Used Steel Hall Construction for sale (31,337)

Condition: excellent (used), Lockable stainless steel container, stainless steel pot, stainless steel cooking pot -Stainless steel: Stainless steel pot Kdedob Uhmrepfx Abnjr -Internal dimensions: 375 mm -Depth: 310 mm -Quantity: 1 pieces available -Price: per piece -Dimensions: 400/H310 mm -Weight: 2.4 kg

Year of construction: 2004, condition: excellent (used), Stainless Steel Fermenters / Storage Tanks - 39,000 L - Food Grade These ASTM 304 stainless steel tanks are highly versatile and ideal for the industrial storage or fermentation of wine, spirits, distillates, and craft beer. They are also perfectly suited for the essential oil industry to store floral waters (like rose or lavender distillate) and for water treatment facilities requiring large-capacity hygienic storage. Their conical bottom design ensures 100% full drainage and effortless cleaning, making them highly efficient for various food-grade and liquid processing applications. • Quantity: 6 units • Capacity: approximately 38 m3 (38,000 liters) each • Type: Vertical stainless steel tanks • External dimensions: • Diameter: 2.80 m • Height: 7.20 m • Material: Stainless steel (food grade), ASTM 240 type 304 / AISI 304 • Last used: 2017 • Condition: Good, stored empty • Location: Rosenovo, Sredetz Municipality, Burgas region, Bulgaria • Suitable for: wine, juice, beer, edible oils, food & beverage liquids or other liquids (they have been used for wine storage). PRICE IS PER UNIT. Available as a full lot or individually (Full lot price is 7000 EUR per unit). Loading assistance possible. Kjdpfezud Irex Abnjdr

Condition: used, Year of construction: 1977, Mobile excavator Manufacturer: Liebherr Type: A 921 C Year of manufacture: 1977 Weight / operating weight: approx. 18,000 kg Transport length: approx. 8.50 – 9.00 m Transport width: approx. 2.48 – 2.50 m Height (above cab): approx. 3.15 – 3.20 m Engine & Drive Engine type: Deutz F6L 912 (air-cooled 6-cylinder naturally aspirated diesel engine) Power: approx. 100 – 106 hp (70 – 78 kW) at 2,300 rpm Displacement: 5.6 liters (5,652 cm³) Cooling system: Air cooling (very low maintenance, ideal for cold starts) Maximum speed: approx. 20 km/h (Hydrostatic drive with stepped control) Hydraulics & Working Equipment Hydraulic system: Hydromatik axial piston pumps with performance-controlled total control Hydraulic oil tank capacity: approx. 270 liters Kodpszrzymefx Abnjdr Diesel tank capacity: approx. 228 liters Standard bucket volume: approx. 0.60 – 1.00 m³ 5826

Year of construction: 2025, condition: like new (used), functionality: fully functional, I sell materials of various diameters and qualities: - Material D2 (W.N.r. 1.2379), diameter = 29 mm, weight = 1089 kg - Material D2 (W.N.r. 1.2379), diameter = 33 mm, weight = 1050.18 kg - Material D2 (W.N.r. 1.2379), diameter = 65 mm, weight = 52.10 kg Kdodpjy Ufarjfx Abnor - Material OCR8W SIHARD S471 – BOHLER K360, diameter = 26 mm, weight = 595.92 kg - Material OCR8W SIHARD S471 – BOHLER K360, diameter = 33 mm, weight = 1428.56 kg - Material OCR8W SIHARD S471 – BOHLER K360, diameter = 40 mm, weight = 2219.50 kg

Condition: like new (used), Diameter 3m Height 9m Kdedpfxoimwgxs Abnsr Standing on six legs.

Condition: like new (used), Horizontal carbon steel tanks 73.000l Dim. 3x 11m Cyllinder thickness 8mm Bottom thickness 12mm Kdedpjibh S Hefx Abnjr Equipped with a ladder.

Condition: excellent (used), Due to the dimensions, the tanks are cut into pieces and welded by us at the customer's site. Ksdpoma Dguefx Abnedr Height 4,30m, Lenght 11m The cyllinder is made of AISI316 steel, the upper and lower heads are made of duplex steel, but AISI316 steel can be ordered. Welding price is discussed separately. 2 units available. We also offer 300m3 with dimensions 6.40 x 11.5 m for the price of 72900€ and 2 units 500 m3 with dimensions 8x 11.50 m for 108900 €.

