Used Stair Thrower for sale (226)

Condition: as good as new (ex-display), Year of construction: 2026, High-pressure cleaning unit, high-pressure flushing unit, high-pressure built-in unit on hot-dip galvanized and painted high-quality steel frame with forklift tines, suitable for installation in service vehicles. PTC Salmon, similar but not Feierabend & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rom, Rowo,... The following models are available: Salmon 60/150 | 60 l/min at 150 bar | Engine: Kohler 19 kW Salmon 45/200 | 45 l/min at 200 bar | Engine: Kohler 19 kW Salmon 35/250 | 35 l/min at 250 bar | Engine: Kohler 19 kW Salmon 30/300 | 30 l/min at 300 bar | Engine: Kohler 19 kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 760x1,250x1,200 mm Dimensions with 400l water tank LxWxH: approx. 1,220x1,250x1,200 mm Dimensions with 800l water tank LxWxH: approx. 1,670x1,250x1,200 mm Empty weight without water tank: approx. 370 kg Empty weight with 400l water tank: approx. 400 kg Empty weight with 800l water tank: approx. 430 kg HIGH-PRESSURE PUMP: - Manufacturer: HPP - Model: CLW - Flow rate: 30 - 60 l/min - Operating pressure: 150 - 300 bar ENGINE: - Manufacturer: Kohler - Model: KDW 1003 - Fuel: Diesel - Max. power: 26 hp (19 kW) CONTROL PANEL: - Start button - Operating hour counter - Electronic fuel gauge - LED indicators for oil temperature, low oil pressure, clogged air filter, tachometer, generator and spark plugs - Emergency stop button ELECTRICAL CONTROL: - Wind/unwind hydraulic hose reel; - Bypass on/off; - Speed control +/-; - Emergency stop button; - Switch to wireless remote control; INSTALLED ALARM: - Low water protection against dry running of the high-pressure pump with automatic shut-off function. Iijdpfxjiky H Ss Ahyjh SAFETY AND PRESSURE REGULATING VALVES: - The unit is equipped with a safety valve, a pressure regulating valve and a pressure gauge. HIGH-PRESSURE HOSE REEL: - Type: Electric hose reel - Material: Stainless steel - Capacity: max. 80 m ½“ and 80 m 3/8" high-pressure hose - Hose: 80 m ½“ high-pressure hose (included) - Hose guide: manual LOW-PRESSURE WATER SUPPLY HOSE REEL: - Type: manual hose reel - Material: Stainless steel - Capacity: max. 35 m ¾“ low-pressure hose - Hose: 35 m ¾“ low-pressure hose (included) WATER FILTER: - With washable cartridge and drain valve. - Filtration rate: 50 Mesh INCLUDED IN DELIVERY: - Multifunctional wireless remote control IMET; - Engine on/off; - Bypass on/off; - Speed control +/-; - Wind/unwind hydraulic hose reel; - Emergency stop button; - Battery charger for wireless remote control; - 400 or 800 l water tank (with steel frame) made of polyethylene; OPTIONAL ON REQUEST: - Pulsation/booster pump; - 50 or 60 m ½“ high-pressure hose; - 50, 60 or 80 m 3/8“ high-pressure hose with G3/4“ connection; ACCESSORIES ON REQUEST: - STORZ kit for connection to the water hydrant; - UNI 45 kit; - Version with 2 HD reels; - Mobile hot water generator 10 kW – 12 VDC; - High-pressure spray gun kit, swivel joint and quick coupling; - High-pressure lance kit with flat spray nozzle 15° / rotating nozzle; - Lance kit for high flow; - Rotating nozzle kit; - Double nozzle kit; - Water sandblasting lance kit; - Detergent dispenser kit; - Stair cleaning unit; - Surface cleaner; - Sludge suction device (Venturi); - Pipe cleaning nozzles; Further accessories on request.

