Used Steel Tubing for sale (19,019)

Year of construction: 2021, condition: used, Tube manufacturing line Manufacturer: Bazhou Wanxin Industrial and Trading Tube manufacturing line consisting of: Double-station unwinding device Function: Unwinds the coil passively Design: 2-station design with 180-degree rotation, manual expansion Advantages: Fast loading, simple and convenient operation Hydraulic shear and butt welding machine Function: Cuts off the front and rear ends, centers the strip, and welds the strip back together Design: Manual hydraulic shear with cantilever, front and rear pressure rollers, front and rear centering rollers, welding device Cutting method: hydraulic shear Press material method: double-cylinder press Welding method: manual welding Strip storage device Function: To ensure continuous production of the welded tube, a storage unit must be installed after the shear and butt welding platform so that the storage unit can continuously feed the strips while the strip steel material is prepared for stacking, unwinding, butt cutting, and welding. Design: Frame type, with moving and fixed frames (including feeding device) Feeding speed: max. 120 m/min Storage speed: max. 200 m/min Length of stored strips: 200 - 400 m Pinch roller motor: AC 11 kW Forming and sizing machine Working height: +850 mm Power: AC/DC motor: 160 kW, 1000 - 2000 rpm Reducer: Gear hardening Arrangement: Passive five-roll straightening machine, vertical rolls for feeding material, forming through 7 horizontal roll stands and 8 vertical roll stands, guiding, pressing, deburring, cooling, and sizing through 6 horizontal roll stands and 5 vertical roll stands, 1 round sizing stand Round sizing stand: 1 set of smoothing device, two sides with 8 rolls each, 4 rolls per side. 30 mm, 40cr, quenching, tempering, and hardening Horizontal roll shaft: 60 mm, bearing at position 55, made of material 40Cr Heat treatment of horizontal roll: surface hardening, HRC 50-55 Bearing guide: forged steel 45# Vertical roll shaft: 40 mm, material 40Cr, quenched, tempered, and hardened Vertical and horizontal rolls - Design: Portal design, opening width: 120 mm, clamping of horizontal roll stand: adjustment via worm gear Material of horizontal and vertical roll stands: welded (aging annealing) Gearbox: Gear: Spiral bevel gear Shaft of pinch roll: 50 mm, 2 rolls for pinching, adjusted via a manual screw rod Guide shaft: 40 mm Deburring knife: 2 pcs., one for working and one as a spare Cooling tank Cold cut-off saw Function: The cold cut-off saw is one of the most important machines in the ERW tube line. It can cut the tubes to the preset length during high-speed production. Type: KK-5-50 Tube diameter: Round tubes 16-63.5 mm and corresponding square and rectangular tubes Length cut: any length between 1 - 6 m Kdodozuz H Sepfx Ah Ejt Material thickness: 0.6-2.5 mm Drive motor: 11 kW servo Yaskawa Feeding motor: 2.9 kW serco Yaskawa Saw motor: 11 kW, AC motor with frequency converter Feeding method: Servo multi-stage speed feed Speed adjustment: max. 110 m/min Clamping force: pneumatic Drag chain Saw blade: 400 mm Saw gearbox model: KK-80 Saw stroke (device length): 3 m Device dimensions: 4500 x 1500 x 1300 mm Conveyor track, table, and packaging machine Function: The formed tubes are automatically removed from the roll.

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Ksdpovlpctjfx Ah Eedt Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: new, Workbench with sheet steel shelf and 10-year manufacturer's guarantee* Made in Germany - Beech multiplex board 750 x 700 x 40 mm, without back board - Base frame made of VK tube 40/40/2 mm - Sheet steel shelf 600 mm deep - Leg elements with plastic adjustment plugs - Surface load with evenly distributed load: 1000 kg - Standard workbench - 750 x 700 x 840 mm L x D x H - Ergo version - 750 x 700 x 900 mm L x D x H Available in 7 different basket colors: - Anthracite gray - Gentian blue - Fire red - Sky blue - Light blue - Light gray - Pure orange - Reseda green - Signal blue - Deep black Kjdpfx Aoubxxqoh Ejdt * 10-year manufacturer's warranty. Wearing part excluded. This item is delivered free kerbside. Delivery time usually 5 working days. Free shipping within DE without islands.

