Used Standard Steel Overhead Door for sale (35,862)

Condition: used, mileage: 565,222 km, power: 350 kW (475.87 HP), first registration: 01/2020, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2026, brakes: retarder, color: beige, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Mercedes-Benz 1848 LS Actros Fedpfx Asx Axn Nefnepb First registration: 01/2020 * GigaSpace L-cab * Leaf/air suspension * Wheelbase: 3,700 mm * Front axle tires approx. 50% * Rear axle tires approx. 50% * 2 x bunk beds * Refrigerator box * Retarder * German vehicle Special equipment: Axle load measuring device, front axle load 8.0 t, work lights, audio system: digital radio DAB / DAB+, Equipment packages: Driving, Economy, Climate, Comfort, Media, Safety, Visibility, Storage, air horn, 24V / 100A electric pre-installation in cab, Assistance system: Turn Assist, Assistance system: Active Drive Assist, Cab: Extra-Line interior, Cab: Style-Line interior, Cab: air suspension, Cab: shaving mirror, Cab: smoke detector, 12-speed gearbox - type: G 281-12, integral rear, folding table in parapet, comfort telephony (Bluetooth) with induction charging cradle, wide upper comfort bed, three-piece mudguards, fuel tank: combined aluminum tank - 720 l diesel + 75 l urea solution (AdBlue), additional fuel tank 330 l aluminum, right side, side deflectors, mounting plate / 40 mm saddle plate for 20 t fifth wheel, reinforced engine brake, PremiumComfort upper mattress, rear frame overhang 1050 mm, smoker package, tire pressure monitoring system, retarder, low-maintenance fifth wheel coupling, greased locking, additional remote control keys (2), fleet management system interface, drawers under parapet, seat covers/upholstery: passenger seat velour, driver's seat velour, Cab seats: driver's seat with massage function, Cab seats: comfort driver's suspension seat, sound system, exterior storage flap left, additional 12V / 15A socket in passenger footwell, preparation / switch for lift axle on trailer/semi-trailer, preparation for four surround cameras (displayed on dashboard monitor), sleeping cabin curtain Additional equipment: Emission standard EURO 6, axle configuration: 4x2, Actros 5, Actros L-cab, heated approach/front mirrors, trailer electrical and brake connections (low), 24V / 15-pin trailer socket, entry step driver's side left, exhaust to right outside, Powertrain 2 package, exterior mirror camera (MirrorCam), batteries side-by-side, rear axle differential lock, torque increase in 12th gear, compressed air outlet in cab, steel air reservoir, air unit with condensate monitoring, medium air unit, automatic driving light activation (light sensor), assistance system: Attention Assist (fatigue detection sensor), assistance system: autonomous emergency braking (Active Brake Assist 5), assistance system: Lane Keeping Assist, Cab: fixed entry, Cab: chrome interior package, Cab: hydraulic tilting, Cab: L GigaSpace, 2.50 m, flat floor, vehicle contour lights LED, suspension: leaf/air, electric windows, vehicle without rear window, 100A regulated alternator, speed limiter, urea tank (AdBlue): 60 l, rear axle with active lubrication (unregulated), rear axle ring gear 440, body/chassis: tractor unit, lower comfort bed, comfort central locking, electronically controlled steering pump, 2-stage air compressor, heated air dryer, engine 12.8 l - 350 kW R6 diesel (OM 471), engine variant OM 471, application type: local distribution.