Condition: used, Gas cylinder cart, gas cylinder cart, steel cylinder cart, gas cylinder stair cart, stair hand truck -Manufacturer: Fedor Ulisch, stair hand truck with a wide shovel -Pipe frame: stable design with locking lever Iiedpfx Ajf Tdudohyoh -Dimensions: 670/530/H1215 mm -Weight: 30 kg

Condition: excellent (used), The line for gnocchi includes: Iiodpfxjfwmt Ue Ahyeh - GLASS (Germany) cooking kettle, type PRO-3, tilting, 500 ltr. capacity , with mixing, vacuum and cooling - bin loader for 200 ltr. bins feeding the dough into the forming machine - SANDORE (Italy) forming machine , type NF 100 C, power 8.5 kW - segment feeder, type Z, feeding the product to the vibrating tunnel, width: 400 cm, height 200 cm, drying and cleaning the product (vibrating screens, blowing turbines) - SARP (Italy) vibrating tunnel, type STR 4107, power 4.7 kW - SARP (Italy) waste and water separator, model FILTRO, with vacuum extraction from a vibrating tunnel, power 2.2 kW - conveyor feeding to the weighing machine, type Z, height 500 cm - weigher platform with stairs, dimensions: 500 cm x 500 cm on posts 220 cm high - BVBA (Belgium) 10-head weigher, type 01AAH / WS - TIROMAT BL-150 (Italy) packing machine, type ETI 422N, linear packing machine for vacuum packing, 2 dimensions of forms - segment conveyor that discharges the finished product to the carton boxes packing warehouse, a spiral conveyor that outputs packages to a height of 260 cm + a straight section of 20 meters

Condition: new, Year of construction: 2026, The CORMAK PT310ET planer–thicknesser is an advanced woodworking machine that combines the functionality of a jointer and a thickness planer in one robust construction. It stands out with exceptional stability, high working power, and features that increase precision and operator comfort, such as additional feed rollers integrated into the thicknessing table. Key Advantages S6 motor power: 2.8 kW (S1: 2.2 kW) – one of the most powerful in its class, ensuring consistent performance even under heavy loads. Stable 180 kg construction – rigid cast-iron tables and additional rubber-coated feet minimize vibrations and increase precision. Quick mode switching – fast change from jointer to thicknesser by lifting the tables and repositioning the chip-extraction hood. Smooth and quiet operation – low noise emission and accurate material feed ensure operator comfort and safety. Efficient extraction system – Ø120 mm outlet allows effective chip removal, especially during intensive use. Unique Benefit: Feed Rollers in the Thicknesser – specially designed auxiliary roller extensions integrated into the thicknessing table support the machining of long and heavy workpieces, making feeding and collecting easier while improving surface finish quality. Applications Carpentry and furniture workshops – for daily, efficient machining of solid wood and laminated boards. Production of structural components – ideal for flattening and calibrating construction elements, stairs, frames, and mouldings. Technical schools – for training in professional woodworking using high-quality industrial equipment. Standard Equipment Three HSS knives, 310 × 25 × 3 mm Cutterhead guard Cast-iron jointer tables Ø120 mm dust-extraction outlet Feed switch and emergency STOP switch Operating manual (DTR) CE declaration of conformity Technical Specifications Cutterhead diameter: 75 mm Cutterhead speed: 5500 rpm Dust port diameter: 100 mm Fence tilt angle: 90–45° Number of knives / dimensions: 3 / 310 × 25 × 3 mm Maximum jointer width: 310 mm Maximum thicknesser width: 308 mm Planing height range: 5–225 mm Maximum depth of cut (thicknesser): 2.5 mm Maximum depth of cut (jointer): 4 mm Thicknesser feed speed: 6 m/min Jointer table dimensions (L × W): 1300 × 310 mm Gross weight: 180 kg Motor speed: 2800 rpm Motor power: S1: 2.2 kW / S6: 2.8 kW Power supply: 400 V, 5-pin socket, 16 A Iijdpfxoxy Hy Ue Ahyoh Manual (DTR): Polish/ English CE declaration: yes

