Used Steel Hall for sale (17,731)

Condition: used, empty load weight: 8,300 kg, axle configuration: 3 axles, first registration: 06/2026, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2025, ref: F1209171 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Device for rail loading, * Ferry lashing, * Side impact protection, Lrsdpfxjy Tblus Ahksr * Wheel chocks: 2, * Access ladder, * Rear door design: Rear portal doors, * Locking rods on rear doors: 4, * Floor: Aluminum floor, * Double-decking system, * Lashing rails: 2 VIN: WKESD000001209171 Tire dimension: 385-65 R22.5 Internal length: 13.31m Width: 2.6m Internal width: 2.46m Height: 4m

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, blade shaft diameter: 240 mm, coil weight: 25,000 kg, type of input current: three-phase, input voltage: 400 V, product width (max.): 1,650 mm, sheet thickness stainless steel (max.): 5 mm, Stainless steel slitting line with NLT slitter-setup-robot — fully functional and in excellent condition. Basic Technical Specifications: - Material: Stainless steel - Material thickness: 0.3–3.5 (5 mm) - Material width: 400–1,650 mm Lsdpfx Ajztykgehkorr - Line speed: max. 250 m/min. - Coil weight: max. 25 metric tons (unwinding and rewinding) - Coil outer diameter: max. 1,820 mm (unwinding and rewinding) - Coil inner diameter: 508 / 610 mm (rewinding with attachment) - Slitting shaft diameter: 240 mm - Blade diameter: max. 380 mm - Slitter drive: 201 kW - Rewinding recoiler drive: 212 kW Cutting capacity – stainless steel (max.): Thickness 0.3–1.0 mm: 25 strips Thickness 1.0–1.5 mm: 20 strips Thickness 1.5–2.5 mm: 14 strips Thickness 2.5–3.0 mm: 5 strips Thickness 5 mm: 2 strips System consists of: - 4-fold coil magazine - Coil car - Uncoiler with snubber roll – uncoiler movable - Paper winder - Strip edge control - Inserting device with bending roll - Pull-off stand - 5-roll straightening machine - Crop shear with scrap cart - Laminating frame - Slitter - Edge trimmer - 4-position blade changer - NLT slitter-setup-robot PRCS20 - Loop - Braking unit (plate) - Transfer table with separating shaft (automatic) - Recoiler - Coil car - 4-fold turnstile

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Ledjztwx Ujpfx Ahkerr Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures

Condition: used, mileage: 280,000 km, power: 265 kW (360.30 HP), first registration: 02/2000, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 2000, Equipment: power assisted steering, = Additional options and accessories = - Hub Reduction - Immobilizer - PTO - Sper = Remarks = MAN 33,364, 2000, Euro 2, 6x4 with hub reduction, Fully leaf-sprung, Manual transmission, Stainless steel tank, Kipper, No vacuum pump = More information = Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Reduction: hub reduction Rear axle 2: Double wheels; Reduction: hub reduction Number of cylinders: 6 Lredpfey Ep Ulex Ahkor Tipper: Back Price: On request = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, mileage: 245,000 km, power: 265 kW (360.30 HP), first registration: 02/2001, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 2001, MAN 33,364, 2001, 6x4 with hub reduction, Fully leaf-sprung, Manual transmission, Stainless steel tank, No pumps! = More information = Suspension: leaf suspension Front axle: Steering Ljdpfx Ajy Dppvjhkjrr Rear axle 1: Double wheels; Reduction: hub reduction Rear axle 2: Double wheels; Reduction: hub reduction Price: On request = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Year of construction: 1999, condition: used, functionality: fully functional, 2 x 173 m³ storage silos made of stainless steel (material 1.4301) (formerly plastic granulate silo) Technical data / Dimensions Available quantity: 2 Volume: approx. 172,000 liters Container type: Silo Condition: used Design: vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 20,000 mm Weight: approx. 9,000 kg Specific weight of the medium: 0.6 tons/m³ Operating pressure: non-pressurized Ground clearance: approx. 500 mm Material / Properties Material of inner lining: Stainless steel Notes: Material: 1.4301 Support structure: Base ring / base flange Type of bottom: Conical bottom Slope: approx. 15% Type of bottom (lower part): Cone Cone angle: 60 degrees Top: 1 x roof edge railing, height: approx. 1,200 mm 1 x walkway with platform 2 x crane eyes 1 x manhole DN 600 1 x connection flange for level measurement 1 x welded-in nozzle for full level indicator Lsdpfexvtvujx Ahksrr 1 x flange DN 100 (filling) 1 x vent with cap Shell: 1 x operating room door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100 ending in a TW connection 1 x welded-in adapter for empty level indicator Bottom: The silos end at the bottom in a 60° cone with an emergency shut-off valve and a mounted extraction spout (see photos). A three-section ladder with back protection and rest platforms is available as an option.

