Used Steel Hall Construction for sale (32,216)

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater UDSA Gas-Fired Warm Air Heater – efficient, even at peak loads. The most well-known device from REZNOR is the UDSA gas-fired warm air heater, which ensures uniform air distribution in industrial halls. This easy-to-install unit is available in 14 power sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees uniform air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and innovative. With this generation of devices, halls can be heated in a particularly economical way directly – without a central heating system – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-fired warm air heater. The advantages: Efficiency of over 92% The unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation Hnjdpfx Aisx Ihiistju With CE system certification, version B or C Compact design for easy installation Uniform heat distribution Standard vertical and horizontal air deflection vanes Modulation of the heating output up to 50% EC technology ErP Ready These devices are directly heated gas-fired warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas-fired warm air heater, as well as the gas and exhaust connections, must only be carried out by an approved installation company. These gas-fired warm air heaters are suitable for: - Natural gas or LPG operation - Recirculation operation - Intake temperatures below 5°C with stainless steel heat exchanger * - Heating operation, 1-stage or 2-stage* control via room thermostat and heating control switch - Ventilation* control via ECOtronic TN - L* with day/night/week program - Exhaust gas extraction via roof, version B or C * - Exhaust gas extraction through the outer wall, version C * Gas-fired warm air heater type: UDSA015-4 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 7.80 mbar Max. rated heat input (Hs) QN: 17.60 kW Max. rated heat input (Hi) QN: 15.86 kW Max. rated heat output: 14.59 kW Min. rated heat output: Connection voltage: 230V 1N, 50Hz Air flow rate: 1360 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, Used Winkworth stainless steel ribbon blender. Approximately 550 litre working capacity (product dependent). Mixing trough measures approximately 1140 mm long x 815 mm wide x 1015 mm deep. Has stainless steel single interrupted ribbon with diameter approx 800 mm, driven by 5 HP, 1440 rpm, 380-440 V, 50 Hz electric motor through gearbox. Has stainless steel hinged lid on each side and safety mesh on one side. Includes off-centre bottom discharge. Hsdoykn T Sspfx Aitonu Specifications: Capacity: 550 L Construction Material: Stainless Steel Horsepower: 5 hp Dimensions: 44.8819 x 32.0866 x 39.9606

Condition: good (used), Reznor UDSA Gas-Fired Warm Air Heater Hedpfsx Ihg Ijx Aitenu UDSA Gas-Fired Warm Air Heater – efficient, even at peak performance The most well-known unit from REZNOR is the UDSA gas-fired warm air heater, which ensures even air distribution in industrial halls. This easy-to-install recirculating air unit is available in 14 performance sizes, from 7 to 97 kW, and consists of a heat exchanger, gas burner, and an exhaust gas fan. The combustion air can be drawn either from the outside or from the room, as standard. The UDSA warm air heater from REZNOR guarantees even air distribution in the heated hall. Its patented heat exchanger sets new standards in terms of flow behavior and heat transfer, ensuring an efficiency of over 92 percent. UDSA: compact, revolutionary, and groundbreaking. With this generation of units, halls can be heated in a particularly economical way – directly, that is, without central heating – using decentralized, modulating gas-fired warm air heaters. REZNOR UDSA Gas-Fired Warm Air Heater. The advantages: Efficiency of more than 92% Unit is also suitable for vertical mounting Low NOx emissions Innovative combustion concept Quiet operation With CE system certification, version B or C Compact design for easy installation Even heat distribution Standard vertical and horizontal air guide vanes Modulation of the heating output up to 50% EC technology ErP Ready These units are direct-fired gas warm air heaters with fan-assisted atmospheric multi-gas burners. The installation of the gas warm air heater, including the gas and exhaust connections, must be carried out by an authorized installation company. These gas warm air heaters are suitable for: - Natural gas or liquefied gas operation - Recirculating air operation - Intake temperatures below 5°C with a stainless steel heat exchanger * - Heating operation with 1 stage or 2 stages* Control via room thermostat and heating control switch - Ventilation° Control via ECOtronic TN - L° with day-night-week program - Exhaust gas extraction via roof, version B or C ° - Exhaust gas extraction through the outer wall, version C ° Gas warm air heater type: UDSA025-3 Gas appliance type: B22P-C12-C32-C52-C62 Intended use: DE Gas category: I2ELL Gas type: G20 Natural gas Connection pressure: 20 mbar Nozzle pressure: 8.20 mbar Maximum nominal heat input (Hs) QN: 30.08 kW Maximum nominal heat input (Hi) QN: 27.75 kW Maximum nominal heat output: 25.53 kW Minimum nominal heat output: Connection voltage: 230V 1N, 50Hz Air volume flow: 2385 m3/h Protection class: IP20 You can find more items – new and used – in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2014, 4 Qty Stainless Steel Hoppers 3 Qty Hoppers Dimensions 700mm x 1200mm x 1220mm H. 1 Qty Hopper dimensions 1200mm x 1200mm x 1220mm H Hnedpfx Asurf Twjiteu With manual gate valve Gas strut opening lid Internal stainless mesh screen Mobile on lockable castors Some with pneumatic vibration device. Some with level sensor device In excellent condition