Condition: new, Year of construction: 2025, 4-head stand-alone linear weigher for weighing up to 1,000g. Including framework for small 2-/4-head weighing systems to avoid the transfer of machine vibration to the weigher. Without stairs, without handrail. Made of stainless steel (SUS 304). - Size will be customized. Button to open the weighing head when using the weigher for semi-automatic filling. - Specifications: Number of weighing heads: 4; Volume per head: 2.4 L; accuracy: 0.5-5.0g; max. speed of the machine in neutral: 40 cycles/minute; power: 220V, 1kW; machine dimensions in mm: L920xW775xH(customized); eight: 169 kg (without framework). Iiedpfx Ahov Nk Dgjyoh Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Year of construction: 2025, condition: new, 1) Inclined Conveyor: - Length 12,000 mm, working width 900 mm - Hopper length 3,000 mm, width 2,000 mm, height 1,500 mm from the ground, - Inclination angle approx. 16° - EP 400/3 rubber belt with 32 mm cleats - Inverter-controlled conveyor speed up to 0.3 m/s - Conveyor with safety stop 2. Sorting Table: - Conveyor length 15,000 mm, working width 950 mm, - Height 1,300 mm to the top of the belt, - Height 1,400 mm to the top of the sides (10 cm hollow walls), - The conveyor sides are made of galvanized steel, - The rubber belt is EP 400/3, smooth - The sides of the conveyor are 100 mm, - The height of the hopper is 600 mm, width 1,000 mm - The conveyor speed is controlled by the inverter to 0.4 m/s - Safety stop switch 3. Steel platform with WEMA grating: - Length 15,000 mm - Width of the platform is 3,200 mm - Height 2,500 mm from the ground, - Grating stairs on both sides of the conveyor made of WEMA grating, - On steel legs, quantity of 12 pcs, - Number of boxes 5 pcs, - Number of slides 10 pcs, - Slide dimensions: 400 mm x 1,000 mm, - Under the slide, attachments for big bags - connected to a winch. 4. The line is painted with two coats of paint. 5. RAL orange color 2011 6. Sorting line equipped with a switch box, wire-type stop switches, and a 32A/5 and 15m long plug of a power cable with rubber insulation. 7. The sorting line has a warranty of 24 months. 8. The sorting line is CE-certified. 9. Price - loco Poznań (Poland). The pictures show the layout of such a sorting system. We produce versions with 4, 6, 8, 10, or even 12 workstations. Semi-mobile or stationary. Assembly on the ground or on a frame. Iijdpfx Ajd N Hiijhysh

Condition: new, Year of construction: 2025, IDEAL FOR STAIRCASE CONSTRUCTION other versions available upon request - 5 levels - Clamping depth 1050 mm Iodpfogu D Rmjx Ahyjih - 1 pressure bar, 1500 mm long, 60 mm high, per level - 3 continuously adjustable pivoting counter supports, 400 mm long, per level - 2 pressure plates with handwheel, per level - 5 support arms, per level - all support arms with plastic pads (glue-resistant) - maximum clamping length 1600 mm - Powder-coated (glue-resistant): gray-white RAL 9002, moving parts light blue RAL 5012 - The presses are delivered ready for operation, complete with pressure regulating valve and standard air connection.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, warranty duration: 12 months, The POWER Plus Thin Cutting Frame Saw was developed to be affordably priced for companies with medium to small production needs. The machine has a sturdy, solid cast iron base and is equipped with a 15 kW (20 HP) main motor. The Frame Saw cuts solid wood blocks into gluable slats with minimum saw kerf waste. The machine can run products up to 150 mm in width and 250 mm in height. The POWER Plus Thin Cutting Frame Saw provides the smaller manufacturer a high performance and quality machine for the production of their veneer slats/lamellas; all for an affordable price. Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. Features: High precision lamellas with gluable surface in tolerance ± 0.1 mm, depending on lamellas width The "Plus" System is designed for quick set-up and easy adjustment of the top pressure rollers via electrical motor Air Blast system located directly behind the saw blades keeps the saw blades clean and prevents heat build-up Automatic Opening of the machine for safe and easy removal and installation of the saw frame Sturdy and durable Cast Iron Saw Frame Carriage no play mounted on linear guides Feed roller movement is synchronized with the up/down movement of the saw frame Modular Infeed can accommodate a center guide, side guide or channel system Chip Breaker prevents splintering on the bottom side of the wood Solid cast iron machine construction minimizes vibration Top and Bottom Driven Feed Rollers Automatic Central Lubrication Unit Solid Steel Crank Arms Isdpfoy Rk Umex Ahysih On demand Features: Top and Bottom Planing Module on machine outfeed Air Jet system for cooling with extra ventilator Top Planing Module on machine infeed Automatic Hopper Feeder Wet Way Cutting Option Blades Tension Master

