Used Storage Machine for sale (72,323)

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. Dkodpfxeyaywhe Albet *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 850-8100 MX injection molding machine – with servo drive Year of manufacture: 2013 Control system: MC5 Clamping system: hydraulic-mechanical, two-platen Drive: hydraulic with servo drive Design and control Hydraulic-mechanical, two-platen clamping system with 4 pressure cushions and 4 adjusting units mounted on the moving platen. PV – injection unit adjustment. MC5 PC (Pentium) control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with wear-resistant coating. Screw diameter: 105 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 8500 kN / 850 t Opening force: 560 kN Mold mounting plate dimensions (H × V): 1600 × 1600 mm Distance between tie bars (H × V): 1140 × 1140 mm Mold opening stroke: 1600 mm Minimum/maximum mold height: 500–1100 mm Maximum distance between platens: 2100 mm Ejector stroke: 300 mm Ejector force, front/rear: 200 / 100 kN Injection unit 8100 Screw diameter: 105 mm Dodpfx Aljzvm A Iebekt Maximum injection pressure: 1778 bar Injection volume: 4546 cm³ Injection weight for PS: 4137 g Injection rate: 805 cm³/s Screw speed, standard / optional: 121 / 153 rpm Electro-hydraulic equipment Servo drive for the hydraulic system: YES Rated power of the pump motor: 110 kW Number of dry cycles according to EUROMAP 6: 965 cycles/h Oil tank capacity: 1500 l Dimensions and weight Machine dimensions (L × W × H): 10.81 × 2.92 × 2.57 m Net weight with control cabinet: 43.5 t

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, CNC Machining Centre – Horizontal | Brand: HÜLLER HILLE | Type: nbh 170R Year of manufacture: 2005 The machine can be inspected under power by prior appointment. Condition: In working order / ready for operation. TECHNICAL SPECIFICATIONS: Working area - X/Y/Z axes: 1.000/800/800 mm - Workpiece swivel range within the working area: Ø 900 mm - Distance from table centre to spindle nose in Z: 138.9 (HSK-A 100) mm Position measurement system - Encoder scales: direct (measurement method) - Position uncertainty A according to DIN ISO 230-2: 0.007 mm Dedszviaispfx Albekt 180-degree pallet changer with 4 x 90-degree pallet rotators Pallet - Pallet clamping surface to DIN 55201, Form A2: 500 x 630 mm - Transport load per pallet: approx. 0,8 tons - Height of the system: 1.100 mm NC rotary table (B-axis) - Smallest incremental step: 0,001 degrees - Repeatability: ± 0,001 degrees - Accuracy across all positions: ± 0,002 degrees - Permissible torques on the clamped table: * Tangential torque: max. 7.000 Nm * Tilting moment: max. 16.000 Nm - Clamping forces: * on the table: 147.000 Nm * on the pallet: 84.600 Nm Working spindle / gear head - Tool holder to ISO 12164 (DIN 69893): HSK-A 100 - Diameter at front bearing: 100 mm - Drive power 100% duty cycle/60% duty cycle: 37/46 kW - Speed range: 25 – 10.000 rpm Feed / Feed force / Rapid traverse: - Feed range X/Y/Z axes: 1 – 60.000 mm/min - Feed force on X/Y/Z axes, 25% duty cycle: approx. 15.000 N - Rapid traverse speed, X/Y/Z axes: 60 m/min - Rapid traverse, rotary table: 30 rpm - Acceleration: approx. 6 m/s² - Ball screw (pitch): Ø 50 (30) mm Tool magazine for 4 magazine cassettes, including two additional magazine cassettes. Electrical - Rated power: 74 kVA Compressed air Coolant system, make: KNOLL The internal coolant supply can be switched to compressed air. - Coolant pump 20–70 bar - Coolant tank, 2.500 l Machine layout - Space requirements, L x W x H: approx. 8 x 3.5 x 3.5 m - Weight: approx. 24 tons ACCESSORIES / EQUIPMENT: - Control system: Siemens SINUMERIK 840D ADDITIONAL EQUIPMENT FOR AUTOMATED MANUFACTURING PALLET STORAGE SYSTEM Technical data sheet with full details, including information on the wide range of features, available on request. No guarantee is given as to the completeness or accuracy of the technical specifications and specifications. – Subject to prior sale –