Condition: used, mileage: 623,000 km, power: 323 kW (439.16 HP), first registration: 05/2012, axle configuration: 2 axles, emission class: euro5, Year of construction: 2012, Equipment: air conditioning, Renault Premium 440 DXi 4x2 High Roof - Euro 5 - 623,000 km, service record - Privilege - Air conditioning - 1 bed - 1 fuel tank - Spare wheel Fedpfx Afsx Smgzsnjpb - Belgian registration - Net price for export

Condition: used, machine/vehicle number: WMAT34ZZZ1M320324, mileage: 372,000 km, power: 302 kW (410.61 HP), first registration: 10/2001, fuel type: diesel, tire size: 13R22.5, tire condition: 40 %, axle configuration: 4x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 2001, = Additional options and accessories = - Hydraulics - Leaf spring - PTO Fodex Rv Urepfx Afnspb = More information = Tyre size: 13R22.5 Tyre profile: 40% Suspension: leaf suspension Front axle: Steering Rear axle: Double wheels

Condition: excellent (used), mileage: 77,200 km, power: 180 kW (244.73 HP), first registration: 05/1989, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, fuel tank capacity: 400 l, color: yellow, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro1, suspension: steel, Year of construction: 1989, Equipment: differential lock, = Additional Options and Accessories = - 8-speed manual gearbox - 400 liter diesel tank - Heated mirrors - Full leaf spring suspension - Differential lock - Differential lock - Speed limiter - Main battery switch - Hydraulic system - Hub reduction - Radio/CD player - Power take-off (PTO) - Power take-off (PTO) = Notes = HEAVY DUTY M.A.N. 26.240DFT DAY CAB 6x4 FULL STEEL SUSPENSION TRACTOR UNIT, HUB REDUCTION AXLES & ZF MANUAL GEARBOX!! 240HP, EURO 1, 6-CYLINDER ENGINE (NO ELECTRONICS, MECHANICAL PUMP & INJECTORS)!! ZF MANUAL GEARBOX!! FULL STEEL SUSPENSION!! REDUCTION AXLES!! P.T.O.!! HYDRAULIC KIT!! ETC.!! TRUCK IS IN GOOD DRIVING CONDITION, READY FOR HEAVY TRANSPORT JOBS!! MORE M.A.N. 4x2 / 6x2 / 6x4 / 8x4 (CONSTRUCTION) TRUCKS IN STOCK FOR SALE!! (>75 TRUCKS/TRAILERS AVAILABLE)!! PLEASE CHECK OUR WEBSITE; SHIPPING, STACKING, TRANSPORT OR LOADING? NO PROBLEM FOR US – WE ARE A “ONE STOP SHOP” COMPANY!! YOU CAN ALSO WATCH OUR COMPANY VIDEO ON YOUTUBE FOR A FIRST IMPRESSION!! ( ) ENGEL TRUCKS: “YOUR GLOBAL TRADING PARTNER” = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 11,967 cc Transmission Transmission: ZF 8-speed manual gearbox Axle configuration Brakes: Drum brakes Suspension: Leaf suspension Front axle: Tire size: 315/80R22.5; Max. axle load: 7,500 kg; Steering; Left tire tread: 20%; Right tire tread: 20% Rear axle 1: Tire size: 11R20; Dual tires; Differential lock; Max. axle load: 13,000 kg; Inner left tire tread: 20%; Outer left tire tread: 20%; Inner right tire tread: 20%; Outer right tire tread: 20%; Reduction: Outboard planetary axles Fsdpfxex N Sw Ts Afnspb Rear axle 2: Tire size: 11R20; Dual tires; Differential lock; Max. axle load: 13,000 kg; Inner left tire tread: 20%; Outer left tire tread: 20%; Inner right tire tread: 20%; Outer right tire tread: 20%; Reduction: Outboard planetary axles Weights Curb weight: 9,000 kg Payload: 17,000 kg Gross vehicle weight: 26,000 kg Functionality Cargo space volume: 400 l Body brand: ZF Loading platform height: 130 cm Condition Technical condition: very good Visual condition: good Further information Please contact the Sales Department or Erik Engel for more information.

