Used Sterilization for sale (198)

Condition: used, Year of construction: 2002, Cylindroconical stainless steel tank with glycol cooling for frame and cone, ventilation nozzle at the outlet and various fittings. Wall thicknesses: - Cone 3 mm - Frame 2 mm - Clamp bottom 3 mm Cone angle: 120° Roughness of cone interior < 0.35 µm Additional title: Vertical, cylindrical-conical, coolable stainless steel tank Volume: 4681 liter Working pressure tank: 0,99 bar Working presure double jacket: 0,9 bar Width: 2.3 m Height: 2.5 m Material: V2A stainless steel 1.4301 (AISI 304) Rcsdpfsztza Ajx Adqsf Base construction: cylindroconical, opper bottom dished shell, on 3 cabinet legs one is 50mm shorter for a load cell Features: 3 cooling zones with volumes of 7 and 14 and 34 liters, coolant = glycol solution, connection size inlet (one each) DN 20, connection size outlet (one each) DN 25, sight glas DN100 mit halogen lamp,CIP head, air duct with sterile filter, standpipe, outlet pipe DN 65 with disc valve, manhole with lid, sampling tap, temperature sensor, load cell, Safety fitting consisting of over pressure pipe with valve, manometer and flap valve DN32

Condition: used, Year of construction: 1998, Velcorin dosing system for the cold sterilisation of beverages during bottling. Velcorin is drawn from a storage tank and injected into the product stream via a dosing pump. System out of service. Ideal as a source of spare parts. Additional title: Cold sterilizing Rjdpezty S Defx Adqocf Capacity: 7200 l/h Maximum permissible dosing rate: 20 ml/hl Features: Velcorin storage tank; compressed air connection; dosing pump (Cibus 32 lubricant); flow/volume measurement module; pneumatic control block; centrifugal fan; control panel with buttons and warning lights; various valves, actuators and sensors

Condition: used, Carbonisation reconditioned by ACM. Automated by Mommert in 2016. Additional title: Baujahr: 1991 - 2016 Capacity: 10000 l/h CO2 regulating range: 7 g/l Length: 2,6 m Width: 0,75 m Height: 2,0 m Weight: 400 kg Operation / Control: Siemens Simatic HMI Features: CO₂ compensation line DN100 (approx. 14.2 m long); control cabinet (with HMI touchscreen, S7-300 control module, switching power supply, 2 universal transmitters); ACM continuous online CO₂ measurement; CO₂ flow meter; pneumatic control valve; Air sterilizing depth filter; 2/2-way pneumatic angle seat valve, PT 100; pressure transmitter; air filter; sampling valve; additional piping, valves, and fittings Rjdpfeztykmsx Adqjcf

Condition: used, This listing is for the Amersham Pharma 35L BPG Cromatography Column The unit is in full working condition and is ready for immediate use BPG stands for Bio‑Process Glass or BioProcess Glass (sometimes called BPG columns). They are process‑scale chromatography columns used in biopharmaceutical / downstream protein purification. Originally from Amersham / Pharmacia, now under GE Healthcare / Cytiva brands. Made to be hygienic, scalable, reproducible, for use in situations where high cleanliness, sterility, and regulatory compliance matter (e.g. GMP) Rcedoxhdw Hepfx Adqjf A BPG column (short for BioProcess Glass column) is a process-scale chromatography column designed specifically for downstream purification in biopharmaceutical manufacturing — particularly for the purification of proteins, antibodies, and other biologics For more chromatography columns please click here ?q=chromatography Popular Uses include – purification of drugs, antibodies, proteins and other active ingredients. – purification of proteins, enzymes, antibodies, vaccines and other biologics. – research into proteins, DNA, metabolites, pharmaceuticals and chemical compounds. – separation and purification of chemical substances and intermediates. – analysis of sugars, flavours, additives, contaminants and other components. – testing water, soil and air samples for pollutants and contaminants. – analysis of drugs, metabolites, hormones and other biological compounds. – analysis and separation of hydrocarbons and petroleum products. – analytical and purification services for pharmaceutical and biotechnology companies. – downstream processing and purification of fermentation products

