Laboklav 80 MV Autoclave Refurbished

Laboklav 80 MV

Condition: like new (used), Year of construction: 2023, machine/vehicle number: SN432511, functionality: fully functional, power: 75 kW (101.97 HP), input voltage: 400 V, input current: 108 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,340 °C, inner dimension length: 1,000 mm, inner dimension width: 800 mm, inner dimension height: 1,250 mm, total length: 1,800 mm, total width: 1,900 mm, total height: 2,500 mm, overall weight: 2,800 kg, number of chambers: 1, control type: PLC-controlled, actuation type: electric, Equipment: CE marking, documentation/manual, with 12 months warranty -Internal dimensions (w x d x h): 800 x 1000 x 1250 mm -External dimensions (w x d x h): 1790 x 1900 x 2500 mm -Control cabinet (w x d x h): 1200 x 500 x 2350 mm -Controller cabinet (w x d x h): 600 x 900 x 1850 mm -Capacity: 1000 liters -Maximum temperature: 1340 °C Hodszbr U Uopfx Ab Uofn -Siemens PLC control system H1700 (100 programs, each with 20 segments) -Nabertherm NCC, computer-aided, extremely user-friendly control system, recording of all parameters. Recordings can be processed, supplemented with batch data, etc., and archived and printed. -Printer and UPS integrated in the controller cabinet -Automatically generated report after each heating cycle -Thyristor-controlled -2 opposing, lockable doors with safety interlock -5-sided heating -Manual air inlet damper -Motorized exhaust damper -Stainless steel exhaust hood with pipe connection flange -Calibrated control thermocouples for the three heating zones -Temperature accuracy: ± 15 °C from 500 to 850 °C, ± 10 °C above 850 °C, all values according to DIN 17052-1 in the empty working space, without recording -Separate control cabinet -Audible alarm and alarm light -Overtemperature limiter -Power: 75 kW -Oven weight approx. 2320 kg + control cabinet + controller cabinet -DGUV V3 test currently valid with report -Documentation, CE declaration, circuit diagrams The oven is in TOP condition. It has been used for approximately 10 months in a cleanroom for the production of implants and is of high quality (new price 100,000 EUR net) and absolutely clean. We would be happy to offer installation and commissioning as well as training for your employees. Please contact us! We offer new and used industrial furnaces. Inspection in our warehouse upon request! Chamber furnace, furnace, kilns, annealing furnace, firing furnace, hardening furnace, heat treatment furnace, tempering furnace, enameling furnace, drying oven, industrial furnace, ceramic furnace, tempering furnace, sintering furnace

Condition: used, scrubber dryer, floor cleaning machine, mop machine Hfsdpjc R S E Sjfx Ab Usn -Handover in the current condition as inspected -Device is without battery brush and suction bar -Working width: 500 mm -Charger -Quantity: 1 piece available -Dimensions: 1150/520/H950 mm -Weight without battery: 66 kg

Year of construction: 1990, condition: good (used), Compressor system with air dryer and compressed air tank. Hedpjinur Aofx Ab Usfn Length: 800mm Width: 800mm Height: 1000mm Volume: 1.5m³/min Power: 11kW

Condition: used, Year of construction: 2025, operating hours: 21 h, functionality: fully functional, Powerful ride-on scrubber dryers in top condition for sale! The machine is in very good condition and ready for immediate use. Condition: Used, very good Operating hours: 21 hours Year of manufacture: 2025 SCHORR SCRUBBER DRYER 24V FLOOR MOP SCRUBBER 100AH SCRUBBER Efficient floor cleaning combined with extremely easy handling. Restore the shine to your hall! The fully electric ride-on scrubber dryer from SCHORR makes cleaning large hall areas much easier, especially due to the machine's excellent maneuverability. The steering angle is 90°, so pillars or narrow spaces, for example, are no problem. No special training is required to operate the machine. Simply fill it, get on, and drive off. With the built-in 100Ah batteries, intensive continuous use of approximately 4 hours is possible. The batteries are conveniently charged using the included charger at a standard 230V household outlet. SCHORR SCRUBBER DRYER RR1030FS – DISCOVER THE BENEFITS: -- Fully electric scrubber dryer with a 1030mm working width – ideal for large halls and rooms -- Up to 4500m²/h cleaning performance -- 80-liter fresh water tank and 85-liter waste water tank -- 510mm brush diameter -- Powerful 24V 100AH batteries -- Extremely robust and reliable Technical Specifications Hfedswh Ri Espfx Ab Usn Manufacturer (abbreviation): SCHORR Manufacturer's model code: RR1030FS Drive: Seated Suction motor power: 500W Brush motor power: 500W Drive motor power: 500W Operating time: approx. 4 hours Number of wheels: 3 Tires: PU (non-slip) Weight: 250kg Basic dimensions Volume Fresh water tank: 80L Dirty water tank volume: 85L Brush diameter: 510mm Overall length: 1400mm Overall width: 1030mm Overall height: 1100mm *Further technical specifications are available upon request. The ride-on scrubber-dryer is designed to be user-friendly, making the cleaning process as straightforward as possible. The intuitive control panel allows for easy control of all functions, so even inexperienced users can quickly get to grips with it. The ergonomic seat and clear view of the cleaning area allow you to work comfortably and efficiently. The large 80-liter fresh water tank and 85-liter waste water tank ensure long cleaning intervals without the need for frequent refilling or emptying. The machine is easy to maneuver and ideal for use in large areas. Of course, we usually have all spare parts in stock and can deliver them quickly should you ever encounter a problem. Should you need technical support, we have the necessary technical expertise and can also carry out repairs in our in-house workshop. We at SCHORR are happy to answer any questions you may have about our ride-on scrubber-dryer. You can reach our competent team by phone or email. We look forward to hearing from you and assisting you with your needs.

