Used Start Hole for sale (9,960)

Condition: used, mileage: 39,412 km, power: 74 kW (100.61 HP), first registration: 06/2024, fuel type: gasoline, overall weight: 2,175 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 4,825 mm, total width: 1,845 mm, total height: 1,861 mm, loading space length: 1,967 mm, loading space width: 1,197 mm, loading space height: 1,261 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale reserved! Internal number: 0896. RA77000 ----EQUIPMENT * Airbag: Front airbag for passenger - Front airbag for passenger including deactivation function and glove compartment with lid * Cruise control - with adjustable speed limiter including multi-function leather steering wheel with 4 spokes in aluminum trim * Load compartment lighting, LED * Rear parking pilot system * Transmission: 6-speed manual * ABS with EBD * Airbag, driver's side * Exterior mirrors, electrically adjustable and heated Djdo Aic N Hepfx Alfewd * Exterior mirrors, narrow mirror design * Battery, reinforced * Hill start assist * Floor covering, rubberized, front * On-board computer including outside temperature display * Third brake light * Roof storage compartment at the front, across the entire interior width, including side grab handles * Double-wing rear door without window * Rev counter * Electronic Stability Program (ESP) with Traction Control (TCS) including Torque Vectoring Control and adaptive load control * Front power windows - with quick-down function for driver's side * Ford Easy Fuel - convenient fuel filler cap and misfueling protection * FordPass Connect - Information on the current condition or location of the vehicle as well as control of selected vehicle functions via smartphone with the FordPass app - including WLAN hotspot * Glove compartment with lid * Interior lighting at the front with delay function * Air conditioning at the front including semi-electronic recirculation function * Paint: Solid color * Load compartment protection, plastic, molded * Load compartment cladding, laterally, half-height * Steering column, adjustable in height and reach * Alternator/generator * Center console, front - open with storage area, 2 cup holders * Fog lights * Emergency brake light - hazard warning light activation during hard braking * Gasoline particulate filter (OPF) * Radio: Ford Audio System 2 - Radio DAB/DAB+ - Radio (FM/AM) - USB port - Bluetooth interface - Audio remote control on the steering wheel * Sliding door at the rear, right * Side protection strips, plastic * Power steering, electro-mechanical EPAS (Electric Power Assisted Steering) * Safety brake assist EBA - Emergency Brake Assist * Seat belts - Seat belt pretensioners and force limiters at the front - Warning system for unbuckled seat belts for driver and front passenger * Automatic door locking, automatic (45 seconds) - Automatic relocking if no door is opened within 45 seconds after unlocking via remote control * Seats: Seat Package 4 - Driver's seat, 3-way manually adjustable (forward/backward, height, backrest) - Single passenger seat, 2-way manually adjustable (forward/backward/backrest) - Headrests, height-adjustable - Lumbar support, manual (driver's seat) - Fabric "Capitol/City" in Ebony (black) * Sun visors for driver and front passenger * Start-Stop system * Dust and pollen filter * Socket: 12-volt connection on center console at the front * Front bumper and rear bumper end caps painted in body color * Daytime running lights * Partition to the load compartment without window * Child safety lock on sliding doors * Door handles, black * Tie-down points * Engine immobilizer, electronic (EPATS) * Heat-insulating glazing, slightly tinted * Central locking with remote control ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale reserved. We will gladly take your vehicle in part exchange. Financing/leasing is a