Year of construction: 2022, condition: used, This listing is for a 2022 Rodwell Ambassador Autoclave. (Last Service July 2025) The unit is in full working condition and ready for immediate use. This heavy-duty, front-loading floor autoclave features an advanced MP25 intelligent cycle controller, a high-grade stainless steel chamber, and space-saving sterilization engineering Transparency Report and Technical Audit: Rodpsza E Dyjfx Adqocf • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, Year of construction: 2008, operating hours: 34,590 h, machine/vehicle number: R81, Used Aseptic Filling Machine Tetra Pak A3/Flex 150V TBA 1000B – Overview This second hand Tetra Pak A3/Flex 150V TBA 1000B is a proven aseptic carton filler engineered for industrial packaging and beverage production. Configured for Tetra Brik Aseptic 1000 ml (Base) packs, it delivers reliable, continuous operation for UHT milk, juices, and other shelf-stable beverages. With a nominal capacity of approximately 7,000 packs/hour, this used bottling line component combines high throughput with aseptic integrity for modern carton packaging. Technical Specifications & Performance Data Manufacturer: Tetra Pak Model: A3/Flex 150V TBA 1000B Year of manufacture: 2008 Filling type: Aseptic (non-isobaric carton filling) Package format: Tetra Brik Aseptic 1000 ml (Base) Nominal speed: ≈ 7,000 packs/hour Working hours: ≈ 30,000 hours Utilities Rsdpfsx H Thujx Adqjcf Electrical: 400 V, 50 Hz, 3-phase Installed power: up to ≈ 50 kW (typ. 35–50 kW depending on configuration) Compressed air: 6–8 bar, ≈ 300–500 Nl/min Water/steam: ≈ 0.5–1.0 m³/h (for processing/sterilization utilities) Dimensions & Weight Approximate footprint (L × W × H): 7 × 3 × 4.5 m Approximate weight: ≈ 7,000 kg (model range 6,000–8,000 kg) Note: Technical values are indicative for this A3/Flex configuration and should be confirmed during inspection/FAT. Advanced Automation & Control Systems The A3/Flex platform features OEM PLC-based control with a touchscreen HMI for recipe handling, alarms, and diagnostics. Motion control synchronizes forming, filling, and sealing cycles to maintain aseptic integrity and packaging quality at high speeds. Typical capabilities include: Recipe management for UHT milk, juices, and beverage variants Integrated process supervision and event/alarm logs I/O provisions for upstream/downstream line devices Recommended verification prior to start-up: PLC functions, valve actuation, pump performance, and seal integrity Production Line Integration Capabilities This aseptic carton filler integrates efficiently within a used bottling line or new beverage production layout: Upstream: packaging material feed and sterilization modules as per OEM design Downstream: conveyors to accumulation, straw/cap applicators, case packers, palletizers Utilities/process: interfaces for CIP/SIP connection to plant systems, sterile air, water, and steam Controls: standard digital/analog I/O and fieldbus-ready architecture depending on configuration Ideal for second hand industrial packaging projects requiring aseptic carton formats and stable high-speed operation. Machine Condition & Maintenance History Condition: used, currently in storage Approximate machine hours: ≈ 30,000 Operational note: continuous production achievable with proper preventive maintenance Recommended checks before commissioning: pumps, aseptic valves, PLC functionality, elastomers and seals Routine inspection, replacement of wear parts, and validation of aseptic barriers are advised prior to restart. Operational Performance & Versatility Product scope: UHT milk, juice, and shelf-stable beverages

Year of construction: 2020, condition: ready for operation (used), An autoclave Stock DFT including a Jumag steam system for the food industry is available. Batch trolley capacity: 2, process method: steam-water spraying, application: sterilization/pasteurization, gross volume: approx. 1550l, steam system: Jumag DG560, steam output: approx. 560kg/h. Including 6 batch trolleys. Documentation available. An on-site inspection is possible. Rcsdpfxoyh Nvgj Adqsf

Condition: ready for operation (used), Year of construction: 1986, Output at 45 PSIG: 440kg/h, max. pressure: 8bar, max. temperature: 121°C, material: stainless steel, steam: sterile, machine dimensions X/Y/Z: approx. 1200mm/800mm/2850mm. On-site inspection is possible. Rcedpeugmwfsfx Adqjf

Condition: ready for operation (used), Year of construction: 2018, Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible. Rcodpfx Aoygmcdedqjf

Year of construction: 2015, condition: ready for operation (used), A pharmaceutical sterilization autoclave Bosch (Schoeller-Bleckmann Medizintechnik) is available. Design: horizontal, doors: 2, chamber volume: approx. 1800l, process method: vacuum/steam/sterilization, sterilization goods: porous goods/solid instruments/components, max. liquid product volume: 50ml. Documentation available. An on site inspection is possible. Rsdpfx Adoyuyvyeqocf