Condition: good (used), The scope of delivery includes: 01x steel door, used Design: DIN - Right Material color: grey Total height: 2,210 mm Total width incl. frame: 750 mm Frame profile: RR 50x50 mm Total door height: 2,110 mm Total width door: 620 mm Door frame profile: RR 25x25 mm Mesh width: 105x22 mm Passage width: 645 mm Footplate dimensions: 140x50 mm Weight per unit: 25.76 kg Remark: Lever handle set and lock, as well as key are not included in the scope of delivery. Fedpfxstp Hkas Afnjpb Currently available from stock: 25 pcs. Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, overall weight: 260 kg, total length: 1,140 mm, total width: 450 mm, total height: 525 mm, volume flow: 14.5 m³/h, final pressure: 2.2 bar, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,440 rpm, protection type (IP code): IP56, 2 pieces of horizontal, axially split volute casing pumps in process design, with single-suction, single-stage radial impeller Manufacturer: KSB Model: CPKN-C3.1 040-250 Year of manufacture: 2009 Shaft seal: Double-acting Burgmann mechanical seal with flushing water connection and flow meter Impeller diameter: 260 mm Pump speed: 1440 rpm Fpodexp Eqkepfx Afnjb The nameplate shows the latest operating parameters, NOT the pump’s best efficiency point! Best efficiency point according to pump curve: Flow rate: 14.5 m³/hour Head: 22 meters (2.2 bar) Shaft power: 1.85 kW Efficiency: 46.1 % NPSH: 1 m Operating point according to last application: Flow rate: 6.0 m³/h Head: 24.0 meters Shaft power: 1.36 kW Efficiency: 30 % NPSH: 0.8 m Materials: Volute casing: Noridur 1.4593 Casing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Other wetted parts: 1.4517 Electric motor: 4.0 kW Energy efficiency: IE1 Voltage: 400/690 Volts Speed: 1440 rpm The material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and conveying - Flue gas desulphurization plants - Acidic, chloride-containing wash slurries - Acidic process waters - Wastewater treatment plants/sewage treatment - Offshore and marine engineering

Condition: used, empty load weight: 7,000 kg, maximum load weight: 31,000 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 07/2017, next inspection (TÜV): 09/2026, loading space length: 13,600 mm, loading space width: 2,470 mm, loading space height: 2,700 mm, loading space volume: 90 m³, tire size: 385/65 R22,5, Year of construction: 2017, Equipment: ABS, Tare weight: 7,000 kg, Gross Vehicle Weight (GVW): 38,000 kg, Loading area (L W H): 13,600 mm x 2,470 mm x 2,700 mm. Tyre size: 385/65 R22.5, Loading area volume: 90 m³, 1st axle: , 2nd axle: , 3rd axle: , Rear underrun guard, Front lift axle, Electronic Brake System (EBS), Fire extinguisher holder, Toolbox, Roller shutter door, Hubodometer, 1x15 and 2x7-pin connectors, Antispray system, Customs sealing capability, Stowage box. Please find an overview of all vehicles available on our website. Finance required? We offer individual financing solutions, full service contracts and telematics services. We would be glad to advise you personally. Fsdpfovrwi Isx Afnepb

Condition: used, Year of construction: 1998, machine/vehicle number: PS1, KONE overhead crane system with track dimensions approx. 5 x 6 m (6 m bridge) Payload / Lifting capacity 500 KG - 0.5 tons Technical specifications of the system: The system is delivered complete: Rails, rail connectors, trolleys, end plates, brackets/hangers, etc. (Travel drives are disconnected, presumed defective – manual operation is possible without any issues!) Including 500 kg chain hoist – lifting height approx. 4.5 m Crane is disassembled and immediately available Fpjdpfxexcg Nbe Afnob Used condition, see photos Item location: 75053 Gondelsheim Shipping via freight forwarder or collection by appointment only Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems with payloads of 125 KG – 1600 KG are also available. Please inquire about your required crane track with load capacity and dimensions – no obligation.