Condition: used, mileage: 19,986 km, power: 74 kW (100.61 HP), first registration: 01/2025, fuel type: gasoline, overall weight: 2,175 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 4,825 mm, total width: 1,845 mm, total height: 1,861 mm, loading space length: 1,967 mm, loading space width: 1,197 mm, loading space height: 1,261 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0912. RA77027 ----EQUIPMENT * Airbag: Front airbag for passenger - Front airbag for passenger including deactivation function and glove compartment with lid * Cruise control - with adjustable speed limiter including multifunction leather steering wheel with 4 spokes in aluminum decor * Cargo area lighting, LED * Rear parking pilot system * Transmission: 6-speed manual * ABS with EBD Dodpfs Aic Rcsx Alfswd * Airbag, driver side * Exterior mirrors, electrically adjustable and heated * Exterior mirrors, narrow mirror design * Battery, reinforced * Hill start assist * Floor covering, rubberized, front * On-board computer including outside temperature display * Third brake light * Roof storage compartment in the front, running across the entire interior width, including side grab handles * Double-wing rear door without window * Rev counter * Electronic Stability Program (ESP) with Traction Control (TCS) including Torque Vectoring Control and adaptive load control * Power windows, front, electric - with quick-down function for driver's side * Ford Easy Fuel - comfort fuel filler cap and misfueling protection * FordPass Connect - information about the current status or location of the vehicle, as well as control of selected vehicle functions via the smartphone with the FordPass app - including WLAN hotspot * Glove compartment with lid * Interior lighting, front with delay function * Air conditioning, front including semi-automatic recirculation * Paint: Solid color * Cargo area floor protection, plastic, molded * Cargo area lining, side, half-height * Steering column, adjustable in height and reach * Alternator/generator * Center console, front - open with storage area, 2 cup holders * Fog lights * Emergency brake light - hazard warning light activation during heavy braking * Gasoline particulate filter (OPF) * Radio: Ford Audio System 2 - Radio DAB/DAB+ - Radio (FM/AM) - USB port - Bluetooth interface - Audio remote control on the steering wheel * Sliding door, rear, right * Side protection strips, plastic * Power steering, electro-mechanical EPAS (Electric Power Assisted Steering) * Safety brake assistant EBA - Emergency Brake Assist * Seatbelts - Seat belt pretensioners and force limiters, front - Warning system for unbuckled seat belt for driver and passenger * Automatic central door locking (45 sec) - Automatic re-locking if no door is opened within 45 seconds after unlocking via remote control * Seats: Seat package 4 - Driver's seat, 3-way manually adjustable (forward/backward, height, backrest) - Single passenger seat, 2-way manually adjustable (forward/backward, backrest) - Headrests, height-adjustable - Lumbar support, manual (driver's seat) - Fabric "Capitol/City" in Ebony (black) * Sun visor for driver and passenger * Start-stop system * Dust and pollen filter * Socket: 12-volt connection on center console, front * Front bumper and rear bumper end caps painted in vehicle color * Daytime running lights * Partition to the cargo area without window * Child safety lock on sliding doors * Door handles, black * Tie-down points * Immobilizer, electronic (EPATS) * Heat-reflective glazing, lightly tinted * Central locking with remote control ... and more ----The vehicle has not been detailed! Nationwide delivery possible for an additional charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / Leasing also possible without a down payment! Do you have any further questio

Condition: used, HERBERT 9C-30 TURRET LATHE MAKE HERBERT, MADE IN ENGLAND MODEL 9C - 30 MAX DIAMETER OVER BED 762.0 mm CHUCK TYPE 4 JAW CHUCK SIZE 630.0 mm MAX DIAMETER OVER CROSS SLIDE 535.0 mm Dwjdpfxsy H Hc Eo Alfod MAX DIAMETER IN FRONT OF CROSS SLIDE 737.0 mm LENGTH BETWEEN CHUCK FACE -TURRET FACE 1505.0 mm TRAVEL OF TURRET 1066.0 mm DIAMETER OF HOLE THROUGH SPINDLE 125.0 mm SPINDLE SPEED 7 – 600 RPM PLUS 2 AXIS DIGITAL READ OUT TAPER TURNING

Condition: used, functionality: fully functional, For sale: a brushless servomotor, BOSCH SE-LB3.075.030-04.000, with permanent magnets and a 24 V holding brake. Technical specifications according to the nameplate: Manufacturer: BOSCH Type: SE-LB3.075.030-04.000 Number: Stock number: 104-915 093 Starting torque (M₀): 8.7 Nm Djdpfxj Aia Uqo Alfjwd Starting current (I₀): 8.0 A Rated speed: 3000 rpm Rotor moment of inertia: 17.9 kg·cm² Ingress protection rating according to the nameplate: IP65 Insulation class: F Holding brake: 24 V, 8 Nm, 0.8 A Country of manufacture: Germany — Made in Germany Condition: Used, functional motor. Damaged plastic housing of one of the electrical connectors — a fragment broken off around the pins, as shown in the pictures. The connector requires repair or replacement before use.

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Each ramp is approximately 2,700 mm long x 560 mm wide, with grating on the ramps. Loading height: 840 mm. 12 lashing points, each rated for 2.5 tons. 8 lashing points, each rated for 6 tons. Steel side rails, foldable and removable. Wooden planks, 50 mm thick. Loading area slopes towards the rear. Internal loading area width: 2,480 mm. Removable rear overhang. Front design allows for through-loading. Vehicle with temporary registration. Also available with a 5,300 mm loading area length!! Rental price starting from 500 €. Subject to printing errors, errors and changes. Sample images. More details under: ! Dedpfx Alj Aidncsfjwd