Year of construction: 2007, condition: ready for operation (used), A complete bottle filling, sterilizing, capping, labelling, cartoning and palletizing line for the wine industry is available. Bottle filling capacity: 4000 bottles/h, bottle format sets: 1l and 0.75l Schlegel/Bordeaux/Bugunder/0.5l/0.25l, sterilizer capacity: 4000 bottles/h, capper capacity: 8000 bottles/h, labelling capacity: 10000 bottles/h, capping capacity: 10000 bottles/h, carton formats: 12 and 6-bottle crates/12 and 6-bottle cartons, palletizing capacity: 1000 cartons/h. Line components: 1) Normpack Compact Form CF 670/980 carton folding machine, year of manufacture: 2000, output: approx. 650 cartons/h, 2) Stork VV-24 L.W. bottle filling machine, Year of manufacture: 1977, 3) Silmo ST XII/110 v ozone immersion bath sterilizer, year of manufacture: 1983, bottle formats: all standard wine bottles, 4) Miho LC 2000 caustic tester, year of manufacture: 2003, 5) Kapsler Robino & Galandrino Monoblocco Fenix 3, year of manufacture: 2002, 6) Syscona Unicount closure checker with counter for cork and metal closures, 7) Garnep Lebetta 4/3/18 1320 labeller, year of manufacture: 2017, including 2x wet gluing units, 3x SK units, camera system for rough alignment of bottles and domino laser for imprints, 8) Adelski PP2004 Longcap automatic capping machine, year of manufacture: 2007, 9) Adelski MCA PV 6541/1/210 AVM2104 automatic capping machine, year of manufacture: 1999, 10) Corker Bertolaso Delta, year of manufacture: 1977, 11) Carton sealing machine Normpack NCF-047, year of manufacture: 2001, including hot melt gluing unit, 12) Packaging machine Kettner Robot Junior Packer BE 2-T, year of manufacture: 1992, 13) Pallet loading machine Kettner Pressant Universal 1200, year of manufacture: 1992, 14) Crate labeling machine Weber Legi-Air 40XX, year of manufacture: 2004, 15) Dryer Okema T3, year of manufacture: 1999, 16) Carton printing machine Blum CompactLine 3. 0, number of heads: 8, printing options: double-sided, 17) Silmo 40g ozone generator, year of manufacture: 1983, 18) Schaberger glass lifting machine, year of manufacture: 1977, including new glass head, 12-bottle crate head and bottle table. Documentation available. On-site inspection is possible. Redpfjvur Htex Adqjcf

Condition: ready for operation (used), Year of construction: 1988, A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless steel, process: centering, internal cleaning station, 2x sterilization stations, filling process preparation, filling station, waiting station. 4) CIP cleaning station for kegs, max. cleaning capacity: 180kegs/h, cleaning agent tanks: 5, tank volume: 650l, tank contents: caustic 1/caustic 2/acid/hot water/mixed water. Furthermore, the system includes the complete pallet conveyor, keg conveyor and a Kuka robot for depalletizing and palletizing of the kegs. Documentation available. On-site inspection is possible. Rcsdpfjycigksx Adqsf

Year of construction: 2010, condition: ready for operation (used), A high-pressure homogenizer GEA is available. Stroke: 100mm, plunger diameter: 80mm, max. operating pressure: 200bar, throughput capacity: approx. 14000l/h, max. product temperature: 90°C, max. process temperature cleaning/sterilization: 140°C, machine dimensions X/Y/Z: approx. 2250mm/1600mm/1600mm, weight: approx. 3500kg. Including control cabinet and spare parts. The unit has new gearboxes. Documentation available. An on-site inspection is possible. Redeyx H Huepfx Adqjcf