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. Kdodpfx Ahjg N Db Hj Est 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Year of construction: 2021, condition: used, functionality: fully functional, overall weight: 43,000 kg, ZENO Shredder Type ZTLL 3000 x 2500 Ksdpfoyx U N Dsx Ah Eodt For shredding PVC window frames Output approx. 10 t/h with a 50 mm Ø screen perforation Infeed opening: 3000 x 2500 mm Drive: 2 x 132 kW, gearbox with torque cut-off Rotor swing diameter: 750 mm Rotor speed: approx. 80 rpm Rotor design: 4 rows (180 pcs.) of positive cutting plates, 80 x 80 x 45 mm mounted on tool holders Rotor bearings: pedestal bearings Rotor body: armoured (wear protection) Hopper water spray: flat spray nozzles, 3 l/min each at 3 bar Screen design: solid screen basket, reinforced with ribs, quick-change screen system Counter-blades: adjustable cutting gap, fold-away Side walls in rotor area: replaceable, material Hardox Hopper: 1300 mm high, flared on all four sides, double-walled and concrete-filled, no cover Machine weight: approx. 43,000 kg Control cabinet (loose, for machine control, incl. soft start), with touch panel Additional features: - Solid steel tube with screwed-in tool holders for mounting of cutting plates. - Cutting plates can be changed easily. - Steel tube mounted on both sides in heavy-duty spherical roller bearings in pedestal housings. - Drive shaft made from high-quality steel, bolted to the rotor body. - Coupling between drive shaft and gearbox via shrink disc for improved load transmission. - Hydraulic feed. - Load-dependent control: drive motors are evenly utilized. - Reversing operation. - Internal pusher guide with permanently lubricated bearings. - Hydraulic unit with increased throughput due to idle compensation. - Quick-change screen system / hydraulically extendable and lockable screen. - Hydraulic locking system on the screen assembly. - The compact machine design ensures low power consumption (with high throughput) and quiet operation. - Drive via soft-start electronics. - Cutting gap adjustable by setting the counter-blade. - Counter-blade can be folded away hydraulically in the event of overload, with mechanical locking for emergency operation. - The entire machine complies with the EU Machinery Directive and bears the CE mark. Please contact us for further information. Price on request!

Condition: used, Year of construction: 2010, functionality: fully functional, - Brand: Bongard - Model: Cervap 600 / 9 doors - Technology: steam tube - Energy: gas or fuel oil - Configuration: 3 decks - Number of lanes: 3 lanes - Lane width: 600 mm Kdjdpfxjy Duyaj Ah Est - Total number of doors: 9 - Usable height per deck: 170 mm - Application: bakery - Application: pastry - Application: viennoiserie - Baking by conduction - Baking by radiation - Annular steam tubes - Refractory stainless steel combustion chamber - Steam generator per deck - Standard control: Ergocom - This is a professional bakery oven from the French brand Bongard. It is a model from the Cervap range.

Condition: good (used), functionality: fully functional, Used L + Z lathe with 3-axis digital readout Manufacturer: WEILER Type: Condor 81 B Machine. No.: 87596 Year of manufacture: approx. 1987 Center distance: 750 mm Turning diameter over bed: Ø 330 mm Center height above bed: 165 mm Turning diameter over support: Ø 180 mm Center height above support: 90 mm Spindle bore: Ø 40 mm Tailstock inner taper: MK 3 Pinol adjustment: 110 mm Spindle speed: 45 - 2800 rpm. (16 steps + 2 motor speeds) Feed range: 0.016 - 0.50 mm/rev Drive power: 1.6 + 3.2 kW (drive motor stage 1+2) Mains connection: 400 Volt, 50 Hz Connected load: 32 kW Control voltage: 42 Volt Equipment + accessories: - 3-axis digital readout from Heidenhain type VRZ 750 - Quick clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix size B quick-change steel holder - LED work light - Bed stop - Automatic longitudinal & face feeds - Electro-mechanical spindle brake switchable - 2x emergency stop - Electrical feed key query (via sleeve with button) - Coolant tank with pump in the machine base Kodpfx Ahevadqzj Eedt - Folding chuck guard - Splash guard - Circuit diagram - Adjustable machine feet Space requirement: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1100 kg This new generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated on site under power. All information without guarantee. Subject to prior sale.