Condition: used, mileage: 252,375 km, power: 315 kW (428.28 HP), first registration: 01/2017, fuel type: diesel, empty load weight: 9,495 kg, maximum load weight: 16,505 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,300 mm, next inspection (TÜV): 10/2024, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, differential lock, onboard computer, power assisted steering, traction control, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, Mtl. house, swing seat, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, tilt hydraulics, differential lock, rotating beacon, leaf suspension, aluminum tank, roof hatch, environmental badge green Wheelbase: 3300 mm Full Steel Suspension in the front and back! Fsdpfxevhmz Ee Afnspb 7.5t front axle, rear axle disc wheel 300 planetary 13.4t, electronic brake system with ABS and ASR, ABS can be switched off, disc brakes on front and rear axle, front axle stabilizer, smoker package, parameterizable special module (PSM), comfort locking system, Power drive program, Mercedes PowerShift 3, tank capacity: 290l, protective plate under bumper, transmission oil cooling, rear engine output, b, flange 100 650Nm. ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Year of construction: 1987, condition: excellent (used), 1 piece chemical standard centrifugal pump with very few operating hours. Pump is suitable for acid condensate and aggressive acids. Also suitable for salt water! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Delivery volume: 250m³/h Head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of construction: 1987 Pump speed of 1480 rpm is also possible! Delivery rate approx. at 1480 rpm (information without guarantee) Delivery rate: 430m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and piping in stainless steel are also available The material 1.4593 Noridur is very well suited for - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Fpsdpfsh S Nz Sex Afnob Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, machine/vehicle number: WIL190, Demag EEPOS Gis Hall Crane Portal Crane Bridge Crane incl. Steel Structure + Floor Control Steel structure approx. 15.35 x 7.2 m with EEPOS ALU crane runway, equipped with two bridges, each with a payload of 350 kg Payload/lifting capacity of the crane: 2 x 350 kg Incl. 1 x Gis chain hoist 500 kg + 1 Demag DC chain hoist NL 250 kg, year 2023! Technical details of the system: - Crane runway/steel construction made from HEA180 beams - Length, outer edge of steel structure: approx. 15.35 m - Total width, outer edge (steel structure): 7.2 m - Inner edge of steel structure: 6.83 m - Total height of steel structure/crane: approx. 5.03 m - Column height: approx. 5.03 m with base plate - Bottom edge of purlin: 4.83 m - Top edge of bridge: approx. 4.32 m - Bottom edge of bridge: approx. 4.02 m - Hook height: approx. 3.65 m - Track gauge: approx. 5.5 m - Rail length: approx. 17 + 19 m - Bridge length: approx. 6.4 m Column spacing: see drawing (6.85 m + 8.5 m) System is delivered complete: - Complete steel structure with columns - EEPOS aluminium crane runway incl. 2 chain hoists (profile type XL+V) Crane is dismantled and immediately available Location: 75053 Gondelsheim Very good condition, see photos Fpjdpfx Afexcg Dlonsb Shipping via freight forwarder or collection only by appointment

Year of construction: 2015, condition: excellent (used), functionality: fully functional, total height: 480 mm, 2 pieces Horizontal, cross-split volute casing pump in process design, with radial impeller, single-entry, single-stage, Manufacturer: KSB Model: MCPK 40-25-160 Year of manufacture: 2015 Shaft seal: Double-acting Burgmann mechanical seal with sealing water connection and flow meter Impeller diameter: 169 mm Pump speed: 2950 rpm !!! ATTENTION !!! Operating parameters are specified on the type plate. Not the actual flow rate at the best point !!!! I have stored 2 characteristic curves as a photo. Photo 11: Best point Photo 12: Operating parameters from last application Flow rate: 6.9 m³/h Delivery head: 33.0 meters Shaft power: 1.73 kW Efficiency: 35.87 % NPSH: 2.17 Data operating point for last application approx. Flow rate: 2.2 m³/h Delivery head: 37.0 meters Shaft power: 1.27 kW Efficiency: 18.07 % NPSH: 1.99 Materials: Volute casing: Noridur 1.4593 Housing cover: Noridur 1.4593 Shaft: C 45+N Impeller: Noridur 1.4593 Fpodpfx Afjfyn Rpsnob Other parts in contact with the medium: 1.4517 Electric motor: 5.5 kW Energy efficiency. IE 2 Voltage: 400/ 690 Volt Speed: 2950 rpm The material 1.4593 Noridur is very well suited for: - Chemical and process engineering industry - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry Bmg9kmu7ug - Coking plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and extraction - Flue gas desulphurization plants - Acidic, chloride-containing washing suspensions - Acidic process water - Waste water treatment/sewage treatment plants - Offshore and marine technology