Condition: used, Year of construction: 2024, machine/vehicle number: M333, Used SIG Combibloc Filling Line – 26,500 BPH Technical Specifications & Performance Data This SIG Filling Combibloc HMR - 7478 is engineered for high-efficiency aseptic filling in small-format packaging. Manufactured in 2024, it combines reliability with precise dosing for demanding beverage production environments. Designed within the SIG-2 Combibloc ecosystem, it integrates advanced sterilization and high-speed handling to support continuous industrial packaging operations on a used bottling line or second-hand installation. Line Volume Speed Equipment Description Year of Manufacture SIG-B HMR - 7478 65ML, 125ML, 200ML 26500 H2O2 Supply System, Concentration Check 2024 Filling Machine CFA 1224 & Accessories 2024 Rsdpjzdipuofx Adqjcf CONVERSION KIT FOR FILLER SPEED UP 2025 Manufacturer: SIG Model: HMR - 7478 Rated Speed: 26,500 BPH Fill Volumes: 65 ml, 125 ml, 200 ml Sterilization: H2O2 system (SIG COMBI 2024) System Compatibility: SIG-2 Combibloc 1224 filler platform Upgrades: Filler speed-up conversion kit (SIG-2 2025) Formats: Compatible with 0.065L, 0.125L, 0.2L package sizes Advanced Automation & Control Systems The Combibloc leverages SIG engineering for controlled aseptic operation. The H2O2 sterilization module, updated in 2024, enables reliable decontamination of packaging pathways, while synchronized drives and servo-controlled movements maintain accuracy at high throughput. Operator interfaces, including a modern HMI touchscreen, are designed for intuitive changeovers and monitoring, supporting stable runtime in industrial packaging applications. Integrated safety logic and interlocked stainless steel guards protect operators and ensure hygienic operation during beverage production. Production Line Integration Capabilities Built for seamless line integration, the Combibloc interfaces with upstream and downstream equipment across SIG-2 Combibloc systems and compatible packaging machinery. It supports inline operation with conveyors, accumulation, and downstream secondary packaging. Quick format change principles accommodate small-size ranges from 65 ml to 200 ml, enabling fast product switches and efficient SKU management in complex used bottling line layouts. Machine Condition & Maintenance History Configured as a high-tier solution suitable for immediate integration, the unit is aligned with SIG-2 Combibloc filler standards and includes the available H2O2 system upgrade. A speed-up conversion kit (2025) is installed for enhanced capacity. This filling Combibloc presents...

Condition: used, machine/vehicle number: LC540, Used aseptic filling line Tetra Pak A3 FLEX V150 200S up to 7000 l/hThe Used aseptic filling line Tetra Pak A3 FLEX V150 200S up to 7000 l/h provides an advanced solution for the aseptic bottling of dairy products and fruit juices. Consequently, this line fills 200 ml Slim Brick containers, ensuring high production efficiency and maintaining the sterility of the product throughout the entire packaging process.Line Features of the Used aseptic filling line Tetra Pak A3 FLEXThe bottling line operates with a capacity of up to 7000 liters per hour, ensuring high standards of safety and quality. Furthermore, the aseptic system prevents bacterial contamination, making this solution ideal for packaging sensitive liquids. Additionally, the line includes a conveyor system that facilitates the smooth transfer of containers between different processing stages, ensuring an uninterrupted workflow.Machines Included in the LineTetra Pak A3 FLEX V150 200 ml Slim Filler (year 2006)The Used aseptic filling line Tetra Pak A3 FLEX relies on the Tetra Pak A3 FLEX filler, which aseptically fills 200 ml Slim containers. Moreover, this machine utilizes an advanced sterilization system to guarantee the microbiological safety of the packaged product. The filling process ensures precision, thereby minimizing waste and maintaining accurate dosing.Tetra Pak Straw Applicator 22 (year 2009)The Tetra Pak Straw Applicator 22 automatically affixes straws to 200 ml Brick containers. As a result, its integration into the production line enables precise and fast application, improving the product’s ergonomics for the end consumer.Flow Management and Buffering: Tetra Pak Accumulator ACHX30-0500-47M (year 2010)The ACHX30-0500-47M accumulator optimizes production flow by regulating container transport between different processing stages. In addition, this component ensures a continuous workflow, preventing interruptions and maintaining a consistent production rate even when downstream machinery operates at variable speeds.Tetra Pak Cardboard Packer 70 (year 2003)The Tetra Pak Cardboard Packer 70 packages Brick containers into transport cartons. Consequently, the automated system enables fast and efficient packaging, protecting units during transportation and facilitating distribution logistics.Aseptic Filling Process in the Used aseptic filling line Tetra Pak A3 FLEXThe entire system performs aseptic filling, a technology that maintains product sterility without requiring refrigeration. Specifically, the process sterilizes the container before filling, preventing bacterial contamination and ensuring an extended shelf life.Safety and ComplianceThe Used aseptic filling line Tetra Pak A3 FLEX incorporates advanced safety systems to protect both operators and the product during processing. Additionally, each machine complies with the sanitary and hygiene regulations required by the food industry, ensuring safe production in line with international standards.Conclusion of the Used aseptic filling line Tetra Pak A3 FLEXThis aseptic bottling line serves as an ideal solution for large-scale production of dairy products and fruit juices. Given its capacity of 7000 l/h, it delivers high levels of efficiency, quality, and safety. Moreover, the state-of-the-art Tetra Pak machinery ensures a reliable process, minimizing waste... Rsdpezfzh Rofx Adqjcf