Condition: good (used), mileage: 192,235 km, power: 118 kW (160.44 HP), first registration: 05/2021, fuel type: diesel, tire size: 195/75R16, axle configuration: 4x2, wheelbase: 3,750 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, suspension: other, number of seats: 3, total length: 5,500 mm, total width: 2,140 mm, total height: 2,400 mm, loading space length: 3,280 mm, loading space width: 2,010 mm, loading space height: 350 mm, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, power mirror, traction control, trailer coupling, = Additional Options and Accessories = - Heated mirrors - None - LED lamp - Manual - Radio/cassette - Reversing camera - Lane keeping assist - Fabric = Notes = Configuration: 4x2, dual tires, unladen weight: 2976 kg, gross vehicle weight: 3500 kg, trailer coupling, cab type: single cab, cruise control, air conditioning, number of airbags: 1, parking assistance: None, electric windows, electric mirrors, radio/cassette, GPS navigation, color: white, maintenance manual, heated mirrors, reversing camera, lighting type: LED lamp, lane keeping assist, Bluetooth, flashing lights, engine power: 118 kW (158 hp), engine displacement: 2998 cc, fuel: diesel, Euro: 6, drive technology: timing belt, transmission type: manual, gears: 6, power steering, ABS, ASR, starter battery, body type: extended, number of sides: 1 side, roof rack: None, rear closure: double door, central locking, number of seats: 3, seat arrangement: 1+2, seat covering: fabric, seat adjustment: manual, 3.0L dump truck, air conditioning, dual tires, 3.5T - trailer coupling, navigation, Euro 6, service history, 1st owner!, spare wheel, tire type: summer tires = Further Information = Axle configuration Tire size: 195/75R16 Brakes: disc brakes Axle 1: tire tread depth left: 7 mm; tire tread depth right: 7 mm; suspension: trapezoid suspension Axle 2: dual tires; tire tread depth left inside: 5 mm; tire tread depth left outside: 3 mm; tire tread depth right inside: 5 mm; tire tread depth right outside: 4 mm; suspension: leaf spring suspension Weights Unladen weight: 2,976 kg Payload: 524 kg GVWR: 3,500 kg Functional Loading area height: 94 cm Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial Information Leasing price: 352 € per month (van, 72 months); please inquire for further information and conditions Iedpsz Ag Nnjfx Ahyoih Identification License plate: KLEYN1