Condition: good (used), functionality: fully functional, Characteristics: * Length: 40 m * Width: 20 m * Height (center): 10.2m * Height (side): 6 m * PVC roof: 850 gr/m2 Description: Aluminum profile building of 800 m² with PVC roof. The building is equipped with a control cabinet, 6 electric air heating units (with temperature control), lighting and several outlets 220/380. Furthermore, there are 2 electric overhead doors. The building is demountable and can be expanded if required. Ljdpfxjwbtays Ahkorr

Condition: new, functionality: fully functional, From closed factory a batch of steel cable. Ljdpfx Ahoyfgtgskerr Steel / galvanised / stainless steel Diameter: 4- 20 mm Attached list is non verified. Offer is based on photo's shown. On-site visit on request.

Condition: used, Steel structure for crane system Width: approx. 8.5 m Length: approx. 7.95 m System dismantled Ljdpjbruzgefx Ahkerr The system is sold "as is". Inspection: You are cordially invited to inspect the item – simply contact us and arrange an appointment at short notice. Note: no guarantee, no exchange, no returns possible.

Condition: used, Steel structure for crane system Width: approx. 5.26 m Length: approx. 4.46 m System disassembled Lredsbruzlspfx Ahkjr The system is sold “as is” Inspection: You are cordially invited to inspect the item – simply contact us and arrange an appointment at short notice. Note: No guarantee, no exchange, no returns possible.

Condition: used, Steel structure for crane system Width: approx. 17.3 m Length: approx. 9.4 m System dismantled The system is sold "as is" Ledpfx Asbruy Uohkjrr Inspection: You are cordially invited to inspect the item – simply contact us and arrange an appointment at short notice. Note: No guarantee, no exchange, no returns possible.

Condition: used, Steel structure for crane system Width: approx. 8.3 m Length: approx. 5.1 m System dismantled The system is sold “as is”. Inspection: You are cordially invited to inspect the item – simply contact us and arrange an appointment at short notice. Lredpfx Ajbruzbshker Note: No warranty, no exchange, no returns possible.

Condition: used, Steel structure for crane system Width: approx. 8.0 m Length: approx. 5.1 m System dismantled The system is sold "as is". Lredobruzdopfx Ahkor Inspection: You are welcome to inspect the item – simply contact us and arrange an appointment at short notice. Note: No guarantee, no exchange, no returns possible.

Condition: used, Transport container with galvanized steel frame Nominal capacity: approx. 1,000 l Overall height: approx. 1,550 mm Length: approx. 1,100 mm Width: approx. 950 mm Weight: 215 kg Material: Material: V4A 1.4404 Manhole DN 400 Bottom: Outlet DN 50 extending towards the front with shut-off valve Lodoztpz Uspfx Ahkerr Otherwise, as shown in the pictures Manufacturer: BLEFA Note: The containers were last used for storing chemical and pharmaceutical products.