Condition: used, This listing is for 1 of 3 Parker SciLog SciPres Pressure Monitor. The unit is in full working condition and is ready for immediate release The Parker SciLog SciPres Pressure Monitor is a pre-calibrated, single-use pressure sensor specifically engineered for biopharmaceutical applications. It seamlessly integrates advanced pressure sensing with disposability, offering a hassle-free setup that enhances operational efficiency in critical environments. Key Features: - Pre-calibrated Sensors: Each sensor comes pre-calibrated for immediate use, simplifying setup and reducing error risks. - Unique ID for Traceability: Each unit is pre-programmed with a unique identification number, enabling thorough traceability and data documentation through the SciLog® SciDoc software. - Integrated Calibration Data: Calibration and identity information are stored on the sensor's chip for easy access and validation. - Simultaneous Inputs: The monitor can display inputs from up to three SciPres pressure sensors at once, providing comprehensive monitoring. - Pressure Calculations: It calculates and displays both trans-membrane pressure (TMP) and differential pressure (dP) for enhanced process visibility. - Stability: Gamma-stable, NaOH stable, and autoclave stable, ensuring compatibility with various sterilization processes and chemical environments. Applications: - Filtration Processes: Ideal for monitoring pressure changes in filtration systems for efficient operation. Rcodpfx Adoxxycysqof - Chromatography: Supports precise pressure control, crucial for effective separation processes. - Reverse Osmosis: Ensures accurate pressure measurements for optimally functioning systems. - Fermentation: Monitors pressure conditions critical for bioprocessing and yield optimization. Additional Specifications: - Digital Display: Easy-to-read digital interface for real-time monitoring of pressure data. - Plug-and-Play Convenience: Designed for out-of-the-box use, allowing quick integration into existing systems without extensive setup.

Condition: refurbished (used), This listing is for a manufacturer refurbished Laboklav 55M Autoclave Deliveries UK Only The Laboklav 55M refurbished autoclave is a compact and reliable steam sterilization solution for laboratories requiring consistent performance and safety. Designed for efficient sterilization of media, instruments, and laboratory materials, it offers precise temperature and pressure control in a space-saving footprint. Fully refurbished and tested, the Laboklav 55M delivers dependable operation for research, medical, and industrial laboratory environments at a cost-effective price Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 55l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 740 x 765 x 600 Rodpfjxx An Sjx Adqscf Chamber dimensions (Ø x d in mm) 410 x 460 Steam generator 3,3kW Fast re-cooling with double jacket 1N 230V, 50Hz, 16A Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality

Year of construction: 2018, condition: used, This listing is for a Grant Controlled Rate Freezer - CRF-1 The unit is in full working condition and is ready for immediate release Product Overview: The CRF-1 Liquid Nitrogen-Free Controlled Rate Freezer is designed for precision-controlled freezing and cryopreservation of biological samples, such as embryos, stem cells, mammalian cells, spermatozoa, antibodies, tissue sections, and rodent organs. Unlike conventional liquid nitrogen-based freezers, the CRF-1 is liquid nitrogen and cryogen-free, eliminating contamination risks and making it suitable for use in cleanrooms and barrier facilities. It offers superior performance in terms of cell viability post-freezing and poses no fire hazard, unlike alcohol-based systems. The CRF-1 allows for highly accurate, reproducible, and controlled freezing rates, crucial for the cryopreservation of biological samples, ensuring optimal recovery upon thawing. Key Features: Cryogen-Free Design: The CRF-1 is free from liquid nitrogen and alcohol, offering a safer, cleaner alternative to traditional freezing methods. No contamination risk, making it ideal for use in sterile environments. Precise Cooling Control: The cooling rate is accurately controlled, especially for the critical nucleation/seeding phase, which ensures consistent and optimal recovery of cells. Wide Temperature Range: Capable of cooling down to -100°C with straws, offering a broad application range for biological cryopreservation. Simple Operation: The CRF-1 operates with or without a PC, and it can log data via PC software. Cooling profiles are displayed directly and can be customized. High Versatility: Compatible with cryovials, straws, bags, microplates, and Matrix-96-well block plates, allowing for research across multiple areas like stem cell research, transgenic embryos, mammalian cells, and more. Low Operational Costs: The CRF-1 runs at approximately 1% of the cost of liquid nitrogen-based freezing systems. Safety Features: Includes an optional Un-interruptible Power Supply (UPS) for complete cycle continuation in case of power failure. Compact & Quiet: Fits neatly on a bench-top and operates quietly, making it suitable for laboratory settings. Main Applications: Transgenic embryos research Stem cell research Clinical and research samples like lymphocytes and tissue cell lines Mammalian cell preservation (e.g., cardiomyocytes, adipose, liver, muscle) Cord blood-derived stem cells Adherent cells and stem cells in microplates Cell suspensions in numbered/barcoded arrays Robotic integration for high-throughput applications Veterinarian IVF applications Technical Specifications: Dimensions (w x d x h): 264 x 367 x 445 mm Weight: 9.8 kg Max Plate Temperature: 30°C Min Plate Temperature: -80°C (standard) or -100°C (dependent on model) Temperature Accuracy: ±0.5°C Rsdpoxv Dz Isfx Adqecf Temperature Stability: ±0.1°C Temperature Uniformity: ±1.0°C Max Cooling Rate: 10°C/min Max Temperature Stabilization Time: 5 minutes Key Benefits: Accurate and Reproducible Cooling Rates: Ensures controlled freezing rates and precise sample temperature management. Customizable Cooling Profiles: Choose from linear and non-linear profiles, or create your own tailored profile. No Cryogen or Liquid Nitrogen: Ideal for reducing contamination risk and the cost of liquid nitrogen. Low Running Costs: Estimated to cost only 1% of traditional liquid nitrogen-controlled freezing methods. End-of-Cycle Cooling Stability: Maintains a steady -100°...