Condition: good (used), GIC Gainsborough Engineering model - VFB2000. Manufacturer - Gainsborough Engineering Ltd GIC Gainsborough Engineering VFB2000 vertical form-fill-seal (VFFS) bagging machine, designed for automated weighing/bagging and packing of food products and other free-flowing products. Kodpszzzfujfx Ah Esdt Specification: Manufacturer: Gainsborough Engineering Ltd Brand: GIC Model: VFB2000 Type: Vertical Form-Fill-Seal (VFFS) bagging machine Sealing bars: 290 mm horizontal × 320 mm vertical Film reel width: 620 mm Current film width: 280 mm Forming tube: 80 mm diameter Suitable for integration with weighing/feed systems Stainless steel/food-processing construction Designed for continuous automatic bag forming, filling and sealing

Condition: excellent (used), Güntner GVH 102B/2x2N air-cooled condenser Patented Güntner support tube design All fans in ISO F configuration Performance data in R404A Condenser block: The refrigerant-carrying core tubes are relieved of stress by the patented support tube design. This results in increased leak resistance. Copper pipe Ø 12 mm, 50 x 25 mm offset Aluminum fins, 2.4 mm spacing Copper distribution and collection pipes and pipe connections Permissible pressure: ps=28 bar Permissible temperature: ts=100°C Fans: Low-noise axial fans with maintenance-free motors with IP54 protection, three-phase 400/3/50, according to DIN 40050 Design: Insulation class F Permissible conveying medium temperature -30 to +55°C All three-phase fans are generally available with 2 speeds (Δ-Y switching) and speed-controlled via Güntner control units Case: Galvanized and painted sheet steel, RAL 7032 Rated power: 369.5 kW Air volume flow: 93,800 m³/h Kedpfx Aoq A Tunoh Eodt Number of Fans: 2 x 2 Motor P = 2200W I = 4.20A (400V) n = 650 min Rated voltage: 400V Financing through our bank is also possible. komplett-konzept.leasingo.de Other items in different sizes – new and used – can be found in our shop! International shipping costs on request!

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Process Systems LEP13.2 KK6771 Package 11 System type: Temperature Control Unit – LEP13.2 AS Storage Project: Ammonium Sulfate Supply and Disposal Unit: KK6771 Year of manufacture: 2020 Serial number: 1003622 Equipment number: 20022749 LEP13.2 – AS Storage Temperature Control Unit TECHNICAL DATA Product: LEP13.2 – AS Storage Temperature Control Unit Medium: Ammonium sulfate Design: Pharmaceutical / GMP Product-contact materials: 1.4435 / 1.4301 stainless steel Dimensions (L x W x H): approx. 1900 x 1545 x 1580 mm Control air supply: 6 bar (AIP) Tested pressure range: up to approx. 3–4 bar (Leak test documented) MAIN COMPONENTS 2x centrifugal pumps Horizontal shell-and-tube heat exchanger Electric flow heater Expansion vessel Pressure and temperature measurement points Pneumatic control valves Manual ball valves (GEMÜ) Stainless steel control cabinet / terminal box Fully insulated piping APPLICATION The temperature control unit is used for precise temperature regulation in the ammonium sulfate storage system of a pharmaceutical production facility. Suitable for: - Pharmaceutical production environments - GMP-regulated systems - Media temperature control systems - Turn-over package integration DESIGN / CONSTRUCTION - Complete, pre-assembled skid unit - Stainless steel frame construction - Compact design with unobstructed maintenance access - Fully piped and insulated - Clear labeling of all measuring points and fittings - Pharmaceutical-grade execution as per CSL Behring customer specification - P&ID checked - Layout checked - Multiple documented leak tests - Calibrated measuring devices with certificates The system is fully assembled and prepared for seamless integration into existing pharmaceutical installations. CONDITION - As-new / Project system - Year of manufacture: 2020 - FAT completed - Pressure test passed - Complete documentation available COMPREHENSIVE DOCUMENTATION Includes, among others: Kdodpfxsyl I S Ds Ah Ejt - Factory certificates according to EN 10204 - Material lists - EU declarations - Inspection reports - Documentation of installed equipment - I&C documentation - As-built isometrics - User manual - Calibration certificates SPECIAL FEATURES - Project-specific pharmaceutical design - GMP-compliant manufacturing - Complete skid-mounted construction - Compact footprint (approx. 1.9 x 1.5 m) - Maintenance-friendly layout - High-quality piping insulation - Ideal for technical areas close to cleanrooms