Condition: used, 55m3 stainless steel horizontal tank diameter 2.50m length 11m steel grade AISI 316L Ksdpfxov Idn Nj Abnsdr externally reinforced with rings drip tray included

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 11/1989, total width: 2,490 mm, suspension: steel, tire size: 385/65, tire condition: 30 %, wheelbase: 5,460 mm, color: other, Year of construction: 1989, = Additional options and accessories = - Leaf spring = More information = Axle configuration Tyre size: 385/65 Kodpfxjzuaq Nj Abnsdr Make axles: Fruehauf Tyre profile: 30% Brakes: drum brakes Suspension: leaf suspension Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Weights Empty weight: 2.840 kg Carrying capacity: 27.160 kg GVW: 30.000 kg Identification Registration number: OB-15-HG

Condition: used, Technical data: - Width: approx. 100 mm - Height: approx. 220 mm Kdjdpfxezry A Ts Abnsr - Length: approx. 1,500 mm - Similar to: IPE 220

Condition: used, Technical data: Kjdpfxszrx I Uj Abnedr - Length: 200 cm - Width: 50 cm - Height: 97 cm

Condition: used, 5 mm 5 x 1 5 m 1 x 5 m Technical data: - Diameter: 27–36 mm - Internal thread approx.: 30 Kjdpfjzrxl Hjx Abnjdr

Condition: used, Used NIRO stainless steel spray dryer - N° 1405 - Tank Ø 800 x 600 mm - Cone Height 650 mm - Electric heating 9 kw - Fan 0.75 kw Kodpfozcwnvex Abnedr

Condition: excellent (used), Stencil letters Kjdpozrtnvefx Abnjdr Letter height: 9 mm Very good condition

Condition: excellent (used), mileage: 14,400 km, first registration: 06/2004, color: yellow, loading space volume: 14 m³, Year of construction: 2004, Bekker Lagram RVS (Onox 1.44) 14400 liters possible whit chassis and cilinder = More information = Kdjdpfx Abewwtk Densr Technical condition: very good Visual condition: very good Contact Gerrit Haverhoek or Piet Haverhoek for more information.

Condition: good (used), mileage: 325,605 km, power: 279 kW (379.33 HP), first registration: 04/2006, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, fuel: diesel, color: other, driver cabin: other, gearing type: mechanical, emission class: euro3, suspension: steel, total length: 9,000 mm, total width: 2,500 mm, total height: 3,200 mm, Year of construction: 2006, Equipment: ABS, electric window regulation, = Additional options and accessories = Kodpfozt Nn Uox Abnodr - 1 fuel tank - 1 sleeping place - Armrest - Day Cabin - Disc brakes - Front suspension: Leaf - Radio/Cassette player - Rear suspension: Leaf = More information = Cab: single, half sleeper Tyre profile: 50% Brakes: disc brakes Suspension: leaf suspension Front axle: Steering Rear axle 1: Steering Technical condition: good Visual appearance: good

Year of construction: 2000, operating hours: 3,060 h, condition: used, Transmission: Automatic Power: 22 kW (30 HP) Ksdezt I T Nepfx Abnedr Empty weight: 1.200 kg Please contact Emal Jaweed for more information

Year of construction: 2020, condition: new, Title: Strassburger Filter SF400oDEC/30S Integra – Stainless Steel Plate Filter Press – Year of Manufacture 2020 – NEW / unused Brief Description: For sale are unused, original-packaged plate and frame filter presses from the renowned German manufacturer Strassburger Filter GmbH + Co. KG. The units are in new condition, have never been put into operation, and are originally packaged by the manufacturer. Manufacturer: Strassburger Filter GmbH + Co. KG (Germany) Model / Type: SF400oDEC/30S, Integra format Machine designation: FI6722 – FP PRE 1 Year of Manufacture: 2020 Serial Number: e.g. 032003303920 (other serial numbers available) CE Marking: Yes Condition: New / unused Original packaging Never installed, never used in production Stock item Kodpfx Aex Ihufobnjdr Quantity available: 3 identical machines available New Price: New price €94,000 per unit Design / Material: Completely stainless steel Plate and frame filter press Gasketed plates Pharmaceutical / Biotech design Hydraulic closure including hydraulic unit CE-compliant Technical Data: Plate format: 425 × 400 mm Number of filter chambers: 28 Total filter area: approx. 3.4 m² Total volume: approx. 13.6 liters (100%) Max. operating pressure: 6 bar Max. operating temperature: 95 °C CIP / SIP capable (cleaning up to 121 °C) Dimensions & Weight: Length: approx. 1,649 mm Width: approx. 600 mm Height: approx. 1,145 mm Weight of filter frame: approx. 480 kg Weight of plate pack: approx. 120 kg Plate Pack: 14 filter plates 13 filter frames 1 end frame 1 baffle plate 28 filter layers per configuration Hydraulics & Drive: Hydraulic closure Hydraulic unit included Motor power: 1.5 kW Electrical connection: 400 V / 50 Hz Valve voltage: 24 V DC Compressed air requirement: 3.0 bar Connections: Product inlet and outlet DN25 Vent / drain DN15 Connections according to DIN 11864-2 Drip tray available Application areas: Pharmaceutical production Biotechnology Chemical industry Pre-filtration Precipitation and clarification processes Location: Germany Inspection possible by appointment Available immediately