Year of construction: 2026, condition: new, machine/vehicle number: AT111, New UHT tubular strilizer, homogenizer, CIP system for milk & cream - 10.000 LhTechnical Specifications & Performance DataThis tubular indirect UHT sterilizer is engineered for dairy processing with variable-speed operation and high thermal efficiency. It delivers dependable ultra-high-temperature treatment for milk and 40% fat cream with robust heat recovery and precise temperature control across each process stage.Capacity: Milk 10,000 L/h; Cream 40% fat 5,000 L/hHeat exchanger: Tubular, corrugated AISI 316 stainless steel tubesProduct inlet temperature: 8°CHomogenizing temperature: about 65–75°C (intermediate outlet available)Holding temperature: 90–95°CSterilization temperature: 135–142°C for 4 sOutlet temperature: about 20–25°CHeat regeneration: about 70% on tubular exchangerThermal profile: Heating 5→115°C (pressurized hot water at 132°C), Sterilization 115→142°C (industrial steam ~6 bar), Cooling 142→27°C (water at 17°C), Final cooling 27→25°C (water at 17°C)Balance tank: 200 L, vertical cylindrical, AISI 304 stainless steel, with 3 level probes and CIP spray ballProduct pump: Stainless steel centrifugal, special high-temperature mechanical seal, operating pressure 5–10 barElectromagnetic flow meter: Flanged, 4–20 mA outputHot water circulation group: High-efficiency pump, 14–16 bar, 10,000 L/h; stainless steel expansion vessel; safety valve; automatic refill; steam–water tubular heat exchangerTemperature regulation: Pneumatic modulating steam valve; high-efficiency steam trapOn-board CIP: Conductivity measurement, 2 chemical dosing pumps, 2 x 150 L AISI 304 tanks (acid and caustic)Construction: Pre-assembled on AISI 304 stainless steel skid with adjustable leveling feetAdvanced Automation & Control SystemsThe system is equipped with a modern automation platform to ensure stable UHT processing, traceability, and consistent product quality.Control architecture: Integrated PLC with a 12-inch HMI touch screenCabinet layout: Two AISI 304 stainless steel enclosures (electronics and pneumatics separated)Electronics cabinet: PLC, HMI, power and automation componentsPneumatics cabinet: Solenoid valves and air distributionAutomated functions: CIP cycle management, pasteurization/sterilization control, temperature regulation, alarm handling, safety interlocksProcess data logging: Continuous monitoring of temperatures, product pressure, holding time, and flow rateInstrumentation: Electromagnetic flow meter with 4–20 mA output for robust feedback controlProduction Line Integration CapabilitiesDesigned for seamless integration into dairy processing, beverage production, and industrial packaging en... Rodpszmpznjfx Adqecf

