Used Steam Sterilizer Autoclave for sale (1,019)

Condition: used, Year of construction: 1992, Technical details: max. temperature: 120 °C internal diameter: 980 mm internal length : 2580 mm external diameter: 1500 mm external diameter : 2740 mm Isdpfxsu Nz I Ts Ah Nstb wall strength: ca. 6,5 mm content: ca. 2000 l weight: 1425 kg Autoclave tank It is possible that this autoclave were built for the process of steam sterilization (according to operating parameters) The operating overpressure of +2 bar per room probably refers to the execution of the steam sterilization process, not to the pressure resistance of the container. - Permissible operating temperature 120 °C *

Condition: like new (used), Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) for the elimination or inactivation of pathogenic microorganisms. Iedox S Ipwopfx Ah Njtb Static autoclaves: these are suitable for any format and are used for food packaged in cans, jars and other flexible materials. CHARACTERISTICS: * Forced ventilation *Shower system. * Temperature and time recorder. CONSUMPTIONS: - Steam: Maximum flow rate 2100 kg/h. Approximate consumption 475 kg/cycle. - Electrical energy in KW: 22kw - Cold water in tn/hr: Flow rate 25m³/h. - Compressed air in m³/min. The theoretical required to cool the autoclave in the worst air requirement condition (empty or with low load) is 2.91 m³/minute. - Total amount of drainage in ton/day: Depends on the number of cycles. Approximately 0.8 m3/cycle will be drained from inside the autoclave at the end of the cycle. The water output of the exchanger will be the same as the water input during cooling, 25 m³/h. - Total raw water consumption in tn/day: 0.8 m³/cycle final + 12-16 m³ cooling.

Condition: like new (used), functionality: fully functional, Autoclaves are used for the sterilization of packaged products that need to reach high temperatures (+100ºC) to eliminate or inactivate pathogenic microorganisms. Static autoclaves: these are suitable for all formats and are used for food packaged in cans, jars, and other flexible materials. Inner diameter: 1,450 m. Characteristics: STEAM CONSUMPTION: - Steam consumption (6 Bar): 630 kg. Iedpfex S Ik Uox Ah Njtb - Flow rate: 2,000 kg/h. COLD WATER CONSUMPTION: - Consumption (4 Bar): 12 m³ - Flow rate: 40 m³/h. COMPRESSED AIR CONSUMPTION: - Consumption (6 Bar): 16 Nm³ - Flow rate: 160 Nm³/h. TUBULAR HEAT EXCHANGER: - Make: STERIFLOW - Model: HEAT EXCHANGER IJMS - Capacity: 170 L. - Surface area: 17 m².

Condition: new, Year of construction: 2006, functionality: fully functional, Equipment: documentation/manual, We offer a complete, unused boiler system with biomass boiler, fuel supply, ash removal, and control cabinet. Manufacturer: Danstoker Denmark Type: Multi 21 3-TRAEK Iedpsx S H E Rjfx Ah Njtb Output: 2.5 MW (maximum rated output 2775 kW) Year of manufacture: 2006 Water temperature: 110 °C Operating pressure: 3.5 bar The boiler and all other equipment have not yet been installed or commissioned. The equipment is stored in a warehouse. A complete package for your boiler room. All necessary manuals and documentation are included.

Condition: like new (used), functionality: fully functional, The static autoclave bases its sterilization system on the heat and cold transmission system by means of a water cascade. This autoclave is suitable for products that do not require movement during the sterilization process. The water, by means of a pump, is passed through a stainless steel plate exchanger for indirect heating. The heating and cooling of the water, which we use in all the cycles of the process, is carried out in the plate heat exchanger by means of steam or cold water. PRODUCTS: CANNED VEGETABLES, PASTA, PRE-COOKED FOODS, JUICES AND BEVERAGES, MEAT PRODUCTS, PATES, CANNED FRUIT, FISH. Features: Diameter: 1380mm. Basket: 1X0.99X0.93m. Heat exchanger. Automated loading and unloading. Operation by waterfall system. Control panel. Itedpswn Hgtefx Ah Neb Valves.