Condition: used, Year of construction: 2007, Machine design: Cantilever machine Travel in X-direction: 5000 mm Travel in Y-direction: 1815 mm Travel (Z-axis): 600 mm Clearance height: 370 mm Number of main spindles: 1 Main spindle power: 12 kW Main spindle speed: 600-24000 rpm Vector-controlled spindle: Yes Clamping system: HSK-63 F Spindle cooling: Liquid cooling Number of axes: 5 Tool changer: Disc tool changer Tool change positions: 24 Back wall milling units: Yes Vertical drilling spindles – in X-direction: 12 Spindle speed vertical drilling spindle: 2000-6000 rpm Horizontal drilling spindle in X-direction: 2 + 2 Horizontal drilling spindle in Y-direction: 1 + 1 Spindle speed horizontal drilling spindle: 2000-6000 rpm Monitor size: 15" Control type: PC control Operating system: Windows XP Typewriter keyboard: Yes Mouse: Yes Programming system: xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Floppy disk drive: Yes Table design: Console table, tubeless Stop system: Stop cylinders Support arms: 8 Suction plates and clamps: various included Linear guides: 2 Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Alternating field configuration: Yes Safety guard, left: Yes Dodpfx Alezwg H Asbjkt Safety guard, right: Yes Extraction hood: controlled via axes Setup aid: Dot laser setup aid Safety features: Safety floor mats Central lubrication: automatic Tools: various tools available at an extra charge Dimensions: 7820x4730 mm Extraction diameter: 300 mm Storage location:

Condition: excellent (used), With acid-resistant section, with high pressure nozzles, equipped with a conveyor Overall Size: 9,5 x 1,15 x 1,9 m Djdpfx Alot Ity Dsbskt Opening size: 530 x 250 mm Chemical tank (heated): 0,5m³ Rinse tank (heated): 0,3 m³ Drying fans: 12db Voltage: 380 V

Condition: used, Second-hand machine In all operating modes, the materials are fed from the front through the roller gap and joined together by pressure Standard number of axes: Material unwinding 2 Silicone paper unwinding 1 Roller gap adjustment 0–52 mm Dodjznk A Nspfx Albekt Pressure 0.3–0.8 N/mm Processing speed maximum 5 m/min Slow operation 0.6 m/min Reverse operation 0.6 m/min Noise level > 70 dB(A) Material data: Max. width 1400 mm Max. material diameter: Unwinding diameter 200 mm Silicone paper take-up diameter 150 mm Max. panel thickness 50 mm Inner diameter of roll core: 76.2 mm Power supply 230 V Availability: short notice Storage location: Röllbach

Condition: used, Second-hand machine Features and technical specifications: - Universal dowel drilling machine for horizontal and vertical drilling - Working width 720 mm - with drilling beam, drive motor 3 PS, 2800 rpm Dkedpozk N Atofx Albot - 23 drilling spindles, drilling pitch 32 mm - Pneumatic workpiece clamping via foot valve - 2 stop rails, 1000 mm - with chassis Availability: at short notice Storage location: 63934 Röllbach

Condition: like new (used), Year of construction: 2008, travel distance X-axis: 700 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 700 mm, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 68 kVA, controller manufacturer: HEIDENHAIN iTNC 530, workpiece height (max.): 1,000 mm, workpiece diameter (max.): 800 mm, workpiece weight (max.): 600 kg, total height: 2,547 mm, total length: 5,866 mm, total width: 4,196 mm, table width: 500 mm, table length: 500 mm, overall weight: 12,000 kg, spindle speed (max.): 18,000 rpm, spindle motor power: 34,000 W, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, CNC controller: HEIDENHAIN iTNC 530 Axes: X-axis travel mm: 700 Y-axis travel mm: 700 Z-axis travel mm: 700 Distance spindle nose - table surface mm: 100 - 800 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 6 / 6 / 5 Worktable: Number of pallets: 2 + 5 Table dimensions mm: 500 x 500 Maximum workpiece size (D x H) mm: 800 x 1.000 Max. workpiece weight kg: 600 T-Slot version: DIN 55201-A2 APC time s: 9,5 División estandar Grados: 360º (1º) Spindle: Spindle speed rpm: 18.000 Spindle drive power kW: 34 / 28 Spindle torque Nm: 110 Tool system: Tool holder: HSK-A63 Tool magazine slots: 120 Max. Tool Diameter: 80 Max. Tool Length mm: 550 Max tool weight kg: 12 Chip-to-chip time s: 2,9 Equipment: Electronic Handwheel Chip conveyor Rotating inspection windows Rinsing gun Signal lamp Tool breakage probe 3D quickSET Workarea light CE conformity Cooling device blowing air through spindle center, selectable via M-function MPC – Machine Protection Control Paper band filter Infrared Probe Heidenhain TS640 Blum laser tool measurement Taper clear brushes Blum laser NT Hybrid Round pallet Storage (RPS 5) Measuring probe Heidenhain TS 640 Production package Internal cooling supply 40 BAR Cooling: Cooling through the Spindle Center bar: 40 BAR Dkodpfxowhdhze Albet Tank capacity: 980 High-pressure bar: 40 BAR Machine running times: Under power: 95.210 Operating Time: 44.971 Rated power kVA: 68 Basic machine dimensions / weight: Length mm: 5.866 Width mm: 4.196 Height mm: 2.547 Weight kg: 12.000.