Condition: excellent (used), Year of construction: 2015, total length: 2,300 mm, total width: 2,600 mm, total height: 2,500 mm, overall weight: 4,000 kg, ARKU EdgeRacer ER 1500 D – Double-Sided Deburring and Edge Rounding Machine The ARKU EdgeRacer ER 1500 D is a high-performance industrial machine designed for automatic deburring and edge rounding of sheet metal components. Djds Aigigjpfx Alfswd Working width 1300 mm Thickness minimum 0,8 mm Thickness maximum 100 mm The machine processes both the upper and lower sides of metal parts simultaneously in a single pass, significantly reducing production time and manual finishing work. What is this machine used for? Removing sharp edges and burrs from laser-cut, plasma-cut and punched metal parts. Rounding internal and external edges for improved safety and surface quality. Preparing sheet metal components for painting, powder coating and further processing. Improving edge quality for welding and assembly. Processing steel, stainless steel and aluminium components. Finishing complex sheet metal parts with holes, slots and internal contours. Who is this machine interesting for? Laser cutting companies – Finishing laser-cut sheet metal parts quickly and efficiently. Sheet metal fabrication companies – Automatic deburring and edge rounding in production. Steel service centres – Processing large quantities of cut metal components. Stainless steel manufacturers – Producing smooth, safe edges on stainless steel parts. Automotive suppliers – Finishing precision sheet metal components. Machine builders – Preparing metal parts for assembly, welding and coating. Electrical cabinet manufacturers – Removing sharp edges from panels and enclosures. Subcontractors – Providing professional deburring services to industrial customers. Main advantages The major advantage of the EdgeRacer ER 1500 D is its double-sided processing technology. Unlike conventional deburring machines, which often require components to be turned over and processed twice, the EdgeRacer finishes both sides in one operation. With a working width of 1,500 mm, the machine is particularly interesting for companies processing medium to large sheet metal components. Typical industries: Sheet metal fabrication, laser cutting, automotive, machinery manufacturing, metal construction, stainless steel processing and industrial subcontracting. Conclusion: The ARKU EdgeRacer ER 1500 D is especially attractive for professional sheet metal manufacturers looking to reduce manual labour, increase production capacity and achieve consistent, high-quality edge rounding on both sides of their components. Length:2300mm Width:2600mm Height:2500mm Weight:4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), lifting height: 9,030 mm, fuel type: hybrid, General information Year of manufacture: 2023 Mileage: 63.649 km Weights Empty weight: 2.623 kg Functional Lifting capacity: 120 kg Working height: 1.100 cm Working width: 612 cm Dimensions of cargo space: 612 x 202 x 268 cm CE mark: yes Condition Technical condition: good Visual appearance: good Other information TÜV Marked: yes Delivery terms: EXW Max. horizontal reach: 600 m Max swing of platform in degrees: 400 Production country: FR Additional information Please contact Christian Theißen for more information Manufacturer: France Elevateur (Ruthmann) Model: Topy 11.1 Year of build: 2023 Condition: Used Data: Max. working height: 11,03 m Max. platform height: 9,03 m Max. reach: 6,00 m Total dimensions LxWxH: 6,12 x 2,02 x 2,68 m Platform dimension WxD: 0,68 x 0,63 m Length of transport position: 6,12 m Height transport position: 2,68 m Max. basket load: 120 kg Swivel range: 2 x 210°=400° Ground clearance: 0,19 m Driving license category: B / 3 Empty weight: 2.623 kg Total permissible weight: 2.743 kg Special features: Trailer hitch, rearview camera, paint in RAL9003 white, engine start/stop in the work basket, 2x LED warning lights + triflash, 2x wheel chocks including holder, socket in the basket, no supports. Dwedpfx Ae Aigq Solfjd Information: Tüv und UVV neu Location: 41468 Neuss immediately available

Condition: new, Year of construction: 2026, The rounding machines in design are based on former Oswald princip with a lot of new features. The machines are build modular und can be delivered in different sizes and with different options. The machine is available as single head or double head machine. Depending on the number of heads the machine can work up to 35 m/min, with speed control system even higher. The machines are available as model series with a total range from 30 up to 400 mm. Dwsdpjfw Ay Nofx Alfjd RM 30 – 120, RM 40 – 160, RM 80 – 200, RM 100 – 300, RM 160 – 350, RM 160 – 400 The rounding machines haf a lot of new features. All feed wheel pairs are opening and closed by valve cluster no mechanical dimension adjustment is needed. The rounding machine control is done by movable switch cabinet and control box for pressure regulation of segments of fedd rollers. The motors will be start by softstarter. For smoother surface condition or faster feed speed the machining heads are turning with higher speed. A control system is available for automatic speed control, depending on differenc between final log size and incomming log dimension. For save operation all doors are secured with electrical holder. To open the door the machine has to be stopped. This is needed to fulfill the high expectation of the the machine safety for secure operation.