Condition: ready for operation (used), Used stainless steel tank with insulation and heating coil Article number: 10250 Last known use: Unknown Volume: approx. 2150L Type: Standing on legs Material (in contact with media): 1.4301 / AISI304 Design: Insulated with heating coil Bottom: Flat bottom Top: Hinged lid Operating pressure according to nameplate: ATM Tank dimensions: Tank diameter: 1790mm Cylindrical height: 950mm Overall height: Approx. 1860mm Height of legs: 670mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Lodpfod Dd Rzox Ahkerr Equipment: Hinged lid Insulation Heating coil inside the tank Side connections

Condition: new, Stainless steel filling container, tank, canister Article number: 10261 Safety filling container made of stainless steel, FM-approved, 19 liters volume - for safe dispensing of liquids Lrjdpfod Dwtuex Ahkor - safety container made of stainless steel - flame arrestor screen in the filling opening - self-closing lid and overpressure valve - FM-approved - equipped with a self-closing tap 3/4" Application: Dispensing Length (external) (mm): 410 Width (external) (mm): 280 Height (external) (mm): 400 Diameter (external) (mm): 280 Weight (kg): 4.09 Volume (l): 19

Condition: good (used), Used pressure vessel on rollers Article number: 10563 Last use: Pharmaceutical Volume: 750 liters Type: Standing on 4 rollers Material (in contact with media): 1.4571 / AISI316 Design: Double jacket and insulated Operating pressure according to nameplate: -1 / 3 bar Operating pressure, jacket: 10 bar Vessel dimensions: Manhole: 505 mm Ljdpsgz Szwjfx Ahksrr Outer diameter: 1240 mm Roller height: 295 mm Overall height: 2195 mm Overall width: 1240 mm Overall length: 1400 mm Materials: Inside: 1.4571 / AISI316 External parts: 1.4301 / AISI304 Equipment: Nameplate: Yes Outlet diameter: 1x 34 mm, 1x 9 mm Distance from outlet to bottom: 1x 280 mm, 1x 295 mm Various connections Double jacket Insulated Roller frame

Condition: excellent (used), Used Stainless Steel Pressure Vessel Article number: 10620 Last application: Pharmaceutical Volume: 200 L Type: Standing on 4 rollers Roller height: 127 mm Material (in contact with media): 1.4404 / AISI316 Design: Single-walled Dome lid: 320 mm Operating pressure: -1/+3 Lodpfehpz E Hsx Ahkorr Vessel dimensions: Outer diameter: 652 mm Cylindrical height: 560 mm Total height: 1295 mm Total width: 718 mm Total length: 865 mm Materials: Inside: 1.4404 / AISI316 Outside: 1.4301 / AISI 304 Equipment: Nameplate: No Various connections Pressure valve

Condition: excellent (used), Used stainless steel pressure vessel Article number: 10587 Volume: 106 liters Type: standing on a roller base / 4 rollers Material (in contact with media): 1.4571 / AISI316 Design: single-walled Opening: 305 mm Operating pressure according to nameplate: 3 bar Max. operating temperature: -10 / 50 °C Dimensions of the vessel: Outer diameter: 440 mm Cylindrical height: 520 mm Overall height: 1070 mm Overall width: 450 mm Overall length: 505 mm Materials: Inside: 1.4571 / AISI316 External parts: 1.4301 / AISI 304 Features: Lredshtnl Ijpfx Ahker Nameplate: yes Outlet diameter: 33 mm Distance from outlet to bottom: 210 mm Outlet valve: ball valve Vessel can be lifted from the roller base (450x455 mm) Various connections

Condition: used, Used stainless steel tank / silo / IBC Previous application: dry bulk goods Item number: 10895 Volume: 1,160 litres Type: Standing, in a stainless steel stacking frame Product-contact material: 1.4301 / AISI304 Manhole: 450 mm Design: Single-walled Operating pressure according to nameplate: ATM Tank dimensions: Total width: 1,270 mm Total length: 1,080 mm Total height: 1,900 mm Leg height: 120 mm Materials: Internal: 1.4301 / AISI 304 Lsdpeyvgprefx Ahkorr External parts: Stainless steel Features: Nameplate: yes Outlet diameter: DN250 Outlet valve: Butterfly valve Clearance from outlet to floor: 200 mm