Year of construction: 2022, condition: like new (used), Due to the closure of our laboratory, we are offering a wide selection of laboratory equipment for sale, all in very good to excellent condition. All equipment has been used as intended, regularly serviced, is fully functional, and ready for immediate use. Our current inventory includes: - GCMS (Shimadzu GCMS-TQ8040 NX, Nexis GC-2030) - LC MS/MS (SCIEX Triple Quad 6500+, Shimadzu LC-40Dx3) - Shimadzu UV-1900i Spectrophotometer - Titan MPS Perkin Digestion System - Millipore Milli-Q Direct 8 Water Purification System - Vacuum Pumps - various units - Heating Mantle - Q-Msystem Pollab Temperature and Humidity Recorders - Shakers - Centrifuge - Pipetting Station - Ohaus Balance: Explorer EX12001/M - Rotary Evaporator - Cryogenic Mill - Multitube Vortexer DVX 2500 VWR Sample Preparation Device - Emergency Showers Rcodpfjxmhfrox Adqef - Laboratory Island 3000/1800 - Gas Sterilizer - Glycol Chiller and many more. This is an excellent opportunity for research institutions, universities, and companies in the biotechnology, chemical, and medical industries to acquire high-quality equipment at attractive prices. We invite you to contact us and view the equipment on-site in Olsztyn, Poland (Warmia-Masuria Voivodeship).

Condition: used, Year of construction: 1991, HAMBA BK 8006-P Ultra-Clean Cup Filling and Sealing Machine The HAMBA BK 8006-P is a high-performance, fully automatic, linear multi-lane cup filling and sealing machine engineered for the precise packaging of dairy, dessert, and liquid food products. Built to rigorous German engineering standards, this system combines exceptional throughput with advanced "Ultra-Clean" hygienic technology, ensuring extended product shelf life and uncompromising safety. Key Performance Capabilities - High-Speed Output: Delivers high-volume production capacities reaching up to approximately 12,000 cups per hour (depending on container dimensions and product viscosity). - Multi-Lane Linear Efficiency: Utilizes a space-saving, index-motion linear conveyor system for continuous, stable container handling. - Precise Multi-Component Dosing: Configured to accurately portion multi-layer products, making it ideal for puddings with toppings, yogurts, and layered desserts. Advanced Hygiene & Ultra-Clean Standards - Contamination Control: Equipped with integrated sterile air and containment enclosures to safeguard open product zones. - Container Sterilization: Employs specialized sterilization modules (such as steam, UV, or chemical sanitization) to treat cups and lidding foil prior to filling. - CIP/SIP Ready: Designed for seamless integration into Clean-in-Place and Sterilize-in-Place plant loops to minimize changeover downtime. * Station 1: Cup station Station 2: For level control and for double or missing cup Station 3: H2O2 disinfection station for cups * Station 4: Filling station Rcsdpezqtkzofx Adqof Station 5: Aluminum lid H2O2 disinfection station * Station 6: Thermal sealing station * Station 7: Expiration date print station * Station 8: Integrated gripper

Condition: used, This listing is for the Transmed Sahara 111 Maxitherm Blood Warmer. The unit is in full working condition and ready for immediate use. High-performance dry-heating system designed for safe warming of blood products, plasma, and infusion solutions while reducing contamination risks in sterile clinical and laboratory environments. Transparency Report and Technical Audit: Rodpfoy R U R Sjx Adqocf • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory. • Source Pedigree: Biotech / Research Facility • Condition: Direct-from-Bench (Decontaminated/Original) • Integrity: 100% Original Parts (Non-Refurbished)

Condition: used, This listing is for the CAS Biomat 2 Microbiological Safety Cabinet + Formalin Vaporiser Rcjdpfxsyvhn Is Adqof The unit is in full working condition and is ready for immediate use The CAS Biomat 2 (manufactured by Contained Air Solutions) is a high-performance Class 2 Microbiological Safety Cabinet designed to provide a sterile environment for both the user and the sample. It is ideally suited for laboratories working with biological agents up to Biosafety Level 3. Key Features & Functionality: Triple Protection: Utilises a sophisticated airflow system (inflow and downflow) to protect the operator from airborne hazards, ensure product sterility via HEPA-filtered laminar air, and safeguard the environment by filtering exhaust air. Certified Safety: Fully compliant with BS EN 12469:2000 standards, ensuring it meets rigorous European safety requirements for biological workstations. Advanced Filtration: Equipped with high-efficiency H14 HEPA filters to create an ISO Class 5 clean environment. User-Friendly Control: Features an intuitive control panel for managing work area lighting, gas valves, and decontamination cycles. Integrated Decontamination: Includes built-in functionality for UV sterilisation and formalin fumigation, with some models featuring real-time status monitoring and VHP (Vaporised Hydrogen Peroxide) ports for thorough cleaning. Practical Design: Often includes internal electrical sockets for equipment like balances or stirrers, pipette holders, and energy-efficient LED lighting.