Condition: good (used), Year of construction: 2019, functionality: fully functional, Design: Tabletop machine - Manual operation via 2-hand start - Ergonomic working with comfortable mushroom-shaped push buttons - Innovative emergency stop on the machine table - Emergency stop lighting visualizes machine status - Machine table 300 x 300 mm - Overhang (to the center of the sonotrode) 197 mm Model: FUSION CONSOLE P 1 Deflection-free machine stand - Patented brackets for maximum parallelism between the sonotrode and the workpiece - Ensures drive tracking for a stable process SERVO DRIVE 1 Fully electric servo drive - Height adjustment completely electric - Freely selectable start position for the shortest cycle time - High speed up to 240 mm/s - Stroke 300 mm with absolute position measurement POWER PACK P 1 High-precision force measurement with force sensor - Force 5 – 1000 N - Fast force control over the entire force range Dsdszil I Aspfx Alfswd PROCESS MONITORING 1 Welding process control model FUSION - Industrial PC with 17.3" color touchscreen - Welding types: distance relative, distance absolute, energy, time, power - Amplitude, force, or speed profiling with up to 5 steps - Comprehensive quality control with graphical display - Reliable monitoring of welding and process parameters - Easy setting of tolerance limits with setup assistant - Sequence setup for clear configuration of additional functions - 25 user levels with password protection - Productivity overview with piece and shift counters - Recipe management for up to 300 welding parts 1 UPS – uninterruptible power supply - Secure process documentation even in the event of a power outage 1 Standard control cabinet with electrical components and main switch - Dimensions approx. 450 x 600 x 300 mm PRODUCTIVITY 1 Vibrating tool holder, screwed - With indexing of the sonotrode alignment - Ergonomic holder made of aluminum - Easy replacement of the entire vibrating tool 1 Adjustment plate - Size 280 x 280 mm - Easy planar-parallel alignment of the workpiece to the sonotrode - Universal hole pattern for easy fixing of the fixture CONNECTIVITY 4.0 Comprehensive connection options and machine interfaces - Variable interfaces for up to 4 peripherals - USB & LAN connection for easy process data processing - Troubleshooting and assistance via remote service from MS Service Ultrasonic: 20 kHz with 1000 W 1 Digital ultrasonic generator soniGEN 20 /1000 - Frequency 20 kHz - Power 1000 W - Amplitude stabilization - Automatic sonotrode scan - Load compensation 1 Piezoelectric ultrasonic converter soniCON 20 kHz - Protection class IP54 - High-quality HF connector 1 Amplitude transformation piece soniAMP 20 kHz - Ratio 1:1 - Material: Titanium Please refer to the data sheet for technical specifications.

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS WORKBENCH Dode Adufdepfx Alfswd Table dimensions: 560 × 320 mm Hole diameter: approx. 90 mm FLYWHEEL Flywheel diameter: approx. 1,700 mm MACHINE DETAILS DIMENSIONS AND WEIGHT Length: 1,700 mm Width: 1,700 mm Height: 2,000 mm Weight: 670 kg

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Dodpfewc Afhsx Alfswd Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Djdpfx Alowc Ri Isfjwd Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting Dwodpfx Aswc Rk Ejlfsd No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Year of construction: 2026, Plasma sheet cutting, combined with drilling and tapping Heavy-duty gantry type cutting system combined for drilling, plasma and oxy-fuel cutting applications. Double-side drive, precise positioning system with rack and pinion on 3 linear axes and zero-backlash on the torch rotational axes. Reinforced construction of the gantry and drives to handle the heavy load during drilling applications. Low backlash, precision gears, as well as highly rigid and precise rail guiding system enable the smooth motion and excellent cut quality in corners and small holes. Transversal motion range (Y axis) -- on request Longitudinal motion range (X axis) -- on request Vertical motion range (Z axis) -- 500 mm KEY FEATURES: ▪ Fully automated technology for program creation and execution ▪ Program based on 2D part drawing ▪ Drill / tap operations assigned to single or multiple holes with the same diameter ▪ Automatic part nesting and rapid moves between holes and parts with different strategies ▪ Automatic tool change, fully programmable, no operator intervention needed ▪ Single program zero position for the complete drill and plasma cut processing in a single program. Just as normal sheet cutting process, no special settings or procedure required from the operator ▪ Automatic measurement of distance from the drill tip to the material. No measurement by operator needed ▪ Automatic tool cooling on-off control ▪ Chip -breaking drill head motion control with programmable parameters ▪ Automatic program head control ▪ Drill head moves to safe position automatically after drilling is done ▪ Plasma head automatically moves to start of cut position, searches the plate and starts cutting Dodpfxoh I Eits Alfewd ▪ Plasma head moves automatically to safe position after plasma cutting is done ▲ DRILL HEAD up to 29kW max. drill tool diameter 40mm ▲ PLASMA CUTTING EQUIPMENT HYPERTHERM -- on request ▲ INSTALLATION AND TRAINING INCLUDED Approximate installation and training period - 15 days

Condition: good (used), Bosch starter motor -Manufacturer: Bosch starter motor 12 V, unfortunately without type designation -Voltage: 12 V -Teeth: 10 -Solenoid coil: Type Dimensions: see photos -Overall dimensions: 340/180/H115 mm -Weight: 13.8 kg Dsdpfsit Rmfsx Alfswd