Condition: new, Brand new, factory-fresh stainless steel tank Article number: 10632 Volume: 500 L Type: Standing on 4 legs Height of legs: 540 mm Material (in contact with media): 1.4301 / AISI304 Design: Single-walled Operating pressure as per nameplate: ATM Tank dimensions: Outer diameter: 804 mm Cylindrical height: 990 mm Overall height: 1385 mm Overall width: 835 mm Overall length: 954 mm Materials: Inside: 1.4301 / AISI 304 Outside: 1.4301 / AISI 304 Features: Nameplate: No 2 x 3/4" socket on the cylinder Lrodoza Ei Aopfx Ahker Distance from drain to bottom: 395 mm

Condition: good (used), Used stainless steel pressure vessel with insulation and electric heating Article number: 10465 Last application: Cosmetics Volume: approx. 300 liters Type: Standing on 4 rollers with forklift tunnel Material (in contact with media): 1.4301 stainless steel Design: Single-walled with insulation Bottom: Curved Top: Curved Operating pressure according to nameplate: +3 bar Dimensions of the vessel: Outer diameter: 700 mm Height of feet: 185 mm Distance from outlet to bottom: 190 mm Overall height: 1850 mm Overall width: 900 mm Overall length: 700 mm Materials: Inside: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Equipment: Outlet: DN32 mm Outlet type: Disc valve Manhole: 600 mm Various connections Electric heating Insulated Lredpefcwxnofx Ahkor Forklift tunnel

Condition: good (used), Used stainless steel pressure vessel with insulation and electric heating Article number: 10466 Last application: Cosmetics Volume: approx. 400 liters Type: Standing on 4 rollers with forklift tunnel Material (media-contact): 1.4301 stainless steel Design: Single-walled with insulation Bottom: Conical bottom Top: Arched Operating pressure according to nameplate: +3 bar Dimensions of the vessel: Outer diameter: 750mm Height of the feet: 190mm Distance from outlet to bottom: 220mm Overall height: 1900mm Overall width: 950mm Overall length: 750mm Materials: Inside: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Lsdpfx Ahofdgrhskorr Equipment: Outlet: DN32mm Outlet type: Ball valve Manhole: 645mm Various connections Electric heating, not tested Forklift tunnel

Condition: good (used), Used stainless steel pressure vessel with insulation and electric heating. Article number: 10467 Quantity: 15 pieces Last application: Cosmetics Volume: approx. 350 liters Type: Standing on 4 rollers with forklift tunnel Material (in contact with media): 1.4301 stainless steel Design: Single-walled with insulation Bottom: Conical bottom Top: Arched Operating pressure according to nameplate: +3 bar Vessel dimensions: Outer diameter: 740 mm Height of feet: 190 mm Distance from outlet to bottom: 190 mm Overall height: 1850 mm Overall width: 960 mm Overall length: 740 mm Materials: Inside: 1.4301 / AISI304 External parts: 1.4301 / AISI304 Features: Outlet: DN32mm Outlet type: Ball valve Manhole: 645 mm Various connections Electric heating, not tested Lrjdpfsfdgrlox Ahksr Forklift tunnel

Condition: good (used), Used stainless steel mixing vessel with a double jacket Article number: 10492 Last application: Food Volume: approx. 1400 liters Type: Standing on 4 legs Material (in contact with the medium): 1.4301 stainless steel Design: With double jacket Manhole: 1250x420mm hinged cover on both sides Bottom: Curved Top: Hinged cover Operating pressure according to nameplate: ATM Dimensions of the vessel: Outer diameter: 1460mm Cylindrical height: 870mm Overall height: 2040mm Overall width: 1460mm Height of legs: 560mm Materials: Ljdpfx Ahefiguuekorr Inside: 1.4301 / AISI304 Exterior parts: 1.4301 / AISI304 Equipment: Double jacket Nameplate: yes Outlet: 70mm Various connections Grid grates Mixer