Year of construction: 2014, condition: used, This listing is for a 3M Zeta Plus 16EZA Encapsulated System Holder The unit is in excellent working condition and is ready for immediate release. The 3M Encapsulated System Holder is engineered to support Zeta Plus depth filtration and related downstream purification processes with optimal ergonomics, hygiene, and operational efficiency. It is specifically designed for biopharmaceutical and biotechnology applications where sterile, high-throughput filtration is required. This system holder accommodates encapsulated filter capsules—eliminating the need for a stainless-steel housing—and offers a pivoting, ergonomic frame that enhances operator safety and eases filter change-outs. Key Features Rcedpfjxl Dy Nex Adqof Pivoting Holder Design – The housing pivots between horizontal (waist-height) for loading/unloading and vertical for filtration mode, reducing operator strain and minimizing fluid spills during replacement. Vertical Flow Path Retained – Preserves the proven vertical flow design ideal for depth filtration with 3M Zeta Plus filters and compatibility with 3M polisher or chromatographic clarifiers. Torque-Limiter Sealing – Built-in torque limiter ensures the capsule shell is properly sealed before operation, protecting against leaks or misassembly. Encapsulated Shell Architecture – Eliminates the need for an external stainless-steel cartridge housing, thereby reducing facility clean‑in‑place (CIP) or validation overhead. Shell Options – Offers translucent polycarbonate shells for visual liquid level monitoring or polyphenylene oxide shells capable of sterilization and sanitization. Multiple Flow Configurations Supported – Enables Bottom-In / Bottom-Out and Top-In / Bottom-Out modes to optimize media usage and filter performance. Scalable Modules – Available in pilot and full-production configurations, facilitating scale‑up from lab to manufacturing scale within a unified system design. Technical Specifications Parameter Description Model / Part No. Housing 16EZA1 Flow Path Vertical flow design, compatible with multiple flow directions Shell Materials Polycarbonate or polyphenylene oxide options (sterilizable) Holder Orientation Pivoting between horizontal (load/unload) & vertical (operational) Sealing Mechanism Torque‑limiter style sealing indicator Operational Scale Supports systems from small pilot scale up to production scale (0.5 L to >2,500 L) Filtration Compatibility 3M Zeta Plus depth filters, 3M Polisher ST, 3M Emphaze AEX Hybrid Purifier, 3M Harvest RC, etc. Footprint Compact vertical footprint; reduced spatial demand in filtration suites Applications Clarification of mammalian cell cultures prior to downstream purification Protection of downstream membranes and chromatography resins via depth filtration Clarification of bacterial, yeast, or insect cell lysates Removal of host cell proteins (HCP), DNA, endotoxins, and particulates Pre‑polishing or polishing after capture chromatography Viral clearance modes in downstream workflows Benefits & Value Proposition Enhanced Ergonomics & Safety – The pivoting design reduces the need to lift used capsules overhead, lowering risk of spills and operator fatigue. Lower Validation Burden – Because the system is fully encapsulated, no external housing cleaning or validation is needed in the customer’s site. Operational Versatility – Flexibility in shell types, flow configurations, and scale continuity from pilot to production. Visual Process Monitoring – Translucent shell...

Condition: ready for operation (used), functionality: fully functional, Steris VHP 1000ED Biodecontamination Unit APPLICATION The STERIS VHP® 1000ED Biodecontamination Unit is designed for mobile biodecontamination1 of clean, dry, sealed enclosures2 such as isolators, chambers, and small rooms using STERIS's VHP process technology, featuring Vaprox® Hydrogen Peroxide Sterilant DESCRIPTION With its mobile design and multi-purpose features, the VHP® 1000ED is one of the most versatile pharmaceutical grade Biodecontamination Units on the market today. The Biodecontamination Unit uses STERIS patented VHP process technology. The process uses hydrogen peroxide vapor as a broad spectrum antimicrobial without condensation of active ingredient onto surfaces. This non condensation feature provides additional benefit of a wide range of material compatibility. The VHP® 1000ED Biodecontamination Unit features easy operation with an easy to use operator interface and other key built-in design features like dehumidification, pressure control, Vaprox cartridge interface and aeration module for an All-In-One unit. Once the Customer cycle is selected, the control system automatically completes the desired biodecontamination cycle. Additionally, the VHP® 1000ED Biodecontamination Unit offers an impact printer for hard copy of the cycle data as well as a USB port for electronic Rjdpfx Adewqz Dloqjcf biodecontamination cycle capture. The unit includes a connection kit with four (4) Banjo 1.25" couplings and 25 ft. (7.6 m) of tubing for connecting to enclosures or rooms Good working condition. Please check out our other listings as well.