Condition: ready for operation (used), Year of construction: 2015, A lightly used Clayton quick steam generator including water treatment in container design is available. Operating overpressure: 10bar, operating temperature: 184°C, pressure vessel volume: 235l, heating surface: 27.5m², steam capacity: 1253kg/h, output: 786kW, test pressure: 15bar, fuel: natural gas H, fuel heating value: 33200kJ/Nm³, burner output min./max.: 281kW/843kW, max. gas pressure regulator/burner: 40mbar/25mbar, nominal gas flow: 91.4Nm³/h. Overall system dimensions X/Y/Z: approx. 6300mm/2450mm/3000mm, weight: approx. 6000kg, operating hours: under 4000h. The system was tested at the end of 2023 and in mid 2024. Documentation available. On-site inspection is possible. Iedpfxsx Srphj Ah Netb

Condition: new, Year of construction: 2019, functionality: fully functional, total length: 6,000 mm, total width: 1,800 mm, Industrial vacuum and pressure impregnation plant designed for efficient and uniform wood treatment. Itjdpfx Ahjx Sdpte Nob The T10 features a Ø1,800 mm × 6,000 mm autoclave, handling 8–9 m³ of timber per charge, with operating pressure up to 15 bar (abs). The plant is fully automated via PLC, enabling precise control of vacuum, pressure, time and preservative absorption. Built to EN 13445 standards with third-party inspection, it is suitable for modern chrome- and arsenic-free preservatives. Complete system includes pressure vessel, working tank, vacuum and pressure pumps, cleaning system, trolley loading system and safety features. Ideal for sawmills and industrial wood processors seeking reliable, high-quality impregnation performance. Technical specifications available on request.

Year of construction: 2025, operating hours: 260 h, condition: like new (used), functionality: fully functional, The autoclave material is Q345R, outside with special insulation - rockwool 80 mm thickness. The heating way is electric air heating, in the autoclave there are heating pipes, distribute in the left and right of the autoclave (energy and electric saving), heating power is about 36 KW totally. Fan inside the tank with the electrical engine outside of the autoclave (water cooled) Design vacuum function, 14 vacuum ports equipped with the vacuum pipes and related fittings and vacuum gauges. The tank is equipped with a frame style inside trolley. Specifications: Itedsx Sctdjpfx Ah Nob - 2000 mm internal working length and 1200  mm internal working diameter - door with the locking system (manually and piston controlled by the control unit  - the second check for the closed door and opening door) - Working pressure max. 8 bar (tested for the 13 Bar) - Adjustable AIR - max. working temperature 210 °C - Air volume 2770 litres - weight 1395 KG - water cooling system after the process is done to cool down temperature - 2 ports for the valve for the Pressurizing - 2 port for the valves for the de- pressurizing - 1 port for the temperature controller (PT 100) - 1 port for the maximum temperature controller - 1 port for the analog manometer - 1 port for the electric sensor manometer - 1 port for the vacuum sensor The autoclave design safety interlocking device, has been passed the identification by technician supervision and the certificate is held. The control unit and the electrical system is also tested and the certificate is given. All functions of the autoclave are displayed and controlled by the control unit on the monitor. The unit is fully programable for the different temperature and pressure rising in time. It also gives the report to your PC of the process after the process is done if you need.

Condition: excellent (used), Year of construction: 2014, Autoclave Systec VX-100. The device has only undergone testing phases. Fully automatic, microprocessor-controlled system covering 12 programs: 1-3 Solids Isdpsx R Emkjfx Ah Netb 4-5 Waste destruction bags 6-7 Liquid waste 8-11 Liquid media 12 Cleaning • Integrated separate steam generator (no heating elements in the sterilization chamber) • Innovative safety ring closure system with lip seal • Steam temperature and pressure up to 140°C / 4 bar absolute pressure, extendable to 150°C / 5 bar absolute pressure • Thermal lock: door locking system controlled by pressure and media temperature according to pressure vessel regulations • Flexible PT-100 temperature sensor for reference vessel • Sterilization time controlled by media temperature • Electronic pressure transducer for monitoring pressure and temperature • “Autofill” – automatic dosing of demineralized water for steam generation • Special waste destruction program with pulsed heating for better ventilation of waste bags • Timer start / programmable delayed start • Outlet steam condensation, water-cooled, thermostatically controlled • Common manifold connection for all outputs • Drain valve • Base plate for tanks, baskets, etc. • Validation port • RS 232 interface for external data transfer • Prepared for subsequent printer installation • Prepared for subsequent fast cooling installation • Prepared for subsequent vacuum system installation • Prepared for subsequent drying installation • Safety switch for low water level • Safety switch for overtemperature Options installed in the autoclave: Autoclave: VX-100 (Y-1100), ch+w, w, p, s, K, SAPL ch – cooling water cooling – ch+w vacuum – p drying – s compressor – k SAPL – system.