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/Lifting Capacity: 2.5t - 2,500kg Technical Data of the System: Fpsdpfxsw Ixz Us Afnjb Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Hook height: approx. 4.3m Crane gauge: approx. 10.8m Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. The item is located at 75053 Gondelsheim Very good condition, see pictures Shipping by freight carrier or self-collection by appointment only.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, machine/vehicle number: 10000987990, total height: 5,300 mm, total length: 30,000 mm, total width: 8,900 mm, load capacity: 3,200 kg, lifting height: 4,450 mm, Up for auction is a Konecranes overhead crane with 2 bridges, each offering a lifting capacity of 3.2 t. TECHNICAL DETAILS Lifting capacity: 3,200 kg Span: 8,900 mm Lifting height: 4.45 m Hoisting speed: 3.9 m/min (ASR 1.2 m/min) Trolley travel speed: 20 m/min, infinitely variable Crane travel speed: 40 m/min, infinitely variable MACHINE DETAILS Number of bridges: 2 Number of trolleys: 2 Dimensions & Weight Dimensions (L x W x H): 30,000 x 8,900 x 5,300 mm Trolley weight: 230 kg Crane total weight without trolley: 1,300 kg Electrical Data Operating/Control voltage: 400 V / 48 V, 50 Hz Rated power: 3.0 kW Fpedpsx Nvrzefx Afnjb EQUIPMENT Runways Radio remote control Conductor rails Overload protection Load spectrum memory Signal horn Pre- and limit switches for trolley and crane travel (slow/stop) Guide rollers to reduce skewing forces Buffer extension to compensate for guide rollers

Condition: used, Safe Line metal detector Equipped with stainless steel reject flap Fully stainless steel and easy to clean by means of hatches Fedpfx Aex Nzzzofnspb Metal detection diameter: 200 mm Total installation height: 1200 mm See our other listings VMA Wekerom

Condition: used, Double-Girder Overhead Travelling Crane, Bridge Crane KONECRANES Type XLD 32t Serial No. 18 / 4363310 Year of manufacture: 2002 Load capacity: 32 tons Span: 5750 mm Lifting height: max. 12.5 meters Girder height: 560 mm (2 bridge crane girders) Travel speed (crane): 20 m/min, infinitely variable via frequency inverter Trolley travel speed: 16 m/min, stepless via frequency inverter Fodpfx Afox Edq Ijnepb Hoist with double-girder trolley KONECRANES Type XL516N40HDC424B0EE (XL500) Serial No. (hoist): C00204, Year: 2002 Crane classification: DIN 15011 (FEM 1.001) "M4"/"1Am" Rated load: 32 tons Hook path: max. 12.5 meters Main hoist speed: 2.5 m/min Fine hoist speed: 0.42 m/min Trolley gauge: 2400 mm - Trolley with double-girder drive - Equipped with REMOX radio remote control (frequency 434.675 MHz) - Double load hook (twin hook) - Complete cable drag chain for power supply - Electrical control cabinet located on the bridge - Very low operating hours Main hoist motor power: 18 kW Auxiliary hoist motor power: 3 kW Power supply: 400 Volts, 50 Hz Transport dimensions (L x W x H): 6000 x 2450 x 2800 mm Total weight: approx. 5000 kg In very good condition