Condition: good (used), Year of construction: 1989, for twist drills: 3 - 50 mm Ø Point angle: 90 - 140° Hjdpfxex Ea Nmo Ab Uefn Adjustable relief angle Grinding motor: 2800 rpm, 0.25 kW Gear motor for swing motion: 0.12 kW Grinding wheel dimensions: 175 x 32 x 20 / 90 x 20 mm Space required: 800 x 550 x 1140 mm Weight: 120 kg

Year of construction: 2008, condition: like new (used), functionality: fully functional, GETINGE GEVC 6712 AC-1 Hedpev Iz H Nofx Ab Usfn ID.NO. 2921 Getinge mod GEVC 6712 AC-1 Autoclave with associated steam generator. The system has previously been used in medicine & is in new condition! Dimensions 127 x 160 cm H 215 cm.

Condition: repair required (used), Year of construction: 2004, Schneider compressed air screw compressor defective System needs to be repaired. Machine is being sold cheaply because it needs to be repaired. Hfodpfx Abovmivcj Usn Engine power: 11 KW Volume flow: 1500 liters/min Compressor pressure: 10 bar Location: from warehouse 54634 Bitburg Machine is being sold as defective Without guarantee - without warranty -

Condition: used, Mettler Toledo Type: DSC 3 STARe System Mettler Toledo DSC 3 STARe System FRS5+ Sensor Thermal Analysis + Accessories Service / Maintenance: Last maintenance by Mettler Toledo: 04/08/2025 Next maintenance due: 04/2027 Unit currently in service Professional thermal analysis system (high-end laboratory device) Differential Scanning Calorimetry (DSC) Ideally suited for: Research • Development • Quality assurance • Material testing The device comes from a professional laboratory environment and is in well-maintained, used condition. Your benefits at a glance: High-precision thermal analysis FRS5+ high-performance sensor Complete system incl. PC & software Incl. precision balance Extensive accessories package Incl. DSC 500 accessories kit Device functions: With the DSC 3, the following thermal properties can be investigated, among others: Hfsdpfxsy Drl He Ab Usn Melting point / glass transition Crystallinity & phase transitions Heat capacity (Cp) Reaction kinetics (curing, crosslinking, decomposition) Purity determination Oxidation induction time (OIT) Thanks to the FRS5+ sensor, the device offers very high sensitivity, stability, and reproducibility. Technical data: Model: DSC 3 STARe System Design: DSC3/500 Sensor: FRS5+ Oven power: 200 W Cooling: Air cooling / fan Lid: Automatic Power connection: 230 V AC / 50–60 Hz Fuse rating: 6 A Line output max.: 600 VA Software: STARe Software (V16.30) Operating system: Windows 10 Dimensions (approx.): 60 x 55 x 55 cm Weight (approx.): 55–65 kg Evaluation unit / PC: Dell Optiplex control PC with monitor Windows 10 installed STARe Software V16.30 Additionally included: Thermal analysis package DSC3/500 DSC 500 accessories kit Crucible sealing device Mettler Toledo precision balance (analytical balance) Measuring range: 42 g / 120 g Readability: 0.01 mg / 0.1 mg Scope of delivery: Mettler Toledo DSC 3 main unit Touchscreen control unit FRS5+ sensor Control PC (Dell Optiplex) with monitor DSC 500 accessories kit Crucible sealing device Precision balance Accessories according to pictures Extensive documentation & training materials Several folders (STARe System, E-DOC, EDU packages) USB sticks / data carriers Important: The images are the sole basis for the scope of delivery. Important note: The table shown in the photos is not included in the sale. Condition: used, like new Commercial sale Invoice with VAT possible (Subject to changes and errors in the technical data!) If you have any questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 70.25 kW (95.51 HP), type of input current: three-phase, type of cooling: air, overall weight: 720 kg, input voltage: 400 V, total width: 1,200 mm, total length: 2,400 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 73.12 kW (99.42 HP), Aircooled chiller/Heat pump Climaveneta NR N LN CA 0262P 70.25 kW/73.12 kW Cooling capacity: 70.25 kW / 19.98 tons (12/7 — 35°C) Heating capacity: 73.12 kW / 20.79 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP154KCE-TFD-477 (scroll) Type of refrigerant: R410a Number of fans: 6 pcs. Dimensions: 2.4x1.2x2 m. Weight: 720 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. Dot Eboxwmwustm Noup After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. Hfsdpfx Abjv Rp Itj Uon The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: used, Evaporator GEA KUBA Hedpfey Endzox Ab Ujfn -Type: SGB 63-F62 -Cooling capacity: 33.3 kW at DT8, 26.6 kW at DT7 -Fin spinning: 7 mm -We have 10 pcs with electric heaters and 7 pcs without heaters -Fans: 2 x 630 mm -Dimensions: 3020 x 850 x 1000 mm -Refrigerant: Freon -Volume: 45 L -Quantity in stock: 17 -Stock number: CH 599 -Condition: Used in very good condition, evaporator 100% tight, fans working, ready to work