Condition: new, Year of construction: 2025, Units available in stock! Specifications: Throughput:Up to 5m3/h, ~700kg/h* Hopper: 0,57m3 Main motor: 22.5kW Hidraulics: 1.1kW Blades:38 units Blade size: 35x35mm Length: 2100mm Width: 1500mm Height: 1600mm Weight: 1700kg Screen: D8~D40 Output hole: D200 Warranty: 2 years / 1000 workhours Single rotor shredders are some of the most universal chipping platforms out there. Best known for shredding various types of wood (Briquettes, hardwood, softwood, lumber), the platform can easily be adapted to numerous other substances such as rubbers, plastics, paper, light metals and general waste (Even including medical!). Your needs are our commands. When implemented by woodworking companies into their current lineup this machine can turn woodworking and furniture making waste into briquetteable mass which is easier to store, transport and sell. Our single shaft shredders provides you with features found in much more powerful and expensive shredding units while keeping the price down to earth. A couple of them: The horizontal hydraulic ram: Assists the rotor by pushing the material to provide maximum working area efficiency. Is controlled by an algorithm to ensure safety and efficiency Dodpfxotmup Us Alfswd Gimbal-mounted hydraulics provide a high lifetime Ladder frame chassis and enclosed hydraulics to dampen noise, vibrations and increase safety Drivetrain The drivetrain is protected against hits from foreign objects by using a tripple-disengagement system which is easily resettable and serviceable. Offset placement of the rotor bearings keeps them away from dust and heat buildup. Rotor The centrepiece of the rotor is milled from a single block of high-grade steel. In case of severe damage to the rotor or its shafts, the latter can be replaced without the need to replace the whole unit – costs saved for the user! Blade holders are replaceable – unlike welded-in options, our rotor does not need to be replaced if the blade holders get damaged. 4-sided rotatable blades – a single blade will last you 4 times as long. Our fixed blades can be adjusted to compensate for the increased tolerances once the blades start wearing out – longer runtime with a single set of blades. Output Output and size is controlled by an interchangeable screen which is adapted based on the material used. The shredded material is removed using mechanical, or pneumatic conveyors. Affordable pricing, proven reliability, easy maintenance, quick service and parts delivery & a warranty – these are just a couple of reasons why choose us.

Condition: used, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Performance data Pressure: 100 t Machine weight: approx. 5.7 t Stroke and operating data Stroke: 0–500 mm Overhang: 310 mm Installation height: 1,130 mm The installation height is specified with the stroke in the upper position. Table and ram Table surface: 800 × 650 mm Ram surface: 800 × 600 mm Through-hole in the table: 355 mm Table height above the floor: 800 mm Safety data Dwsdpfx Alo Acgcfsfjd Safety distance: 270 mm Follow-up measurement: 135 m/s Follow-up travel: 44 mm Dimensions Length: approx. 1.2 m Width: approx. 2.0 m Height: approx. 3.67 m EQUIPMENT Conversion to comply with new safety regulations

Condition: used, mileage: 702,841 km, power: 353 kW (479.95 HP), first registration: 06/2015, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, brakes: retarder, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Wheelbase shortened to 3200 mm. Engine D2676LF25 - 480 hp / 353 kW, EURO6 SCR - 2300 Nm, C-R. Transmission: MAN TipMatic 12 23 DD. Front springs: Parabolic, 9.5 t. MAN PriTarder. Engine overhaul with replacement of clutch and release fork. Brakes 1 and 2: NEW. Rear frame overhang: 1950 mm. Engine D2676LF25 - 480 hp / 353 kW, EURO6 SCR - 2300 Nm, C-R. Transmission software: MAN TipMatic® Profi (for on-road use). Transmission: MAN TipMatic® 12 23 DD. Fuel tank: Aluminum, 300 l, short, left side, and 60 l AdBlue. Front axle: VOK-09, angled. Front springs: Parabolic, 9.5 t. Water cooler and charge air cooler for ambient temperatures up to 35°C. Rear springs: Air suspension. Instrument panel: km/h, 'High-Line'. Steering wheel: Adjustable in height and tilt. MAN BrakeMatic (electronic braking system). Rear axle: Hypoid HY-1350. Rear axle ratio: i = 2.85. Differential lock in rear axle. Wheels: Disc, 10-hole, 9.00-22.5 on front and rear, non-driven axle. Wheels: Disc, 10-hole, 11.75-22.5 on 1st driven axle. Wheels: Disc, 10-hole, 9.00-22.5 on 1st rear axle. Fuel tank mounting. Tag axle: NOL-08, steered, liftable. Digital tachograph, manufacturer: CONTI. MAN EasyStart with TipMatic. Cab: Medium-high roof 'XLX', 2440 mm wide, 2280 mm long. Storage compartment accessible from inside and outside - interior latch release. Seat covers: Comfort quality. Driver's seat: Air-suspended, with lumbar support, shoulder adjustment, and heating. Passenger seat: Static, adjustable in length and backrest. Front flap: Releasable from inside. Two vehicle keys additional. Door extension. Door interior panel: Fabric. Visco fan. Air deflection plate to prevent dust from being swirled up. EDC engine control. General PTO parameterization. Emergency braking signal (ESS). PTO: NH/4C, without flange, f=1.05, on the right side. Fuel filter. Heater for fuel filter. Pressure sensor for air suspension bellows. Preparation for data interface for remote download with digital tachograph. Tachograph calibrated. Chassis tipping mechanism: Hydraulic/electric. Safety package: Active plus. Comfort package 1: Driver. Auxiliary heater: EBERSPÄCHER D4S. Air conditioning: AC R134A, CFC-free, with automatic temperature control. Cab insulation: NORDIC (against cold) for 'XLX'. Operating manual: German. Mirror covers: Painted in cab color. Air intake: Raised, with dry air filter. Fine dust and pollen filter. Connection for external speed control (ZDR). Control module for external data exchange (KSM) with fleet management system interface 2.0 (FMS). Body functionality. Single-cylinder air compressor: 360 ccm. Exhaust: Side, right, with ground outlet. Regulated rocker arm brake (EVBec). MAN PriTarder. Steering wheel lock with immobilizer. Multifunction steering wheel for cab. Emergency Brake Assist 1 (EBA1). Anti-lock braking system (ABS). Brake connection: 2-line. Entry light for driver and passenger. Armrests for driver's seat. Compressed air connection in the cab. Compressed air hose and compressed air gun. Stone guard in front of the cooler. Engine start/stop device under the front flap. Fuel tank cap: Lockable, 1 piece, vented for matching keys. AdBlue tank cap: Lockable, 1 piece. Headlight leveling. Additional dipped and fog lights with cornering lights. Halogen double headlights H7 for right-hand traffic. 2 work lights on the cab roof. Interior lighting: Red/white in the cab roof. Automatic lowering of air suspension. Parameter input ECAS with additional circuit to suppress level cont Dode Agqnwspfx Alfowd