Year of construction: 2006, condition: excellent (used), machine/vehicle number: MBUT133-767, Steel single girder suspension crane Bridge crane Crane runway Indoor crane Gantry crane Fodpfsty Sx Rjx Afnspb width approx. 8,3m - length approx. 11m, payload 500KG Track width can be changed, end beams (125cm) are bolted with 8 bolts. incl. approx. 2x 11m running rails IPE 300 (were cut in the middle) incl. conductor rail for the power supply by means of the crane track's current grinder The width of the trolleys can also be adjusted to a different girder dimension. Incl. complete control system, floor operation by means of control bottle The crane can be moved electrically in all 3 axes Lifting height/hook path approx. 4m Connection to 400V 16A, year of construction approx. 2006 Very good condition, equipment was only used for maintenance - hardly used Shipping by forwarding agent, collection preferred Location 75053 Gondelsheim Please ask for shipping prices by postal code, we will send you an immediate and non-binding offer!

Condition: good (used), Year of construction: 2019, machine/vehicle number: 110-044731, Offer 25160 Technical data: - Load capacity: 3200 kg - Track gauge approx.: 9090 mm - Clearance height approx.: 360 mm - Beam length approx.: 2400 mm - Wheelbase: 1900 mm - Hook travel approx.: 6000 mm - Reeving: 2 / 1 Fedpfow S D Emex Afnspb - Speeds: - Trolley travel approx.: 20 m/min + 5 m/min - Hoisting approx.: 5 m/min + 0.8 m/min - Crane travel approx.: 20 m/min + 5 m/min - Operation via radio remote control - Crane total weight approx.: 1600 kg

Condition: used, Load capacity: 990 kg Beam length: 7880 mm Fedpfsvgw Ruex Afnspb Effective length of the beam: 7480 mm Lifting core: 5700 mm Without sidecar!

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston, tilting cylinder -Manufacturer: GSL (German Standard Lift), hydraulic cylinder, stroke 270 mm -Type designation: E030ZM60279 T24 -Piston rod: Ø 30 mm -Hole: Ø 20 mm, see photos Fedjizc Azjpfx Afnepb -Number: 2 cylinders available -Price: per piece -Dimensions: 470/50/H80 mm -Weight: 4 kg/pc.

Condition: good (used), Control unit, control element, interface, drive control, drive current control, high-performance pulse control, pulse control -Manufacturer: GSL (German Standard Lift), high-performance impulse control for driving work platforms -Type: 1204-406 Fsdpfxoiy R Udj Afnepb -Voltage: 36-48 V -Dimensions: 195/145/H75 mm -Weight: 2 kg

Condition: good (used), hydraulic motor, oil motor, hydraulic pump -Manufacturer: GSL (German Standard Lift), Hydraulic pump for driving work platforms -Type: 730-0080-130-002 -Drive shaft: Ø 25 x 40 mm Fpodpfjlntpijx Afneb -universally applicable -Number: 1x engine available -Price: per piece -Dimensions: 240/135/H130 mm -Weight: 13.2 kg/piece

Condition: good (used), Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Cylinder: Ø 63 mm -Piston rod: Ø 32 mm -Pipe outer diameter: mm -Stroke: 170 mm Fpedpfx Afjb A H Sxensb -Total length when retracted: 330 mm -Hole diameter: Ø 30 mm -Ideal for building a hydraulic press -Quantity: 10 available -Price: per piece -Weight: 13 kg/piece

Condition: good (used), Hydraulic motor, oil motor, hydraulic pump -Hydraulic motor for driving work platforms from GSL (German Standard Lift) -Drive shaft: Ø 22 mm toothed -universally applicable Fedob A H Nbjpfx Afnjpb -Number: 3x motors available -Price: per piece -Dimensions: 235/125 mm -Weight: 15 kg/piece

Condition: good (used), Shock absorber, gas spring, shock absorber, start-up damper, impact damper Fedpfxoi Exqbj Afnopb -Manufacturer: GSL (German Standard Lift), Gas spring, Gas pressure spring, 2 pieces -Type: 250N 11/14287251554/00101 -Piston: Ø 28 mm -Piston rod: Ø 14 mm, length 750 mm -Socket: M10 x 1.5 -Price/Fee: complete -Dimensions: Ø 28 x 1585 mm -Weight: 2.1 kg/piece