Year of construction: 2001, condition: excellent (used), Used steam boilers Manufacturer: LOOS Type:U-HD Year of manufacture:2001 Steam capacity:350 kg/st Working overpressure:13 bar Iedpfx Aeizz U Djh Netb Burners available in different versions. Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: used, Year of construction: 2003, Steam boiler used Manufacturer: Viessmann Type: Vitomax 200 Year of manufacture 2003 Nominal heat output: 375kw Boiler water capacity:1400l Operating overpressure: 8 bar Gas burner Weishaupt G/1E -Version ZMD-LN Itedpefm E Ifofx Ah Njb Power 80-550KW: year of construction: 2003 Connection pressure 15-500mbar. With existing fittings Dungs DN40 Мы говорим по русски! Visits please only after telephone arrangement! Preferred sale to dealers, tradesmen or export. All information without guarantee, errors and prior sale reserved. The seller is not liable for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Year of construction: 1998, condition: excellent (used), Steam Boiler Used Manufacturer: LOOS Itodpfsiz Adwex Ah Nsb Type: UH-D Year of construction: 1998 Steam capacity: 1250 kg/h Weishaupt burner is available in several variants Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Year of construction: 2002, condition: excellent (used), Steam Boiler Used Manufacturer: LOOS Type: UF Year of construction: 2002 Steam capacity: 600 kg/st Operating overpressure: 6 bar Burner Weishaupt WG40N/1-A Design: ZM-LN Power: 55-550KW Year: 2002 Connection pressure: 15-500mbar. Iodpeizxbusfx Ah Nstb Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Year of construction: 1996, condition: excellent (used), Used condensate vessel Manufacturer: Gestra Year of manufacture: 1996 Мы говорим по русски! Viewing please only after telephone agreement! Isdeiz A Tzspfx Ah Njtb Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Of course we also take care of all formalities Loading possible

Year of construction: 1996, condition: excellent (used), Steam Boiler Used Manufacturer: LOOS Year of manufacture: 1996 Steam capacity: 500 kg/h Weishaupt gas burner G3/1-E Type: ZD-NA Power: 80-550Kw Year: 1996 Weishaupt burner is available in several variants Itedpfx Asiz S Sujh Nsb Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible

Condition: excellent (used), Omnical 6000kg/h -13Bar. Year 2005 Itsdohtf A Uopfx Ah Nob

Condition: used, functionality: fully functional, SECOND-HAND STEAM TANK LENGHT MM. 2100. DIAM. 700 Itjdpfx Asx Rrrgjh Neb

Condition: reconditioned (used), convotherm 20.10 C4 Oven after complete overhaul. Fully operational, ready for use. Power: 38.9 kW, 56.2 A, 400 V. Iedpfx Ahex Rpqms Notb

Condition: used, This Listing is for a refurbished Laboklav 80 MV Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Iodpfx Ahexx Aqae Notb Vertical device, 80l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 740 x 915 x 600 chamber dimensions (Ø x d in mm) 410 x 610 Steam generator 6,6kW Vacuum incl. pre- and postvacuum, heating during postvacuum Fast re-cooling with double jacket 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality

Condition: used, This listing is for a refurbished Laboklav 25B Autoclave Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Horizontal device, 25l, glass lid Isdpfx Ahexx Anxe Netb Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 440 x 540 x 660 Chamber dimensions (Ø x d in mm) 265 x 465 Steam generator 2kW 1N 230V, 50Hz, 16A Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality

Condition: used, This listing is for a Microwave Laboratory Systems MLS Milestone traceClean Itsdpfxexzh E Uo Ah Nob The traceCLEAN operates as a fully automated, self-contained acid steam cleaning system. Items to be cleaned are placed inside the unit, where freshly distilled acid vapors (typically nitric or hydrochloric acid) are generated and continuously refluxed within a sealed chamber. This process effectively leaches any metal contaminants from the surfaces of the items. After the cleaning cycle, the items are cooled, dried, and stored until needed

Condition: used, This listing is for a refurbished Laboklav 135M Autoclave 2018 Incl. commissioning in UK. (outside the UK is possible also, please request and we will try and accomodate) Vertical device, 135l, can be changed to horizontal version (stand required) Sterilisation temp. 98-135°C Outer dimensions (w x h x d in mm) 840 x 965 x 700 Chamber dimensions (Ø x d in mm) 500 x 660 Steam generator 10kW Fast re-cooling with double jacket 3N 400V, 50 HZ, 16A, CEE plug Refurbished according to manufacturer's specifications: Reconditioning of pressure vessel incl. pressure test, maintenance incl. spare parts (filter, valves, seal, etc.) According to requirements: Update of cable tree, steam generator, control system and software to the current status. Test runs to ensure and check functionality Isdpfxjxx Aqmj Ah Netb