Condition: used, mileage: 150 km, power: 125 kW (169.95 HP), first registration: 11/2026, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Are you looking for a different model, engine, dimensions, or other features? Please feel free to contact us. We offer financing and leasing at attractive terms - also for the Netherlands, Austria, and new businesses! ----Vehicle: Wheelbase: 4325 mm * 6-speed manual transmission * Single cab * Twin rear tires * Gross vehicle weight 5 tons * Digital tachograph 4.1 * Speed limiter 90 km/h Technology/Comfort: Digital radio * Acoustic package * Apple CarPlay/Android Auto * MBUX multimedia system * Smartphone integration package * Air conditioning – “Tempmatic” * Cruise control * Electrically adjustable and heated exterior mirrors * Multifunction steering wheel adjustable for height and inclination * Light sensor * 93L main fuel tank * 22L AdBlue tank * Driver's single seat with armrest * Comfort driver's seat * Double passenger seat * 3-seater * Seats in black leatherette * Hill start assist * Preparation for toll system * Central locking with remote control * Electric front windows Safety: * All-season tires * Reinforced front axle * Side wind assist * Lane keeping assist * Rain sensor * Intelligent speed assist * Reversing warning * Fog lights with cornering function * Attention assist * Battery main switch * Halogen headlights * Outline lights * Side marker lights * Adaptive brake light * Seatbelt warning system Refrigerated box: * Insulation 80 mm / 100 mm * Floor reinforced with anti-slip structure * Two rear doors with separate locking mechanism and 270° opening angle * Side door with separate locking mechanism and step * Combination anchor lashing rail (1 left & 1 right) * 1 lashing strap * Interior and exterior LED lighting * Roof spoiler * Drain holes in the front of the box * Double sealing system on the loading openings * Reversing camera * Side underrun protection * Wheel protection with mud flaps Refrigeration unit: Dwodpfx Aljwq Umtofjd * ThermoKing V500X (-20°C to 20°C) * Driving and standby cooling * With heat pump * Temperature recorder (thermograph) * ATP certificate available Tail lift: Dhollandia * DH.LM10 * Load capacity 1000 kg * Plate depth 1800 mm * Roll-stop protection * LED warning light * Remote control with spiral cable * Trailer coupling 3.5 t trailer load (trailer hitch, 12V 13-pin trailer socket) Additional extras related to the bodywork are available at an extra cost. ----Note: Please call us briefly before your visit so that we can ensure your desired vehicle is on site. If it is not in Wachtendonk, we will gladly deliver it from our inventory. Individual customization upon request. Your vehicle partner since 1996. Call or email us now - we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale reserved. Best regards, Pimenta Automobile