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Djdpfszvm Dlsx Albekt Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: good (used), Year of construction: 2012, Traverses X Y Z: 785 x 470 x 530mm, Table size 900mm x 500mm, spindle speed 8000rpm, spindle motor power 11kW, Prototrak, rapid feed XYZ axis 20m/min, Dkedpoq R Tnzefx Albjt Spindle taper BT40, 16 station ATC, swarf auger.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, controller model: PLC Siemens S7, production capacity: 4,000 unit/h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Capacity: 4,000 bottles/hour Dimensions of screw cap: 30 × 10 mm Dimensions of PET bottle (20 ml): 26.05 × 48.38 mm MACHINE DETAILS Control system: PLC Siemens S7 Sorting hopper Height of transport chains: approx. 1,000 mm ± 50 mm Power consumption: 2.5 kW Voltage supply: 380/400 V Fuse rating: 16 A EQUIPMENT Centrifugal cap sorter made of stainless steel AISI 304 with cap level sensor Cap feed chute made of stainless steel AISI 304 with electronic cap jam detector Manual device for removing misaligned caps Pick-and-place system Capping heads with magnetic clutch and cap cone Dkodpfx Aszyihhelbst Bottle neck ring centering with spikes Frequency-controlled geared motor Special design of the height adjustment range for handling bottles outside the height adjustment range Anti-rotation device Protective device to cover the bottles Electric height adjustment of the capping head Axially adjustable worm Control cabinet Machine drive via Danfoss VLT 2800 frequency inverter Touch panel for operation FESTO pneumatics Diameter of the feed table: 800 mm Feed table with frequency inverter and separate drive Conveyor extension at the machine inlet: 500 mm Conveyor extension at the machine outlet: 200 mm Sensor control Mechanical cap feeding system with floor-mounted storage container Vertical conveyor made of stainless steel AISI 304 with cap conveyor belt

Condition: excellent (used), Year of construction: 2019, Traverses X Y Z: 1524 x 596 x 584mm, Table 1930 x 356mm, Spindle speed 5000rpm, Motor 5.75kW, ProtoTRAK SMX 3 axis control, ISO40 Spindle taper, 127mm Quill Travel, Interlocked guards, Power Drawbar, low Volt light. Dsdpeyynvyefx Albjkt

Condition: good (used), EKH-455 Shrink Wrapping machine Machine ready to use. Photos show the actual product. Description: The main advantages of shrink wrappers include simultaneous sealing and shrinking, small dimensions, and easy portability. They are an ideal solution for shops, bakeries, warehouses, archives, bookstores, etc. They offer adjustable sealing time and heater temperature, and can also shrink PVC and polyolefin films. Technical Specifications: Power Supply: 230 V Power: 3.77 kW Maximum Product Dimensions: 520 x 390 x 250 mm Dkjdpfxezur Ado Albet Sealer Dimensions: 550 x 420 mm Weight: 125 kg

Condition: used, Second-hand machine Condition: as expected for its age Table size 2600 x 900 mm Max. usable sanding length 2,700 mm Belt length 7,800 mm x 150 mm 1100 mm, right-hand bend Motor 5.2/7.5 kW with belt blow-off nozzle Shipping dimensions: 4300 x 1650 x 1800 mm Weight: 1,300 kg Dedezk Ntxjpfx Albskt Availability: at short notice Storage location: Röllbach