Condition: new, total length: 12,000 mm, total height: 3,000 mm, total width: 5,000 mm, load capacity: 500 kg, Storage platform, 12,000 x 5,000 mm, load-bearing capacity 500 kg/m² Dimensions/Technical Data: Dimensions of steel structure: 12,000 x 5,000 mm Dimensions of floor area: 12,000 x 5,000 mm Floor area: approx. 60 m² Height to top of floor covering: up to 3,500 mm (freely selectable) Clearance height underside: top surface minus 338 mm Net load-bearing capacity: 500 kg/m² evenly distributed load Included in the scope of delivery: 8 uprights, single-sided 100 x 100 x 3 mm 6 main beams C+300 x 3 mm, L = 3,990 mm (perforated) 13 cross beams S+300 x 2 mm, L = 4,800 mm (closed) 26 mounting brackets 3 diagonal bracing 24 chipboard panels P6, 3000 x 850 x 38 mm, underside white, top surface natural including fastening material including load signs Uprights available in the following standard colors: RAL 7035 light gray RAL 7016 anthracite gray RAL 3000 fire red RAL 5003 sapphire blue (other colors on request) Main and cross beams galvanized We also manufacture storage platforms to any other desired dimension. Prices on request. Accessories such as stairs, railings, etc. are not included in the scope of delivery. These can be supplied for an additional charge. (Prices on request) Our services at a glance: (Prices on request) Assembly, installation our general assembly conditions apply Iedpfxsd Htr Re Ahysih Shelf testing Shelf inspection according to DIN EN 15635, performed according to the requirements of BGR 234, visual inspection for all shelving systems Delivery with our own fleet of vehicles (without unloading)

Condition: good (used), Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 785 x 385 mm -Total height: 20 mm -Struts: wall thickness 2 mm Iiedpfx Ajrri Ttjhysh -Bridge height: 20/12 mm -Gratings: Hot-dip galvanized -Quantity: 4x grids available -Price per piece -Weight: 6 kg/piece

Condition: good (used), 550 m² Stow storage mezzanine Used, good condition, see pictures. Length approx. 27m Width approx. 24m Height, top edge, 1 level approx. 4.3m Height, bottom edge approx. 3.88m Load capacity per m² 500 kg Upright type: Hollow section profile 120/120 Stairs, railings, transfer station, lift and much more available! Negotiable price: €70,-- net per m² Partial sale and CAD planning possible. All plans and structural calculations available. Storage mezzanine already dismantled, loaded by the seller. Goods are in stock. Transport and assembly available upon request. Inspection possible at any time by appointment. Further information on request. Constantly over 5,000 linear meters of pallet racking from numerous manufacturers in stock. (Changes and errors in technical data, information and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Lenox Trading – Top storage technology & heavy-duty racking used & new Description: Are you looking for high-quality storage racks to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers for new and used storage technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage mezzanines & steel platform mezzanines immediately available • Weekly 30-50 semi-trailer truck shipments for maximum selection 📦 OUR RANGE (BUY ONLINE AT A GOOD PRICE): Whether pallet racking, heavy-duty racking, high-bay racking, shelving, tire racks or racks for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY SALES: Iisdot Iv H Tspfx Ahysh • SSI Schäfer (Schäfer Lagertechnik, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, Heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi Cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest (Vöst), SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND PILLAR: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a comprehensive all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & complete stock including complete clearance. 2. Commission auction: Carrying out auctions on behalf of customers. Our full service provided by our own employees: Cataloging, office preparation, inspection, goods delivery, logistics, dismantling and complete clearance. Whether you found us because of heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system – we guarantee the best conditions. Contact us for a non-binding offer!

Condition: new, Year of construction: 2027, Machine for grinding, satin finishing, or polishing flat parts and profiles (finishing profiles, transition profiles, expansion joints, skirting profiles, decorative profiles, stair and terrace profiles, tile trims, edge protection profiles, renovation profiles). Benchtop polishing machine / automatic flat polishing machine for parts up to 3,000 mm in length (longer products available upon request). Iisdpfeg D Rfmjx Ahysh Equipped with one or two processing units. Base machine and control cabinet are new; processing units are used but fully refurbished with new motors. Further information available upon request.