Condition: excellent (used), mileage: 228,018 km, first registration: 03/1991, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, suspension: steel, total length: 7,000 mm, total width: 2,200 mm, total height: 2,260 mm, Year of construction: 1991, = Additional Options and Accessories = - PTO = Notes = Despite our best efforts to ensure the data is entered correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual vehicle. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino Kdodpfszt Awvox Abnsr = Further Information = Axle Configuration Front axle: Steered Rear axle: Twin tires; Suspension: Leaf spring suspension Weights Unladen weight: 5,030 kg Payload: 4,970 kg GVW: 10,000 kg Functional Features Pump: Yes Dumper: Rear Condition Technical condition: very good Optical condition: very good Further Information Please contact Thierry Leemans for more information.

Condition: used, empty load weight: 8,300 kg, axle configuration: 3 axles, first registration: 06/2026, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2025, ref: F1209171 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Device for rail loading, * Ferry lashing, * Side impact protection, * Wheel chocks: 2, * Access ladder, * Rear door design: Rear portal doors, * Locking rods on rear doors: 4, * Floor: Aluminum floor, Kdedpfey Tblujx Abner * Double-decking system, * Lashing rails: 2 VIN: WKESD000001209171 Tire dimension: 385-65 R22.5 Internal length: 13.31m Width: 2.6m Internal width: 2.46m Height: 4m

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, blade shaft diameter: 240 mm, coil weight: 25,000 kg, type of input current: three-phase, input voltage: 400 V, product width (max.): 1,650 mm, sheet thickness stainless steel (max.): 5 mm, Stainless steel slitting line with NLT slitter-setup-robot — fully functional and in excellent condition. Basic Technical Specifications: - Material: Stainless steel - Material thickness: 0.3–3.5 (5 mm) - Material width: 400–1,650 mm - Line speed: max. 250 m/min. - Coil weight: max. 25 metric tons (unwinding and rewinding) - Coil outer diameter: max. 1,820 mm (unwinding and rewinding) - Coil inner diameter: 508 / 610 mm (rewinding with attachment) - Slitting shaft diameter: 240 mm - Blade diameter: max. 380 mm - Slitter drive: 201 kW Kjdpfx Aoztykgsbnodr - Rewinding recoiler drive: 212 kW Cutting capacity – stainless steel (max.): Thickness 0.3–1.0 mm: 25 strips Thickness 1.0–1.5 mm: 20 strips Thickness 1.5–2.5 mm: 14 strips Thickness 2.5–3.0 mm: 5 strips Thickness 5 mm: 2 strips System consists of: - 4-fold coil magazine - Coil car - Uncoiler with snubber roll – uncoiler movable - Paper winder - Strip edge control - Inserting device with bending roll - Pull-off stand - 5-roll straightening machine - Crop shear with scrap cart - Laminating frame - Slitter - Edge trimmer - 4-position blade changer - NLT slitter-setup-robot PRCS20 - Loop - Braking unit (plate) - Transfer table with separating shaft (automatic) - Recoiler - Coil car - 4-fold turnstile