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Type: LEP 2.3 – Washing Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003561 Tag No.: MR-INH-VPR61-KK6751 Equipment No.: 20022779 Location: Germany Condition: New, unused, original packaging Technical Data System Type: Washing Solution Temperature Control Unit (Temperature Control Skid) Design: Compact, pre-assembled skid unit in stainless steel frame Frame Material: Stainless steel Insulation: Completely insulated piping and components Pumps: Two circulation pumps with electric motors Stainless steel pump housing Inline design Heat Exchanger: Integrated stainless steel heat exchanger Shell and tube or jacketed tube design Valves: Multiple GEMÜ ball valves Stainless steel valves Pneumatic control valves Safety valves Instrumentation: Pressure transmitter Pressure gauges Temperature measuring points Integrated flow measurement Kodpfxoyl Ib Ee Ah Esdt Electrical: Integrated control cabinet or terminal box Ready-wired for connection Industrial standard components Piping: Stainless steel process pipelines Fully insulated Flange and clamp connections Transport: Forklift- and crane-compatible Heavy-duty stainless steel base frame Application The temperature control unit is designed for controlled temperature regulation of a washing solution in pharmaceutical or chemical processes. Suitable for CIP and washing processes, pharmaceutical production lines, chemical processing plants, as well as temperature-controlled media circuits. Construction Compact, modular skid design Pre-assembled and ready to connect High-quality stainless steel construction Industrial-grade quality components, including GEMÜ valves Service-friendly design Condition New system Never used Original packaging Direct from manufacturer’s project Immediately available FAT and Documentation Status Technical documentation available Project documentation available Drawings available P&ID available Component lists available Operating manual available Special Features Completely insulated process piping High-quality stainless steel construction Premium industrial components Ideal for new projects or as a replacement/redundant unit Immediate integration possible

Condition: new, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, Manufacturer: BRINOX Process Systems Type: LEP 2.3 System Type: Temperature Control Unit for Washing and Elution Solutions Year of Manufacture: 2020 Serial Number: 1003563 Device Number: KK6752 Design: Stainless Steel Skid, Pharmaceutical Construction LEP 2.3 KK6752 Package 7 Technical Data Design: Compact, pre-assembled temperature control unit on a welded stainless steel frame (skid system) Materials: Product-contact: Stainless Steel 1.4435 / 1.4404 Non-product contact: Stainless Steel 1.4301 Piping System: Orbital welding (pharmaceutical grade) Fully welded construction As-built isometric drawing available Pressure Data: Leak test using compressed air Test pressure: 3.37 bar Holding time: 1 hour Result: Leak-free Measurement and Control Technology: Pressure measurement (PIR, PI, PIRC) Temperature measurement (TI, TIRC) Level measurement (limit) Kjdpfx Ahoyl Ipcj Esdt Flow monitoring Position feedback Motor control On/Off pneumatic valves Pressure sensor measuring range: 0–10 bar Electrical Connection: Control air: 6 bar Automation-capable (PLT nodes fully documented) Main Components: 2 process pumps Plate heat exchanger Finned tube heat exchanger Expansion vessel Multiple hygienic control and shut-off valves Integrated instrumentation units Cooling Medium: Chilled brine (supply/return interfaces available) ───── Dimensions / Weight Construction: Compact skid unit Industrial design for cleanroom/technical areas (Transport and installation dimensions as per layout drawing) Application Area Temperature control of: Washing solutions Elution solutions Process media in biopharmaceutical environments Fields of Application: Biotechnology Plasma fractionation GMP production facilities Build / Construction Welded stainless steel frame Low-vibration pump mounting Hygienic piping Full implementation according to P&ID Clear separation between product and non-product areas Service and maintenance access tested Mechanical SAT-IQ test performed Metrological SAT-IQ test performed P&ID diagram check completed Layout drawing check completed Condition Manufactured in 2020 Industrial and pharmaceutical version New, original packaging Pressure tested Sensors calibrated FAT performed FAT / Documentation Available: FAT plan and report Deviation management Layout check P&ID check Leak test Sensor calibration Service and accessibility inspection EN10204 factory certificate Material lists (LBM) As-built isometry Component lists (equipment & PLT nodes) Special Features Pharma-GMP compliant design Complete validation documentation Full traceability Certified pressure testing Calibration certificates from accredited laboratories High-quality plant construction by BRINOX High-end biopharma standard

