodpjwfnt Njfx Aafec Minimised development of flour dust due to automatic flour duster

Condition: excellent (used), Year of construction: 2001, Langzauner edge sander EK 3/4 top condition Accessories: some abrasives still available Veneer stop jaws Table width: 350 mm Table length: 1,000 mm Maximum sanding belt width: 150 mm Sanding belt length: 3,000 mm Belt speed: 22 m/s Main motor: 2.2 kW Motorized feed Veneer sanding Circular sanding support Oscillation Bledpfxjvr Hw Ij Aafoc Height adjustment: table, manual Sanding belt pivotable: Yes Conformity marking: CE mark Total connection: 4.6 kW Space required: Length: 1.7 m Width: 0.85 m Height: 0.9 m Location: from stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2024, The robust Junior R1 offers all the features that a modern edge sanding machine must have. A solid cast iron sanding unit with a powerful powerful motor ensures maximum sanding performance. The working table, adjustable in height by spring pressure, allows optimum belt utilization and safe working. Bjdpsd R Ev Djfx Aafolc Belt oscillation, infinitely variable unit swiveling, and veneer unit, a veneer sanding device and an additional table for and an additional table for sanding work on the on the deflection roller. The machine is supplied with an assortment of sanding belts; an angle and miter fence is also included. Technical data: - Motor power: 2.2 kW - sanding belt size: 150 × 2280 mm - grinding belt speed: 22 m/sec. - table size: 750 × 350 mm - space requirement: 1000 × 800 mm - weight: from 180 kg - Suction Ø: 100 mm Location: Ex warehouse 54634 Bitburg - free loading - Can be shipped for a fee

Condition: new, Year of construction: 2025, The Hebrock F 5 If you want maximum performance, the Hebrock F 5 is the solution for edgebanding in demanding craft operations. The F 5 guarantees edgebanding in all steps, as it is equipped with all the components you need to meet your requirements: Joint trimmer, cross-cut saw, trimming unit, radius scraper, corner trimmer, surface scraper, fettling station. For even more flexibility on the way to the perfect finish, the F 5 can be optionally equipped with a practical multi-radius scraper. max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next - 10 m/min Edge banding machine F5 Next With PLC control (incl. touchscreen) and with hot-melt glue application to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide tool) up to 2 mm cutter depth, maintenance-free glue tray with change tray pre-equipment incl. glue discharge device, HF cross-cut saw station (approx. 12000 rpm), HF trimming station (approx. 12000 rpm) with separate pneumatic routing adjustment and exchangeable panel router (combination version), corner rounding router, radius scraper, surface scraper (incl. pneumatic lift), cleaning station, robust chain drive, ball bearing mounted double roller top pressure, viewing window from the rear of the machine, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change attachment for corner router Bodpfolht Hwex Aafslc F5/08/5 additional exchangeable motor corner router with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spraying device for release agent F5/24/2 Spraying device for cleaning agent F5/25 Edge spraying device F5/27. nesting for router and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush trimming) Location: From stock 54634 Bitburg - available in CW4 -

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. Blodpfxji Am U Do Aafjc F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to a milling depth of 2 mm), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Bedpolht Hzsfx Aafslc F2 - 10 m/min Edge banding machine F2 next With PLC control (incl. touch screen) and hot-melt adhesive indication to the workpiece for edgebanding material up to 3 mm; jointing cutter (incl. slide - tool) up to 2 mm milling depth, maintenance-free glue basin with exchangeable basin pre-equipment incl. adhesive discharge device, HF cross-cut saw station (approx. 12000 rpm), HF-milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate cutter (combi design), robust chain drive, ball bearing mounted double roller top pressure, viewing window from rear side of machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 undercarriage F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling)

Condition: new, Year of construction: 2025, Hebrock F 4 For complete processing of your panels For all those who don't want to do things by halves. With the F 4, we offer you a model with which you can produce fully processed edges on a machine length of just 4 m. The F 4 is not only space-saving, but also extremely attractive in terms of price-performance ratio. Max. Edge thickness 3 mm Min/Max. Workpiece thickness 8 - 50 mm Min. workpiece length approx. 160 mm Feed speed approx. 7 m/min. Ready for operation approx. 3.5 min. Max. Power consumption Ø approx. 7.4 kW Electrical connection 400 V - 3 Ph - 50 Hz Work table height approx. 900 mm Machine dimensions approx. 4050 x 1300 x 1400 mm (LxWxH) Weight approx. 820 kg Suction nozzle Ø 1 x 140 mm PLC control 10″ touchscreen Top-mounted rapid-heat adhesive container (maintenance-free) Support plate for edging material Automatic central lubrication (cross-cut saw, corner router) Visual display for workpiece sequence Extension arm (can be pulled out to the front) Interchangeable basin pre-equipment incl. adhesive changing device for PUR processing Surface scraper with dual tracing Pneumatic roller capping (scissor cut design, Hebrock system) Double roller top pressure (ball bearing) Transport chain with bolted special chain plates Jointing cutter Milling unit cross-cut saw Bljdpfxjhqadcs Aafsc Corner cutter Accessories: F4/09 Radius scraper (incl. pneumatic lift) F4/09/4 Multi radius scraper (R1/R2) F4/30 Pneumatic 3-point adjustment Location: From stock 54634 Bitburg - available at short notice -