Condition: as good as new (ex-display), Year of construction: 2026, travel distance X-axis: 1,300 mm, travel distance Y-axis: 6,300 mm, travel distance Z-axis: 300 mm, Technical Data: Control System: Multi-axis real-time interpolator with active trajectory prediction, LAN communication, EtherCat, sampling time below 2ms, correction map, RTCP tool tip tracking, remote service access. Working Area: 1300×6300 mm Z-Axis Clearance: 300 mm Drive System: Servo drives with EtherCat protocol, X and Y axes with helical, hardened and ground racks (accuracy class 6), Z axis with precision class 6 ball screw, planetary gearboxes with backlash less than 1’. Linear Bearings: Linear guides with preloaded tension. Traverse Speed: Up to 30 m/min Software Resolution: Up to 0.0001 mm Positioning Accuracy: 0.01 mm Electrospindles: 15 kW inverter-driven, liquid-cooled. Tool Taper: HSKF63 Maximum Electrospindle Speed: Up to 24,000 rpm Construction: Welded steel, ribbed, stress-relieved, precision machined from a single setup. Table Type: Beam table Equipment Options: - Schmalz dual-circuit beam system - Schmalz pneumatic and mechanical workpiece clamps - Positioning stops - Dual-zone operation capability - Chip extraction readiness - Chip conveyor - Turret tool magazine and 2 linear magazines (26 tools) - Drilling aggregate: 12 vertical tools, 4 horizontal tools, 2x saw blades - Functions: correction map and intelligent energy recovery Iioden Nv Rcopfx Ahyoh - Advanced safety system - Compatibility with CAD/CAM programming software (for furniture, fronts, stairs, windows, doors, and other components) - Automatic central lubrication - Control cabinet air conditioning - Remote service access, remote diagnostics - Tool diameter and length measuring probe with diameter compensation via control system - Laser projection for workpiece positioning - Machine designed in the Industry 4.0 concept - Tool life option #ploter #CNC #router #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum #BLUM

Condition: used, Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps Iodpfx Ahjrri Thoysih -Grid step: 1200 x 305 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bridge height: 40/9 mm - Gratings: Hot-dip galvanized -Quantity: 2x grids available -Price per piece -Weight: 10 kg/piece

Condition: used, Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps -Grid step: 1000 x 265 mm -Total height: 70 mm -Struts: wall thickness 2/2,5 mm Isdpfx Aherrzc Eoyoih -Bridge height: 30/10 mm -Gratings: Hot-dip galvanized -Quantity: 3x grids available -Price per piece -Weight: 7,7 kg/piece

Condition: used, Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps, perforated gratings -Grid level: perforated grid 800 x 270 mm -Total height: 70 mm -Holes: Ø 8/12 mm -Gratings: Hot-dip galvanized -Quantity: 2x grids available Iiodperrzdmsfx Ahyoh -Price per piece -Weight: 5,8 kg/piece

Condition: used, Gratings, grating, light grilles, insert grilles, insert grilles, stair treads, safety steps, grating step, step -Grating step: 800 x 240 mm Ijdpjrrzd Refx Ahyeih -Total height: 70 mm -Struts: wall thickness 2 mm -Bar height: 25/10 mm -Gratings: hot-dip galvanized -Number: 1x grates available -Weight: 6kg

Condition: excellent (used), Gratings, grating, light grids, insert grids, insert grids, stair treads, safety steps, grating step, step, safety step, perforated sheet step -Grating step: safety step perforated sheet step hot-dip galvanized Iijdewztnkepfx Ahyjh -Type: ID 600x200x45 mm -Number: 6x grates available -Price: per piece -Weight: 3.3 kg/piece

Condition: good (used), Steel staircase, external staircase, machine staircase, machine access, extension staircase, machine platform -Manufacturer: Günzburger, Machine stairs, Machine access -Step size: approx. 600 x 260 mm Iiodpfx Ahoikwgnoysh -Height: upper step 685 mm -Permissible load: 200 kg -Number: 1x staircase available -Dimensions: 650/980/H210 mm -Weight: 14 kg