Condition: used, This listing is for the Gram Vio Compact 610 Refrigerator The unit is in full working condition and is ready for immediate use although sins of wear include scratches to sides The Gram Vio Compact 610 is a professional-grade refrigerator designed for laboratory and medical applications. It offers reliable temperature control and energy efficiency, making it suitable for storing temperature-sensitive materials. Design & Features Exterior Finish: Available in white lacquered steel or stainless steel. Interior: ABS lining with stainless steel wall rails for mounting fittings. Kdjdexhf T Aopfx Ah Ejt Cooling System: Equipped with a finned tube evaporator and forced air distribution for uniform cooling. Defrost System: Automatic smart defrost with re-evaporation of defrost water. Control Unit: Gram Control Unit with voltage-free contact, alarms, and offset function. Alarms: Acoustic and visual high/low temperature alarms and door alarm. Applications The Gram Vio Compact 610 is ideal for: Laboratories requiring precise temperature control. Medical facilities storing biological samples. Pharmaceutical companies handling temperature-sensitive products The unit is moved easily on its lockable heavy duty castors

Condition: used, Year of construction: 2005, machine/vehicle number: LC671, Used Tetra Pak A3 flex 100V 330 prismaTechnical Specifications & Performance DataThis used bottling line is a Tetra Pak aseptic carton filling and packaging solution configured for 330 ml Prisma cartons. The central filling machine is a Tetra Pak A3 FLEX 100V, built in 2005, designed for Brik carton handling with a pull-tab configuration. The line also includes a new Tetra Pak Cap 30 FLEX cap applicator, built in 2026, configured for 330 ml Prisma cartons with Dream Cap closures.Filling machine: Tetra Pak A3 FLEX 100VFiller year: 2005Carton format: 330 ml PrismaCarton type: Brik cartonClosure configurations: pull tab and Dream CapCap applicator: Tetra Pak Cap 30 FLEX, built in 2026OPTIONAL: Accumulator ACHX30 - 2010, 14713H Advanced Automation & Control SystemsThe equipment features an integrated operator HMI/control panel, electrical control cabinet, pneumatic service components, mechanical drives and adjustable machine mechanisms. The filling and cap-application stations are intended to operate as coordinated industrial packaging equipment, supporting controlled handling of carton material, carton formation, filling, closing and downstream transfer. Operator access areas include service platforms, stairs and access panels for operation and maintenance activities.Production Line Integration CapabilitiesThis complete aseptic carton line is arranged around the filling machine and cap application process for 330 ml Prisma Brik cartons. It can be integrated with product preparation, upstream aseptic processing and downstream industrial packaging machinery according to the intended beverage production layout. An optional accumulator is available to provide carton buffering between line sections and help maintain production continuity during downstream interruptions.Machine typeManufacturer / modelYearFilling MachineTetra Pak A3 FLEX 100V2005Capping MachineTetra Pak Cap 30 FLEX2026Accumulation SystemACHX302010Machine Condition & Maintenance HistoryThe line includes a used Tetra Pak A3 FLEX 100V filler built in 2005 and a new Tetra Pak Cap 30 FLEX cap applicator built in 2026. The optional used ACHX30 accumulator was built in 2010 and records 14,713.8 running hours. The stainless-steel enclosure, service platform, access ladder, pneumatic tubing, conveyor or product-transfer sections and machine adjustment components are visible on the equipment.Operational Performance & VersatilityThe Tetra Pak aseptic carton filling s... Kdsdpezw Dvnefx Ah Eot