Condition: excellent (used), total width: 3,245 mm, total height: 13,053 mm, 90m³ stainless steel tank with heating and a robust funnel DIMENSIONS: Hnjdpfx Aiozwm N Dstju - Diameter: 3.245 mm - Height: 13.053 mm Cylinder and bottom plate thickness: 3.1 mm Top plate thickness: 2.6 mm Steel grade: AISI304 (stainless steel) Year of manufacture: 2006 Weight: 4680 kg A DN 600 manhole with a hinged cover is located on the top. Stainless steel pressure-vacuum valve Downstream: DN400 manhole with hinged cover Stainless steel pressure-vacuum valve 1) Upper tank heating: 6 coils, exchange surface area 6.95 m², pressure drop 2 bar Above: 2 coils, exchange surface area 2.33 m², pressure drop 2 bar Device for transferring grounds, test valve 2) Lower tank heating: 4 coils, exchange surface area 4.64 m², pressure drop 2 bar Above: 2 coils, exchange surface area 2.33 m², pressure drop 2 bar. Level gauge Rectangular manhole 555x432 DN70 ball valve The tanks were used in the wine industry. The tanks have a technical drawing.

Condition: used, functionality: fully functional, Used electric forklift 1600 kg STILL RX 16-20 from 2017, free duplex 3370, footprint 2250mm 4th way, 2300 hours Hnedjz A Aayspfx Aitju

Condition: new, For sale: high-quality BOA compensating (flexible) hose made of stainless steel, designed for industrial applications. Hjdpfxez Smkwe Aitsnu 📋 Technical data: Manufacturer: BOA Type: SP20 (Ringwellschlauch) Nominal diameter: DN50 Length: 1100 mm Working pressure: PN16 Connections: flanged Material: stainless steel (INOX) Construction: corrugated hose + steel braid Certifications: DIN / VdS ⚙️ Applications: industrial installations water and gas systems heating and steam systems compensation of vibrations and thermal expansions protection of pumps and fittings 📦 Condition: New – old stock (NOS) Possible minor storage marks (visible in the photos). Product fully functional, unused. ✅ Advantages: high resistance to temperature and pressure very good flexibility durable stainless steel construction reduction of vibration and noise in the installation 📸 Included in the offer: Exactly what is shown in the photos.