Condition: new, Year of construction: 2025, The Optimat BD150 Floor grinding machine is the perfect complement to the SDP750 sander. Isdpfstw Smvox Ahysih It is ideal for leveling sanding, sanding wooden surfaces, finishing and renovation work, as well as for stairs, corners and edges. Thanks to its compact size, it ensures precise sanding quality. The edge sander is equipped with a powerful motor and an integrated dust extraction system. The BD150 is suitable for Velcro and screw discs. The tiltable dust extraction pipe ensures that the dust bag is not damaged. Efficiency 5 m2/h Disc diameter 150 mm Engine speed 11,500 rpm Disc speed 3400/3700 ​​rpm Power consumption 1.1 kW Length of long nozzle 481 mm Dimensions (L x W x H) 552 x 246 x 410 mm Weight (without cord) 10 kg Sound power level 80 dB(A)

Condition: used, Gratings, grating, light grids, grid inserts, grid inserts, stair steps, security steps, grating step, step -Grid step: 1200 x 240 mm -Total height: 70mm -Struts: wall thickness 2 mm -Bridge height: 40/10 mm Isdjmxpvfepfx Ahyjih -Gratings: hot-dip galvanized -Number: 6x grids available -Price per piece -Weight: 8 kg/pcs

Condition: new, total length: 5,000 mm, total height: 3,000 mm, total width: 4,000 mm, load capacity: 500 kg, Storage platform 4,000 x 5,000 mm, load capacity 500 kg / m² Included in the scope of delivery: 4 uprights, single-sided 100 x 100 x 3 mm 2 main beams C+300 x 3 x 3,990 mm (perforated) 5 cross beams S+300 x 2 x 4,800 mm (closed) 10 mounting angles 2 diagonal braces 9 chipboard panels P6, 3,000 x 850 x 38 mm, underside white, topside natural including fastening material including load capacity signs Iisdpod Hl D Defx Ahyoh Dimensions, technical data Steel structure: 4,000 x 5,000 mm Floor area: approx. 20 m² Height to top of flooring: freely selectable up to 3,500 mm (other heights available upon request) Clearance height underside: top surface minus 338 mm Load capacity: 500 kg / m² Uprights: 100 x 100 x 3 mm Main beams: C-profiles C+300 x 3 mm (perforated) Cross beams: Sigma profiles S+300 x 2 mm (closed) Flooring: 38 mm chipboard, single-sided white P6 Uprights in the following standard colors: RAL 7035, light gray RAL 7016, anthracite gray RAL 3000, fire red RAL 5003, sapphire blue Other colors available upon request! Accessories, such as stairs, railings, etc., are not included in the scope of delivery. These can be supplied for an additional charge.

Condition: new, functionality: fully functional, Year of construction: 2026, BEFARD XPR500 glass and sandwich panel vacuum suction cup Maximum load capacity 500 kg 1 pc. suction plate 800x400 Remote contro l Single-circuit vacuum system Battery power supply Iedev I Tcvepfx Ahyoih Hook mounting bracket Transport trolley with wheels adapted for transport on stairs A choice of colors.

Year of construction: 2024, condition: new, The UMG-401.17 equipment set is designed for feeding logs with a diameter of 120–600 mm and a length of 2500–3200 mm to woodworking equipment for further processing. This unit includes a Bruks BR1450 log milling machine and a Valan kone VK100 debarker (adapted to birch wood), a Vecoplan VAZ2000 bark shredder. Safe platforms and stairs around the entire equipment unit ensure convenient access during machine maintenance. The Valan kone debarker is protected from environmental influences by a metal frame house. The line throughput before the debarker is 12 pcs/min, after the debarker feeding to the cutting line is 28 pcs/min. Iedpfx Ahov Uh N Djyjih