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,300 mm, total length: 9,000 mm, total height: 2,300 mm, overall weight: 9,000 kg, Mobile Roll Forming Machine for Frameless Steel Arch Buildings Automatic Production Line for Self-Supporting Steel Hangars and Arch Roofs The mobile roll forming machine is designed for the on-site production of self-supporting curved steel panels used for the construction of frameless steel buildings, arch hangars and self-supporting metal roofs. The technology makes it possible to construct large-span steel buildings without a conventional internal steel frame. Steel coil is formed into a structural profile, cut to the required length and then curved to the required building radius. Several curved panels are connected together using a special seaming machine to form a strong, continuous and self-supporting arch structure. The equipment can be used for the construction of: frameless steel hangars aircraft hangars agricultural buildings grain and machinery storage buildings warehouses industrial buildings workshops garages livestock buildings sports facilities self-supporting steel roofs temporary buildings military and logistics storage facilities Mobile Production Directly at the Construction Site One of the main advantages of this technology is the possibility of producing the complete structural panels directly at the construction site. The main forming and curving equipment is installed on a mobile trailer chassis. The machine can therefore be transported to the building site, where steel coils are converted into finished structural arch panels. This is particularly important for long panels that would otherwise be difficult or expensive to transport. The supplied machine has two axles and eight tyres intended for movement around the construction site. Production Process The complete production process consists of several stages: Steel Coil → Decoiling → Straight Profile Forming → Cutting to Length → Curving → Panel Seaming → Lifting → Installation The supplied technical manual describes the machine as a combination of a roll forming section and an arch bending section, with electrically driven forming and bending and hydraulic cutting. Main Technical Specifications Parameter Specification Machine type Mobile arch sheet roll forming line Application Frameless / self-supporting steel buildings Feeding width 1000 mm Effective profile width Approx. 610 mm Material thickness 0.8–1.5 mm Forming stations 13 + 1 Straight panel forming speed Up to 15 m/min Arch panel forming / curving speed Up to 13 m/min Seaming speed Approx. 6 m/min Forming motor 7.5 kW Curving / bending motor 5.5 kW Cutting motor 4.0 kW Additional drive 3.0 kW Total installed motor power Approx. 20 kW Cutting system Hydraulic Cutting tool material Cr12MoV, heat treated Roll material 45# steel, chromed and hardened Roller hardness HRC 58–62 Control system PLC Machine dimensions Approx. 9000 × 2230 × 2200 mm Machine weight Approx. 9000 kg Chassis 2 axles / 8 tyres Different Profile Sizes Available The machine can also be manufactured for different structural profile dimensions according to the required building span and application Available configurations may include different: coil feeding widths finished profile widths profile depths steel thicknesses arch radii building spans For example, depending on machine configuration, profiles can be designed for relatively small buildings as well as large-span self-supporting arch structures Kdjdpoztwx Uefx Abnsr

Condition: used, mileage: 280,000 km, power: 265 kW (360.30 HP), first registration: 02/2000, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: green, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 2000, Equipment: power assisted steering, = Additional options and accessories = - Hub Reduction - Immobilizer - PTO - Sper = Remarks = MAN 33,364, 2000, Euro 2, 6x4 with hub reduction, Fully leaf-sprung, Manual transmission, Stainless steel tank, Kipper, No vacuum pump = More information = Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Reduction: hub reduction Kdedpey Ep Ulefx Abnor Rear axle 2: Double wheels; Reduction: hub reduction Number of cylinders: 6 Tipper: Back Price: On request = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: used, mileage: 245,000 km, power: 265 kW (360.30 HP), first registration: 02/2001, fuel type: diesel, axle configuration: 6x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro2, suspension: steel, Year of construction: 2001, MAN 33,364, 2001, 6x4 with hub reduction, Fully leaf-sprung, Manual transmission, Stainless steel tank, No pumps! = More information = Suspension: leaf suspension Front axle: Steering Rear axle 1: Double wheels; Reduction: hub reduction Rear axle 2: Double wheels; Reduction: hub reduction Price: On request = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Kdedpey Dppvofx Abnor Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Year of construction: 1999, condition: used, functionality: fully functional, 2 x 173 m³ storage silos made of stainless steel (material 1.4301) (formerly plastic granulate silo) Technical data / Dimensions Available quantity: 2 Volume: approx. 172,000 liters Container type: Silo Kedpfx Aexvtvuebnodr Condition: used Design: vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 17,500 mm Overall height: approx. 20,000 mm Weight: approx. 9,000 kg Specific weight of the medium: 0.6 tons/m³ Operating pressure: non-pressurized Ground clearance: approx. 500 mm Material / Properties Material of inner lining: Stainless steel Notes: Material: 1.4301 Support structure: Base ring / base flange Type of bottom: Conical bottom Slope: approx. 15% Type of bottom (lower part): Cone Cone angle: 60 degrees Top: 1 x roof edge railing, height: approx. 1,200 mm 1 x walkway with platform 2 x crane eyes 1 x manhole DN 600 1 x connection flange for level measurement 1 x welded-in nozzle for full level indicator 1 x flange DN 100 (filling) 1 x vent with cap Shell: 1 x operating room door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x filling line DN 100 ending in a TW connection 1 x welded-in adapter for empty level indicator Bottom: The silos end at the bottom in a 60° cone with an emergency shut-off valve and a mounted extraction spout (see photos). A three-section ladder with back protection and rest platforms is available as an option.