Condition: new, Professional Stainless Steel Heavy-Duty Cabinet Extremely robust and deep stainless steel cabinet in top industrial quality. This is a special edition that is hardly available on the market in this generous size and depth! The cabinet is ideal for the food industry, commercial kitchens, butcher shops, laboratories, workshops, or discerning private users where hygiene, maximum storage space, and enormous stability are paramount. Thanks to the high-quality stainless steel construction, the cabinet is absolutely resistant to water, water vapor, food acids, as well as organic and inorganic acids. Rare special size: 1800 x 1500 x 670 mm (height x width x depth) – particularly deep design for maximum storage space, also ideal for large boxes and containers! Enormous load capacity: A substantial 200 kg load capacity per shelf (heavy-duty design). Flexible storage space: Includes 4 height-adjustable shelves to customize the shelf heights to your needs. Well-thought-out space division (3-door): Left & Right: Robust storage cabinets / material compartments with adjustable shelves. Center: Wardrobe compartment with integrated clothes rail and sturdy hooks for clean hanging of clothing or equipment. Hygienic base: Integrated, closed 150 mm U-shaped plinth. It completely seals the space to the floor – no dirt traps, absolutely flush with the floor, and easy to clean (HACCP compliant). Doors: Easy-to-open hinged doors with an ergonomic, continuous handle bar. "Everything from one source: We would be happy to offer you suitable bank financing for your project." Hnjdpjzwlnlofx Aitju More items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 1990, condition: used, Year of manufacture: Sep 2000 New: No Hsdevzyvpjpfx Aitsnu No guarantee. Please contact us if you can't find what you are looking for.

Condition: used, tank capacity: 50,000 l, total width: 3,600 mm, total height: 8,700 mm, Insulated 50m³ stainless steel tank with heating jacket and agitator Diameter: 3.60m Height: 7.20m + 1.50m agitator = total height 8.70m Hodezwm Nkepfx Aitonu The tank is insulated and lined with steel sheet. The heating strip is located in the lower half of the tank. The tank has a flat bottom. Gear motor power: 10 kW/15 kW. Mixing speed: approx. 20 rpm.

Condition: refurbished (used), Lime Slaker Machine, GV-2, Continuous Lime Slaker, Quick Lime Slaker, Used Machine Manufacturer : Construction Machinery Enterprise - License Type : GV-2 Country of origin: Bulgaria Hnedpezpxkqefx Aitsu Weight : 1,300 kg Capacity : For quick-slaking lime : 2 tonnes/hour For slow-slaking lime : 1.5 tonnes/hour Technical data : Drum speed : 10 rpm Electric motor : 8 kW, 68 rpm The machine structure and its components have been refurbished: Tank body and water jacket section, bearings, electric motor (new), machine frame. It has also received a new modern rotary joint on the water inlet side.

Condition: used, System Hall Moulder Infeed Table (2005) with Hydraulic Drive Hnedjz H I R Ejpfx Aiteu Used moulder infeed table for sale, manufactured by System Hall AB, Sweden. It consists of a chain cross transfer conveyor and an infeed section with pneumatic hold-downs, and it feeds timber into the moulder automatically and evenly. The hydraulic motors have had their seal kits replaced. Specifications: Manufacturer: System Hall AB, Falkenberg, Sweden Year: 2005 (CE) Overall length: 7.5 m Height: 1.85 m Infeed section length: 2.25 m Infeed section width: 0.9 m Drive: hydraulic (separate hydraulic power unit with electric motor), SEW gear motors Pneumatic cylinders for clamping and positioning Chain cross transfer with roller chains Included: hydraulic power unit, 4 toothed pulleys.