Condition: used, mileage: 150 km, power: 120 kW (163.15 HP), first registration: 11/2026, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 3,500 mm, loading space width: 2,100 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Are you looking for a different model, engine type, dimensions, or other specifications? We offer financing and leasing at attractive conditions – also available for Austria, the Netherlands, and new business founders! Vehicle: * Wheelbase: 3640mm * 6-speed manual transmission * Single cab * Twin rear tires * Gross vehicle weight: 5 tons * Digital tachograph 4.1 * Speed limiter 90km/h Technology/Comfort: * Infotainment Composition * Apple CarPlay / Android Auto * 10" Touch-color display * Navigation system * 4 speakers * Bluetooth * Digital radio DAB+ * 12V socket in the center console * 2x folding keys with remote control * 4x USB-C ports * App-Connect Wireless (or via cable) * Manual air conditioning * Double passenger seat with storage compartment * Digital cockpit * Automatic windshield wiper control * Cruise control * Fuel tank 75L * Reinforced front axle * Central locking with keyless start * Storage package 2 * Lockable, illuminated glove compartment * Preparation for We Connect & We Connect Plus * Electrically adjustable and heated exterior mirrors * Multifunction steering wheel * Driver's seat "Comfort" Safety: * Summer tires * Front airbags for driver and passenger Dwodpfoy Trq Isx Alfjd * Front Assist * Lane keeping assist * Hill start assist * Side marker lights * Electronic immobilizer * Direct tire pressure monitoring system * Tool kit and jack * Daytime running lights * Spare tire * Parking assistance front and rear * Driver fatigue detection * Emergency call system "eCall" * Start-stop system * Electric parking and emergency brake * Reversing warning sound * Extended exterior mirrors Refrigerated box: * Insulation 80mm/100mm * Non-slip floor surface * Reinforced floor * Two rear doors with separate locking system and 270° opening angle * Side door with separate locking system and step * Combination anchor lashing rail (1 left & 1 right) * 1 lashing strap * Interior and exterior lighting LED * Roof spoiler * Drain holes in the front of the box * Double sealing system at the loading openings * Side underride protection * Wheel protection Refrigeration unit: * ThermoKing V500X (-20°C to 20°C) * Driving and stationary cooling * Thermograph * ATP certificate possible Tail lift: Dhollandia * DH.LM10 * Load capacity 1000kg * Platform depth 1800mm * Roll-off safety * LED warning light * Remote control with spiral cable * Trailer coupling 3.5t trailer load (trailer coupling ball, trailer coupling socket 12V 13-pole) Additional extras for the body can be obtained for an extra charge. Note: Please call briefly before your visit – we will ensure that your desired vehicle is on site. If it is not in Wachtendonk, we will gladly deliver it from our stock. Customized bodywork possible on request. Your vehicle partner since 1996. Call or email us now – we look forward to hearing from you! No liability for printing and typographical errors. Errors and prior sale are reserved. Best regards Pimenta Automobile

Condition: used, mileage: 150 km, power: 120 kW (163.15 HP), first registration: 11/2026, fuel type: diesel, overall weight: 5,000 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 4,100 mm, loading space width: 2,050 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, tail-lift, Are you looking for a different model, engine, dimensions, or anything else? Feel free to contact us. We offer financing and leasing at attractive conditions - also for the Netherlands, Austria and new entrepreneurs! Vehicle: * Wheelbase: 4490mm * 6-speed manual transmission * Single cab * 3 seats * Twin rear tires * Gross vehicle weight 5 tons * Speed limiter 90km/h * Digital tachograph 4.1 Technology/Comfort: * Infotainment package "Discover Media" * 10" touch-color display * Navigation system * 4 speakers * Bluetooth * Digital radio DAB+ * Light and Visibility Package * LED headlights * 12V socket in the center console * 2x folding keys with remote control * 4x USB-C ports * Manual air conditioning * Digital instrument cluster * Automatic windshield wiper control * Cruise control * Fuel tank 75L * Reinforced front axle * Reinforced suspension and stabilizers * Central locking with keyless start * Multifunction display "Plus" * Storage package 2 * Lockable, illuminated glove compartment * Electrically adjustable and heated exterior mirrors * Multifunction steering wheel * Driver's seat "ergoComfort" * Reinforced AGM battery and generator * Robust fabric upholstery "Marathon" * Fog lights with cornering function * Battery switch * Electrical connection rail Safety: * Winter tires * Front airbags for driver and passenger * Traffic sign recognition * Front Assist * Lane keeping assist * Hill start assist * Side marker lights * Electronic immobilizer * Tool kit and jack * Daytime running lights * Spare wheel Refrigerated box: * Insulation 80mm/100mm * Non-slip floor surface * Reinforced floor * Two rear doors with separate locking and 270° opening angle * Side door with separate locking and step * Combination anchor lashing rail (1 left & 1 right) * 1 lashing strap * Interior and exterior lighting LED * Roof spoiler * Drain holes in the box front * Double sealing system on the loading openings * Rear view camera * Side underrun protection * Wheel arch protection Refrigeration unit: * ThermoKing V500X (-20°C to 20°C) * Driving and parking cooling * Thermograph * ATP certificate possible Tail lift: Dhollandia * DH.LM10 * Load capacity 1000Kg * Platform depth 1800mm * Roll-off protection * LED warning light * Remote control with spiral cable * Trailer coupling 3.5t trailer load (trailer coupling ball head, trailer coupling socket 12V 13-pole) Additional extras for the superstructure are available at an extra cost. Note: Please call briefly before your visit - we will ensure that your desired vehicle is on site. Dwodpfjw E Akijx Alfod If it is not in Wachtendonk, we will gladly deliver it from our stock. Individual customization possible upon request. Your vehicle partner since 1996. Call or email us now - we look forward to hearing from you! No liability for printing and typographical errors Errors and prior sale excepted Kind regards Pimenta Automobile