Condition: used, This listing is for a Thermo Fisher Scientific Labofuge 400R refrigerated Centrifuge. The unit is in full working condition and is ready for immidate realese. Ksdpfoxx Awgox Ah Esdt The Thermo Fisher Scientific Labofuge 400R is an air-cooled, quiet operating centrifuge, with temperature control for sensitive samples. This versatile refrigerated centrifuge has a temperature range between 0-40°C to help ensure low temperatures even during an extended run or when running at high speeds. The microprocessor control then monitors temperatures to prevent sample freezing. The wide range of compatible rotors, available from Thermo, allows users to fit most tubes. Easy Controls: The microprocessor control panel is set up front for easy access, with individual indicators showing temperature, speed, and RCF settings, as well as run time. Users can set their desired parameters quickly through the touchpad controls, choose a quick run for short spins, and engage a soft start/soft break for gentle processing of more sensitive samples. Spins are powered by an induction drive that’s maintenance-free for worry-free operation. Safety Features: The automatic imbalance detector will cut out the drive if the rotor is out of balance to protect components and your work. There is also rotor over speed protection to help reduce wear on components. The steel jacket system and durable construction help the system to comply with IEC 1010. The Labofuge 400R uses a highly effective cooling environmentally friendly technology, using standstill cooling, and R134A refrigerant.

Condition: used, Dinnissen pneumatic conveying system Entirely constructed in stainless steel Equipped with DCE filter (6 sintamatic cartridges) Fitted with Dinnissen bottom valve Suction tube 100mm Various cleaning hatches Outlet 300mm x 300mm (optionally convertible to round 300mm) Kdodjyvv Ivjpfx Ah Est Year of construction: 2002

Condition: excellent (used), Year of construction: 2024, OPERATING RANGE V807M Min. / max. height 10 – 460 mm Min. / max. width 50 – 1.140 mm Max. positioning weight 15.000 kg Max. operating width bottom side 1140 mm 1 Bevel angle + / - 50° Minimum automatic infeed length 1900mm Minimum automatic outfeed length Approx. 1400mm 2 1 Applicable to bottom side marking and square tube cutting. 2 1400mm automatic outfeed with at least one 1900mm part in the nesting. OPERATING SPEEDS Max. speed X-axis (measuring system) 60 m/min Max. air speed robot 11.6 m/sec Max. speed additional rotational axis 90 ͦ /sec ROBOT ACCURACY Repeatability ±0.04mm Absolute accuracy ±0.25mm MEASURING ROLL SYSTEM Max. speed 60 m/min Diameter measuring rolls 170 mm PLASMA CUTTING UNIT XPR300 CORE Min. thickness 3 mm Max. thickness 80 mm Max. pierce capacity 45 mm Dross-free cutting max. 38 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,5% pure clean, dry, oil-free) Marking Nitrogen gas Shield gas mild steel O2 and Air (ISO 8573-1:2010 Class 1.4.2) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.036 mm / min 130A 12 mm Approx. 3.061 mm / min 170A 25 mm Approx. 1.950 mm / min 300A 30 mm Approx. 1.530 mm / min 300A 40 mm Approx. 940 mm / min 300A 50 mm Approx. 560 mm / min 300A Kodpfjzy Sqfox Ah Esdt 80 mm Approx. 165 mm / min 300A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes.

Condition: used, Log Infeed System Kdsdpezmf I Refx Ah Eot Manufacturer: Jack Steel Year of manufacture: 2019 Hydraulic log infeed system Twin-chain feed conveyor Electric control system Suitable for feeding logs to sawmill or sorting lines

Year of construction: 2022, operating hours: 8 h, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, Fully electric CNC tube bending machine manufactured in 2022. This BLM E-TURN 52B features a Siemens Simotion CNC control system and offers advanced bending capabilities, including fixed radius, variable radius, and multi-radius bending. It is designed for low energy consumption and includes programmable booster and tooling stacks for enhanced performance. If you are looking to get high-quality tube bending capabilities, consider the BLM E-TURN 52B machine we have for sale. Contact us for further details. • Number of axes: 14 • Energy consumption: Low • Bending direction: Right and left bending in-process (automatic direction change) • Bending capability: Fixed radius, variable radius, and multi-radius • Tool configuration: 3 tooling stacks + 3 additional tooling stacks • Tool stack height: 60 mm (2.4") • Tube capacity: • Carbon steel (FE37): max diameter 50.8 mm (2.0"), max wall thickness 1.5 mm (0.06"), based on RM 1.5D, Vy50% • Stainless steel (AISI 304): max diameter 50.8 mm (2.0"), max wall thickness 2.0 mm (0.08"), based on RM 2D, Vy50% • VGP3D software features: • 3D graphical programming • Part feasibility verification with collision detection Kdjdpszqtzgefx Ah Ejt • Automatic cycle time calculation • Automatic machine cycle generation • Faster quotation preparation and production planning • Standard equipment: • Electrically driven pressure dies • Left and right counter-die supports • Programmable booster / variable-radius unit (booster force 20,000 N; booster speed 1,000 mm/min) • Mandrel bars: 10 mm (0.39"), 16 mm (0.63"), 24 mm (0.94") • CE compliant Additional equipment • WELDET-07: Programmable weld seam positioning system (optical weld seam detection based on color contrast; compatible with ET30, ET35, ET40, ET52) • MC1052-01: Blind hole detection device