Year of construction: 2018, condition: used, x-travel 4000 mm y-travel 2000 mm z-travel mm 4000 bar total power requirement 35 kW weight of the machine ca. t dimensions of the machine ca. m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 "touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC® module / machine info iMSNC® module / user management Djdpfx Asg N Nlvslbskt "AsperWin Basic" programming system for programming directly on the Machine control "AsperWin Select" macro library module Mod ul NC simulator "AsperWin NC-Sim" 2. USB 3.0 connection option for storage medium 3. Remote maintenance module MicroStep RemoteDiagnostics® Remote maintenance access through TeamViewer 4. Water jet cutting table with grate support / 4,000 x 2,000 mm Working area 5. Automatic height control for the water jet cutting head 6. BFT high pressure pump ECOTRON ® 40.37 7. Automatic pump control 8. Allfi® cutting head type IV (1 piece) 9. Allfi® abrasive head CENTERLINE type II "Long Life" (1 piece) 10. Allfi® abrasive dosing system 11. Allfi® abrasive conveyor system type II 12. Automatic abrasive dosing via the CNC control 13. High pressure installation material for connecting the high pressure pump to the existing water network 14. Error messages via SMS via the iMSNC control 15. GSM modem for the iMSNC control 16. Double-sided rope protection (collision protection) over the portal bridge Emergency stop switch 17. Desludging plant (scraper conveyor) for a length of 4,000 mm 18. Water stabilization by means of a metering device and addition of Water chemistry 19. Water chemistry WI N2054Si 20. CAM software "AsperWin Basic" for programming

Condition: used, Second-hand machine Features and technical specifications: - double-sided in-line drilling machine - 2 drilling motors, 1.8 kW each, with oil brake cylinders Dedpfezk Nrbox Albokt - Stroke: max. 130 mm - with pneumatic changeover valve - 21 spindles, spindle pitch 32 mm - Drilling spacing: max. 640 mm (by moving the workpiece max. 2656 mm) - Gantry clearance 850 mm - Air consumption at 5 atü: approx. 11 l per cycle - Extraction connection 160 mm Dimensions: approx. 3100 x 1100 x 1800 mm Weight: approx. 350 kg Availability: at short notice Storage location: 63934 Röllbach

Condition: good (used), Year of construction: 2011, 400mm swing over bed, Dsdpfjucdt Aex Albjkt 216mm Swing over the Cross-slide, 760mm between centres, 54mm spindle bore, 2500rpm spindle, 5.75kW Spindle Motor, Prototrak SLX Control, 3 jaw chuck, auto toolpost, Tailstock, Coolant

Condition: good (used), Year of construction: 2012, Ref. -No.: 10659 Manufacturer: DECKEL MAHO Type: DMC 835V Year of construction: 2012 Type of control: CNC Control: Haidenhein iTNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 1541XXX X-Travel: 835 mm Dodpfx Aszw Tw Uelbokt Y-Travel: 510 mm Z-Travel: 510 mm Number of T-slots: 5 Max. Tool Weight: 6 kg Max. Tool Length: 250 mm Max. Tool Diameter: 80 mm Tool change time: 1,6 s T - groove width: 14 mm T - slot spacing: 100 mm Tool Taper: SK40 Numbers Of Tools In Magazin: 30 Spindle Speed: 12000 RPM Max. Torque: 130 / 87 Nm Turning Speed Range - Stepless: 30 mm / min Total Power Requirement: 35 kW Dimensions Of The Machine Ca.: 4,5 x 3,5 x 2,7 m Weight Of The Machine Ca.: 5 t Changeover time chip - chip: 6 sec Feed rate: 1 - 20.000 (X / Y / Z) High pressure cooling: 20 bar Further information: The machine can be inspected while powered on by prior arrangement.

Year of construction: 1992, condition: ready for operation (used), Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used much since. Dedpfx Alsq Ixglsbekt

Condition: good (used), Year of construction: 2007, operating hours: 24,210 h, screw diameter: 32 mm, This Dr Boy injection moulding machine is currently in storage at Plastima Used Machinery. The machine is from 2007 and has relatively few operating hours for its age. - Brand: Dr Boy - Model: 55M Dkedpszuk E Dsfx Albst - Year of manufacture: 2007 - Screw diameter: 32 mm - Shot volume: 96.5 cm³ - Clamping force: 55T - Operating hours: 24,210

Condition: good (used), Laminating Machine Komfi Delta 76 Stacker Manufactured in 2016/2017. The machine is 100% operational and ready for operation. This is an advanced, high-performance machine, ideal for commercial laminating. The machine is in very good condition and ready for production. Technical specifications: Max sheet size: 760mm x 1120mm Min sheet size: 300mm x 220mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 35m/min Built-in Becker compressor Weight: 2800kg 380V power supply Additional air supply: 6 bar Power consumption: 18kW Dodozlgbpspfx Albjkt Pneumatic clamping, separation, and automatic feeding from a high stack, automatic stacker. Touch panel for easy operation. Sheet straightening module. Tool kit and foil included.