Year of construction: 2002, condition: used, This listing is for a WFI System with 2 Mueller Clean Steam Generators. The system was installed in 2002, is in working condition, and is ready for immediate use. ----- System Overview A complete Water For Injection (WFI) production, clean-steam generation, and storage system for pharmaceutical or biotech facilities. Produces ultra-high purity water and clean steam using dual Mueller steam generators, pressure columns, UV filtration, and automated control via a Pharma Tec panel. ----- Main Components Mueller Clean Steam Generators ×2 – dual units producing clean / pure steam for WFI and sterilization duties. Four Pressure Columns – separation, purification, and holding of steam / condensate under controlled pressure. Fristam Pumps – sanitary main supply pumps providing feedwater or circulation through the system. Hanovia UV Filters – ultraviolet sterilizing filters to remove microbiological contamination from feedwater or WFI stream. Pharma Tec Control Panel – automation and control system with PLC, level, temperature, pressure, and conductivity monitoring; full alarm & data-logging. ----- Key Features Dual redundancy via two clean steam generators allows maintenance or alternating load without shutdown. Four pressure columns improve separation, holding and stability of steam / condensate under varying pressure loads. UV filtration ensures microbiological safety in line with regulatory requirements. Sanitary pumps (Fristam) for clean design, ease of clean-in-place, and high hygiene. Automated control panel (Pharma Tec) providing precise monitoring, control, and regulatory compliance. ----- Specifications Manufacturer: Mueller, Fristam, Hanovia / Pharma Tec Year Installed: 2002 Itodexv Aaiepfx Ah Nsb System Type: Clean Steam + WFI generation & storage Steam Generators: 2 × Mueller Clean Steam Generators Prize Pumps: Fristam sanitary feed / supply pumps Filtration: Hanovia UV sterilisation units on feed / WFI lines Control: Pharma Tec PLC / automation panel with full instrumentation (pressure, temperature, level, conductivity) Operating Conditions: Designed for pharmaceutical WFI-grade water and clean steam (sterile / pyrogen-free)

Year of construction: 2014, condition: used, This listing is for a Mueller PyroPure P4003 Pure Steam Condensing System. The unit is in full working condition and is ready for immediate release. This Unit was installed new in 2015 by Freestead Process Technology. This Unit is fitted with a Allen Bradley Compact Logix PLC and Panel View plus 1000 HMI's- Product Overview: The Mueller P4003 is a high-capacity pure steam condensing system, part of the trusted PyroPure series. Designed for pharmaceutical manufacturing, this system produces pyrogen-free and endotoxin-free water-for-injection (WFI) by condensing pure steam. Built to meet or exceed U.S. Pharmacopoeia (USP) standards for WFI, as well as CE marked and FDA compliant with 3.1B material certification. It is a versatile solution for facilities requiring both pure steam and WFI quality distillate. Its robust design and advanced features ensure reliable operation, compliance, and minimal maintenance. Key Specifications: Model Number: P4003 Capacity: 100 gallons per hour or 379 litres per hour of WFI-quality distillate. Pure Steam Inlet: 807 pounds per hour or 366 kilograms per hour. Coolant Requirement: 978 gallons per hour or 3702 litres per hour. Pure Steam Output Compliance: Pyrogen-free and endotoxin-free, meeting USP WFI standards. Core Features High-Quality Output: Produces pyrogen-free steam and WFI-quality distillate, ideal for pharmaceutical-grade applications. Utilizes a tangential nozzle design for optimal impurity separation in the pure steam generator. Efficient Design: Fully drainable components eliminate contamination risks and ensure clean operation. Electro-polished 316/316L stainless steel with a maximum surface roughness of 20 Ra for all product contact areas. USP Class VI-certified elastomers for enhanced safety and regulatory compliance. Ease of Maintenance: Removable tube bundle in the condenser allows for easy cleaning and inspection of critical surfaces. Requires only 24 inches of clearance on all sides for service and maintenance. Minimal instrumentation with just one control loop simplifies operation and reduces potential downtime. Installation Flexibility: Can be integrated with a PyroPure pure steam generator for dual production of pure steam and WFI. Optional stand-alone design for remote installation at the point of use, adding versatility to your setup. Ijdpfexv Agcsx Ah Notb Applications: Pharmaceutical Manufacturing: Sterile environments, autoclave processes, and critical cleaning procedures. Biotechnology: Providing WFI for sensitive biological processes. Healthcare: Humidification and sterilization in clean rooms or hospital sterilization units.

Condition: used, This listing is for a MMM Stericell Hot Air Sterilizer. Ijdpfx Ajxzg N Esh Nstb Good working and cosmetic condition. The STERICELL® hot air sterilizer is intended for use in healthcare for the hot air / dry heat sterilization process of non-packaged and packaged medical devices, including invasive devices designed by their manufacturers for hot air / dry heat sterilization.