Condition: used, functionality: unexamined, Year of construction: 1995, total length: 116,000 mm, overall weight: 21,000 kg, Used belt conveyor length approx. 116mtrs. Includes: -10pcs of 9mtr + 1pc of 4m + 1pc of 12m modules -Tail/loading section, needs some re-conditioning - Drive station -Tripper unit, it can travel approx 100mtrs along the conveyor operated by winch + steel cable (not included) and discharges material to both sides of conveyor -Counter weight tensioning station -1000mm EP400/3 4+2 conveyor belt -Siemens motor 37kW + Kumera gear -Roxon belt cleaners. -Hanging square tubing, hangers at 3m pitch -Has been dismantled form bolt-joints Kdedpjzkkmaofx Ah Eet -All drums + drive motor/gear spinning freely, not stucked

Condition: reconditioned (used), Sorting machine overhauled and ready for operation the price is depending on condition and equipment, software and hardware status 2008 - 2014 they like to come with material for trial sorting. the machines are for slag, shredder residue, residual fractions, cable, aluminum, Va, Ne about 12-120mm depending on the fraction 1-2 screen cuts should be made. Functionality induction and magnetizability, discharge with air approx. 3- 9 to throughput depending on material up to 40 to Kdodpfx Ajt Rv Nash Eot

Condition: used, Year of construction: 2016, Used machine Year of manufacture: 2016 Equipment and technical data: - Electrics 3x400V 50 / 60Hz - Gimbal-mounted 5-axis electrospindle 12 kW (S6) HSK F63 - 24,000 rpm - ceramic bearings incl. liquid cooling with infinitely height-adjustable extraction hood - electric-motor controlled - full rated power at approx. 12,000 rpm - speed: 1000 - 24000 rpm - drive: 3-phase HF motor, inverter-controlled - direction of rotation: clockwise/counter-clockwise - 2 controlled compressed-air connections - interface for aggregates - tool weight (rotating): 6 kg - max. saw blade Ø 350 - spindle cooling: liquid cooling - extraction hood infinitely variable - Profit H350 16.30: CNC machining centre in gantry design (without tool) with digital drives (driven on both sides). The machine column of the Profit H350 16.30 is made of thick-walled, electrically welded rectangular tubes. The steel ribbing inside the column achieves high stability. - Machining field H350 16.30: Travel of the axes: X = 4000 mm Y = 1970 mm Z = 455 mm Working field: X = 3000 mm Y = 1500 mm Z = 150 mm clearance height Axis positioning speeds: depend on the selected safety system (these can be found in the layout). - Travelling gantry driven on both sides Ksdezlbpbopfx Ah Esdt - Guide system X axis: The travelling gantry of the X axis is driven via a rack with inclined, crowned tooth form - This guarantees highest precision. The reduction gear ensures highest machining quality and repeat accuracy. The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. - Guide system Y axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Y axis is positioned by means of a ground recirculating ball screw. - Guide system Z axis: The bearing is provided by means of encapsulated recirculating-ball shoes running on hardened and ground linear guides. The Z axis is positioned by means of a ground recirculating ball screw. - Automatic central lubrication: The grease is delivered in a controlled manner to the guide carriages of the X, Y and Z axes as well as to the recirculating ball screws in Y and Z. The lubrication process is carried out automatically after a specified time. - 12-position linear tool changer on the left of the machine column incl. a pick-up position for aggregates: The 12-position linear changer ensures shortest changeover times and offers sufficient space for milling tools. One aggregate change position (fitting variants see layout) Max. tool diameter 250 mm Max. tool length 240 mm - Drilling head DH 18 6H 1S: Vertical 12 spindles: 7 spindles in the X direction and 5 spindles in the Y direction. Horizontal 6 spindles: 4 spindles in the X direction and 2 spindles in the Y direction. Forward stroke = 70 mm max. drill length = 70 mm and shank D = 10 mm. All spindles are individually driven and selectable. 1 grooving saw – in the X direction max. saw blade diameter 120 mm max. blade thickness 5 mm max. speed infinitely variable up to 7500 rpm. The drilling group covers the entire working field both horizontally and vertically. - Controlled central extraction connection: Via the program control, either the drilling head or the milling spindle is extracted. This controlled slide gate achieves an optimised extraction performance. Connection diameter see layout - 6 workpiece supports: With front and rear...