Condition: like new (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 106000127, total height: 4,400 mm, total width: 2,350 mm, total length: 10,470 mm, construction height: 4,400 mm, construction width: 2,350 mm, type of input current: three-phase, input voltage: 400 V, empty load weight: 5,000 kg, input frequency: 50 Hz, input current: 29 A, Equipment: documentation/manual, Kardex Remstar LR-35 vertical buffer module (Compact Buffer / Miniload-in-a-Box) with integrated SmartLOG pick-to-light system. Year 2019. Used, good condition, approximately 7 months in service. This was the original unit at the site. It operated for about 7 months before the company ceased operations, so it is in very good working order with low operating hours. Fully commissioned and functional. Technical data (nameplate): Dkodpfezu Ttkex Albot Type: LR-35-20X400X600X4400 Serial number: 106000127 Year: 2019 Manufacturer: Kardex Produktion Deutschland GmbH, Neuburg plant Nominal voltage: 3/N/PE 400 V, 50/60 Hz Nominal power: 20.0 kVA / 28.8 A Max. load per bin: 35 kg Certification: CE, TUV SUD, GS Configuration: Dimensions: 2,350 mm wide x 10,470 mm long x 4,400 mm high Storage: 2 aisles x 20 portals x 17 levels 675 bins of 400 x 600 x 122 mm Useful volume: 19.76 m3 Throughput: 110 to 130 bins per hour At 4.4 m high, the machine fits a standard warehouse, unlike taller LR units that require a very high building. Location: San Sebastian, Spain. Sold ex location, buyer arranges dismantling and transport. Full documentation available (invoice, CE declaration, manuals, technical specification, and layout drawing). A second identical unit (2020, never used) is also available. Price negotiable. Serious inquiries welcome.

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 800mm/800mm/800mm, feed force X/Y/Z: 15000N/15000N/17500N, feed speed X/Y/Z: 50m/min, max. rotary table speed: 25rpm, spindle diameter: 100mm, tool holder: HSK 100, spindle power S1-100%: 40kW, spindle speed: 6000rpm. Magazine capacity for a maximum tool diameter of 280mm: 23. Max. pallet dimensions X/Y: 630mm/630mm, max. pallets in the system: 6, coolant tank volume: 1500l, 50bar high-pressure pump delivery rate: 22l/min. Machine dimensions X/Y/Z: approx. 6300mm/4900mm/4000mm, weight: approx. 19,300kg, control: Siemens 840D powerline, operating hours: 74,637h. Includes integrated tool monitoring IPM, remote diagnostics via modem, Renishaw MP10 touch probe, RSP 4-position round storage, chip removal, coolant system with Knoll VRF 250 vacuum rotary filter, pallet changing device, 6 pallets, 4 of which are clamping towers with universal clamping bars, approx. 100 HSK 100 tool holders, and Losma filter system. Documentation available. On-site inspection is possible. Expected to be available from the end of January 2025. Dsdpfxeuxdhus Albekt

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg Dkedjwk Rlxopfx Albot

Year of construction: 2022, operating hours: 2,000 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 22015404-1, The blister packaging machine is in very good condition and is fully operational and functional. A test run of the machine and inspection of its operation are possible. The machine has been regularly maintained and serviced. Upon sale, all available additional spare parts and replacement components will be included. In addition to the blister packaging machine, the package also includes the following components that were additionally ordered alongside the basic machine. Camera inspection system for blister monitoring, a machine for secondary packaging of blisters SDZ-100, and a chiller for cooling the film from which the blisters are thermoformed. You can produce blister "0" 120x70x15 and blister "00" 120x70x30. All machines are supplied with the relevant technical documentation and CE certificates. Dksdpfsyuc Hzjx Albjt All technical specifications, dimensions, the machine layout, as well as catalogs and instructions can be found in the attached PDF files.