Condition: good (used), mileage: 686,922 km, power: 280 kW (380.69 HP), first registration: 04/2001, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x4, wheelbase: 3,200 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro3, suspension: steel, total length: 7,250 mm, total width: 2,550 mm, total height: 3,560 mm, Year of construction: 2001, Equipment: ABS, air conditioning, cruise control, electric window regulation, parking heater, power mirror, seat heater, = Additional options and accessories = - Heated mirrors - Tachograph (driver's control unit) - Fixed - Halogen lamp - Manual - Auxiliary drive - Space Cab - Fabric = Notes = Number of axles: 3, Configuration: 6x4, Unladen weight: 15410 kg, Gross vehicle weight: 26000 kg, Total tank capacity: 380 liters, Height of fifth wheel coupling: 129 cm, Fifth wheel coupling: Fixed, Number of differentials: 2, Winch pulling capacity: 725 tons, Suspension type: Leaf suspension, Type of cab: Space Cab, Cruise control, Tachograph (driver's control unit), Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Color: Blue, Heated mirrors, Lighting type: Halogen lamp, Seat heating, Flashing lights, Engine power: 280 kW (375 hp), Engine displacement: 12580 cc, Fuel: Diesel, Euro: 3, Transmission type: Manual, Transmission type: ZF, Gears: 16, Clutch pedal, Power steering, ABS, Auxiliary drive, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, FTT 6X4 FULL STEEL // BIG AXLES // MANUAL GEARBOX // EURO 3 // GERMAN TRUCK // ONLY 689TKM = Further information = Transmission Transmission: ZF, 16 gears, Manual transmission Axle configuration Brakes: Drum brakes Suspension: Leaf suspension Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 12 mm; Tire tread depth right: 13 mm Axle 2: Tire size: 295/80R22.5; Double tires; Tire tread depth left inner: 18 mm; Tire tread depth left outer: 18 mm; Tire tread depth right inner: 18 mm; Tire tread depth right outer: 18 mm Axle 3: Tire size: 295/80R22.5; Double tires; Tire tread depth left inner: 18 mm; Tire tread depth left outer: 18 mm; Tire tread depth right inner: 18 mm; Tire tread depth right outer: 18 mm Weights Unladen weight: 15,410 kg Payload: 10,590 kg GVW: 26,000 kg Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Identification License plate: KLEYN1 = Company information = Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of construction and price ranges. Why buy from Kleyn Trucks? It's simple! Hsdpfxsztv Tdo Aitjnu • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 Hnedsxdttpjpfx Aitju - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Available: at short notice

Year of construction: 2024, condition: new, Stainless Steel Mixing Machine: Intended for sauerkraut mixing with carrots, beets, salt, spices, also for salad, kimchi, powders, noodles, rice Drum is rotated by inverter motor 2.2 kW, with adjustable speed. The machine is solidly constructed and has a massive structure, made entirely of stainless steel. Mixing blades are screwed, and it is possible to replace them with a different shape of mixing blades. General Features: • Machine made entirely from high-quality stainless steel. Can mix high acidity products as fermented foods; • Volume 600 liters, in one load, can mix up to 300 kg of products; • Gentle mixing, minimal product damage. Very good for Sauerkraut,powder mixing; Hnodpfx Aiodv Ecwjteu • Can be used for Musli mixing. For other product, please, contact us; • Can be equipped with wheels with a fixation for easy transportation; • Easy to clean, can be washed with low-pressure water; • All food contact elements made of stainless steel; • Inverter motor can be rotated from 0-60 turns per minute; • Automatic product discharge; • Separate control panel from the machine; • Various electrical connections and standards available on request;

Condition: excellent (used), Two-chamber stainless steel tank 66m3 (40 + 26 m3) DIMENSIONS: - Diameter: 3,245 mm - Height: 13,053 mm Year of manufacture 2006 Weight: 4,680 kg Upper part: 40° slope - Lower part: 2% slope. DN 600 hatch with hinged cover at the top. stainless steel pressure-vacuum valve At the bottom, a DN400 hatch with a hinged cover a stainless steel pressure-vacuum valve Upper tank heating: 6 coils, exchange surface 6.95 m2, PS 2 bar Above 2 coils, exchange surface 2.33 m2, PS 2 bar A device for moving grounds, test valve Lower tank heating: 4 coils, exchange surface 4.64 m2, PS 2 bar. Above: 2 coils, exchange surface 2.33 m2, PS 2 bar. Liquid level gauge 555x432 rectangular hatch DN70 ball valve The tanks were used in the wine industry. Hsdpevlpctefx Aitjnu The tanks have a technical drawing. The tanks are dismantled and ready for delivery.