Condition: excellent (used), Year of construction: 1999, machine/vehicle number: NOH603/47, Stahl P300 Olympia Stahlbau bridge crane, gantry crane, crane system, crane runway, hall crane Dimensions approximately 12 x 5.6 m Load capacity / lifting capacity 250 kg 1 bridge crane with 250 kg load capacity and chain hoist – gauge 5.33 m Technical data of the system: Total crane height approx. 4.42 m Top of rail to top of rail approx. 4.42 m Bottom of rail to bottom of rail approx. 4.18 m Bottom of bridge to bottom of bridge approx. 3.87 m Hook height approx. 3.25 m Gauge approx. 5.33 m Total width approx. 5.57 m External dimensions of the steel structure (space requirement) 12 x 6 m System is delivered complete: Steel structure / crane runway, free-standing, made of 140x140 mm square tubing + IPE240 runway rails + power supply 1 bridge crane, 250 kg load capacity incl. chain hoist Kjdpfx Aezdbrhjh Esdt Base plates 30x30 cm Crane is disassembled and immediately available, transport length 12 m!!!! Item location is 75053 Gondelsheim Inspection book with EC declaration is available Very good condition, see pictures Shipping via freight forwarder or collection by appointment only.

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) Kjdpfjxvca Aox Ah Eedt B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: like new (used), DEMONSTRATION MACHINE ELMAG band saw including 2 bi-metal saw blades & 5 liters of coolant Like-new DEMONSTRATION MACHINE with minimal operating time! For sale is a high-quality band saw in very well-maintained, like-new condition. Kedpjzzzitefx Ah Eodt Included in the scope of delivery: 1x Bi-metal saw blade – NEW 1x Bi-metal saw blade – already installed 1x ELMAG coolant concentrate, 5 liters Machine as a DEMONSTRATION MACHINE with minimal operating time Ideal for workshops, metal construction, locksmiths, assembly companies, and demanding DIY enthusiasts. Technical data: Cutting range for round tubes at 0°: max. 180 mm Cutting range for round tubes at 45° right-hand miter: max. 110 mm Cutting range for square tubes at 0°: max. 180 mm Cutting range for square tubes at 45° right-hand miter: max. 110 mm Cutting range for rectangular tubes at 0°: max. 305 × 180 mm Cutting range for rectangular tubes at 45° right-hand miter: max. 180 × 110 mm Saw blade length: 2,360 mm Saw blade height: 20 mm Saw blade thickness: 0.9 mm Cutting angle: 0–45° Speed stages: 4 Cutting speed: 18 / 28 / 37 / 54 m/min Saw blade drive: 750 W Coolant pump: 100 W Mains connection: 400 V / 50–60 Hz Sound pressure level steel: 71 / 73 dB(A) Infeed height: 530 mm Dimensions (L × W × H): 1,250 × 430 × 1,000 mm Weight: approx. 130 kg The machine is located in A-5431 Kuchl and can be inspected and assessed at any time during our opening hours. Subject to prior sale! Related terms / search terms: Band saw, metal band saw, metal band saw machine, band saw metal, sawing machine, metalworking, miter band saw, miter saw, band saw 400 V, industrial band saw, workshop machine, metal construction, steel band saw, sawing machine, metal band saw 2300 mm, ELMAG, ELMAG band saw, bi-metal saw blade, coolant, workshop equipment, locksmith, mechanical engineering Reference: R-A0117