Condition: used, Shredding Machine MGZ 1330, 37 kW Operating hours: 275 Included: - Second knife row - Fast hydraulics for increased throughput - Preparation for conveyor belt Optional: - Conveyor belt with automatic metal separator Dodjx Tfdhjpfx Alfowd Your advantages: + Extremely large cutting chamber opening; top: 1300x1200mm + Special rotor suitable for both hardwood and softwood + Energy-efficient and powerful, 37 kW start-up power Technical data: Feed opening, top (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen hole size (mm): configurable Tools: 37/70 knives Extraction connection diameter (mm): 200 mm Dimensions: 2430x2410x1735 mm (LxWxH) Weight (approx. kg): 3,500 --- Feedstock requirements: - The moisture content (atro) must be below 20% - The feed material must be free of metals and mineral contamination. Damage to the tools and/or increased wear may result.

Condition: used, 2.87 meter Jungheinrich pallet racking with 2 levels Jungheinrich pallet racking, type MPB, basic bay with a total length of 2870 mm. The bay has two levels (including a ground-level storage space) with two crossbars (2700 mm). The bay can accommodate 3 Euro pallets side by side and 6 pallets (including a ground-level storage space) stacked on top of each other. The bay offers space for 6 Euro pallets. Manufacturer: Jungheinrich Type: MPM Total length: 2870 mm Racking height: 3000 mm Djdpfx Aswyc S Ajlfowd Racking depth: 1100 mm Clear bay width: 2700 mm Number of storage levels: 2 (including ground-level storage space) Number of bays: 1 Max. shelf load: 3000 kg Max. bay load: 7100 kg Pallet spaces: 6 Racking according to standard: DIN EN 15512 Upright surface: powder-coated Upright RAL color: RAL 5010, gentian blue Upright type: B’12 Crossbar RAL color: RAL 1007, daffodil yellow Crossbar surface: powder-coated Scope of delivery: 02 x Jungheinrich pallet racking uprights, blue, 3000 x 1100 mm 02 x Jungheinrich pallet racking crossbars, yellow, 2700 x 140 x 50 mm 04 x Locking pins You can find more new and used items in our shop! International shipping costs available upon request!

Condition: new, Bernardo Universal Lathe Titan 660 x 3000 Technical Specifications Distance between centers: 3000 mm Center height: 330 mm Swing over bed: 660 mm Swing over gap: 900 mm Swing over cross slide: 460 mm Bed width: 400 mm Spindle bore: 105 mm Spindle mount: DIN 55029, D1-8 Speed range: (16) 25 - 1600 rpm Longitudinal feed range: (25) 0.044 - 1.48 mm/rev Cross feed range: (25) 0.022 - 0.740 mm/rev Metric threads: (54) 0.45 - 120 mm Inch threads: (54) 7/16 - 80 TPI Tailstock quill diameter: 90 mm Tailstock quill travel: 235 mm Tailstock taper: MK 5 Motor power: 7.5 kW (10.0 HP) Machine dimensions (W x D x H): 4630 x 1200 x 1520 mm Djdpfx Aloxxayfefewd Approx. weight: 3300 kg Features • Versatile use in general mechanical engineering, production, single-part manufacturing, etc. • Central, user-friendly control for feeds and threading with leadscrew and feed shaft • Prism bed made of cast iron, inductively hardened and precision ground • Modern main spindle bearings with precision angular contact roller bearings • Hardened and ground gears and shafts, also in the feed gearbox • Rapid traverse longitudinal and cross as standard to reduce non-productive times • Large spindle bore (105 mm) for machining workpieces with large diameter • Smooth start-up via mechanical multi-plate clutch • Electromechanical foot brake to reduce non-productive times • Optimal cutting performance even during facing operations • Bed reinforced with robust ribs to stiffen the guideway and minimize vibration influences Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • Slip clutch • Rapid traverse longitudinal and cross • LED machine light • 3-jaw steel chuck PO3-315 mm / D8 • Face plate 450 mm • Fixed steady rest – through hole diameter max. 180 mm • Travelling steady rest – through hole diameter max. 120 mm • 2 live centers • Motor with magnetic brake to CE standard • Foot pedal with brake function to CE standard • Initial filling with Shell Tellus 46 • Coolant system • Quick-change tool post with 4 holders • Safety device for quick-change tool post • Change gears • Reducing sleeve • Chip guard rear panel • Cable management via energy chain • Operating tools

Condition: used, Inrush current limiter, soft starter, soft starter, starting current limiter, soft starting choke, soft starter, starting choke -Manufacturer: Horstmann, soft starter -Type: ESA 1.5/400 -P motor: 1.5 kW 400V 50/60 Hz -Dimension: 135/55/H75 mm -Weight: 0.3 kg Dodpjqrwxpsfx Alfswd