Condition: used, Perry is offering a high quality used Winkworth model ZX190-9 stainless steel mixer / extruder. Manufacturer: Winkworth Material: Stainless steel Year of Manufacture: 2018 Capacity: 190 litre (product dependent) Type Of Blades: (2) stainless steel wing blade shafts Motor: 11kw motor & gearboxes Also Includes: main electrical control panel - Separate ICS model i-Temp ci 90t 18 heating/cooling unit. - External jacket rated 3.5 bar design pressure at 250 deg.c. - Top mounted Coperion model P30-BV-150 vacuum sequencing receiver with rotary lock valve. This unit is ready to run. A video of this mixer is available below. Specifications: Capacity: 190 Litre Hjdozfh Uqopfx Aitonu Material of Construction: Stainless Steel Type Of Blades: 2

Condition: used, Used Babcock Gardner Type 100L 316 stainless steel ribbon blender. Approximate 100 litre working capacity. Mixing trough approximately 350mm wide x 500mm deep x 1000mm long. Single interrupted ribbon direct driven by a 1.5 kw 415 volt 3/50 1420 rpm motor through a David Brown GHT 2 gearbox with a ratio of 20.34/1 and an output RPM of 71.3. Specifications: Capacity: 100 L Construction Material: Stainless Steel Horsepower: 1.5 kW Jacket: No Hodszfh U Dspfx Aitsnu

Condition: used, 150m³ (1500hl) Stainless Steel Tank Grade AISI304 Wall Thickness: 2.2mm Bottom Thickness: 3.3mm Hjdpfx Aoxcxitjitenu

Condition: excellent (used), Conveyor Food Grade 316 stainless steel Hnedpoyw Tdkefx Aiteu Belt dimensions 1450mm x 700mm Overall dimensions 1450mm long x 900mm wide

Condition: used, Log Infeed System Manufacturer: Jack Steel Year of manufacture: 2019 Hydraulic log infeed system Twin-chain feed conveyor Electric control system Hodpezmf I Rjfx Aitjnu Suitable for feeding logs to sawmill or sorting lines

Condition: used, total width: 1,900 mm, total height: 6,500 mm, diameter 1.90m height 6.5m Hsdpezwm U Tefx Aitenu on legs and agitator

Condition: used, 50 m³ stainless steel tank With a flat bottom Hjdpjz Hv Ifsfx Aitsnu 7 units available: 5 units with a diameter of 3.55 m and a height of 5.50 m or 5.40 m (quantities for each variant to be confirmed upon delivery). 1 unit with a diameter of 3.00 m and a height of 8.40 m. 1 unit with a diameter of 3.00 m and a height of 7.10 m. NOTE! The tanks require a concrete pad or foundation (available from us at additional cost).

Condition: used, Comprehensively tested, used Kemutec approximately 400 litre working capacity (product dependent) 316 stainless steel ribbon blender. Trough measures approximarely 1680mm Long x 580mm wide x 700mm deep. Has stainless steel single interupted ribbon driven by 5.5kw motor & gearbox. Unit includes stainless steel hinged lid with clamps. Includes bottom discharge valve. Specifications: Capacity: 400 L Hodpoyma Dbjfx Aitenu Construction Material: Stainless Steel Horsepower: 5.5 kW Jacket: No

Condition: good (used), total height: 7,500 mm, outer diameter: 2,750 mm, 32000l Insulated stainless steel tank with a side-mount propeller agitator 8 kW power Diameter: 2.75 m Hnsdpfjzvwlgjx Aitsu Height: 7.5 m Slightly conical bottom It is placed on legs